SPECIAL REPAIR TO ROAD FROM COBRA COMPLEX TO SANJAY KUMAR YADAV GUEST ROOM UNDER GE (W) JABALPUR

Amount

M&L for repair to potholes any depth, not exc 1.0Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified.

M&L for repair to pot holes any depth, not exc 1 sq.m each including sweeping free from dust and mud, or water,scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, but making good by appling tack coat at 5 Kg per 10 sq.m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq.m, blinded with 0.09 cu.m of stone chipperings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified.

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2.5mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed. Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by GE. Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE. (ii) Shape, size & pattern of marking shall be as approved by GE.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400Sqm and depth n exc 50mm by using mechanical scarifier including racking over and grading the broken-up surfaces to the proper camber and stacking complete all as directed.

Preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 10 Kg/ 10Sqm by using mechanical sprayer on prepared surface complete all as specified and as directed.

Supply & Fix, in repair, 100% waterproof solar delineator (as per IRC 79-1981) Metal, rectangular delineator, made out of 100mm X 25 mm cross section MS pipe, 1.6 mm thick, length 900mm from GL (total length =1100mm) duly stove enameled painted with three prismatic grade retro reflective sheet bands of red/white colour. Total height of bands shall not be less than 150 mm. The reflective bands shall be protected with a cage of MS welded zinc plated 12 gauge wire mesh complete all as specified and directed. (Make :- 3M or equivalent as approved by GE)

Supply and fix in repair solar cat's eye/ studs of size 125mmx 125mmx 25mm (shank 60mm) with aluminium alloy shell, high efficiency Mono-Crystalline Solar Panel 2.40V/ 0.30Watt having one Ni-Mh or NI-cd rechargable battery (1.2V/ 1600MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1000 meters of any colour i.e yellow, red, blue, green or white as required at site, working temp 10o-75o C, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hours from direct sun light, maintenance free, un-breakable poly carbonate clear facing, automatically turns on at night and turns off at dawn including all fixing arrangment as per manufactures instructions complete all as specified and directed. Make: DA 110 (DHRUV) of DARK EYE or equivalent Model of make- Road Star or Green Lite or Sun Lite as approved by GE.

Supply and fix in repair CAT'S EYE/ RAISED PAVEMENT MARKER/ ROAD STUDS OF SIZE 100x110 MM designed to provide enhanced, dependable road guidance to motorists in bad weather conditions, made out of strong ABS moulded body with polycarbonate/ PMMA (Acrylic) micro prismatic reflectors ultrasonically welded on the moulded ABS body for maximum retro reflection in wet and dry conditions and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed. Make: 3M 290 Series of Road Star or equivalent Model of make- DA 52 of Dark Eye or Green Lite or Sun Lite as approved by GE.

Supply and fix in repair polycarbonate reflective convex mirror of size 1000mm dia made of ABS/ fiber/ plastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 65 mm dia MS pipe having 2.0 M length duly painted with and including two coats of synthetic enamel paint as approved by GE over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed. Make of Convex Mirror:- RSCM-100 of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by GE.

Supply and fix in repair dual-directional speed-breaker having high intensity cube corner reflector ultrasonic welded to high impact resistant ABS plastic body of colour yellow and black of size 250x345x50mm (height) provided with 4 steel nails. Shape of side body to have interlocking pattern to keep all speed breakers in a row complete all as specified and directed. Make:CAT PART No. GPL-07-06 GREENS/GREENLITE or Dark Eye or Sun Lite or road star as approved by GE.

M&L for 100 mm thick moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete all as specified and directed.

Demolition cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of paver block complete as specified and directed..

M&L for 80mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-40 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in kerb stone, copings, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for PCC (1:2:4) type B-2, using 20mm graded stone aggregate as in surface channel and drain including saucer drain and toe wall etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Dismantling brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified & directed.

Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed.

Taking down eaves gutter, rain water pipes, AC/PVC pipes of any size or pattern including all fitting etc. complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

Supply and fixing road sign board frame made of stainless steel(SS-304) pipe 50 mm dia , 2.8 m length and 3 mm thick aluminium sheet sizes of 0.9 m height and 1.2 m width including writting of letter and logo in retro reflective tape of appropriate size and PCC foundation 1:2:4 type B-1 ( 300X300X300 mm) for embedding of SS pipe including excavation and earthwork complete all as specified & directed.

Schedule of credit amount of Rs. 13,230.00 to be deducted during AOC

Mahaveer Engineering Co.