OT-89

Amount

Clearing the scrub jungle and disposing the debris to suitable place away from the site as directed by the engineer at site including all labour charges, hire charges for vehicle, tools and plants required, etc., complete.

Earth work excavation and depositing on bank for laying floor concrete with initial lead of 10m & initial lift of 2m in all types of soil as directed by the Engineer at site including labour charges, leads, lifts,T&P etc., complete.

Providing PCC 1:4:8 using 40mm HBG metal for flooring as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads & lifts, etc., complete.

Providing RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site including cost of all materials, labour charges, shuttering, curing lead, lift, etc., complete. but excluding cost of reinforcement.

Supplying, fabricating and placing in position of steel reinforcement for RCC works as directed by the Engineer at site including cost of steel, binding wire, labour charges for cutting, bending, binding, lead & lift, etc., complete.

Plastering in C.M 1:5, 12 mm thick for wall surfaces including cost of all materials, labour charges, curing, T&P, lead, lift, etc., complete.

Pressure grouting to the RCC roof slab for arresting leakage/dampness etc., as directed by the Engineer at site, including providing holes in the roof slab, fixing nipple using Rendroc plug or equivalent materials and pressure grouting of cement slurry mixed with admixtures of cebex 100 or its equivalent cost of all materials, labour charges, scaffolding, lead & lift, etc., complete.

Providing Stone pitching of 230mm thick with pointing in CM 1:4 including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Dismantling the existing rolling shutter, Modifying and converting the existing motor arrangements into mechanically gear operated system for enabling easy operation of the shutters including supply and providing of required materials and spares such as tension spring, suitable capacity gear box of MS plate of 8mm thick with 40mm MS pipe, bearing pullies, 4 Nos, 32mm x 6mm MS flat for gear box shutter, Gear box wheel pinion and connecting pipe 25mm dia, all bolts and nuts including cost of all materials, all labour charges for cutting, welding, machining charges, cleaning tinkering, scaffolding, erection to alignment refitting the outer cover in position, greasing the home wheel, shutter guide way portion, bottom and top gears and painting the inner and outer surface of the Housing drum arrangement with two coats of enamel paint of approved colour and make transporting charges, lead, lift, etc., complete.

ADITHYA CONSTRUCTIONS

SURIYA ENGINEERING CONTRACTORS

ARP Engineering Contractor