REPAIR / REPLACEMENT OF JOINERY, PLUMBING FITTINGS ETC, AND ALLIED B AND R IN MD/OTM ACCN OF INF BN AT DHANA MIL STN

Amount

Taking down wooden chowkhat or frame area exc 1.5 Sqm and not exc 4 Sqm Each with shutter (without taking off shutter from frame) complete all as specified and directed by Engineer-in-Charge.

All as per item No 1 above but not exc 1.5 Sqm Each

Taking down wooden shutter of any descripton exc 1 Sqm and not exc 2 Sqm Each complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkats with coal tar/black paint complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc,complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of Ist class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35 mm thick framed, factory made panelled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), cleaned seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 30 mm thick Flush shutters, solid core construction, and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge

Supply and fixing powder coated anodised aluminium frame Minimum thickness of 1.5 mm for doors, windows, ventilators with one or more rebates, including jointing cleat for fixing etc. as complete all as specified and directed by Engineer-in-Charge. Note :- Minimum thickness of powder coating 50 micron

Supply and fixing aluminium anodised powder coated door shutters of aluminium section Minimum thickness of 1.5 mm including necessary jointing cleats, glazing clips, ruber neoprene packing , aluminium anodised powder coated fittings such as handle 2 nos, 100mm hinge 3 nos , 200 tower bolt 2 nos , mortice lock including keys 1 set , anodised aluminium snap beading & screws complete all as specified and directed by Engineer-in-Charge. Note :- Minimum thickness of powder coating 50 micron

Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ) , hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt ( 2 nos) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of andles and fixing approved anodised aluminium standard section around the opening, all complete as per equirement and as complete all as specified and directed by Engineer-in-Charge.

Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in charge. complete all as specified and directed by Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing in repairs 15mm bor 3-hole wash hand basin mixer with pop up waste system to mix hot and cold water fixed to iron pipe or PVC connection complete complete all as specified and directed by Engineer-in-Charge.

Material & labour mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confiRming to Fe 290.Gde-E-165, complete all as specified and directed by Engineer-in-Charge.

Material & labour in Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round haded screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires.complete all as specified and directed by Engineer-in-Charge.

Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as specified and directed by Engineer-in-Charge..

Supply & fixing tinted / coulered floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4 mm thick complete all as per specified and directed. Make:- Modiguard/ saintgobin / Hariyana glass complete all as specified and directed by Engineer-in-Charge.

Supply & fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed by Engineer-in-Charge..

Supply & fixing in repair Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing inrepair steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete all as specified and directed by Engineer-in-Charge.

Material & labour 150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Demolition of brick / stone masonry built in cement mortar, complete all as specified and directed by Engineer-in-Charge.

Material & labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge..

Material & labour for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), including preparing new plastered surface of wall and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including preparing new plastered surface of wall and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for Double action Floor Spring Hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixe for toughened glass door etc , complete all as specified and directed by Engineer-in-Charge.

Dismantling of tiles of any descriptions in floors or dados etc. including cement mortar bedding (but not backing). complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in cooking plateform etc. and other similar situation complete all as specified and directed by Engineer-in-Charge.

Material and labour for for 15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking plateform complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6. complete all as specified and directed by Engineer-in-Charge.

Material and labour for15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing complete in skirting over and including backing coat in cement mortar 1:4, 10 mm thick ccomplete all as specified and directed by Engineer-in-Charge..

Material & labour for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in floor,sub basecomplete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation and path and hardstandingh, filling etc. complete all as specified and directed by Engineer-in-Charge.

Material & labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid with Grey cement and pigment all as specified and directed by Engr in charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed by Engineer-in-Charge..

Supply & fixing in repair 15mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed by Engineer-in-Charge..

Supply & fixing in repair 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed by Engineer-in-Charge..

Supply & fixing in repair vitreous china wash basin white flat / Table top back size 550x400mm including PVC waste pipe , CP pillar tap Sawn neck CP waste coupling brackets , PVC conncetions 15mm dia 450mm long ccomplete all as specified and directed by Engineer-in-Charge..

Supply & fixing in repair Bib tap 15mm standerd of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed ccomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair 15mm stop valve standerd of cast copper alloy with crutch or butterfly handlehigh pressure screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 grms ) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern ) white including plastic water closet set black closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrengement with 1.00 mtr long flexible pipe for fixed with suitable system complete all as specified and directed by Engineer-in-Charge.

Supply & fixing as in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, and PVC connection 15mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 20mm dia brass CP tubular towel rail D type 60 cm long fixed with bracket complete all as specified and directed by Engineer-in-Charge..

Supply & fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair vitreous china Half Stall type urinal (minimum), with grating and union for discharge pipe (including flush pipe , and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 and incl 60cm long brass screws pointing around urinal back in cement etc complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level), complete all as specified and directed by Engineer-in-Charge.

Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design,complete all as specified and directed by Engineer-in-Charge.

Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in forming and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight,complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge..

All as per item No 20 above but one coat of synthetic enamel paint over old steel surfaces and -ditto-

Material & labour for applying a coat of 1.5 mm thick Birla wall care putty as per manufacture instruction ccomplete all as specified and directed by Engineer-in-Charge.

Material & labour for complete removal of existing treatment by scrapping, wire brushing from old walls and applying two coats of oil bound distemper including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Supply & fixing HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed by Engineer-in-Charge.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 18185.00 /- ]

M/s DS Khekde (BID ID -3373315)

m/s mahendra kumar khare contractor (BID ID -3374531)

SUNIL KUMAR KORPAL (BID ID -3382299)

Pandey Construction and Engrs (BID ID -3385426)