Annual Maintenance Contract for painting work (for a period of 12 months) at Nehru Hospital Extension, PGIMER, Chandigarh

Part-A (White washing & Painting works)

Providing and applying white cement based putty of average thickness 1 mm @ 6 kg per 10 sqm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

One coat

Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Finishing walls with textured exterior paint of required shade :

Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Add water charge 0.50% difference

Part -B (Supply of Material)

Anodised Aluminium sliding door bolt 300x16 mm

Anodised Aluminium sliding door bolt 250x16 mm

Anodised Aluminium tower bolt (barrel type) 150x10 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Glass Putty ( 1kg Packets)

Rectangular Frameless 5mm Beveled edge Wall Mirror with ss screws & 4 Nos. Holes (Size 60x45cm)

White plastic seat cover (solid) with lid C.P.brass hinges and rubber buffers

Vitreous china flat back wash basin 630x450 mm

C.P. brass waste 32 mm

Vitreous china orrisa type W.C. pan size 580 mm

Vitreous china pedestal type water closet (European type W.C. pan) conforming to IS : 7231 complete.

18 mm thick block board with commercial ply veneering on both side

12 mm commercial ply

Aluminium die cast body tubular type universal hydraulic door closer IS : 3564 marked with necessary accessories and screws etc. complete.

12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I.

Gypsum Board screws (100 Nos.)

Aluminium hanging floor door stopper with twin rubber & stopper

C.P. Brass long body bibcock 15 mm

Double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked with stainless steel cover plate.

15 mm PTMT pillar cock

C.P/S.S. gully or nahani grating 100 mm dia

PTMT - Towel Rail (450 mm long )

PTMT Bottle trap 31/32 mm

15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts

Stainless steel butt hinges 100x58x1.9 mm IS: 12817 marked

Star Bit

Hard Board 6mm thick 60x45 cm with 4 Holes

Steel bit 1/8"

Masonary drill bit 6mm x 6inch

Masonary drill bit 8mm

Metal drill bit 3mm (Good quality)

Metal drill bit 4mm (Good quality)

Metal drill bit 5mm (Good quality)

Metal drill bit 6mm (Good quality)

Metal drill bit 10mm (Good quality)

Wood cutting blade 4 inch 40 teeth (Good quality)

Tile cutting blade 4 inch (Good quality)

Marble cutting blade 4 inch (Good quality)

Metal cutting blade 4 inch (Good quality)

M Seal 90 gm

Araldite 180 gm

Wd-40 lumbricating anti rust spray 420 ml

Fevi seal clear silicone sealant (not less than 280 ml)

Precast Gully Trap manhole cover with frame12"x12"

Tapecrete water proofing compound 5 litre

Safeda

Knob & lever of PVC cistern

Fevicol SR 998 (1 kg packing)

Drain Cleaner

Internal Assembly Ebony

Grey Cement (50 kg bag)

Bajri

Nails 1" long X 19No.

Nails 2"X 14 No.

Nails 3"X 14 No.

Nails 2½"X 14 No.

Moulding Nails 1¼"

Hanger 6-legged (clothing Hanger)

Wooden Screw 1¼" (100 nos. packing)

Wooden Screw 1¼" (100 nos. packing)

Wooden Screw 1½" (100 nos. packing)

Wooden Screw 1½" (100 nos. packing)

Wooden Screw 2" (100 nos. packing)

Wooden Screw 2" (100 nos. packing)

Wooden Screw 2" (100 nos. packing)

Wooden Screw 4" (100 nos. packing)

Steel Star Screw ¾" (100 nos. packing)

Steel Star Screw 1" (100 nos. packing)

Steel Screw 1½" (100 nos. packing)

Hexa Blade Double Side

Iron Cutting Wheel 5"

Wooden Cutting Wheel 5"

Grinding Wheel

PVC Waste pipe 32 mm x 1150 mm

PVC Jet

Aluminium top pivots for aluminium doors

G.I. Hexa nipple 1/2''

G.I. Hexa nipple 3/4''

G.I. Hexa nipple 1''

G.I. Hexa nipple 1x1/2"

G.I. Hexa nipple 1x1/4''

G.I. Socket 1/2''

G.I. Socket 3/4''

G.I. Socket 1''

G.I. Socket 1x1/2"

G.I. Socket 1x1/4''

G.I. Nipple 1/2''x4"

G.I. Nipple 3/4''x4"

G.I. Nipple 1/2''x6"

G.I. Nipple 3/4''x6"

G.I. Reducing Socket 3/4''x1/2"

G.I. Reducing Socket 1''x3/4"

G.I. Reducing Socket 1½"x1"

G.I. Reducing Socket 1¼"x 1½"

G.I. Hexa nipple 2''

G.I. Socket 2''

G.I. Reducing Socket 1¼"'x2''

G.I. Pipe 1/2'' (20' Length)

G.I. Pipe 3/4'' (20' Length)

G.I. Pipe 1'' (20' Length)

G.I. Pipe 2'' (20' Length)

CP extension nipple 1/2"x1"

CP extension nipple 1/2"x1½"

CP extension nipple 1/2"x2"

C.P. Magnetic Push Pillar cock

2 in 1 PTMT Bathroom faucet/hand shower with on off switch

Chrome plated 2 in 1 Bathroom faucet/hand shower

Steel Round Toilet Seat Cover Hinges Kit for One Piece Toilet Quick Release Hinges Fittings( Each Pair)

Araldite 180 gm

Rust remover lubricant spray WD-40 (170gm)

Chrome Plated Brass Auto shut urinal stop cock

PVC Bib Cock with flange 15 mm

PVC Angle Cock with flange 15 mm

White cement (1 kg packing)

PVC Rawl Plug

Anodised Aluminium handles 175 mm with plate 175 x 32 mm

Float glass sheet (Tinted ) of nominal thickness 5mm

6 mm thick commercial ply

ACP sheet 3mm

Add water charge 0.50% difference

Please Enable Macros to View BoQ information