Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 CrAccepted-AOC 5 KEDAR APARTMENTS 484 60 PARVATI MITRAMANDAL COLONY PARATI PUNE 411 009 | PUNE | PUNE | MAHARASHTRA | 411009 | ₹4.8 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹5.0 Cr+₹12.7 L (2.62%)Rejected-AOC FLAT NO S 2 SHRI CHINTAMANI S NO 1 1148 MAHAJAN PETH MODEL COLONY SHIVAJI NAGAR PUNE 411016 | PUNE | PUNE | MAHARASHTRA | 411016 | ₹5.0 Cr+₹12.7 L (2.62%) | L2 | Rejected-AOC Other than L1 |
| 3 | L3₹5.1 Cr+₹25.0 L (5.18%)Rejected-AOC 61 LAALA LAJPAT RAI COLONY BHOPAL M P 462023 | BHOPAL | MADHYA PRADESH | 462023 | ₹5.1 Cr+₹25.0 L (5.18%) | L3 | Rejected-AOC Other than L1 |
| 4 | L4₹5.5 Cr+₹69.9 L (14.5%)Rejected-AOC 301 CHAMUNDA ENCLAVE PLOT NO 89 AIROLI SECTOR 8A NAVI MUMBAI 400708 | THANE | MAHARASHTRA | 400708 | ₹5.5 Cr+₹69.9 L (14.5%) | L4 | Rejected-AOC Other than L1 |
| 5 | L5₹5.5 Cr+₹71.1 L (14.7%)Rejected-AOC | ₹5.5 Cr+₹71.1 L (14.7%) | L5 | Rejected-AOC Other than L1 |
Tender Value
₹6.6 Cr
EMD Value
₹6.6 L
Closing Date
10 Sept 2024, 6:00 pmClosed
Chief Engineer Pune Zone
Chief Engineer Pune Zone Dakshin Kaman Marg CAMP, Pune PIN- 411001
PROVISION OF DINING HALL AND ADDITION ALTERATION TO OR BARRACK AND JCO MESS BUILDING NO P-405 AT CME PUNE
2024_MES_656307_1
CA NO. CEPZ/KKE/TOKEN-01 of 2024-25
Open Tender
Civil Works
Lump-sum
540 days
CME Pune
Class A, category a(i)
Also refer NIT
8 documents required · 8 mandatory
₹3,000
GE (CME) Khadki
₹6.6 L
Yes
4 Nov 2024
28 May 2024
17 Sept 2024
28 May 2024
10 Sept 2024
22 Jul 2024
29 May 2024 - 5 Jun 2024
Amount
SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only
Construction of Block of Dining Hall complete all as shown on drawings and all as specified.
NOTE: Schedule ‘A’ Part II to XI items have been Prepriced by MES and the Bidders shall insert their lumpsum cost in green field under Column-6 only.
Total amount of Sch 'A' Part-II (Internal Water Supply)
Total amount of Sch 'A' Part-III (Internal Electrification)
Total amount of Sch 'A' Part-IV (Hardstanding)
Total amount of Sch 'A' Part-V (Sewage Disposal)
Total amount of Sch 'A' Part-VI (Area Drainage )
Total amount of Sch 'A' Part-VII (Chain Link Fencing & Gate)
Total amount of Sch 'A' Part-VIII (Addition / Alteration and Special Repairs B/R Works)
Total amount of Sch 'A' Part-IX (Addition / Alteration and Special Repairs E/M Works)
Total amount of Sch 'A' Part-X (Site Clearance, Excavation and Earthwork)
Total amount of Sch 'A' Part-XI (Demolition / Dismantling)
NOTE: Schedule ‘A’ Part II to X items which are not Prepriced by MES are given in Sch 'A' Part-XII, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.
SCHEDULE 'A' PART-XII (MISCELLANEOUS B/R AND E/M WORKS)
INTERNAL WATER SUPPLY
S&F Two way bib cock, cast copper alloy with crunch or butterfly handle, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for UPVC pipes and fixed all as specified and directed for 16 mm outer dia pipes complete all as specified and directed.
INTERNAL ELECTRIFICATION
S&F Ceiling fan complete with fan blades, down rod, electronic regulator and accessories, 230 Volts, 1400 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC), complete and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F Exhaust fan made from sturdy Engineering plastic, AC single phase, 230 Volts, 250 mm sweep with blades, frame, louvers and shutter including connecting with and including three core flexible copper cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal, fixing the fan with suitable size of nuts, bolts, washers complete all as specified and directed.
S&F Decorative ultra slim with poly carbonate housing with high lumen output, environment friendly energy efficient ready to use pack surface and wall mounted LED batten light fitting (LED tube light fitting 1 x 20/22 W, 220V) with integrated electronic driver and 02 No PVC square blocks of suitable size including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Makes : Makes as per Appendix 'C'.
