Construction of Trauma Care Centre At. Primary Health Care Centre, At. Anala, Tq. Paranda, Dist. Dharashiv.

Amount

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etcetera, complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material all leads and lifts beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre) By Mechanical Means.

Excavation for foundation in hard murum including removing the excavated material all leads and lifts beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre) By Mechanical Means.

Excavation for foundation in Hard murum and boulders including removing the excavated material all leads and lifts, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift Up To 1.5 metre) By Mechanical Means.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material all leads and lifts beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etcetera complete. (Lift from 1.5metre To 3.0 metre) By Mechanical Means.

Conveying materials obtained from road cutting including all lifts, 3Kilometre away from the site of excavation to the site of deposition as directed. Lead Of 3 Kilometre.

Providing preconstructional antitermite treatment as per Indian Standard 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for Reinforce Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforce Cement Concrete columns and steel stanchions etcetera including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for Reinforce Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforce Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for Reinforce Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforce Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforce Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for Reinforce Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters for Reinforce Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etcetera Complete.

Filling in plinth and floors with approved excavated material in 15centimetre to 20centimetre layers including watering and compacting etcetera complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15centimetre to 20centimetre including watering and compaction etcetera complete.

Providing preconstructional antitermite treatment as per Indian Standard 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand/grit, ramming, watering etcetera complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc).

Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera Complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre X 1.6 milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade finely washed etcetera).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300milimetre x 40milimetre x 5milimetre with oil painting, etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing mild steel grill work for windows, ventilators etcetera 15 kilograme Square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Brunt Brick masonry and or tying by binding wire etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Brunt Brick masonry and or tying by binding wire etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing internal cement plaster 12milimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilograme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface, scaffolding etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing patti/ band 100mm wide on plastered surface 12 milimetre to 15 milimetre thick in Cement Mortar 1:3 line and level including neat finishing scaffolding curing etcetera complete.

First Floor

Second Floor

Third Floor

Providing internal cement plaster 20milimetre thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete.

Ground Floor

Providing fine cement finish 1.5milimetre thick over green plaster surface including scaffolding curing etcetera complete.

Ground Floor

Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at 1kilograme per bag of cement laying brick bat coba of required thickness in centimetre 1:5 with waterproofing compound 1 kilograme per bag of cement grouting and finishing the top layer with 20milimetre thick brick bedding in centimetre mortor 1:3 with waterproofing compound 1 kilograme per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying vitrified matt fininsh tiles having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying vitrified matt finish tiles having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying in position flooring of telephone black granite stone of approved shade and size 18 milimetre to 20 milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying telephone black granite stone of 18 to 20 milimetre thick for door frame / dado / window boxing etcetera On Cement Mortar 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing 25 milimetre to 30 milimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera Fixing in cement mortar 1:3 curing and cement etcetera complete. a) One side polish.

First Floor

Second Floor

Third Floor

Providing 25 milimetre to 30 milimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera Fixing in cement mortar 1:3 curing and cement etcetera complete. b) Both side polish

First Floor

Second Floor

Third Floor

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 milimetre thickness of having a strength of 400 Kilogram per Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etcetera complete. (using 100% crushed sand)

Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 20 milimetre thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer.

Providing and fixing 50 milimetre x 50 milimetre Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars 12 milimetre at 10 centimetre center to center without hot dip zinc coating without / with ventilator including fabrication, glazing with plain / obscured glass panes 5 milimetre thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete.

First Floor

Second Floor

Third Floor

Providing and fixing 34 milimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 milimetre thickness lipped with 15 milimetre ( 5milimetre x 3) thick x 30 milimetre width on one style and top rail and 10 milimetre (5milimetre x 2) thick x 30 milimetre width on other style and bottom rails. The inner panels laminated with 2 milimetre thick termite proof, water proof and fire resistant moulded Poly Vinyl Chloride sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam Poly Vinyl Chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Poly Vinyl Chloride lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and Fixing 30 Milimetre thick ''FACTORY MADE BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER manufactured by M/S RAJSHRI equivalent consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 milimetre for styles and 15 x15 milimetre for the top and bottom rails, Mild Steel frame shall have a coat of metel primer of approved make and manufacture. Mild Steel frame shall be covered with heat mouled PVC 'C' channel made from 5 milimetre (+/0.25) thick prelaminated sheet of density 600 kilograme per cubic metre, of size 30milimetre thickness 70milimetre width out of which 50milimetre shall be flat and 20milimetre shall be tapered in 45? angle on either side forming stiles; and 5 milimetre thick, 95 milimetre wide PVC sheet out of which 75 milimetre shall be falt and 20 milimetre shall be tapered in 45? on the inner side to form top and bottom rail and 115 milimetre wide PVC sheet out of which 75 milimetre shall be falt and 20 milimetre shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. An additional 5 milimetre (+/0.25) thick PVC strip of 20 milimetre width is to be stuck on the bottom side of the 'c' channel prelaminated paneling of 5milimetre (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 (+/0.25) x 30 PVC sheet beading on either side and joined together with solvent cement adhesive etcetera,10 thickness (5milimetre (+/0.25) x 2 numbers) 20 milimetre wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 milimetre x 25milimetre x 2milimetre using 32 milimetre long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 milimetre size steel screws including fixture fasting. Complete as per direction of engineer in charge

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing shutter to wall cupboard made from 19 milimetre thick Teak particle board with approved coloured laminated face 1.5 milimetre thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etcetera complete. (Excluding cupboard frame).

First Floor

Second Floor

Third Floor

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75milimetre, 3.18milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre x 3.00 milimetre thick top rails 47.62 x 44.45 milimetre x 3.00 milimetre thick, vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12milimetre thick both side laminated phenol bonded particle board panels for bottom panels etcetera, I.S.I. mark , heavy duty, Hydraulic floor spring of 150 Kilogram capacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250milimetre length aluminium tower bolts, 150milimetre diameetre. pad handle, etcetera as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etcetera complete.

Ground Floor

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 Kilogram per One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 Kilogram per One Running Metre. Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 Kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 Kilogram per One Running Metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 Kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight 0.417 Kilogram per Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera, complete. With colour Anodising with box.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilograme Running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilograme Running metre. Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilograme Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilograme Running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilograne Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilograme Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera, complete. With powder coating without box.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 milimetre minimum size, crossings of Mild Steel flats of size 18 x 5 milimetre T or E section for runner of minimum 40 x 6 milimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12 milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 milimetre max. spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etcetera complete. (Indian Standard 105211983). complete.

Providing & fixing of Casement fixed window of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from approved raw material V2 / V4 as directed by Engineer in charge.

Ground Floor

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 milimetre diametre and vertical pipe of 38 milimetre diametre at 0.60 metre centre to centre or as required and horizontal pipes of 25 milimetre diametre in three rows, all pipes of 2 milimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre dia above newel post of 75 milimetre diameter etcetera complete (Prior approval of sample and brand by Executive Engineer is necessary before use)

Ground Floor

First Floor

Second Floor

Third Floor

Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of Superintending Engineer).

Ground Floor

First Floor

Second Floor

Third Floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etcetera) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram per 15 letre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Ground Floor

First Floor

Second Floor

Third Floor

Providing soak pit of size 120centimetre x 120centimetre x 120centimetre including excavating and filling with brick-bats.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etcetera complete.

Ground Floor

First Floor

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 milimetre thick of 900 milimetre (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12milimetre thick panels shall be used for a roofing height of upto 15 mtres.

Providing and fixing on walls/ ceiling/ floor 15 milimetre diametre CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing on walls/ ceiling/ floor 25 milimetre diametre CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing on walls /ceiling/ floor 40 milimetre diametre. CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.

Providing and laying in trenches 50 milimetre diametre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing screw down for 40milimetre diametre Wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 25milimetre diametre Wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing Orissa Pan of size 580x445x260 milimetre with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etcetera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing white european type wall-hung, of size 360milimetre x 360milimetre x 575milimetre with flush valve having flow rate upto 6.0 Litre per Minute of Jaquar/Cera/Hindware/Perryware or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100milimetre diametre PVC plug bend inlet pipe all fittings, cutting & making good walls, floors etcetera as directed by Engineer in charge. (Make shall be conform to manufacurer’s Greed product and shall got approved from the Engineer in charge.)

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing wall-hung white wash basin of size 470x575x190milimetre of approved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental including S.S. bottle trap of having necessary pipe connections up to the outside face of the wall. etceteera complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Liter per Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etcetera complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete.

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete.

Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing sink cock with regular swinging spout (Wall/floor Mounted Model) with wall flange having flow rate upto 6.0 litre per Minute of Jaquar/Cera/ Hindware/ Perryware or equivalent make including other necessary fitting etcetera completed as directed by Engineer in Charge. (Make shll conform to manufacturer’s Green product and shall got approved from the Engineer in Charge.)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite etcetera complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre).

First Floor

Second Floor

Third Floor

Providing and Fixing half turn 25 milimetre diametre gun metal flushing cock including all accessories etcetera complete.

Providing and fixing 450milimetre x 550milimetre size superior type Belgium mirror with 16milimetre diametre nickel plated towel rod etcetera complete.

Providing and constructing Brick Masonry Inspection Chamber 60centimetre x 45centimetre x 90centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforce Cement Concrete Cover medium duty 140 kilograme with frame etcetera complete.

Providing and constructing Brick Masonry Inspection Chamber 90centimetre x 45centimetre x 90centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforce Cement Concrete Cover medium duty 140 kilograme with frame etcetera complete.

Providing and fixing 100 milimetre diametre stabiliser pipe/ Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete.

Providing and fixing High Dipressed Polymer container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing 10 centimetre Poly Vinyl Chloride nahani trap with grating etcetera complete.

Providing and fixing in position UPVC ultra violet stabilized 110 milimetre outer diameter cowl dome confirming to Indian Standard-4985 including making joints with solvent cement etcetera Complete.

