Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.0 LAccepted-AOC HOUSE NO 8A OPPOSITE ST JOHN S SCHOOL AK AZAD ROAD REHABARI GUWAHATI ASSAM 781008 | KAMRUP METRO | ASSAM | 781008 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹46.8 L+₹1.3 L (2.81%)Rejected-Finance 0 BINOVA NAGAR KAMRUP ASSAM 781018 UDYAM AS 03 0029196 | KAMRUP METRO | ASSAM | 781018 | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹48.9 L+₹3.3 L (7.34%)Rejected-Finance HOUSE NO 84 SATGAON AMSING JORABAT GUWAHATI KAMRUP METRO ASSAM 781027 | KAMRUP METRO | ASSAM | 781027 | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹53.9 L+₹8.4 L (18.4%)Rejected-Finance OIL INDIA LTD GATE NO 02 PO UDAYAN VIHAR GUWAHATI ASSAM | KAMRUP METRO | ASSAM | 781001 | L4 | Rejected-Finance Other than Lowest Bidder | |
| 5 | L5₹55.6 L+₹10.0 L (22.0%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹44.9 L
EMD Value
₹89,700
Closing Date
9 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Narangi
GE Narangi C/o 99 APO
CERTAIN BR REPAIRS IN JCOOR ACCN IN BLOCK B C D E AND OTM ACCN OF ADM AND ADJOINING AREAS IN THE AOR OF AGE BR I UNDER GE NARANGI
2022_MES_529619_2
8752/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE Narangi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Narangi
₹89,700
Yes
30 Aug 2022
16 Jul 2022
12 Aug 2022
16 Jul 2022
9 Aug 2022
27 Jul 2022
Amount
SCHEDULE 'A' PART-I
Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.
S&F 6 mm thick asbestos cement corrugated or semi corrugated sheet with side lap, fixed with 'L' or 'J' type or cranked hook bolts, nuts & washers etc.complete all as specified and as directed.
Refixing only asbestos cement corrugated or semi corrugated sheet as obtained from dismantling of old sheets with side lap, fixed with 'L' or 'J' type or cranked hook bolts, nuts and washers complete all as specified and as directed.
S&F 6 mm thick asbestos cement two piece adjustable serrated ridge, corrugated or semi corrugated sheet fixed with 'L' or 'J' type or cranked hook bolts, nuts & washers complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers, in roof covering, walls cladding etc, with grade of zinc coating 275 complete all as specified and as directed.
Refixing only galvanised corrugated mild steel sheeting as obtained from dismantling of old sheets here in before with two corrugation side lap, fixed with & including 'L' type or 'J' type or cranked hook bolts in roof covering, wall cladding etc., complete all as specified and as directed.
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M & L mild steel flat iron hold fasts fixed to chowkats complete all as specified and as directed.
M & L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed
M & L for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.
S&F Rolled mld steel roof trusses ( framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat section) including distace pieces, cleats etc confirming to Fe 410-W ( Gde E-250 Quality A)complete all as specified & as directed.
M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.
S&F mild steel Hand rails , half round or other steel section or core for wooden hand rail straight portion , drilled and countersunk for balusters running bars , for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including seccuring bolts ,posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets ( for securing wire mesh etc.) including all neccessary drilling, bolting, or rivetting etc. and similar work conforming to FE-290 Gde E - 165 complete all as specified & as directed
S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.
S&F in repair 5mm thickPVC sheet fillet of width 35mm for wall panelling to make PVc frame including fillets , cornices etc all as specified and as directed.
S&F in repair solid PVC wall lining consisting of 5mm thick single sidwe prelam wood grain printed PVC sheet inclusive of solvent cement and fixed on PVC frame complete all as specified and as directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and as directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 50mm dia and 350mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6mm thick in CM 1:4 mixed with integral water proofing compound on uneven surface to make the surface even, filling it with water for checking dampness and seepage, all junction and walls where CI/GI pipe are passing be sealed with epoxy mortar. Applying two coats of polymer modified cementious water proofing coating of minimum thickness 1mm each layer as per manufacturer's instruction on floor and walls ( upto 100mm above FFL and spraying coarse sand on surface till the seccond layer is green, applying 20mm thick plaster in CM1:4 mixed with WPC of approved make on floors and walls including rounding of corners and junctions towards spouts. All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on CI/GI pipes.. Testing the water proof area by filling water for at least 72 hours and testing for leakage/seepage for the entire satisfaction of Engineer in charge. Applying two coats of hot blown bitumen @1.50kg/ Sqm for each coat and laying 50 micron black polythene film in floors complete.
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for 40mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in floor, finished the surface even and smooth with using extra cement complete all as specified and as directed.
M & L for forming contraction (dummy) joints 65mm deep x10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed.
M & L PCC 1:4:8 Type D-2 ( Using 40mm graded stone aggregate) as in foundation , filling, and mass concrete complete all as specified and directed.
M & L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in surface channel and drain including necessary form work complete all as specified and as directed.
M & Lprecast RCC 1:1.5:3 Type A-1 ( Using 20mm graded stone aggregate) as in cover slab with plain fair faces including chamfers, weathering and setting in CM 1:6 including necessary form work complete all as specified and directed.
M & L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.
M & L PCC 1:3:6 Type C-2 ( Using 40mm graded stone aggregate) as in foundation , filling, and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door/window frame complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.
M & L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".
Supply only integral water proofing compound complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparation of old decorated plastered surfaces of wall including filling the holes and cracks with white cement and applying one coat of oil bound distemper complete all as specified and as directed.
M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.
M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .
M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer including 1 mm thick (average) wall care putty complete all as specified and directed .
M&L for complete removal of existing treatment of wall surfaces, applying two coat of oil bound distemper over a coat of primer including 1 mm thick (average) wall care putty complete all as specified and directed .
M&L Preparing surfaces of wood and wood based materials,steel/metal surface of any description and girth not other wise described and treating small articles such as ends of posts, backs of chowkats,with tar or coal tar black paint etc,area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each complete all as specified & as directed.
M&L Preparing surfaces of wood and wood based materials,steel/metal surface of any description and girth not other wise described and treating small articles such as ends of posts, backs of chowkats,with tar or coal tar black paint etc,area tarred not exceeding 0.1 sqm each complete all as specified & as directed.
M & L for preparing new surfaces of wood and wood based materials of any description exceeding 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M&Lpreparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.
Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.
S&F 30mm thick 2nd class hardwood rail and style plain framed panelled shutter ( any No. of panels) with lock rail and panel of 9mm BWP commercial ply of 12mm veneered particle board with commercial veneering on both faces. The size of rail and style shall be as per IS 1003 ( Part-1) kiln seasoned and chemically complete all as specified and directed.
S&F three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete like 5.00 mm thick glass panes, rubber beading, etc. complete all as specified and as directed. (Refer Jindal Cat M-2016 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.3 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.3 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.3 mm thick (20689) (iv) Frame bottom :- 75 x 26 x 1 mm thick (20671) (v) Frame top and sides :- 75 x 26 x 1 mm thick (20672)
S & F two track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete like 5.00 mm thick glass panes, rubber beading, etc. complete all as specified and as directed. (Refer Jindal Cat M-2016) Aluminium sections : 'A' series (i) Shutter bottom & top :- 43 x 14.7 x 1.2 mm thick (20688) (ii) Shutter interlock :- 37.50 x 20.5 x 1.5mm thick (20655) (iii) Shutter side (Handle) :- 43 x 14.7 x 1.2 mm thick (20688) (iv) Frame bottom :- 50.3 x 26 x 1.2 mm thick (20669) (v) Frame top and sides :- 50.3 x 26 x 1 mm thick (20670)
S & F anodized aluminium push pull type glazed door shutter single leaf including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, 5 mm thick float glass tinted quality on both panels complete all as specified and as directed. (Refer Jindal Cat M-2016) Aluminium sections : 'A' series (i) Shutter top, bottom & middle rails :- 85.00 mm x 44.45 mm x 1.40 mm thick (19600) (ii) Shutter vertical rail : 47.62 mm x 44.45 mm x 1.35 mm thick ( (iii) Frame top and sides :- 63.50 mm x 38.10 mm x 1.31 mm thick (20027) Note: Door closer shall be measured and paid separately
S & F factory made solid PVC prelam door frame of size 100mm x 45mm made out of 5 mm thick prelam PVC sheet reinforced with MS square tube 15mmX15mm. The two vertical door profiles shall be reinforced with 40mmX20mm MS tube 19 gauge. The door frame shall be fixed to wall using 100mm long MS screws complete all as specified and as directed.
S & F factory made solid panel prelam PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19 gauge thickness and size of 40mmX20mm for stiles, top, bottom and lock rails . MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 30mm width stuck inside with solvent cement f 110mm width forming stiles in which 100mm shall be flat and 5mm shall be tapered, and 5mm thick 135mm wideprelam PVC sheet for top and bottom rail in which 125mm shall be flat and 5mm shall be tapered on either side of panel and for lock rail 145mm sheet, 125mm shall be flat and 5mm tapered on either side, additional 5mm thick PVC strip stuck inside of C channel and prelam PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementcomplete all as specified and as directed.