S&F LED light fitting mirror type with high output diffuser 2 feet 1 x 10 Watt, 230 Volts AC, decorative type with driver holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Havells Cat No LUMILINR+BS10WLED865SPCSS / Halonix Cat No HLB-03-10-CW-AL-SQ / Bajaj Cat No BCLSB 10W WH.
S&F 20 W street light LED fitting for building security, 230 volts AC, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with drivers, lens type with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection, including necessary electrical connection to the fixture with 3 core flexible Copper conductor cable of 1.50 Sq.mm size and 1.5 m long bracket, having 32 mm diameter light grade GI pipe bend to shape required and fixed on walls with and including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. Make: Benlo Cat No BL 18SL20W(XLT) / Halonix Cat No HLSLD-14-20-CWDL-R / Bajaj Cat No ENXT P 24LWH CR PC SD.
S&F Aesthetically designed LED Wall bracket light fitting with B22d lamp holder including 20 Watt LED lamp 230 V AC (Decorative wall fitting) including providing and connection with and including copper conductor flexible cord of suitable cross sectional area of required length from ceiling rose to connector block of fitting complete including testing on completion all as specified and directed. Makes: as per Appendix 'C'.
S&F Miniature Circuit Breaker (MCB) single pole and neutral 240 Volts 50 Hz of current carrying capacity 32 Amp with rupturing capacity 10 KA, 'B' curve, fixed in MCB DB with connection, testing and commissioning, complete all as specified and directed.
S&F Miniature Circuit Breaker (MCB) single pole and neutral 240 Volts 50 Hz of current carrying capacity 6 to 32 Amp with rupturing capacity 10 KA, 'B' curve, fixed in MCB DB with connection, testing and commissioning, complete all as specified and directed.
ADDITION / ALTERATION AND SPECIAL REPAIR B/R WORKS
M&L Cleaning the plastered /concrete surface with wire brush and applying water proofing treatment as under:- (a) Apply a uniform coat of bitumen primer at 0.70 kg/sqm over cement plaster. (b) Providing and laying 3 mm thick, weighing not less than 3.6 kg/sqm, Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester not less than 160 gm/Sqm with thermal insulation matt black finished over bitumen primer [as per Ser No. (a)] and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions. (c) Applying two coats of bitumastic aluminium paint @ 0.15 Kg/Sqm over the membrane all as directed.
M&L Joints free non skid ceramic coloured tiles 8 to 10 mm thick of square or rectangular size, area of each tiles exceeding 0.18 Sq.M but not exceeding 0.38 Sq.M as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar all as specified and as directed.
M&L Joints free non skid ceramic coloured tiles 8 to 10 mm thick of square or rectangular size, area of each tiles exceeding 0.18 Sq.M but not exceeding 0.38 Sq.M as in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of plaster in cement mortar 1:3 all as specified and as directed.
M&L Joints free non skid ceramic coloured tiles 7 to 8 mm thick grade BII matt superior finish first quality of square or rectangular size, area of each tiles exceeding 0.06 Sq.M but not exceeding 0.11 Sq.M as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar all as specified and as directed.
M&L Glazed ceramic coloured tiles of size 300 mm x 450 mm x 7 to 8mm thick as in vertical surfaces, dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of plaster in cement mortar 1:4 all as specified and as directed.
M&L Rendering (Ready Mix plaster) 15 mm thick ready mix plaster in cement mortar (1:6) including dubbing out average 10 mm thick on irregular faces of walls in ready mix mortar of same proportion, over Stone masonry surfaces, complete all as specified and directed.
S&F in repairs, Magnetic catch with plate suitable for cupboard shutters and wooden frame/wood based surfaces including necessary fixtures complete all as specified and directed.
S&F 18/19 mm dia MS pipe powder coated of approved colour as in decorative type curtain rod and securing / fixing the same in brackets, complete all as specified and directed.
S&F CI / MS powder coated of approved colour decorative brackets suitable for fixing 18/19 mm dia MS pipe powder coated decorative type curtain rod including necessary drilling in walls, screws for fixing, as per sample approved by GE, complete all as specified and directed.
S&F Chromium plated Soap dish of approximate size 160 x 160 x 90 mm, any type, fixed to plugs with brass chromium plated screws, complete all as specified and directed.
S&F Stainless steel of grade SS-304 kitchen plate rack of size 31" x 24" x 10" (or nearest size as available in market) made out of 0.63 mm stainless steel sheet, round bars, pipes etc. all as per approved pattern of reputed make as approved by GE, fixed on walls with plugs and brass chromium plated screws, complete all as specified and directed.
S&F in repair PVC waste pipe 32 mm dia with PTMT nuts of length 600 mm, complete all as specified and as directed.
S&F two way Bib cock 15mm dia, fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15mm bore of pipe and fixed, complete all as specified and as directed.
S&F Health faucet chromium plated brass with 8 mm dia, 1 meter long flexible tube & wall hook and fixing to 15 mm bore pipe or pipe connection all as specified and as directed.