Providing and fixing 15 milimetre thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595milimetre x 595milimetre in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 grame per square metre including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38milimetre made from 0.33 milimetre thick(minimum) sheet, spaced 1200milimetre center to center and cross T of size 24X28milimetre made of 0.33milimetre thick(minimum) sheet to be interlocked at the middle of the 1200x600 milimetre panel to form the grid of size 600x600milimetre resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 milimetre thick (minimum) sheet with the help of all plugs at 450milimetre and laying15 milimetre thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings, fixtures, smoke detectors etcetera, wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 milimetre fixed to ceiling using 12.5milimetre diametre. And 50milimetre long dash fasteners, 4milimetre G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8milimetre, spaced at 1200milimetre center to center along main T bottom exposed with 24milimetre ofall T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etcetera complete. (currently this item should be used only for VIP cabins)

Ground Floor

First Floor

Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 milimetre x 40 milimetre weighing 0.39 Kilogram per metre at 60 centimetres centre to centre and fixed with (15 x 15 milimetre) flanges weighing 0.119 Kilogram per metre suspended on 6 milimetre diametre mild steel rod weighing 0.22 Kilogram per metre fixed on wall and beams including rounding of the edges with aluminium T of 50 milimetre x 40 milimetre weighing 0.39 Kilogram per metre etcetera including all labour etcetera complete.

Ground Floor

First Floor

Providing and fixing false ceiling of 10 to 12 milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etcetera complete. (excluding frame work, runners and mild steel suspenders).

Ground Floor

First Floor

Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ 1200Lx450Dx650HT Providing & Fixing of Table @ 2250Lx2100Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between) as per drawing.

Ground Floor

First Floor

Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 milimetre thick Prelaminated particle board with PVC edge band as per drawing.

Ground Floor

First Floor

Pedestal Unit @ 420Lx450Dx650HT Providing & Fixing of PEDESTAL @ 420Lx450Dx650HT :- To be made out of Complete Membrane consist of three Drawers as per drawing.

Ground Floor

First Floor

Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish (2 Openable Shutter & 3 Drawer Pedestal in between) as per drawing.

Ground Floor

First Floor

Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 milimetre. Top: made from 25 milimetre Prelaminated Particle board. All edges are covered by 2 milimetre Thick PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18milimetre both side prelaminated particle boards.All edges are covered by 0.8milimetre PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEYBOARD TRAY (WITHOUT MOUSE TRAY) :- Metal Powder Coated - Black Color, CPU TROLLEY:- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. milimetre with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 milimetre prelaminated particle board,

Ground Floor

First Floor

Free Standing Table @ 1200Lx600Dx750HT Providing and fixing Table of Size 1200 x 600 x 750 milimetre Top: made from 25 milimetre Prelaminated Particle board. All edges are covered by 2 milimetre Thick PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18milimetre both side prelaminated particle boards.All edges are covered by 0.8milimetre PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEYBOARD TRAY (WITHOUT MOUSE TRAY) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. milimetre with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 milimetre prelaminated particle board.

Ground Floor

First Floor

Conference Table @ 3600Lx1400Dx750HT Providing & Fixing of Main Table @ 3600Lx1400Dx750HT - made up of 18+18milimetre Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4milimetre thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring, MODESTY PANEL:- to be made of 18 milimetre thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Numbers.

Ground Floor

Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Height, with 2 adjustable shelves, Complete body & shutter made in 0.8 milimetre thick & Top in 2 milimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 milimetre thick additional Top on top of storage as as per drawing.

Ground Floor

First Floor

Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Steel Storage of 750 x 450 x 1200Height, with 2 adjustable shelves, Complete body & shutter made in 0.8 milimetre thick & Top in 2 milimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 milimetre thick as per drawing.

Ground Floor

First Floor

Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Height, with 4 adjustable shelves, Complete body & shutter made in 0.8 milimetre thick & Top in 2 milimetre thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.

Ground Floor

First Floor

Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery

Ground Floor

First Floor

Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT.

Ground Floor

First Floor

Providing & Arrangemnt of MId Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery.

Ground Floor

First Floor

Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery

Ground Floor

First Floor

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

Ground Floor

First Floor

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (centimetres) Breadth (centimetres): 100 (centimetres)Height (centimetres): 100 (centimetres) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat.

Ground Floor

First Floor

Tea Table 900milimetre X 750milimetre X 450milimetre for m.s. ante chamber - Providing And Fixing Of Tea Table 900milimetre X 750milimetre X 450milimetre With 12milimetre Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18milimetre Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica etcetera

Ground Floor

First Floor

Stool for Lab and Class-IV : Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 milimetre Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge.

Ground Floor

First Floor

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforce Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforce Cement Concrete columns and steel stanchions etcetera including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade finely washed etcetera).

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforce Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully Automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade finely washed etcetera).

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforce Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compactionand roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera).

Providing internal cement plaster 20milimetre thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete.

Providing, aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 milimetre thick ACP sheet material consisting of 3milimetre thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 milimetre thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent,backer rods etcetera overall weight of the ACP shall not be less than 7.5 Kilogram per One Square Metre)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete.

Providing and fixing bituminous pad 25milimetre thick for expansion joints in retaining wall, compound wall etcetera complete.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete.

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etcetera complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) milimetre Aggregate).

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to Indian Standard : 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kilograme per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete with fully automatic micro procesor based PLC with SCADA enable reversible Drum Type Micro/ Concrete Batch Mix Plant/ Pan Mixer) etcetera completed.

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 milimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 milimetre wide and 20 milimetre deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate (natural sand/washed crushed sand) etcetera complete.

Providing and fixing colour coated Zincalume (R) AZ150 ( min 150 grams per square metre total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre Base Metal Thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etcetera complete. (weight of profile 4.52 Kilogram per One Square Metre)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 milimetre thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etcetera as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 milimetre thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etcetera complete.

Preparing Instant Lawn :- Excavating the ground to a required depth of 20centimetres. Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil / silt & manure in 3:1 proportion to a height of 20centimetres. Mixing soil and Manure thoroughly well, leveling with required slope, light watering on previous night, rolling on surface, fixing readymade lawn turf, rolls or slabs of required variety as directed. Ramming on it for proper fixing & maintaining till well established by watering, wedding, clipping or mowing etcetera complete.

Rose Plant :- Excavating pit with size 0.30 x 0.30 x 0.30 metre Removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 30centimetres. Mixing garden soil and manure, throughtly well, levelling, watering on previous night, planting 40 to 50 centimetres height healthy plants of required Rose variety maintaining till well established by watering weeding, stirring, prunning, replacing the casualties etcetera complete.

Planting Large Flowering / Shady Trees :- ( Minimum Height to 1 Metre) Digging pit with size 0.9metre x 0.9metre x 0.9metre Removing & conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30metre and remaining height of 0.60metre with fresh garden soil & manure in 3:1 proportion. Mixing soil and manure thoroughly well, levelling as directed, watering previous night. Planting one or two years old, minimum 1.0 metre height, healthy tree sapling as per specifications. Maintaining till well established by watering, weedings, stirring of soil, staking replacing, casualaties etcetera complete.

Planting small and medium size ornamental / flowering plant :- Digging pit with size 0.6metre x 0.6metre x 0.6metre Removing & conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & Farm Uard Manure up to a height of 0.60metre in in 3:1 proportion. Mixing soil and manure thoroughly well, levelling as directed, watering previous night. Planting one or two years old healthy plants sapling as per specifications. Maintaining till well established by watering, stirring of soil and manure, replacing of casualties etcetera complete.

Planting clipped Hedge :- Excavating the ground to a required depth of 30 centimetres. Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil / silt & manure in 3:1 proportion to a height of 20centimetres. Mixing garden soil and Manure thoroughly well, leveling with required slope, light watering on previous night. Planting hedge plants of required species in two rows. Distance between two rows & between two plants will be 25centimetres. Maintaining till well established by watering, wedding, clipping if necessary etcetera complete.

Providing and laying in walls/ceilings/floors 50 milimetre diametre medium grade having embossed as ISI Mark galvanised iron pipes of 5.17 Kilogram per metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in walls/ ceilings/floors 40 milimetre diametre medium grade having embossed as ISI Mark galvanised iron pipes of 3.68 kilograme per metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing Poly Vinyl Chloride Rain water pipes of 110milimetre outer diameter and having wall thickness of 2.2 to 2.7 milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Vinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetre to 40milimetre from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Vinyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete.

RWH - Recharge Pit : Providing and constructing recharge pit of 2.0metre deep and 1.0metre diametre of pre-cast RCC rings with 6.5" diametre x 25metre deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300milimetre thick sidefilling around outside of RCC rings (annular space) with 40milimetre size boulders including filling of recharge pit up to 0.5metre depth with 25-75milimetre clean washed gravels from bottom up followed by 0.5metre depth of 10-25milimetre of clean washed stones followed by 0.5metre of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etcetera) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etcetera) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etcetera including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforce Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etcetera)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for Reinforce Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etcetera).

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilograme with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etcetera complete.

Providing and fixing 20 to 25 milimetre thick rough shahabad box type water proofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike water proofing liquids, raking of joints upto 35 milimetre depth, filling the joints with 6 milimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rupees.100/- with ponding test etcetera complete. (excluding Cement concrete 1:3:6 base concrete).

Drilling surface bore well 150 milimetre diametre in all types starta including tranportation etcetera complete.

Providing and fixing Ultra Poly Vinyl Chloride casing pipe 180milimetre diametre ( 6kilogram per centi metre square) for 150 milimetre diametre bore well etcetera complete.

Yeild testing by V noteches etcetera complete. As directed by Engineer in Charge.

Providing and fixing Poly Vinyl Chloride Cap for 180milimetre casing pipe etcetera complete.

Providing and supplying in standard lengths Polythelene Pipes including all local & central taxes, octri, inspection charges, transportation to stores etcetera complete. (6 Kilograme per Square centimetre - 63milimetre diametre).

Lowering, laying, jointing in standard lengths Polythelene pipes ( 6 Kilograme per Square centimetre - 63milimetre Diametre) including all labour cost, transportation etcetera complete.

Supplying and erecting submersible pumpset of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150 milimetre diametre borewell suitable for 250 to 700 LPM discharge at 44 to 20metre head & (max. efficiency at 32 metre head & 500 lpm) discharge & delivery pipe of Size-65 milimetre diameter with a necessary H type clamps as per specification no. WP-SMP.

Supplying and erecting flat flexible 3 core 4 suare milimetre Poly Vinyl Chloride sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforce Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade finely washed etcetera)

Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etcetera complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etcetera), cement 6.40 bags per cubic metre).

Providing and laying cement concrete pipe of Indian Standard 458:2003 NP-2 class of 450milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete.

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etcetera complete. (By Mechanical Means) a) Upto 1.50metre lift Normal Rate.

Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etcetera complete. a) Upto 1.50metre lift Normal Rate.

Providing & laying in situ cement concrete of M 10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work compacting and curing etcetera complete. with reversible Drum Type mixer with SCADA. With crushed sand.

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA.

Providing and laying cement concrete pipe of Indian Standard 458:2003 NP-2 class of 900milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete.

Providing and filling annular space around footing in rock by using concrete of M15 grade etcetera complete.

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etcetera.

Dismantling brick masonry in lime or cement and stacking the materials as directed with all leads, lifts, complete.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, complete.

Removing ventilators and small windows with frame and stacking the materials as directed with all leads, lifts, complete.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etcetera complete

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etcetera complete

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre) By Mechanical Means.

Dismantling the Reinforce Cement Concrete Work 1:2:4 and sorting out the materials such as steel etcetera as directed and stacking them within the specified lead as directed etcetera complete.

Removing Water Closet pan including disconnecting the sanitary and water supply disconnections, removing and breaking flooring and bed concrete around pan etcetera complete.

Cost of Rubble available from dismetling U.C.R. stone mesonary

Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the lefters/figures with approved colour and shade complete.

Electrical Work : Supplying and erecting HMS PVC conduit FRLS grade 25 milimetre diametre with necessary accessories in wall/floor with chiselling appropriately as per specification.

Supplying and laying HMS PVC conduit FRLS grade 25 milimetre diametre with necessary accessories in RCC work/false ceiling/false flooring as per specification.

Supplying and laying HMS PVC conduit FRLS grade 32milimetre diametre with necessary accessories in RCC work/false ceiling/false flooring as per specification.

Supplying and erecting HMS PVC conduit FRLS grade 32 milimetre diametre with necessary accessories in wall/floor with chiselling appropriately as per specification.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 milimetre with accessories on wall/ceiling as per specification.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 milimetre with accessories on wall/ceiling as per specification.

Supplying and erecting mains with 1x1.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification.

Supplying and erecting mains with 2x1.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification.

Supplying and erecting mains with 1x2.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 2x2.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 2x4 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 1x4 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 2x6 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 4x6 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 1x6 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 4x10 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification.

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 milimetre PVC conduit / casing n capping with 1.5 square milimetre (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 milimetre PVC conduit / casing n capping with 1.5 square milimetre (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 square milimetre (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 square milimetre (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification.

Supplying & erecting 2 pair telephone copper cable 0.5 milimetre diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification.

Supplying & erecting 10 pair telephone copper cable 0.5 milimetre diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification.

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification.

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete

Supplying and installing cat-6 cable suitable for networking as per specification.

Supplying and fixing 1 metre UTP patch cord of Cat 6 type in position as per specification.

Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete.

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification.

Supplying, installing and testing UTP connector (RJ-45) as per specification.

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification.

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 milimetre) as per specification.

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600milimetre X 600milimetre) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.

Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification.

Supplying and erecting street light Wall bracket made from 40 milimetgre diametre ‘G.I. pipe 1.2 metre in total length complete as per specification.

Supplying and erecting air circulator 600 milimetre sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 milimetre 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 milimetre, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification.

Supplying & fixing anchor type fastener fan hook, with 2 numbers of 10 milimetre diametre x 75 milimetre long with necessary materials for ceiling fan.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 square milimetre copper PVC wire.

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification.

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification.

Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 milimetre for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 milimetre thickness and inner diameter / sizes 22 milimetre for solar water heater/AC system.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2milimetre thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2milimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2milimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2milimetre thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Providing & erecting 4 Pole MCCB 415V, 100A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification.

Providing & erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A

Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB.

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etceteraincluding cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etceterafor panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard

Supplying & erecting of required size electrolyte copper bus patti or bar tin plated in bus bar chamber/in panel or any other purpose, suitable for 500 volt with require capacity having thermal conductivity of 400W per meter with composition Pure copper 99.9percent Current density 1.8 with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 square milimetre copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 square milimetre copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing & recording the results as per specification.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required as per specification.

Supplying & erecting four pole ON LOAD change over switch, 415V, 100A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3.

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification.

Supplying & erecting 55" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etceteracomplete as per specifications.

Supplying, installing, testing & commissioning of 32/40 Ch. Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with DMI/VGA outputs, provided HDMI output of 4K resolution or VGA output with output up to 1920 × 1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 0/100/ 1000 Mbps self-adaptive Ethernet interface, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging and programming etceteracomplete as per specification.

Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following featuresImage Sensor : minimum 1/2.8" Progressive Scan CMOS,Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etcetera complete as per specification.

Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant.Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic hiteBalance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all ccessories etcetera complete as per specification.

Part B Fire Fighting : Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etceterafor panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 square milimetre copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 square milimetre copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 milimetre thick) GI sheet of 150 milimetre width & 100 mm height comprising all required standard accessories.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 milimetre thick) GI sheet of 150 milimetre width & 20 mm height complete with necessary hardware.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing & recording the results as per specification.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required as per specification.

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1600 to 1800 LPM at 70 to 55 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 30kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etceteraas required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etceteraas required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification.

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etceteraas required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 m head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etceteraas required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etceteraas required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

Supplying and erecting G.I. pipe ‘C’ class ERW 25 milimetre diametre with necessary fittings complete as per specification.

Supplying and erecting G.I. pipe ‘C’ class ERW 50 milimetre diametre with necessary fittings complete as per specification.

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 milimetre diametre with necessary fittings complete as per specification.

Supplying and erecting G.I. pipe ‘C’ class ERW 100 milimetre diametre with necessary fittings complete as per specification.

Supplying and erecting G.I. pipe ‘C’ class ERW 150 milimetre diametre with necessary fittings complete as per specification.

Providing coating of bitumen paint & 4milimetre thick wrapping for underground 100 milimetre ring main of fire fighting system.

Providing coating of bitumen paint & 4milimetre thick wrapping for underground 150 milimetre ring main of fire fighting system.

Supplying and erecting 100 milimetre diametre cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification.

Supplying and erecting 150 milimetre diametre cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification.

Supplying and erecting 80 milimetre diametre cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification.

Supplying and erecting 100 milimetre diametre cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification.

Supplying and erecting 150 milimetre diametre cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification.

Supplying and erecting 25 milimetre diametre gun metal gate valve complete with PN16 pressure rating, as per specification.

Supplying and erecting 50 milimetre diametre gun metal gate valve complete with PN16 pressure rating, as per specification.

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification.

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification.

Supplying and installing wall mounting swinging hose reel drum fitted with 19 milimetre diametre 30metre long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification.

Supplying and erecting 63 milimetre diametre, reinforced rubber lined (R.R.L.) hose pipe, 15metre in length, fitted with necessary accessories complete as per specification.

Supplying and erecting stainless steel branch pipe 63 milimetre diametre fitted with 20 milimetre diametre detachable hexagonal nozzle complete as per specifications.

Supplying and erecting 150 milimetre diametre fire brigade header suitable for supplying water in fire tank complete as per specification.

Supplying and erecting fire brigade header (Siamese connection) of 150 milimetre diametre, for supplying water in fire tank complete as per specification.

Supplying and erecting 300 milimetre diametre 1.5metre in height air vessel / tank fabricated from min 5milimetre thick M.S. sheet complete as per specification.

Supplying and erecting 20/25 milimetre diametre gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification.

Supplying and erecting 100 milimetre diametre pressure gauge , 0-300 PSI or 0-14 kilograme per cm square fitted with 12/15 milimetre diametre pad cock valve, erected with provided G.I. pipe, elbow etceteracomplete as per specification.

Supplying and erecting 12/15 milimetre diametre pressure switch with provided isolation valve, G.I. nipple, elbow, etcetera complete as per specification.

Supplying and erecting brass orifice plate having 6 milimetre thickness, 140 milimetre outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification.

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 milimetre) made from 16 SWG sheet and angle iron 25 x 25 x 4 milimetre having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etceteraduly painted in post box red colour (Code 538 of IS 5)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 square milimetre copper conductor complete erected on wall/ ceiling complete as per specification.

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification.

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification.

Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 milimetre to 1500 milimetre height and sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 milimetre height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification.

Supplying, erecting, testing and commissioning of 1.0 square milimetre speaker wire complete.

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 milimetre (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification.

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kilograme capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 milimetre M. S. flat with nut & bolts routed in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kilograme capacity with necessary clamp for erection on wall.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Supplying and erecting ISI mark GI pipe 32 milimetre diametre ‘C” class at position with accessories complete. Specification.

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.

Making trench in hard murum/Tar road having 0.9 metre depth and minimum 0.3metre width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification.

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etceteraconforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty.

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty.

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etceterawith 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty.

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed.

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty

Supplying and erecting 200 milimetre diametre cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification.

Part C Transformer, DG,Street light, Pump, Solar System, Lift : Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etceterafor panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etceteraincluding cutting, bending, drilling, welding, riveting etceteraand painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying and laying (including excavation of suitable width & depth up to 90 centimetre) 75 milimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting rolled steel joist (girder) pole 100 x 116 milimetre (23 kilograme per metre) with base plate in provided foundation as per specification.

Supplying & erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100x50x6milimetre 1.6metre long having stud angle of size 50x50x6milimetre 1.5metre long with necessary clamps, nut bolts etceteracomplete as per drawing.

Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification.

Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification.

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20milimetre x1.8metre length and pole clamps duly erected in provided cement concrete foundation complete.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing & recording the results as per specification.

Providing pipe type earthing with 40milimetre diametre G.I. pipe or 20 milimetre diametre G.I. Rod complete with all materials testing and recording the results as per specification.

Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification.

Providing and back filling ground enhancing compound 25 kilograme bag complete.

Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV, 50 Hz., 100 kVA, Mineral oil immersed and naturally cooled outdoor type, aluminium wound Non-sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40℃ by thermometer in oil and 45℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) , with standard accessories complete with test certificate with losses below 475 Watts at 50% load, 1650 Watts at 100% load as per IS:1180 (part 1) : 2014, with necessary permissions of Electrical Inspector, as per specification.

Supplying and erecting fencing of section having size 2450 milimetre in height from ground level and 1200 milimetre width with angle iron frame work erected in CC foundation and painted complete as per specification.

Supplying and erecting 50 x 50 x 6 milimetre angle iron as corner support 2metre long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 centimetre complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Supplying and erecting double leaf hinged door each 1500 milimetre in width x 1850 milimetre in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification.

Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 milimetre. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters per kilograme).

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Making cement concrete foundation including excavation (60 x 60) centimetre x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 milimetre stone metal, 45 centimetre x 45 centimetre x 45 centimetre /45 centimetre diametre x 45 centimetre height plinth duly plastered, with necessary curing and finishing complete. (for above 9 metre poles)

Supplying and erecting rolled steel joist (girder) pole 175 x 85 milimetre (19.6 kilograme per metre) with provided base plate in provided foundation as per specification.

Supplying & erecting MS pole bracket for guarding/LT OH line, fabricated from ISM channel 75x40x6 milimetre and 1100 milimetre long for necessary nos. of provided insulators and erecting on pole with 50x6 milimetre clamp complete as per specification.

Supplying and erecting all aluminium stranded conductors 7/2.21 milimetre complete. (Gnat) (73.77 kilograme per kilometre) as per specification.

Supplying and erecting all aluminium stranded conductors 7/3.10 milimetre complete. (Ant.) (145.0 kilograme per kilometre) as per specification.

Supplying and erecting porcelain shackle type LT medium insulator, 50x89 milimetre diametre with G.l. (shackle) strips, nuts and bolts, complete.

Supplying and erecting aluminium bobbin with G.l. (shackle) strip, nuts complete.

Supplying and erecting fibre/PVC spacers for LT overhead line 3 to 5 conductors complete erected.

DG : Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A

Supplying & erecting four pole ON LOAD change over switch, 415V, 100A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3.

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etceteraincluding cutting, bending, drilling, welding, riveting etceteraand painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per square milimetre with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying and laying (including excavation of suitable width & depth up to 90 centimetre) 50 milimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing & recording the results as per specification.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 62.5 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 11.3 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 metre, provided with first filling of oil, diesel not less than 150 Litre etcetera on provided M20 Grade CC Foundation as per specification.

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 50 kVA up to 62.5 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Street Light and Pump : Supplying and erecting PVC insulated PVC round sheathed 1 square milimetre (32 numbers. x 0.20milimetre diametre) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification.

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying & erecting G.I. pipe ‘A’ class 25 milimetre diametre erected for enclosing XLPE armoured cable on wall/pole as per specification.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting FRP box of size 300milimetre x 200mmmilimetre x 125 milimetre, 2.7 milimetre thick complete on pole/wall as per specification.

Providing & erecting 6 metre high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 milimetre A/F, top 70 milimetre A/F on provided foundation as per specification.

Providing & erecting 8 metre high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 milimetre A/F, top 70 milimetre A/F on provided foundation as per specification.

Providing and erecting galvanised 1000milimetre single arm sword type bracket with FRP dome and ball as per specification.

Providing and erecting galvanised 1000milimetre double arm sword type bracket with FRP dome and ball as per specification.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing & recording the results as per specification.

Providing pipe type earthing with 40milimetre diametre G.I. pipe or 20 milimetre diametre G.I. Rod complete with all materials testing and recording the results as per specification.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T per square metre at 1.5 metre depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6metre to 8metre high octagonal /conical GI pole).

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, fixing and commissioning MCB type change over switch 4 pole, 25A with 3 positions (I-O-II) with centre off position as per specification.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification.

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying and laying (including excavation of suitable width & depth up to 90 centimetre) 75 milimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s. A.C. supply, having delivery head from 27 to 9 metre and discharge from 300 to 660 litres. per minute & pipe of Suction 65mm /Delivery 50 milimetre diameter erected with necessary H type clamps as per specification.