S&Fbox type steel window with side hung shutter both mosquito prooof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.
S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .
S&F stainless steel butt hinges 100 mm long complete all as specified and as directed.
S&F stainless steel butt hinges 75 mm long complete all as specified and as directed.
S&F in repair mild steel steel butt hinges 50 mm long complete all as specified and as directed.
S&F in repair mild steel steel butt hinges 75 mm long complete all as specified and as directed.
S&F in repair mild steel steel butt hinges 100 mm long complete all as specified and as directed.
S&F in repair100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 100mm size extruded aluminium handles, febricated type, anodised complete all as specified and directed.
S&F in repair 150mm size extruded aluminium handles, febricated type, anodised complete all as specified and directed.
S&F 150mm size extruded aluminium handles, febricated type, anodised complete all as specified and directed.
S&F 100 mm size aluminium alloy handles, febricated type, anodised complete all as specified and as directed.
S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed
S&F in repair 300mm mild steel sliding door bolts, plate type stove enamelled black, with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F in repair100 mm long aluminium anodised safety type hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F in repair125 mm long aluminium anodised safety type hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .
S&FAluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
S&F in repair stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed light coloured/printed ceramic tiles 300x200x7mm/350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) including dismantling of old tiles of any description complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.
M&L for 18 to 20 mm thick granite (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in white cement 1:2 using granite dust with admixture of pigment to match with the shade of granite work including rounding of exposed edges of granite over and including 15mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
M&L for 18 to 20 mm thick marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in coloured cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work including rounding of exposed edges of marble over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 20 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
M & L for 3- layer PP-R (Polypropylene random copolymer) pipes 15 mm dia outer dia ,SDR 7.4 (PN-16) pipes UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random lain in trenches including taking out the old existing unserviceable pipes of any type complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks of capacity upto 1000 litres and from mouth of circulating pipes and writing the date of cleaning on water tank with white paint complete all as specified and as directed.
S & F in repairs 20mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
S&F in repairs, PTMT bib taps 15mm dia standard any colour screwed doen for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.
S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repair, 15mm dia stop valves stop cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type) complete all as specified and as directed.
S & F in repairs, mild steel PVC coated coloured 25 mm dia drapery rods for curtains including decorative end holders and brackets (wall to wall or flush to wall) for securing curtain rod,complete all as specified and directed .
S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.
S & F in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.
S & F in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.
S&F in repair 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.
S&F in repair 15mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 142 gms) complete all as specified & as directed.
S & F in repairs, waste coupling of PTMT 40mm (half or full thread) complete ( minimum weight -60gms) all as specified and as directed.
S & F in repairs, waste coupling of PTMT 32mm (half or full thread) complete ( minimum weight -45gms) all as specified and as directed.
S&F in repairs, chromium plated grating without hole 100/125mm dia fixed with cement complete all as specified and as directed.
S&F in repairs, chromium plated grating with hole 100/125mm dia fixed with cement complete all as specified and as directed.
S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed
S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.
S&F in repair vitreous china bowl, urinal flat back, size of 465X 355 X 265 mm white ( minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc. complete all as specified and directed.
S & F in repairs, chromium plated waste coupling 32mm (half or full thread) complete all as specified and as directed.
S&F in repair aluminium door seal complete all as specified and directed.
S&F in repair PVC waste pipe of size 40mm dia for sink complete all as specified and directed.
S&F in repair PVC waste pipe of size 32mm dia for wash hand basin complete all as specified and directed.
S&F in repair glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directed Make Paryag Cat no. BEA-47 or equivalent as approved
S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and as directed.
S & F in repairs,0.56mm thick plain aluminium sheeting alloy 31000H4 for repair of door in lower portion complete all as specified and as directed.
S & F in repairs, round moulded PVC water tank lid for 500&1000 litres tank complete all as specified and as directed.
S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.
S&F in repair soap dish chromium plated fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed
S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.
S&F PVC connections 15mm dia with PTMT nuts of length 600mm complete all as specified and as directed.
S&F PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.
S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S & F in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,900mmX900mmX250mm fixed to wall with screws complete all as specified and as directed.
S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repairs, 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repairs, 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.
S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.
S & F in repairs, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.
S&F 75 mm dia PVC (SWR) bends of any radius with with duck foot or heel rest fitted with oval access door complete all as specified and directed.
KAMAKHYA CONSTRUCTION & BUILDERS
PARAS ENTERPRISE
S. R. TRADING
U S CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .