Thanjavur District - Thanjavur Block - Construction of Community Hall in Maruthakudy panchayat under MPLADS 2023-24

Amount

Construction of Community Hall in Maruthakudy panchayat

Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m and clearing and leveling the site etc. complete complying with standard specification.

Supplying and filling in foundations and basement with filling M- sand in layers not exceeding 15 cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications.

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete.

Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Brick work in following Cement Mortar 1:5 using best quality II class table moulded bricks 8"3/4 x 41/4" X23/4" for foundation and basement including curing etc.,complete complying with standard specification.including scaffolding curing cost of reinforcement etc.all complete as per specifications and drawings as directed by the Engineer in-charge. (Below Basement)

Brick work in following Cement Mortar 1:5 using best quality II class table moulded bricks 8"3/4 x 41/4" X23/4" for foundation and basement including curing etc.,complete complying with standard specification.including scaffolding curing cost of reinforcement etc.all complete as per specifications and drawings as directed by the Engineer in-charge. (Above Basement)

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). (Below Basement)

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). (For Column)

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). (Above Basement)

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). (For Sunshade)

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). (Above Basement)

Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Weathering Course Concrete using best quality broken brick jelly of 20 mm uniform gauge in pure slaked lime ( NO Sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layer and consolidated to the required slope and finished thickness and beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime, jiggery water etc. complete complying with standard specifications and as directed

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with CM 1:3 to 10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete

Plastering with CM 1:5 to 12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining,curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers).

Paving the Floor with Vitrified tiles in CM 1:3 20mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Paving the Floor with Ceramic tiles in CM 1:3 20mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Dadooing with glazed tiles of size 300 x 200 x 6mm including cost and conveyance of all materials to site and all labour charges etc complete

Supply and fixing of the steel main doors D inclduing cost and conveyance and labour etc., complete

Supply and fixing of the steel doors D1 inclduing cost and conveyance and labour etc., complete

Supply and fixing of the PVC door D2 inclduing cost and conveyance and labour etc., complete

Supply and fixing of the steel window W inclduing cost and conveyance and labour etc., complete

Supply and fixing of the steel window W1 inclduing cost and conveyance and labour etc., complete

Supply and fixing of the steel ventilator inclduing cost and conveyance and labour etc., complete

Supply and fixing of 110mm PVC pipe including cost and conveyance of all materials etc., complete

Filling 40mm ISS HBG metal etc. complete

Filling 20mm ISS HBG metal etc. complete

Supply of Manhole cover 60cm x 60 cm 2 Nos

Paving the flooring with special type of Pre-polished Concrete Anti-Skid Step Tiles of 20mm thick (20mm thick) in CM 1:3, 20mm thick

Painting Two Coats of OIL Bound Distember of approved colour over one Primer Coat including cost of Paint and labour chargesetc complete

Painting Two Coats with exterior emulsion of approved colour over one Primer coat including cost of Paint and labour charges etc complete

Painting two coats with ready mixed paint including cost and conveyance charges etc.

Towards conveyance charges for steel door, windows, ventilators from Office to work site

Fixing Charges for Steel Windows in Position etc complete

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW box 150 mm x 100 mm x 113 mm for 5 A 3 Pin non inter locking cs plug with painting of suitable colour with contionues earth wire connection of 14 SWG TC Wire for PVC PLUG Point S D No 37

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch with painting of suitable colour for OPEN PVC Light Point and Fan Point ( For Eloctronic Regulator ) S D No 38

Supply and Fixing of 18 W CFL in the existing light point SD 178

Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side Handle ) on suitable T W Box with PWD Earthing ( S D N o 159 )

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade on 7 / 20 G I Bearer wire for Service Connection Mains ( S D No 66)

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single coreunsheathed Copper Conductor of 1100 v Grade in 25 mm dia G I suitable pipe b class suitably bended both ends with necessery angle iron upright and end support For Mains ( S D N o 71 )

Supply and Fixing of Water TIGHT Bulk Head fitting with Guard forincandescent lamp with 60 w Bulb S D No 84

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD No 125

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD545

Supply and fixing of European water closet including cost and conveyance of all materials and all labour charges etc., complete

Supply and fixing of PVC water tank including cost and conveyance of all materials and all labour charges etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

N KRISHNASAMY