Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L1 | Accepted-AOC Accepted being lowest quoting | |
| 2 | L2₹23.8 L+₹2.7 L (12.9%)Rejected-AOC | L2 | Rejected-AOC Rejected being higher quoting | |
| 3 | L3₹26.0 L+₹4.9 L (23.4%)Rejected-AOC | L3 | Rejected-AOC Rejected being higher quoting | |
| 4 | L4₹29.3 L+₹8.3 L (39.3%)Rejected-AOC 216 A SARASWATI NAGAR BASNI JODHPUR 342005 | JODHPUR | RAJASTHAN | 342005 | L4 | Rejected-AOC Rejected being higher quoting |
Tender Value
₹26.4 L
EMD Value
₹52,800
Closing Date
11 Jan 2022, 6:00 pmClosed
GE Hisar
Garrison Engineer Hisar Military Station Hisar 125006
CA No GE(H)-49/2021-22 REPAIRS AND PAINTING / POLISHING TO ALL TYPES OF SERVICEABLE WOODEN FURNITURE AT HISAR MIL STN UNDER GE HISAR
2021_MES_494500_1
CA No GE(H)-49/2021-22
Open Tender
Miscellaneous Works
Item Rate
300 days
Hisar Mil Stn
As per Tender documents
7 documents required · 7 mandatory
₹500
GE Hisar
₹52,800
Yes
31 Jan 2022
14 Dec 2021
13 Jan 2022
14 Dec 2021
11 Jan 2022
29 Dec 2021
Amount
Repairing table Card by replacing under mentioned unserviceable components with new one complete as per Drg No FD-352 :-
Front and rear legs of Ist Class hard wood Teak wood of size 760x40x75mm
Rails of seasoned Teak wood (Ist class hard wood ) size 100x25mm
Drawers of existing size, shape and specification all as specified and shown on drg and including 25mm dia plastic casted knob.
Table top of 18/19mm thick Particle board, exterior grade, ISI marked of size 900x900mm provided with 6mm thick all around teak edging and covered with green baize cloth of superior quality of rate not less than Rs 130/- per mtr as approved by GE.
Repairing table conference by replacing the under mentioned unserviceable components with new one complete as per Drg No FD-287 :-
Legs of 1st class hard wood (Teak wood) seasoned of size 760x60x75mm
Long rail runner of seasoned Teak wood (1st class hard wood) size 2135x100x35mm
Short rail runner after converting from the long rail retrieved from item No 2.02 here-in-before.
Stiffener of seasoned Teak wood (1st class hard wood).
Providing triangular wooden bracket of 1st class hard wood teak seasoned to joints of Legs to long and short rail of the table.
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing table Bed side by replacing the under mentioned unserviceable components with new one complete as per Drg No FD-276 :-
Top made out of 12mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white
Back side 6mm thick back plywood commercial
Bottom made out of 12mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Shelf made out of 12mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white
Both sides made out of 12mm thick Prelaminated MDF board, exterior grade, one side teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Repairing table Centre by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-274:-
Legs of 1st class hard wood seasoned (Teak wood) .
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail of Ist class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Table Centre brass by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-375 :-
10mm thick plain tinted glass round edges (smoke colour) with vacuum rubber shoe at top
Hard rubber shoe at bottom.
Repairing Table office steel 1520x860x760mm by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-289:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting long rail as retrieved against item No 6.02 here-in-before.
Stiffener of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Chair Wooden bottom by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-285:-
Front leg of 1st class hard wood seasoned (Teak wood).
Rear leg of 1st class hard wood seasoned (Teak wood).
Side Rail of 1st class hard wood seasoned (Teak wood).
Front and back rail of 1st class hard wood seasoned (Teak wood).
Stiffener of 1st class hard wood seasoned (Teak wood).
6mm thick ply wood commercial type BWR grade ISI Marked made to the shape and to replace the unserviceable sheet complete.
Repairing Chair Easy cushioned by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-358:-
Synthetic foam 40 density for seat and back as per existing size.
Leatheriest Rexene of approved shade with good texture and quality for seat and back.
Repairing Chair dining long back by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-357:-
Front leg of 1st class hard wood seasoned (Teak wood).
Rear leg of 1st class hard wood seasoned (Teak wood).
Side Rail of 1st class hard wood seasoned (Teak wood).
Front and back rail of 1st class hard wood seasoned (Teak wood).
Stiffener of 1st class hard wood seasoned (Teak wood).
Synthetic foam 40 density for seat and back.
Leatheriest Rexene of approved shade with good texture and quality for seat and back.
Repairing Table 900x600x760mm with drawer by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-283:-
Legs of 1st class hard wood teak seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting long rail as retrieved against item No 10.02 here-in-before.
Stiffener of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Table 900x600x760mm without drawers by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-284:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting long rail as retrieved against item No 11.02 here-in-before.
Stiffener of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Table Dining for 6 pers by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-273:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting long rail as retrieved against item No 12.02 here-in-before.
Bracket for joints of legs short rails & long rails made out of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing of Table dining 8 pers by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-273:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting long rail as retrieved against item No 13.02 here-in-before.
Bracket for joints of legs short rails & long rails made out of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing of Table 2’x2’ (600x600x760mm) by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-293:-
Legs of 1st class hard wood seasoned (Teak wood).
Side rails of 1st class hard wood seasoned (Teak wood).
Bracket for joints of legs short rails & long rails made out of 1st class hard wood (Teak wood) seasoned.
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Peg Table (450x300x380mm) by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-277:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail of 1st class hard wood seasoned (Teak wood).
Stiffener of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Table 1800x900x760mm by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-291:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting from long rail as retrieved against item No 16.02 here-in-before.
Stiffener of 1st class hard wood seasoned (Teak wood).
Table top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Table dressing Gents by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-379:-
Table dressing Top made out of 12mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Bottom and back made out of 12mm thick commercial plywood BWR grade.
Both side made out of 12mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around
Drawers of existing size shape and specification all as specified and shown on drg with 25mm dia plastic coated knobs.
Mirror of existing size 380x760mm and 5.5mm thick electro copper plated of polished glass sheet complete with frame of Teak wood and back plywood commercial 6mm thick.
Repairing of Table dressing Ladies by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-251:-
Table dressing Top & bottom made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Both sides made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Back side made out of 12mm thick commercial plywood BWR grade.
Drawers of existing size shape and specification all as specified and shown on drg and with 25mm dia plastic coated knobs.
Front shutter made of 4mm thick plain glass of size shape and specification as shown on drg with aluminium double channel.
Mirror of existing size 366x1220mm and 5.5mm thick electro copper plated of polished glass sheet complete with frame of Teak wood and back plywood commercial 6mm thick.
M & L for repairing of Bed hard by replacing the under mentioned unsv components/parts with new one complete as per Drg No FD-1102:-
Bed top made out of 12mm thick commercial Plywood BWR grade duly ISI marked.
Stiffner of 1st class hard wood teak (MP) of size 890x60x40mm
Long rail of 1st class hard wood teak (MP) of size 1980x90x35mm duly covered with 12mm thick prelaminated MDF board exterior grade with and including 6mm thick teak wood edging half rounded to exposed surafce all as shown on drg.
S&F new head board made out of 25mm thick prelaminated MDF board, exterior grade and having 40x40mm thick teak wood frame all around made to shape all as shown and applying polish on existing exposed wooden surface upto standard finish complete all as specfied and shown on drg.
S&F new foot board made out of 25mm thick prelaminated MDF board, exterior grade and having 40x40mm thick teak wood frame all around made to shape all as shown and applying polish on existing exposed wooden surface upto standard finish complete all as specfied and shown on drg.
Repairing Hat Stand by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-233:-
Front 4mm thick one side Teak face ply wood
6mm thick teak wood edging of looking mirror and all around the Hat Stand
Looking mirror of size as shown in drawing.
Aluminium peg hook of size as shown in drawing.
Repairing Side Board by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-241:-
Top of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Front shutter made of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Drawers of existing size, shape and specification all as specified and shown on drg and with 25mm dia plastic coated knobs.
Base batten of 1st class hard wood (Teak wood) seasoned fixed with screws.
Back side 6mm thick Commercial Ply wood BWR grade phenol formal dehyde.
Both side made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Repairing Teapoy Wooden by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-278:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail of 1st class hard wood seasoned (Teak wood).
Top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Table writing by replacing under mentioned unserviceable leg components/parts with new one complete as per Drg No FD-275 :-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Sides of 18/19mm thick Prelaminated MDF board, exterior grade, one side teak veenred face and other balancing white
Ply wood 6mm thick commercial type of back side
Top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Repairing Bench workshop by replacing under mentioned unserviceable components/parts with new complete as per Drg No FD-301:-
Legs of 1st class hard wood seasoned (Teak wood).
Long rail of 1st class hard wood seasoned (Teak wood).
Short rail by converting long rail as retrieved against item No 24.02 here-in-before.
Stiffener of 1st class hard wood seasoned (Teak wood).
Table top made out of 40mm thick teak wood planks single piece length, wrought finish all as shown on drg.
Repairing Almirah Mess utensil by replacing under mentioned unserviceable components/parts with new one complete as per Drg No FD-93 (M):-
Top made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top.
Front shutter made of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Drawers of existing size shape and specification as shown in drawing.
Base batten of 1st class hardwood (Teak wood) seasoned fixed with screws.
Back side 12mm thick Commercial Ply wood BWR grade phenol formal dehyde.
Both side made out of 18/19mm thick Prelaminated MDF board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around.
Preparing old polished wooden surfaces by sand paper and applying one coat of French polish on exposed surfaces of following furniture articles complete :-
Chair dining long back as per Drg No FD-357
Bin soild linen multipurpose as per Drg No FD-244 & FD/E6/MAP/09
Bed ply top as per Drg No FD-246
Chair writing as per Drg No FD-280
Chair easy as per Drg No FD-229
Chair dining as per Drg No FD-279
Chair dining with detachable cushion as per Drg No FD/E6/MAP/10(R)
Chair easy cushioned as per Drg No FD-358
Chair wooden bottom as per Drg No FD-285
Hat stand with mirror as per Drg No FD-233
Sofa set 5 seater as per Drg No FD-373
Sofa set 4 seater as per Drg No FD-373
Side board as per Drg No FD-241
Table dining 6 pers as per Drg No FD-273
Table dining 8 pers as per Drg No FD-273
Table writing as per Drg No FD-275
Table centre as per Drg No FD-274
Table peg as per Drg No FD-384
Teapoy (W) as per Drg No FD-278/FD-382
Table 900x600x760mm as per Drg No FD-231/FD-233/FD-284
Table 900x600x760mm (W) with drawer as per Drg No FD-231/FD-283
Table dining 120x90cm as per Drg No FD-213
Table bed side as per Drg No FD-276
Table dressing ladies as per Drg No FD-378
Table dressing gents as per Drg No FD-230
Stool dressing CB as per Drg No FD-252
Table card as per Drg No FD-288
Table conference as per Drg No FD-287
Table 600x600mm as per Drg No FD-293
Almirah mess utensils as per Drg No FD-93
Table 1520x860x760mm as per Drg No FD-289
Bench workshop as per Drg No FD-301
SAINI ELECTRIC STORE
shekhar & company
Vinayak Distributors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .