ADDN/ ALTN TO CERTAIN OFFRS MD ACCN UNDER GE NORTH MEERUT CANTT

Amount

ITEMS OF B/R

Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.

Demolition stone slabs and tiles of any description or thickness in floors/ dado etc., laid bedded and pointed in any mortar, complete all as specified.

Dismantling of un-framed work timber scantling 40 sq cm and over in section, in any position complete all as specified and directed.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified.

Demolition of brick masonry built in cement mortar incl all quoins arches, pillars etc complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed,

M&L Brick masonry with fly ash bricks straight or curved on plan exceeding 6m mean radius, old size bricks, built in Cement Mortar (1:6) complete all as specified and directed.

All as per item No. 08 above but except bricks. Note:- Serviceable bricks retrieved from Serial item No. 5.00 shall be used.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work all as specified and directed.

M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required up to 3.50 Mtr height building.

M&L for Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required exceeding 3.5 Mtr but n.exc 7.00 Mtr height building.

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish including formwork complete all as specified and directed. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : (Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account).

Supply only TMT steel bars for reinforcement in required length and dia, complete all as specified and directed.

Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and directed.

Demolition of cement concrete/lean concrete/brick bats from sunken portion exceeding 15cm above ground floors and removing excavated materials upto a total distance of 250 mtrs complete all as specified and directed.

Material & labour for sunken slab treatment comprising of the following :- (a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250m complete all as specified and directed. (b) Material & labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) over cleaned sunken slab surfaces. (c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumen grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 200 ml per bag of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level. (g) Supply & fix of 40 mm dia GI pipe medium grade, 450mm long (for draining out the water), as in spout for sunken floor, fixed as in wall, inside end fixed with wire netting & external bevelled edge at 45degree, complete all as specified and as directed.

M & L for cutting of bushes small trees ( Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas, wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 (12.5 mm graded stone aggregate) / Brick work in CM 1:4 as required at site and complete all as specified and as directed.

M & L for first quality, joint free Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

M & L for first quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

All as per item No 21 above but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as directed by Engr-in-charge.

M&L joint free vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white or coloured cement with pigment to match the shade of tiles, complete all as specified.

All as per item No 24 above but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as directed by Engr-in-charge.

M & L first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.

Material and labour, 18-20mm thick granite ( of any type) work (table rubbed and polished ) in window cills, cooking plateform, shelves and the like, over and including 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for PCC (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling, sub base and mass concrete, complete all as specified.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L stone slabs 50 mm thick cement mortar 1:4 dressed true and square in one length not less than 60 cm and n.exc. 120 cm in copings, window cills, chajjas, sunshades etc punched dressed on exposed faces and self faced on the embeded unexposed beds and joints exposed edges round or chamfered , set, jointed and pointed in mortar as in plinth pretection complete all as specified and directed.

Material and labour, 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified

Material and labour, machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Rounding to edges of stone slabs one edges such as in steps, cooking platform and other similar situations

M&L for Reinforced cement concrete M-25 (Design Mix), as in slabs supported on walls, beams and columns, shelves and the like work, complete all as specified.

S&F Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

Use & waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work; with rough finished surfaces of concrete, complete all as specified and directed.

S & F in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified.

S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed

S & F in repairs stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge.

S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100 mm dia of PTMT fixed on floor/ nahani trap with cement mortar, fixed in repairs, complete all as specified and directed.

S & F in repairs 15mm ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe (Minimum weight 142 gms) complete all as specified and directed.

S & F in repairs 20mm ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

Supply and fix Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to wate pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed by Engineer - in -Charge.

S&F Plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed Make - Jaquar, Parko, Gem or equivalent

S&F Chromium plated brass shower rose 125 mm sizewith or witout swivel joints including fxing with 15 mm bore pipe, fixed in repairs, complete all as specified.

S&F Towel rail 600 mm long, 20 mm dia, ‘D’ type, brass, chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified.

S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repair CP Brass Soap Dish complete all as specified and directed.

S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and directed.

S& F in repairs waste coupling of PTMT of size 32 mm complete all as specified and directed.

