CERTAIN B/R REPAIRS TO BUILDINGS OF RESTRICTED AND UNRESTRICTED AREA OF CQA(W), CQA(OFV), SQAE(A), LPR, SQAE(L) AND PERIODICAL SERVICES INCLUDING CLEANING SERVICE ON BLDG WATER TANK OF RESTRICTED AND UNRESTRICTED AREA OF SQAE(A), LPR, TROOPS LINE,

Amount

UNRESTRICTED AREA SCHEDULE

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but not exceeding 0.18sqm etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

M&L for glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm size aggergate) as in floors as sub base using extra cement in patches complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster and grit plaster any description on brick or stone walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work using fly ash bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering on fair faces of ceiling concrete surface of wall 5mm thick in CM 1:3 and to be finished even and smooth without using extra cement and including taken down ceiling plaster complete all as specified and directed.

Providing & laying of Emaco S88 CT or equivalent fibre reinforced pre-packed Polymer Modified cementitious mortar on the sound substrate and making the surface is original shape. Cure it for 3 days.

M&L for preparation of newly plastered surfaces of walls and apply two coat of cement base paint over one coat of primer complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specification as direction (ISI Mark).

S&F 20 mm size of wire mesh netting of mild steel wire 1.40 mm dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.

M&L for water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.

M&L for 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete.

Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.

Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm including cleaning surfaces.

Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard weight not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Applying two coats of bituminous base aluminium paint including preparation complete.

Dismantling water tanks capacity exc 250 Ltr but nexc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr but nexc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I, 500 Ltrs capacity.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I, 1000 Ltrs capacity.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 6 mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board, water resistant, termite resistant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and apply one coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkats or frames nexc1.5 sqm with shutter (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.50sqm but nexc 4 sqm with shutter (without taking off shutters from the frames).

Taking down and removing from site shutter of any description on nexc 1 sqm complete as specifed and directed.

Taking down and removing from site shutter of any decrti on exc 1 sqm but nexc 2 sqm complete as specifed and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

Refixing of shutters of any description nexc 1.0 sqm each, in same opening all as specified and as directed.

Refixing of shutters of any description exc 1.0 sqm but nexc 2.0 sqm each, in same opening all as specified and as directed.

S&F factory made plain framed, 35 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle boar with commercial veneering on both face, the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated.

M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

M&L for 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete.

M&L for 30 mm thick second class hardwood glazed and skelton window, ventilators shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

M&L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.

S&F Butt hinges medium weight cold rolled mild steel 100mm long complete.

S&F Butt hinges medium weight cold rolled staineles steel 75 mm long complete.

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed by Engr-in-Charge.

S&F in repair butt hinges medium weight cold rolled mild steel 100mm long complete.

All as per srl item No 46 here-in-before but 75mm long size complete.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complet.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete.

S&F Aluminium handles cast type anodised of 150mm complete.

S&F Aluminium handles cast type anodised of 200mm complete.

S&F in repair mild steel pressed handles cast type anodised of 150mm complete.

S&F in repair mild steel pressed handles cast type anodised of 100mm complete.

S&F in repair Mortice lock, vertical type size 100 mm 4 lever. Make- Godrej or equavalent as complete all as specified and directed.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete. Note : if applicable welding must arrange welder & rate must be quoted including all.

S&F Floor 50 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring , fixed in floor complete.

S&F in repair Floor 50 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring, fixed in floor complete all as specified and directed.

Solid PVC Door Frame (Single rebated) of size 60mmx 30 mm made out of soild PVC Foam with homogenous fine celluar structure having smooth outer integral skin with 100 x 8 sheet metal CSK SCREWS complete all as specified and as shown on drawing(Note : door frame shall be water proof, termite proof,elegant and should have excellent screws holding strenght to fixed hings and hld door properly for long life).

S&F, Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with free With Wood EPS core, supplying & fixing in frame at site as per specification & drawing.

S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing.

Repairing sunken floor leakage by taking out existing nahani trap/floor traps carefully by digging out from its position and provision of new PVC (SWR) nahani trap nexc 100mm dia and joining the same to existing waste pipe of any dia and ensure leak proof joints including making good the adjoining area to match with existing floor tiles etc with PVC NT/FT grating, complete all as specified and as directed.

S&F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair CP wall Mixer (3 in 1 hole) for mixing hot & Cold water and head shower arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair CP wall Mixer (3 in 1 hole) for mixing hot & Cold water and head and hand shower 1.2 meter long c p flexiable pipe including arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair CP sink Mixer for mixing hot & Cold water arrangement, long shank with swing arrangement suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair CP sink long shank with swing arrangement, suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair CP Piller long shank with fixed arrangement, suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair CP Piller with fixed arrangement,t suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair 20 mm bore stop valves chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

Taking down of eves gutter, rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per Srl item No 74 here-in-before but 75mm bore complete all as specified and directed.

All as per Srl item No 74 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mmby 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un-equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un-equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet,(code ALD 573 of Jaquar or equivalent).

S&F in repair vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china semi-pedeestal pattern (Anglo indian type) (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-Charge.

S&F in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-Charge.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per srl item No 97 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-charge.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA

All as per srl item No 99 above but 20mm dia all as specified and directed by Engr-in-Charge.

Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge.

All as per srl item No 101 above but 20mm dia all as specified and directed by Engr-in-Charge.

Dismantling of plain/ corrugated steel sheeting, fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete.

S&F, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S& F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F, 6mm thicks non asbestos cement sheet corrugated or semi corrugated sheets in roofs, wall, fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel gate sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed, confirming to FE-2990 ( Gde E-165).

Taken down & remove from site making good jams and surrounding area including puty with two coats OBD finished complete as specified as directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay, complete without glazing bars cooler type window, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S&F 3 mm ordinary glass, type and glazing with beads fixed with m in squares nexc 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S&F in repair for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc complete all as specified and directed.

Providing & injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall & rodding etc. complete all as specified and directed.

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres / m including drilling & plugging holes etc. in apron.

Treatment of soil under existing floors using emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM(1:2) to match the existing floors.

Taken down & remove from site making good jams and surrounding area including puty with two coats OBD finished complete as specified as directed.

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots remove complete existing surface upto mother surface approved by GE then applying one coat of cement base paint on walls complete all as specified and directed.

M&L for one subsequent coat of cement base paint over one coat of cement base paint applied under srl item No 29 above.

M&L for one subsequent coat of oil bound distemper over a coat of the same provided under srl item No 30 above.

M&L for one subsequent coat of white wash over one coat of white wash applied as directed by Engr-in-Charge.

Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.

Preparation of old decorated surface of asbestos based roof or mangalore pattern tile surfaces etc and applying one coat of cement base paint complete all as specified and directed.

Preparation of old decorated surface of asbestos based roof or mangalore pattern tile surfaces etc and applyingtwo coat weather coat paint complete all as specified and directed.

Applying one coats of aluminium paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete.

Preparing surfaces of any description of wood, steel, iron, concrete, brick etc and prepare the base using synthetic enamel paint of size 300 x 300 cm, black paint then writing letter exc 10 cm high but nexc 30 cm high and width as directed with white synthetic enamel paint of superior grade for writing building numbers in complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.

M&L Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4 (1 cement : 4 coarse ) furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2 (1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water expose the stone chippings complete all as specified.

M&L for Preparation of newly plastered surfaces of walls and apply three coat of cement base paint complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying one coat of exterior emulsion paint white or tinted complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying subsequent coat of exterior emulsion paint white or tinted complete all as specified and directed under srl item No 135 above.

M&L for French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats on old work etc complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed and incl Sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F 3 mm figured glass, pin head type and glazing with beads fixed with m in squares nexc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete.

Disconnecting 250 Ltr to 500 Ltr existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).

All asper srl item No 141 here-in-before cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

Rotational moulded polyethylene water storage tanks 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

M&L for Grubbing up bushes or trees trunk of girth nexc 10cm, including cutting of tree/bush grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the existing finishes and removal of tree/ bushes from the site, complete all as specified & as directed.

Disconnecting 500 Ltr to 1000 Ltr existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).

All as per srl item No 145 here-in-before cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

Dismantling water tanks 500 to 1000 ltr and removing to store.

S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type including brass and brackets with curtain rings of approved quality etc complete.

Forming V grooves in plaster nexc 10mm deep & n exc 10mm on face and filling with filler all as per manufacturer instructions.

S&F in repair mild steel facny type Nobs and bracket and including all necassary fitting complete all as specified and directed.

M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

RESTRICTED AREA SCHEDULE

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm not exceeding 0.18sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

M&L for Glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5 mm size aggergate) as in floors as sub base using extra cement in patches all as specified and directed by Engr-in-Charge.

Taking down cement plaster and grit plaster any description on brick or stone walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using fly ash bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering on fair faces of ceiling concrete surface of wall 5mm thick in CM 1:3 and to be finished even and smooth without using extra cement and including taken down ceiling plaster all as specified and directed.

Providing & laying of Emaco S88 CT or equivalent fibre reinforced pre - packed Polymer Modified cementitious Mortar on the sound substrate and making the surface is original shape. Cure it for 3 day.

Dismantling/taking down u/s parts of steel rolling shutters (self coiling types shutters i.e push pull machenicaly type with gear operating system and for repairing and overhauling of rolling shutters and greasing/oiling of members of rolling shutters. M&L for preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified. Note : (i) Refixing of rolling shutters duly repaired/ overhauled/ painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of rolling shutters shall be included in the quoted rate of this item. (iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supplying only under the relevent items. (iv) Makes/ Size/ Specifications of new parts of rolling shutters as per existing specificarion of rolling shutters. (v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified, area of rolling shutter 2.12 x 3.072 mtr.

S&F Saftey lever locks mild steel with 4 leavers for rolling shutters.

Supply only MS sheet 1.25mm thick for hood cover complete.

Supplying only curtain ie interlocking lath sections formed from cold rolled steel strip 1.24mm thick complete.

Supply only helical wire spring or flat spiral spring complete.

S&F Ball bearing for rolling shutters.

Supply only 40mm bore pipes heavy weight for suspension shaft complete.

M&L for rough cast wired glass n exc 0.5sqm , 6.4mm thick and glazing with oil putty in square complete all as specified and directed.

Dismantling of plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, including nainital or similar pattern roof covering complete.

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete.

Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.

Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Applying two coats of bituminous base aluminium paint including preparation complete.

Dismantling water tanks capacity exc 250 Ltr but nexc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr but nexc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I, 500 Ltrs capacity.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I, 1000 Ltrs capacity.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S& F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F, 6mm thicks non asbestos cement sheet corrugated or semi corrugated sheets in roofs, wall, fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel gate sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, runing rails and guides) and hanging also fastning and fixing complete all as specified and directed, confirming to FE-2990 (Gde E-165).

Taken down & remove from site making good jams and surrounding area including puty with two coats OBD finished complete as specified as directed.

S&F Steel window with side hung shutters incl projecting type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay, complete without glazing bars cooler type window, dovetailed and welded or ventilators, fixed type, with glazing bar complete all as specified and directed.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S&F 1.5 mm Plain colour PVC sheet fixed or laid on to window with MS FLAT by using, supplying & fixing at site as per specification complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S&F in repair for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-Charge.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engr-in-Charge.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per srl item No 192 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-Charge.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge. Make:- Jandal/ Prakash /TATA

All as per srl item No 194 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge.

All as per srl item No 196 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

Taking down of eves gutter, rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per srl item No 200 here-in-before but 75mm bore complete all as specified and directed.

All as per srl item No 200 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mmby 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames nexc1.5 sqm with shutter (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.50sqm but nexc 4 sqm with shutter (without taking off shutters from the frames).

Taking down and removing from site shutter of any decrti on nexc 1 sqm complete as specifed and directed.

Taking down and removing from site shutter of any decrti on exc 1 sqm but nexc 2 sqm complete as specifed and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Refixing of shutters of any description nexc 1.0 sqm each, in same opening all as specified and as directed.

