REPAIRS CANNING AND POLISHING OF FD AND TP WOODEN FURNITURE INCLUDING SOFA SETS REVOLVING CHAIR AND NON REVOLVING CHAIR AT VARIOUS LABS ESTABLISHMENTS AND MARRIED ACCN AT BANGALORE AND MYSORE AREA UNDER GE I R AND D EAST BANGALORE

Amount

Table Centre (FD-235 & 274) Taking out unserviceable top from table centre, supply and fix new top made of pre-laminated particle board one side teak face exterior grade 18mm thick duly covered with 4mm thick teak wood beading all around top all as specified and shown in drg.

Taking out unserviceable leg from table centre, supply and fix new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front/back rail from table centre, supply and fix new front back rail made of seasoned teak wood matching with existing shape and size complete all as specified and shown in drg.

Taking out unserviceable side stiffners from table centre , supply and fix new side stiffners made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Material and labour for scratching existing polish, filling the cracks, making the surface smooth, material and labour for polishing the table centre with spirit polish complete as directed by the Engineer-in-Charge.

Table Peg (FD-236 & 277) Taking out unserviceable top from table peg, supply and fix new top made of pre laminated particle board one side teak face exterior grade 18mm thick duly covered with 4mm thick teak wood beading all around the top complete all as specified abd shown in drg.

Taking out unserviceable leg from table peg, supply and fix new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front /back rail from table peg, supply and fix new front /back rail made of seasoned teak wood matching with existing shape and size complete all as specified and shown in drg.

Taking out unserviceable side rail from table peg, supply and fix new side rail made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable side stiffners from table peg, supply and fix new side stiffners made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Material and labour for scratching existing polish filling the cracks making the surface smooth, material and labour for polishing the table peg with spirit polish complete all as directed by Engineer-in-Charge.

Teapoy Wooden (FD 232 & 278) Taking out unserviceable top from teapoy wooden, supply and fix new top made of pre-laminated particle board ane side teak face exterior grade 18mm thick duly covered with 4mm thick teak wood beading all around top complete all as specified and shown in drg.

Taking out unserviceable leg from teapoy wooden, supply and fix new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front / back rail from teapoy wooden, supply and fix new front /back rail made of seasoned teak wood matching with existing shape and size complete all as specified and as directed.

Taking out unserviceable side rail from teapoy wooden, supply and fix new side rail made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Material and labour for scratching existing polish filling the cracks making the surface smooth and Material and labour for polishing the teapoy wooden with spirit polish complete all as directed by the Engineer-in-Charge.

Table Writing (FD-249 & 275) Taking out unserviceable top from table writing, supply and fix new top made pre laminated particle board one side teak face exterior grade 18 mm thick duly covered with 4mm thick teak wood beading all around the top complete all as specified and shown in drg.

Taking out unserviceable leg from table writing, supply and fix new leg made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front / back rail from table writing, supply and fix new front back rail made of seasoned teak wood matching with existing shape and size complete all as specified and as directed.

Taking out unserviceable side rail from table writing , supply and fix new side rail made of seasoned teak wood matching with the existing shape and size.all as specified and shown in drg.

Taking out unserviceable stiffener from table writing, supply and fix new centre stiffener made of seasoned teak wood. All as shown in drg.

Taking out unserviceable shutter from table writing, supply and fix new shutter made of pre laminated particle board 18mm thick exterior grade BWR one side teak face duly covered 4mm thick teak wood beading all around the shutter including piano type hinges knob and 6 lever brass lock with duplicate of best quality as directed /all as shown in drg.

Taking out unserviceable back plywood from box of table writing, supply and fix new back plywood made of 6mm thick plywood commercial exterior grade BWR matching with the exiting shape and size.

Taking out unserviceable sides from box of table writing, supply and fix new side made of prelaminated particle board 18 mm thick exterior grade BWR one side teak face matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable drawers from table writing, supply and fix new drawer made of 12 mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR including knob etc. all as shown in Drg.

Material and labour for scratching existing polish filling the cracks making the surface smooth, material and labour for polishing the table writing with spirit polish complete all as directed by Engineer-in-Charge.

Table Bed side (FD-276 & FD / E6 / MAP / 15(R)) Taking out unserviceable back plywood from Table Bed side, supply and fix new back plywood made of 4/6mm thick plywood commercial exterior grade ISI Marked complete all as specified and shown in Drg.

Taking out unserviceable shelves from Table Bed side, supply and fix new shelves made of 18mm thick prelaminated particle board exterior grade duly provided with 3/4 mm thick Teak wood beeding complete all as specified and Shown in Drg.