M&L Applying acrylic cementitious polymer modified elastomeric waterproofing and protective coating like 'Brushbond' of Fosroc or 'Pidifin 2K' of Pidilite of equivalent in Dr. Fixit on sunken floor as per manufacturer's instructions including 15 mm thick rendering on fair faces of concrete surfaces in cement mortar 1:4 mixed with water proofing compound / liquid, complete all as specified and as directed. NOTE: Water proofing compound /liquid shall be measured and paid at supply only rates separately.
ADDITION / ALTERATION AND SPECIAL REPAIR E/M WORKS
S&F, Switch piano, flush type, single pole, ISI marked, two way 6 Amps 240 volts, complete all as specified and as directed.
S&F Ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brush less direct current motor (BLDC). including taking down old ceiling fan and deposited to E/M store yard all as specified and as directed.
S&F Exhaust fan 300 mm sweep, steel body, single phase, AC 230 Volts, heavy duty, with blade, frame and louvers, shutters including three core flexible cable of required length of size 23/0.0076 from ceiling rose / connector to fan terminal, fixing the fan with suitable size of nut, bolt and washers including taking down old exhaust fan and depositing to E/M store and making good to disturbed wall surfaces complete all as specified and as directed.
S&F Exhaust fan 380 mm sweep, steel body, single phase, AC 230 Volts, heavy duty, with blade, frame and louvers, shutters including three core flexible cable of required length of size 23/0.0076 from ceiling rose / connector to fan terminal, fixing the fan with suitable size of nut, bolt and washers including taking down old exhaust fan and depositing to E/M store and making good to disturbed wall surfaces complete all as specified and as directed.
S&F Decorative ultra slim with poly carbonate housing with high lumen output, environment friendly energy efficient ready to use pack surface and wall mounted LED batten light fitting (LED tube light fitting 1 x 20/22 W, 220V) with integrated electronic driver and 02 No PVC square blocks of suitable size including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Makes: As per appendix 'C'.
S&F LED Light fittings, mirror type with high output diffuser 2 feet , 1x10 Watt, 220 Volts, AC, decorative type with driver holder and LED lamp, Aluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. MAKE : HAVELLS Cat No LUMILINE+BS10WLED865SPCSS / HALONIX Cat No HLB-03-10-CW-AL-SQ / Bajaj Cat No BCLSB 10W WH.
S&F Aesthetically designed LED wall bracket light fittings with B22d lamp holder including 20 watt LED lamp, 240 V AC, all as specified and as directed. (Decorative wall fitting) Make: HALONIX Model No HLWB-01-B22 or equivalent model in other makes as per Appx 'C'.
S&F 20/25 watt LED Post-Top lantern with die cast aluminium spigot, spun aluminium powder coated top cover, aluminium PDC heat sink, opal PC diffuser and acrylic IP 65 protection with impact and corrosion resistant, with driver and lamp complete all as specified and directed. Make: Havells Cat Part No. CORAPLT 25W LED830SSY MTOPC / Halonix Cat Part No. HLPT-S04-20-CW / Bajaj Cat Part No. BGCTNP 20W LED WH.
S&F LED lamp 9 Watt, CDL, B-22 (pin type), 230 V, PF-0.95 (min) all as specified and as directed.
S&F Sheet metal enclosures VTPN as MCCB incomer and MCB SP out going 4 way 415 V AC double door surface/ flush mounting made with CRCA sheet steel, powder coated Cat No 811888 IP 43 protection isolated neutral bar insulated bus bar assembly complete all as specified and directed.
Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 125 Amp 16 KA, suitable for VTPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed.
Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 100 Amp 16 KA, suitable for VTPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed.
S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and neutral (SPN) with current carrying capacity of 63 Amp in the MCB DB complete with connection testing and commissioning all as specified and directed.
S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and neutral (SPN) with current carrying capacity of 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and directed.
S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S&F Electric water heater (Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 Ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece, hot and cold water connection pipe, three pin plug top 15 A capacity etc, all as specified and directed.
S&F Electric water heater (Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 50 Ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece, hot and cold water connection pipe, three pin plug top 20 A capacity etc, all as specified and directed.
Taking down old unserviceable building security light and supply and fix 20 W street light LED fitting for building security, 230 volts AC, outdoor type with high pressure die cast aluminium housing and heat resistant complete with drivers, lens type with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection, including necessary electrical connection to the fixture with 3 core flexible Copper conductor cable of 1.50 Sq.mm size and 1.5 m long bracket, having 32 mm diameter light grade GI pipe bend to shape required and fixed on walls with and including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. Make: Benlo Cat No BL 18SL20W(XLT) / Halonix Cat No HLSLD-14-20-CWDL-R / Bajaj Cat No ENXT P 24LWH CR PC SD.
Horizon Construction (BID ID -3076395)
SHREE KRISHNA INFRASTRUCTURE (BID ID -3081244)
MUKESH CONSTRUCTION CO (BID ID -3079154)
M/s L. K. Agarwal (BID ID -3083857)
Saiprabha Construction (BID ID -3082754)
Arun Kumar Deedwania (BID ID -3081285)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .