Stringing Work at 132 KV Pilipokhar ( 400) - Dayalbagh Line Existing on DC Tower and Construction of 132 KV Bay

Survey including preparation of schedule of materials, marking of locations (Route length), GPS Survey of line with co-ordinates of each tower (The length of line shall be authenticated by GPS Survey).

Check Survey.

Cost of excavation of (04 Nos BTM) Gentry foundation pits including all earth work backfilling, levelling etc.

Setting of all foundation work but excluding the cost of concreting and excavation (Rate per location) For Gentry.

Cost of concreting of all type of tower foundation including cost of cement, dewatering, shoring, and shuttering, forming curring but excluding cost of reinforcement bars (1:2:4 concreting).

1:2:4 concreting.

1:3:6 PCC concreting.

Installation of steel reinforcement bras in RCC foundation including cost of steel reinforcement bars with cutting, bending, placing, hinding etc. (Including anchor bolt for 04 Nos BTM provided by contractor).

Erection of gantry structure and 132 KV tower X-arm their extensions wherever required including modification by cutting & welding of tower parts all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger number, phase plates, bird guard & punching for 132 KV S/C lines.

Shifting of material as ACSR Panther conductor, insulator disc, Tower Parts and fittings etc. (Provide by department) from 132 KV S/S Job Dayalbagh, Agra to near the site.

Laying, string, tensioning clamping jointing etc. of ACSR Panther Conductor including hoisting of insulators, fitting of all necessary hardware and accessories is fittings Armour rods vibration dampers etc on all three phases of 132 kv SC line.

Dismantling Replacement & shifting of panther conductor between tower to gantry and main gantry to Substation gantry of 132 KV lines (Foundry Nagar, Sadabad, Bhimnagari, Taj, Etmadpur & Dayalbagh) by dismantling of all 3 phase of existing ACSR panther conductor, all hardware fitting & conductor accessories i.e. vibration damper, Insulator/Polymer strings and all) jumpers etc. of existing line, laying, stringing, tensioning, clamping jointing etc of all 03 phase ACSR panther conductor including hosting of insulator fitting of all necessary hardware & accessories i.e. fitting armour rods, vibration damper etc alloy with all related works up to re-energisation of lines and re-rolling of dismantled conductor on empty drum for re-use safely transportation of all removed material to store

Erection of main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structure required for installation of isolators CTs, PTs, LAs and all other equipments. The job consists of shifting of all material i.e. structure parts, nuts, bolts, washer etc. from store to site of erection, erection of structure as per relevant drawing and practices using flats and spring washer with each bolt Matching of holes, cutting, matching of members if required shall also be done by the contractor with out any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost.

Erection of following equipments as per instruction manual of various equipments and technical specifications including shifting of material/equipments from store to erection site including all other associated work to complete the job satisfactory.

145 KV C.B. with its Structure.

145 KV C.T. with junction box.

145 KV P.T. with junction box.

145 KV B.I. with operating mechanism.

145 KV LI. with operating mechanism.

145 KV T.I. with operating mechanism .

120 KV L.A. with surge counter.

132 KV Relay Panel.

132 KV Control Panel.

Cutting straightening bending laying 800mm below in side ground and above ground of following size of MS flat for earthing of main and auxiliary structure & equipment structure T/F body and its neutral etc. including welding with main earth mat and with object to be earthed excavation of trenches, its back filling, painting and all other associated work as required complete the work satisfactorily excluding the cost of MS flat.

Laying of following sizes of control cable in the cable trench from control relay panel to various equipment marshalling boxes/junction box etc, in switchyard as per cable schedule, its sadding at every 750mm distance with MS saddles of size 25x3mm size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per technical specification.

2Cx2.5 Sq mm

4Cx2.5 Sq mm

6Cx2.5 Sq mm

Preparation of inter connection diagram and cable schedule as drawing to complete above job including CB,CT,PT,Panel and isolators etc.

Termination of following sizes of cable as laid above as per cable schedule including making necessary holes in glands plates or box wherever required, supply and fixing of cable glands of appropriate size, supply and providing ferrules and Nos, for each core, (The rates of termination of control cable include the all cores of cable at one end with lug)

2Cx2.5 Sq mm

4Cx2.5 Sq mm

4Cx2.5 Sq mm

132 kv bay Jumpering work between all equipment and Bus by Panther Moose conductor including cutting laying fixing and proper tightening with the help of skilled labour and T&P.

Making of Delta earthing for 132 KV LA's of fabrication of delta set 06 Nos.with 40mm/36mm dia. size 3 Mtrs. Long electrodes its placing inside the earth below 0.8 mtr. deep including excavation and refilling of soil and connecting all the six electrodes with 75x10mm M.S flat 800mm deep by Cutting Straightening, bending, welding & laying of MS Flat/MS round.

Supply & fixing of 120 watt LED street light latic structure or 132 & 33 KV GI pipe bracket complete, LED light with high power LED and unified lux value up to ensure uniform light distribution, luminaries single piece aluminum body suitable for 120-watt LED on GI pipe bracket complete in all respect including cost of lamp internal control gear Cat-"A" Philips/Bajaj/Crompton make. This work including cable connection and all other associated work to complete the job as per technical specification including cost of man, material & T&P etc.

Providing and fixing of junction box of size 400x190x95 mm made of SMC (Sheet mounding compound) Sintex or Equivalent make ISI mark with the help of brackets duly fixed with structure by nuts and bolts. The box consists of 01 No. 6 Amp. MCB havells/L&T make, glands and Bakelite terminal strip of 08 Nos terminal both should be fixed in the box duly connected with cables. (Connection power cable will be provided by department)

Supply and fixing of '2' dia MS Pipe of B class 1.2 meter long filled at latic structure suitable for 120 watt LED street light luminaries

Laying of 2x2.5/4x2.5 sq mm PVC cable 50cm. Blow the ground level in PVC conduct pipe after excavation and back fitting including all labor PVC pipe etc.

Providing & fixing of outdoor 3 phase Ac Supply cubical box of size 1200x600x500mm duly painted with synthetic enamel paint 4 No aluminum insulated bus bar for AC distributional and single phase double MCB of rating 16 Amp 12 No & 100A MCB Isolator -01 No. & fixing of 30No. Terminal block of rating 16 Amp Cubical box of 16 SWG sheet in double shutter with indoor locking arrangements with wiring of proper size and phase indicator .

Supply

Bus Post Clamp suitable for Panther conductor

PG Clamp Suitable for Tarantulla to Panther

PG Clamp Suitable for Panther to Panther

Vibration Dampers

Mid span compression joint

Repair sleeves

Phase Plate in sets of red, blue and yellow for tension tower

Pipe type earthing material

Single tension fittings

Single suspension fittings for pilot string

Supply of Portable AFF mechanical foam type fire extinguisher complete with initial change hose pipe and all other accessories and fittings as per IS 1024 trolley/wheel mounted 45/50 liter capacity

Supply of 22.5 Kg fire extinguisher carbon dioxide as per IS specification. No. 2878/1986 and as per technical specification

Supply of dry chemical powder type fire extinguisher of 4.5 Kg capacity conforming with IS 2171/1985 and as per technical specification.

Supply of sand buckets as per technical specification

Supply of copper flexible bond of 16x450mm size with copper lug fitted at both end having hole of 15mm dia in one lug and 12mm dia on other lug as per each specification enclosed.

Supply of cable gland suitable for following size control cable.

2x2.5 Sq. mm

4x2.5 Sq. mm

6x2.5 Sq. mm

Zain Enterprises

ASHUTOSH ENTERPRISES