Taking out unserviceable side from Table Bed side, supply and fix new side made of prelaminated particle board exterior grade duly covered with 4mm thick teak wood beading matching with the existing shape and size complete all as directed by Engineer-in-Charge.

Taking out unserviceable top/bottom from Table Bed side, supply and fix new top/bottom made of 18mm thick prelaminated particle board one side teak face exterior grade complete all as directed by Engineer-in-Charge.

Taking out unserviceable shutter from Table Bed side, supply and fix new shutter made of 18mm thick prelaminated particle board one side teak face exterior grade including handle complete all as directed by Engineer-in-Charge.

Taking out unserviceable drawer from Table Bed side, supply and fix new drawer made of 12mm thick commercial ply including handle complete all as directed by Engineer-in-Charge.

Material and labour for scratching existing polish filling the cracks making the surface smooth, material and labour for polishing the table Bed side with spirit polish all as directed by Engineer-in-Charge.

Table Executive with ERU (TP) Taking out unserviceable Table top from Table Executive with ERU, supply and fix new top of existing size made out of pre laminated MDF board exterior grade 25mm thick as per existing shade and duly provided with PVC edge binding all around the top all as directed by Engineer-in-Charge.

Taking out unserviceable handle from the drawers of Table Executive with ERU, supply and fix of new handle to the drawers complete all as approved by Engineer-in-Charge.

Taking out unserviceable locks from the drawers of Table Executive with ERU make Godrej / Fetherlite or any other make any shape and any size, supply and fix new lock as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable channel from the drawers of Table Executive with ERU make Godrej/Fetherlite or any other make any shape and any size, supply and fix new channel as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable locks from the drawers of Mobile Pedestal make Godrej / Fetherlite or any other make any shape and any size, supply and fix new lock as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable revolving wheel from the Mobile Pedestal of make Godrej / Fetherlite or any other make, any shape and any size, supply and fix new channel as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Table Centre with Glass Top (TP) Taking out unserviceable glass top from table centre, supply and fix new glass top made of 8mm thick tinted glass duly pencil polished edge as per trade pattern matching with the existing shape and size all as directed by Engineer-in-Charge.

Material and labour for scratching existing polish filling the cracks making the surface smooth, material and labour for polishing the table centre with glass top with spirit polish complete as directed by the Engineer-in-Charge.

Corner Table with Glass Top (TP) Taking out unserviceable glass top from corner table, supply and fix new glass top made of 8mm thick tinted glass duly pencil polished edge as per trade pattern matching with the existing shape and size all as directed by Engineer-in-Charge.

Material and labour for scratching existing polish filling the cracks making the surface smooth, material and labour for polishing the Corner Table with glass top with spirit polish complete all as directed by Engineer-in-Charge.

Table Dinining 4 Person (FD-273) Taking out unserviceable top from table dinining 4 Person, supply and fix new top made of pre laminated partical board one side teak face exterior grade 18mm thick duly covered with 4mm thick teak wood beading all around the top all as specified and shown in drg.

Taking out unserviceable leg from table dinining 4 Person, supply and fix new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable front / back / side rail from table dinining 4 Person, supply and fix new front / back rail made of seasoned teak wood matching with existing shape and size complete all as specified and as directed.

Material and labour for scratching existing polish filling the cracks making the surface smooth, polishing the table dinining 4 Person with spirit polish as directed by Engineer-in-Charge

Table Dining 6 pers (FD-269 & 273) Taking out unserviceable top from table dining 6 pers, supply and fix new top made of prelaminated partical board one side teak face exterior grade 18mm thick duly covered with 4mm thick teak wood beading all around the top complete all as specified and shown in drg.

Taking out unserviceable leg from table dining 6 pers, supply and fix new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape and size complete all as specified and shown in drg.

taking out unserviceable front/back rail from table dining 6 pers, supply and fix new front/back rail made of seasoned teak wood matching with existing shape and size complete all as specified and shown in drg.

Taking out unserviceable side rail from table dining 6 pers, supply and fix new side rail made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Material and labour for scratching existing polish filling the cracks making the surface smooth polishing the table dining 6 pers and spirit mixture as per trade pattern complete all as specified and as directed.

Table dressing ladies with Mirror (FD-/MAP-II/07, 378) Taking out unserviceable drawer from table dressing ladies, supply and fix new drawer made of 18/20mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood BWR Grade ISI Marked & Front of drawer shall be made of 18mm thick pre-laminated particle board one side teak face exterior grade complete all as specified and shown in drg.

Taking out unserviceable top from table dressing ladies, supply and fix new top made of 18mm thick pre-laminated particle board one side teak face exterior grade duly covered with 4mm thick teak wood beading all around the to complete all as specified and shown in drg.