Refixing of shutters of any description exc 1.0 sqm but nexc 2.0 sqm each, in same opening all as specified and as directed.

S&F factory made plain framed, 35 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle boar with commercial veneering on both face, the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated.

M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

M&L for 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete.

M&L for 30 mm thick second class hardwood glazed and skelton window ,ventilators shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

M&L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.

S&F Butt hinges medium weight cold rolled mild steel 100mm long complete.

S&F Butt hinges medium weight cold rolled staineles steel 100mm long complete.

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed by Engr-in-Charge.

S&F in repair Butt hinges medium weight cold rolled mild steel 100mm long complete.

All as per item No 232 here-in-before but 75mm long size complete.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete.

S&F Aluminium handles cast type anodised of 150mm complete.

S&F Aluminium handles cast type anodised of 200mm complete.

S&F in repair mild steel pressed handles cast type anodised of 150mm complete.

S&F in repair mild steel pressed handles cast type anodised of 100mm complete.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

Providing & injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall & rodding etc. complete all as specified and directed.

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres / m including drilling & plugging holes etc. in apron.

Treatment of soil under existing floors using emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM(1:2) to match the existing floors.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots remove complete existing surface up to mother surface approved by GE then applying one coat of cement base paint on walls complete all as specified and directed.

Preparation of old plastered or un-plastered surface and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for one subsequent coat of cement base paint over one coat of cement base paint applied under Srl item No 246 above.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for one subsequent coat of oil bound distemper over a coat of the same provided under Srl item No 249 above.

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.

M&L for one subsequent coat of white wash over one coat of white wash applied under Srl item No 251 above.

Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old decorated surfaces of Wall and applying one coat of plastic emulsion paint complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

Preparation of old decorated surface of asbestos based roof or mangalore pattern tile surfaces etc and applying one coat of cement base paint complete all as specified and directed.

Preparation of old decorated surface of asbestos based roof or mangalore pattern tile surfaces etc and applyingtwo coat weather coat paint complete all as specified and directed.

Applying one coats of aluminium paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete.

Preparing surfaces of any description of wood, steel, iron, concrete, brick etc and prepare the base using synthetic enamel paint of size 300 x 300 cm, black paint then writing letter exc 10 cm high but n.exc 30 cm high and width as directed with white synthetic enamel paint of superior grade for writing building numbers in complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.

M&L Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4(1 cement : 4 coarse ) furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing ,the top layer with brushes and water expose the stone chippings complete all as specified.

M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

Material & Labour for Preparation of newly plastered surfaces of walls and apply three coat of cement base paint complete all as specified and directed.

S&F 20 mm size of wire mesh netting of stainless stell wire 1.40 mm dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.

Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying one coat of exterior emulsion paint white or tinted complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying subsequent coat of exterior emulsion paint white or tinted complete all as specified and directedunder srl item No 268 above.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed and incl Sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in square nexc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F 3 mm figured glass, pin head type and glazing with beads fixed with m in squares nexc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete.

Disconnecting 250 ltr to 500 ltr existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).

All as per srl item No 273 here-in-before cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

M&L for Grubbing up bushes or trees trunk of girth nexc 10cm, including cutting of tree/bush grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the existing finishes and removal of tree/bushes from the site, complete all as specified & as directed.

Disconnecting 500 ltr to 1000 ltr existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).

All as per srl item No 276 here-in-before cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type including brass and brackets with curtain rings of approved quality etc complete.

Forming V grooves in plaster n exc 10mm deep & nexc 10mm on face and filling with filler all as per manufacturer instructions.

S&F in repair mild steel facny type Nobs and bracket and incl all necassary fitting complete all as specified and directed.

Surfaces of any one coat fire resisting paint description wood, steel, iron, concrete,brick, stone, etc., exceeding 10cm in width or girth.

M&L for one subsequent coat of fire resisting paint over one coat offire resisting paint applied above item No 281 above.

Schedule of credit amount of Rs. 81,763.00 to be deducted during AOC

m/s R K SETHI