S & F for PVC heavy duty waste pipes of 40/32 mm dia suitable for wash basin/ sinks complete all as specified and directed.

Dismantling of PVC water storage tanks of capacity exceeding 250 litres but not exceeding 500 litres, including removal of rubbish outside MoD land, complete all as specified.

Dismantling of PVC water storage tanks of capacity exceeding 500 litres but not exceeding 1000 litres, including removal of rubbish outside MoD land, complete all as specified.

S & F Rotational moulded polythelene, double layered, water storage tanks of capacity 500 litres (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

S & F Rotational moulded polythelene, double layered, water storage tanks of capacity 1000 litres (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, including removal of rubbish outside MoD land complete all as specified.

Cutting holes into or through brick/ concrete walls built, in cement mortar, exceeding 150 Sqcm but not exceeding 400 Sqcm in superficial area and making good in cement mortar 1:3 to match with the existing finishes, complete all as specified.

Refixing old steel tubing and connections 15mm dia in new or old position (walls, ceiling, floors etc).

Refixing old steel tubing and connections 20mm dia in new or old position (walls, ceiling, floors etc).

Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed. Note : Extra over for lead joints shall be measured and paid separately.

Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed. Note : Extra over for lead joints shall be measured and paid separately.

Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed. Note : Extra over for lead joints shall be measured and paid separately.

Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed. Note : Extra over for lead joints shall be measured and paid separately.

S & F cast iron bends 75mm bore, diminishing pieces or tapers ISI marked complete all as specified.

S & F cast iron bends 75mm bore, diminishing pieces or tapers fitted with oval access door ISI marked complete all as specified.

S & F cast iron bends (any radius) with duck's foot or heel rest 75mm bore, ISI marked complete all as specified.

S & F cast iron bends 100 mm bore, diminishing pieces or tapers ISI marked complete all as specified.

S & F cast iron bends 100mm bore, diminishing pieces or tapers fitted with oval access door ISI marked complete all as specified.

S & F cast iron bends (any radius) with duck's foot or heel rest 100mm bore, ISI marked complete all as specified.

S & F 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors

S & F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors

S & F 75mm bore branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors

S & F 100mm bore branch pieces, double(equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors

Materials and labour, extra over for lead joints provided in lieu of cement joints for 75mm dia cast iron pipes and fittings, complete all as specified and directed.

Materials and labour, extra over for lead joints provided in lieu of cement joints for 100mm dia cast iron pipes and fittings, complete all as specified and directed.

M & L for cast iron floor trap, 75 mm dia of out let, ISI marked, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified.

S & F 110mm bore PVC (SWR) bends any radius complete all as specified.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified.

S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified.

S&F in repair 5 mm thick glass looking mirror of size 700mmX500mm with double coat for protection and longevity Grounded edges for safety and silver plating on the back for better reflection. Make : CERA Cat: B3510110, B3510106, B3510111

S&F in repair stainless steel plate rack of size 75 cm x 60 cm made with 0.80 mm thick sheet including taking out existing wooden plate rack complete all as specified and as direcetd.

S & F PVC Bath cabinet with mirror of size 18" X 22" X 4.25 " complete all as specified.

S&F sheet glass shelf assembly consisting of not less than 5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair in fancy type brass CP hot and cold centre hole wash hand basin mixture swan neck, 15 mm bore screwed down high pressure with long screwed shanks and fly nuts screwed to iron pipe complete all as specifieed and directed. MAKE :- Pearl Cat part No ARI-013, PRAYAG-LAGUNA -9350.

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations etc. or for cesspits etc. and not exc. 10 Sq. m on plan and not exc. 1.5 metre in depth and getting out complete all as specified.

Returning, filling in, of soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified.

Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point in soils, complete all as specified.

Taking down shutters of any description not exceeding 1 Sq. m each, from chowkhat, complete all as specified

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

Resecuring or easing and adjusting without taking down shutter from the frame & re-fixing builders hardware as required including removal of unserviceable screws etc. not exceeding 1 Sq.m each, complete all as specified and directed by Engineer - in -Charge.

Resecuring or easing and adjusting without taking down shutter from the frame & re-fixing builders hardware as required including removal of unserviceable screws etc. area exc 1 Sq.m but not exc 2 Sq.m each, complete all as specified and directed by Engineer - in -Charge.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete as specified and directed.

S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling PCC (1:3:6), type C-0, complete as specified.

S&F IInd class hard wood plain, solid, straight chowkats and frams wrought, framed rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Factory made shutter, 35 mm thick, 2nd class hardwood (Hollock) rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I) and as specified in SSR Part-I section 8 clause 8.24(a), kiln seasoned and chemically pressure treated, complete all as specified.

S&F 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified.

S&F Factory made flush shutters 30 mm thick, ISI marked, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: Cost of stainless steel butt hinges and necessary S S screws shall be included in this item.

S&F Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm, ISI marked, complete all as specified.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete.

S&F 200 mm aluminium anodized, barrel tower bolts of extruded section.

Supply and fix 100mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed.

Supply and fix 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete.

S&F 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing block board 18/19 mm thick, grade 2 quality, interior grade, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30 mm wide flap (when open), fixed in repairs, complete all as specified.

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified.

Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Supply and fix in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed.

S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New wooden required for glazing glass in wooden window will be paid for separately.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

S&F 25 mm dia stainless steel curtain rod with fancy type bracket and ring ( 08 Nos/ RM) complete all as specified and as directed.

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars,aluminium sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with clips,frame,necessary joining cleats,glazing clips,neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges,handles and tower bolts including locking arrangements including powder coated anodised aluminium frame,grill with one or more rebates incl S&F 5.50 mm thick black glass complete all as specified and directed by Engineer-in-Charge.

M&L for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

M&L for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

M&L for factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

M&L for factory made box type steel ventilator without glazing bars dovetailed or welded for fixing wire and with one shop coat of zinc chromate primer complete all as specified.

S & F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified.

S&F Mild steel door spring 300 mm, ordinary rat tail rod pattern spring including roller and roller plate, fixed in repairs, complete all as specified.

Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, including removal of rubbish outside MoD land, complete all as specified.

Dismantling mild steel work of any description not otherwise provided for.

Demolition of cement concrete (reinforced) as in roofs, floors, beams, staircase landing, chajjas, balconies and similar suspended work chajjas, facia and the like complete all as specified.

S & F, 1 mm mild steel, plain black sheet in steel gate or similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to steel framing with riveted or welded seams, including bending or turning up complete all as specified.

Three coats of white wash including preparation of new plastered wall surfaces of any description complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmper over a coat of primer & chalk whitening & smoothening of surface, complete all as specified and directed.

M &L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified

Preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified

Preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed.

Preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed.

Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and directed by the Engineer-in-Charge.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-740022

Complete removal of existing treatment ( from plastered / pointed surface) of wall by mechanically means of surfaces & levelling/ edging the disturbed places/ edges using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Complete removal of existing treatment and preparation of old plastered surfaces by applying wall care putty averaging thickness 2 mm and rubbing with sand paper for making smooth surface and applying two coat of exterior emulsion paint over one coat of primer through roller, complete all as specified and directed .

M&L for 10 mm thick plaster on roofs in cement mortar 1:4 mixed with using water proofing compound (liquid) @ 200 ml per 50 kg of bag of cement including finishing the surface even and smooth without using extra cement for laying water proofing treatment, complete all as specified and directed. Note:- Water proofing compound (liquid) shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 50 mm thick (average thickness) PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in padding on roof finished the surface even and fair without using extra cement complete all as specified and directed.

M&L for cleaning the roof surface inc taking out vegetation, debris and previous treatment on roof completely incl removal of screed bed/ conrete bed/ plaster/ mud phuska or any other tretament carried out previously over roof suface and making the mother slab (Roof slab) completey visible prior to carrying out any other treatment complete all as specified and directed.

M&L for repairing the cleaned surface through repair mortar and applying priming coat of epoxy primer with resin and hardner in 1:3 ratio with water dilution as per manufacturer instructions, applying 2 coats of solvent based Polyurethane liquid applied membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/sqm (each coat), 2nd coat should be applied once 1st coat becomes dry completely all as specified and directed. Make: Asian Paints\ Thermax. Note:(i) The work under this item shall be carried out by the authorized applicator of Manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of waterproofing treatment under this item for a periof of 10 years from the date of completion along with manufacturer warranty of material for the same period. (II) Ht. of bldg is 06 meters with no staricase to reach at the top of the building. (III) Second coat must be applied when 1st coat is completely dry and approved by engg-in-charge

M&L for APP based polymeric membrance minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced duly protected on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch) ,and there over applying a tack coat of 85/25 blown grade bitumen conforming to IS :702 @ 1.2 Kg/Sqm complete all as specified as per manufacturer's instructions.

M&L for cement concrete tiles 25cmx 25cmx 22mm thick with grey cement and no pigment, machine pressed , set jointed and pointed in neat cement slurry to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F for kitchen cabinet and cupboard shelf made of 18/19mm thick multi- layer ply wood board , grade of 1st quality, exterior grade, commercial type decorative with mica on one face (thickness of mica 0.80mm ) and other side white mica (thickness) of mica 0.80mm fixing with adhesive and stainless steel screw/ nails complete all as specified and directed by Engr-in- charge.

ITEMS OF E/M

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes for 1.2mm with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps.

One fan / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

One Bell point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 02 (c) here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

All as per serial item No 02 (c) here - in - before but with 4 Sqmm nominal cross sectional area copper conductor cable for sheet metal enclosure 20 Amps AC Box.

Supply and fix modular switch ISI marked 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fix modular socket outlet 03 pin ISI marked , 05 / 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge .

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed

Supply and fix in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

S&F stepped type type electronic fan regulator flush type complete all as directed

Supply and fixing bell push flush type , 5 amps , 240 volts

Supply and fixing Bell,AC , 230 volts ,Single poler Cona/Anchor.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.

Supply and fixing LED lamp 2 pin 9 watt.

Supply and fixing LED light fitting 1x20 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.

Supply and fixing 1x36/40W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.

S/F in repairs Fancy light cast Aluminum polyurethane paint(with prior Treatments)bracket with round base with LED Lamp 05 to 11 watts compete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

Material and labour for sub main wiring with 10 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

S&F TPN DB, 4 way, 415 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed.

Supply & fixing four pole Isolator ,415 V, 63A, and making connections complete all as specified & directed.

Supply and fixing MCB, SP, AC, 240 volts 'C' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S & F and grouting in wall sheet metal enclosure factory fabricated with single pole & neutral with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps 240 volts complete all as directed

Supply and fixing MCCB 4 pole,160 Amps, breaking capacity 36 kA, Adjustable type and making connections complete all as specified and directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 54 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal double door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

supply and fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, RPM 1200, copper winding of sweep 250mm complete all as directed.

supply and fixing Exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers complete all as directed.

Supply and fixing fan ceiling complete with blades, down rods, electronic regualtor and accessories ,230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE rated with Brushless direct current motor (BLDC) complete all as direced.

Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, complete all accessories such as safety valve, thermostate, NRV, connectio piece etc complete all as directed.

Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.

Taking down existing Exhaust fan 250 / 300 mm of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.

Supply & fix PVC connections 15 mm size with PTMT nuts of length 450 mm suitable for hot & cold water connection.

supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 35 sqmm 3.5 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc complete all as specified and directed including taking down old LT UG cable

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ losse soil complete all as specified and as directed.

GI light grade tubing 50mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole

SA construction co. (BID ID -2972526)

mohanlal gupta (BID ID -2971984)

vibha associates (BID ID -2972374)

m/s gupta construction (BID ID -2972298)

Arun Construction Co. (BID ID -2972182)

M/s Shrangi Rishi Construction (BID ID -2976166)

Sudhir Sharma Associates (BID ID -2972305)