Taking out unserviceable bottom from table dressing ladies , supply and fix new bottom made out of 18mm thick pre-laminated partical board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top complete all as specified and shown in drg.

Taking out unserviceable side from table dressing ladies, supply and fix new side made of 18mm thick pre-laminated particle board one side teak face exterior grade duly covered with 4mm thick teak wood beading all around the side matching the existing Shape and size complete all as specified and shown in the drg.

Taking out unserviceable looking mirror from Table dressing ladies, supply and fix new looking mirror of size 5.5mm thick of existing size free from distortion and other defect duly framed with backing plywood teak wood beading and vertical support etc. all as shown in drg.

Taking out unserviceable handle from the drawers /shutters of dressing table ladies, supply and fix of new handle to the drawers and shutters complete all as approved by Engineer-in-Charge.

Material and labour for scratching existing polish filling the cracks making the surface smooth polishing the table dressing Ladies and spirit mixture as per trade pattern.

Table dressing gents with mirror (FD-379 & FD/E6/MAP/16) Taking out unserviceable drawer from table dressing gents , supply and fix new drawers made of 12mm thick teak wood except bottom of drawer which shall be of 6mm thick ply wood commercial exterior grade & front of drawer shall be made of 18mm thick pre-laminated particle board one side teak face exterior grade including knob etc. all as shown in drg.

Taking out unserviceable top from table dressing gents, supply and fix only new top made of 18mm thick pre-laminated particle board one side teak face exterior grade with 4mm thick teak wood beading all around the top complete alll as specified and shown in drg.

Taking out unserviceable bottom from table dressing gents, supply and fix new bottom made of 12mm thick pre-laminated partical board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top all as shown in drg.

Taking out unserviceable side from table dressing gents, supply and fix new side made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top matching the existing shape and size complete all as specified and as directed.

Taking out unserviceable looking mirror from table dressing gents, supply and fix new looking mirror 5.5mm thick of existing size free from distortion and other defect duly framed with backing plywood teak wood beading and vertical support etc. all as shown in drg.

Material and labour for scratching existing polish filling the cracks making the surface smooth polishing the table dressing gents with spirit polish complete as directed by Engineer-in-Charge.

Bed Hard with Ply Top (FD 246) Taking out unserviceable long rail from Bed Hard with Ply Top, supply and fix of new long rail made out of seasoned Hard wood of size 1980mmx90mmx35mm complete all as specified and shown in drg

Taking out unserviceable plywood including replacement of unserviceable battens if any required to change of head side board from Bed Hard with plywood top, supply and fix of new plywood and new battens to Head side board, Plywood shall be 4mm thick one side teak face and plywood duly covered with 4 mm thick teak wood beedings all around complete all as specified and shown in drg.

Taking out unserviceable plywood including replacement of unserviceable battens if any required to change of foot side board from Bed Hard with plywood top, supply and fix of new plywood and new battens to foot side board, Plywood shall be of 4mm thick one side teak face and plywood duly covered with 4 mm thick teak wood beedings all around complete all as specified and shown in drg.

Taking out unserviceable 40x60mm Stiffners from Bed Hard with ply top, supply and fix of new stiffners made out of seasoned hard wood of size complete all as specified and shown in drg

Taking out unserviceable Supporting clamps from Bed Hard with ply Top, supply and fix of new MS clamps made out of 6mmx15mm thick MS flat iron complete all as specified and shown in drg

Taking out unserviceable ply wood from the Bed Hard with ply top, supply and fix of new Plywood commercial 12mm thick top ISI Marked complete all as specified and shown in drg.

Scratching existing polish, filling the cracks and making the surface smoooth, material and labour for polishing the Bed Hard with ply top with spirit polish all the wooden parts exposed to vision to glossy finish complete all as directed by Engineer-in-Charge.

Hat Stand with Mirror (FD-361,362) Taking out unserviceable looking mirror from hat stand with mirror, supply and fix new looking mirror 5.5mm thick of size 300x440mm, free from distortion and other defect matching with existing shape and size all as shown in drg.

Taking out unserviceable pegs hooks from hat stand with mirror, supply and fix new copper oxidesd steel peg hooks matching with the existing shape and size all as shown in drg.

Material and labour for scratching existing polish filling the cracks making the surface smooth, material and labour for polishing the hat stand with mirror with spirit polish as directed by Engineer-in-Charge.