Supplying and erecting minimum Three & above star rated submersible pump set of 1.5 KW/2 HP with 230 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 10 to 95 LPM discharge at 167 to 36 metre head & discharge & delivery pipe of Size-32 milimetre diameter with a necessary H type clamps as per specification.

Supplying & erecting flat flexible 3 core 4 square milimetre PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera.

Supplying & erecting automatic control panel for 1 Ph, 230 volt, A.C. Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection.

Supplying and erecting high density polythene pipe ISI mark 32 milimetre diametre suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.

Supplying and erecting high density polythene pipe ISI mark 50 milimetre diametre suitable for pressure of 6 kilograme per centimetre square connected to jet/submersible pump with required material complete.

Supplying and erecting 50 milimetre diametre gun metal sluice valve at position with necessary materials complete.

Supplying and erecting non return valve 50 milimetre diametre in position made of gun metal complete.

Solar Ongrid System : Supplying, installing, testing and commissioning of 20 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 60 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etceterawiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification.

Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area).

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2milimetre thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2milimetre thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etceterafor panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 1400 to 1600VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as per specification.

Supplying and erecting 12V/150Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete.

Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software

Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0, 3 x 240V, 50 Hz, with backlit LCD display, optical port and RJ 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying and laying (including excavation of suitable width & depth up to 90 centimetre) 50 milimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing earthing with copper earth plate size 30 x 30 x 0.315 centimetre complete with all materials, testing & recording the results as per specification.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required as per specification.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 milimetre diametre copper pipe of standard length with 5 Numbers copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Making trench in soft soil having 0.75 metre depth and minimum 0.3 metre width for laying provided cables up to voltage level of 1.1kV complete as per specification.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) milimetre stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 250 LPD capacity with SS water tank of thickness 0.5 mm, conforming to IS1239 Part-I :2004 complete as per specification.

Supplying and erecting 20/25 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 2.6 milimetre conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification.

Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 milimetre conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification.

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etceterafor panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing pipe type earthing with 40milimetre diametre G.I. pipe or 20 milimetre diametre G.I. Rod complete with all materials testing and recording the results as per specification.

Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 milimetre diametre borewell suitable for 120 to 390 LPM discharge at 55 to 11 metre head & discharge & delivery Pipe of Size-50milimetre diameter with a necessary H type clamps as per specification.

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying & erecting flat flexible 3 core 4 square milimetre PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Supplying and erecting high density polythene pipe ISI mark 32 milimetre diametre suitable for pressure of 6 kilograme per centimetre square connected to jet/submersible pump with required material complete.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) milimetre stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Supplying and erecting 25 milimetre diametre gun metal sluice valve at position with necessary materials complete.

Supplying and erecting non return valve 25 milimetre diametre in position made of gun metal complete.

Lift : SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with · Rated capacity :- 20 Passenger/1360 Kilograme · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 metres · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1100/1200 milimetre wide x 2000 milimetre high · Clear Car size of 1300 milimetre wide x 2400 milimetre deep x 2100milimetre high · Lift shaft available having clear size of 2300milimetre wide x 3000 milimetre deep, 1500milimetre Pit depth, 3500 milimetre Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5milimetre thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) etcetera. For More Details Read BOQ attached in Tender Booklet.

Part D : Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 milimetre with accessories on wall/ceiling as per specification.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification.

Supplying and erecting mains with 2x1.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification.

Supplying and erecting mains with 2x1.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification.

Supplying and erecting mains with 2x2.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification0.

Supplying and erecting mains with 2x2.5 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 2x4 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting mains with 2x4 square milimetre FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 square milimetre (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 square milimetre (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

Supplying and erecting street light Wall bracket made from 25 milimetre diametre ‘ G.I. pipe 1.2 metre in total length complete as per specification.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225milimetre 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 milimetre, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification.

Supplying and erecting fan hook of 10 milimetre M.S. round bar grouted in RCC slab with making the site as original.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etceterain provided distribution board.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2milimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2milimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2milimetre thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting plywood 12 milimetre thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etceteracomplete.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etceterafor panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 milimetre (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V 2 core 4 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 square milimetre aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying & erecting G.I. pipe ‘A’ class 50 milimetre diametre erected for enclosing XLPE armoured cable on wall/pole as per specification.

Supplying and laying (including excavation of suitable width & depth up to 90 centimetre) 50 milimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting FRP box of size 300milimetre x 200milimetre x 125 milimetre, 2.7 milimetre thick complete on pole/wall as per specification.

Providing pipe type earthing with 40milimetre diametre G.I. pipe or 20 milimetre diametre G.I. Rod complete with all materials testing and recording the results as per specification.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kilograme capacity cartridge type conform to Indian Standard 2878 /15683 complete erected with necessary clamp made from 50 x 6 milimetre M.S. flat with nut & bolts routed in wall complete.

MSEDCL Service Connection Charges (may Varry as per Site Condition)

Hi Tech Infra, Aurangabad