Almirah Med wooden Material and labour for scratching existing polish filling the cracks making the surface smooth and Material and labour for polishing the Almirah Med Wooden with spirit polish complete and removing old unserviceable parts/ components from Almirah Large wooden, Supply and fix new part / components of same existing shape and size complete all as specified and shown in drg and directed by the Engineer-in-Charge.

(a) Door panel left and right made out of 25 mm thick particle board one side teak veneered with 6mm thick teak wood beading. from Almirah Med Wooden.

(b) Shelf made out 18 mm thick particle board one side teak veneered and other side commercial with 6 mm thick teak wood beading.

(c) Hasp & Staple 100mm long

(d) Hanging rod 25mm dia MS CP with brackets

(e) Back ply 6mm thick commercial ply from Almirah Med Wooden

(f) Aluminium Handle D Type 100 mm long

Chair Easy (FD-229) Taking out unserviceable rear leg from chair easy, supply and fix new rear leg made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front leg from chair easy, supply and fix new front leg made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable back rail upper side from chair easy, supply and fix new back rail upper side made of seasoned teak wood. All as shown in drg.

Taking out unserviceable back rail lower side from chair easy, supply and fix new back rail upper side made of seasoned teak wood. All as shown in drg.

Taking out unserviceable side rail from chair easy, supply and fix new side rail made of seasoned teak wood .all as shown in drg.

Taking out unserviceable hand rest from chair easy, supply and fix new hand rest made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Material and labour for scratching existing polish filling the cracks making the surface smooth, polishing the chair easy complete with spirit polish as directed by Engineer-in-Charge.

Chair Dining (FD-228, 279 & FD/MAP-II/05) Taking out unserviceable rear leg from chair dining, supply and fix new rear leg made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front leg from chair dining, supply and fix new front leg made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable front/back/side rail from chair dining, supply and fix new front/back/side rael matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable Stiffenerrs from chair dining, supply and fix new stiffners made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Material and labour for scratching existing polish filling the cracks making the surface smooth, polishing the chair dining complete with spirit polish as directed by Engineer-in-Charge.

Taking out unserviceable PVC seat from dining, supply and fix New PVC seat of 4 mm thick matching with the existing shape and size complete all as specified and as directed.

Chair Writing (FD-280) Taking out unserviceable rear leg from chair writing, supply and fix new rear leg made of seasoned teak wood matching with the existing shape and size complete all as specified and shown in drg.

Taking out unserviceable front leg from chair writing, supply and fix new front leg made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable front/back/side rail from chair writing, supply and fix new front/back/side rail matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable stiffeners from chair writing, supply and fix new stiffeners made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Taking out unserviceable hand rest from chair writing, supply and fix new hand rest made of seasoned teak wood matching with the existing shape and size complete all as specified and as directed.

Material and labour for scratching existing polish filling the cracks making the surface smooth and polishing the chair writing complete with spirit polish as directed by Engineer-in-Charge.

Taking out unserviceable cane from chairs or any other article of furniture then cleaning the holes for re canning and supply & re-canning with new half round cane 2 to 2.5mm wide superior quality ISI Marked color as approved by GE/Engineer-in-Charge vewing shall be as per godrej pattern complete all as specified and directed by Engineer-in-Charge.

Taking out unserviceable cane from chair varandah and de-rusting rubbing old steel surface with sand paper and painting the steel frame with synthetic enamel white paint, supply and re-canning with new cane 4mm wide as per godrej pattern including replacement of rubber shoe at the bottom of leg all as specified and directed by the Engineer-in-Charge.

Chair Conference cushioned wooden (peacock) TP Taking out unserviceable tapestry cloth from seat and back of chair conference cushioned wooden , supply and fix new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc.all as directed by GE/Engineer-in-Charge.

Taking out unserviceable front/back rail from chair conference cushioned wooden, supply and fix new front/back rail made of seasoned teak wood matching with the existing shape and size as directed by GE/Engineer-in-Charge.

Taking out unserviceable Side rail from chair conference cushioned wooden, supply and fix new side rail made of seasoned teak wood. Matching with the existing shape and size as directed by GE/Engineer-in-Charge.

Material and labour for scratching existing polish filling the cracks making the surface smooth, polishing the chair conference cushioned wooden complete with spirit polish as per trade pattern.

TV Trolley FD/E6/Map/04(R) Taking out unserviceable Top From TV Trolley, supply and fix new top made out of 18mm thick Pre laminated Particle board exterior Grade duly covered with 4mm thick TW beading matching with existing shape and size complete all as specified and as directed.

Taking out unserviceable revolving wheel from TV trolley, supply and fix new heavy duty nylon revolving wheel matching with the existing shape and size as specified and as directed by Engineer-in-Charge.

Taking out unserviceable magnetic catcher from TV for Trolley, supply and fix new magnetic catcher with stainless steel matching with the existing shape and size complete all as specified and as directed.

Material and labour for scratching existing polish filling the cracks making the surface smooth, polishing the Almirah Large Wooden with spirit polish complete and removing old unserviceable parts/ components from Almirah Large wooden , supply and fix new part/ components of same existing shape and size complete all as specified and shown in drg and directed by the Engineer-in-Charge.

Sofa set five seater (FD-281/FD-373) Taking out unserviceable foam cushion seat and back from sofa set five seater, supply new foam cushion seat and back 40 density size 21"x22"x4" thick (10 Nos) duly covered with tapestry cloth as approved by GE complete all as specified and shown in drg.

Taking out unserviceable front rail from sofa three seater, supply and fix new front rail made out of first class teak wood matching with the existing shape and size all as directed by GE/Engineer-in-Charge.

Taking out unserviceable back rail from sofa set three seater, supply and fix new back rail made out of first class teak wood matching with existing shape and size all as directed by Engineer-in-Charge.

Taking out unserviceable leg from sofa single chair & three seater, supply and fix new leg made out of first class teak wood matching with existing shape and size all as directed by Engineer-in-Charge.

Taking out unserviceable wooden battens from sofa single chair / three seater, supply and fix new wooden battens made out of first class teak wood matching with existing shape and size as directed by Engineer-in-Charge.

Taking out unserviceable wooden arms from sofa set single chair/three seater, supply and fix new wooden arms made out of first class teak wood matching with existing shape and size as directed by Engineer-in-Charge.

Material and labour for scratching existing polish, filling the cracks making the surface smooth, polishing the Sofa five seater set complete with spirit polish to give glossy finish as directed by Engineer-in-Charge.

Sofa set Three seater (TP) Material and labour for removing old unserviceable letherite / fabric tapestry from the sofa set three seater, supply and fix new leathrite / fabric tapestry as per shade approved by GE / Engr-in-charge including replacement of unserviceable foam cushion of any size and shape, 3 Nos each seat and three Nos each set for back without changing of existing shape and size as directed by GE/Engineer-in-Charge.

Sofa two seater (TP) Material and labour for removing old unserviceable letherite/fabric tapestry from the sofa two seater, supply and fixing new leathrite / fabric tapestry as per shade approved by GE / Engr-in-charge including replacement of unserviceable foam cushion of any size and shape two Nos each set for seat and two Nos each set for back without changing of existing shape and size as directed by GE/Engineer-in-Charge.

Sofa single seater (TP) Material and labour for removing old unserviceable letherite / fabric tapestry from the sofa single seater, supply and fixing new leathrite / fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of unserviceable foam cushion of any size and shape one Nos each for seat and one Nos each for back without changing of existing shape and size as directed by GE/Engineer-in-Charge.

Credenza (TP) Taking out unserviceable top from credenza, supply and fix new top of existing size made out of pre laminated MDF board exterior grade 25mm thick as per existing shade and duly provided with PVC edge binding all around the top all as directed by Engineer-in-Charge.

Taking out unserviceable locks from the drawers of credenza make Godrej/Fetherlite or any other make any shape and any size , supply and fix new lock as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable channel from the drawers of credenza make Godrej / Fetherlite or any other make any shape and any size, supply and fix new channel as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable handle from the drawers of credenza, supply and fix of new handle to the drawers complete all as approved by Engineer-in-Charge.

Back side unit (TP) Taking out unserviceable top from Back side unit, supply and fix new top of existing size made out of pre laminated MDF board exterior grade 25mm thick as per existing shade and duly provided with PVC edge binding all around the top all as directed by Engineer-in-Charge.

Taking out unserviceable locks from the drawers of Back side unit make Godrej / Fetherlite or any other make any shape and any size, supply and fix new lock as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable channel from the drawers of Back side unit make Godrej / Fetherlite or any other make any shape and any size, supply and fix new channel as per trade pattern matching with existing shape and size approved quality all as directed by Engineer-in-Charge.

Taking out unserviceable handle from the drawers of Back side unit, supply and fix of new handle to the drawers complete all as approved by Engineer-in-Charge.

Key Box with glass door (TP) Taking out unserviceable peg hook from key box with glass door, supply and fix new peg hook with the existing shape and size complete all as specified and as directed.

Taking out unserviceable glass door from key box with glass door, supply and fix new glass door made out of 5.5mm thick as per trade pattern matching with the existing shape and size all as directed by Engineer-in-Charge.

REENA INDUSTRIES (BID ID -3334652)

OM ENTERPRISES (BID ID -3350087)