SPL REPAIR TO DINING HALL AT C COY OF 24 GUARDS 17 GDRS UNDER AGE(I) POKARAN

Amount

B&R WORK Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting over & including 10mm thick backing coat of CM (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles size 300x450x7mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over & including 10mm thick backing coat of CM (1:4) complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n. exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F standard aluminium sections of any Type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and directed by Engr-in-Charge. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane for aluminium sliding windows/ventilator shutter etc complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed in aluminium windows complete all as specified and directed by Engr-in-Charge.

M&L for IInd class Hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made plain framed, panelled shutters (two panels) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L preparation of new steel surface and applying two coats of synthetic enamel paint ovre a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for machine cut Granite (of any type) t 20mm thick for kitchen platform over and including bedded and jointed with grey cement slurry/backing coat 15 mm thick in CM (1:4) and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including dismantling of stone slab complete all as specified and directed by Engr-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick for window cill, jambs and sofits over and including cement screed base 15 mm thk in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including dismantling of stone slab complete all as specified and directed by Engr-in-Charge.

M & L for Rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges,100mm mild steel with medium weight pin complete all as specified and directed by Engr-in-Charge.

S&F aluminium handles cast type anodised 150mm sizecomplete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm size complete all as specified and directed by Engr-in-Charge.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 300mm length complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm size complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces by applying two coats of synthetic enamel painting over one coat of pink primer on wooden surfaces exceeding 10 cm width or girth including preparation of new surfaces complete all as specified and directed by Engr-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, as in floors or fixed to walls 75 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed to walls 110 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75 mm complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/stone work or concrete surfaces and finished even and smooth without using extra cement on walls complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick cement plaster in CM 1:6 water proofing compound @ 3% by the weight of cement on brick/ stone surfaces finished fair and even without using extra cement etc complete all as specified and directed by Engr-in-Charge. Note : Water proofing compound and will be measured and paid separately.

M&L for preparation of new plastered surface of wall and applying Two coat of oil bound distemper over the alkali resistance priming paint primer over 1.5 to 2mm thick wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted surfaces including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss; efflorescent salts & trading oil, greasy spots and applying two coat of lime white wash on the ceiling etc complete all as specified and directed by Engr-in-Charge. Note :- Rate inclusive of necessary scaffolding, trestels, ladders, cradles etc required for execution of work

M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of oil bound distemper over a coat of 1.5 to 2 mm thick wall care putty of approved make & shade on walls and other places as complete all as specified and directed by Engr-in-Charge. Note :- Rate including the required scaffolding & other accesories required for painting

M&L for preparing old painted surfaces by washing, rubbing down and painted surfaces and applying a two coat of Acid resistatent paint of walls complete all as specified and directed by Engr-in-Charge.

Dismantling Stone slabs in roofs, suspended floors , chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and directed by Engr-in-Charge.

Demolition of concrete of any description and in any position (PCC Padding over roof) complete all as specified and as directed by the Engineer-in-Charge.

M&L for 50mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 50 mm as per the requirements complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPCcomplete all as specified and directed by Engr-in-Charge. Note :- WPC will be measured and paid separately as supply only

Supply only integral Waterproofing compound complete all as specified and directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced complete all as specified and directed by Engr-in-Charge.

S&F in repair anodised aluminium tubular curtain rod with fixing brackets,stops, rollers etc, 20mm dia, complete all as specified and directed by Engr-in-Charge.

Demolition of stone masonry built in cement or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) of thickness 100 mm as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for even spreading of 25mm thick layer of sand cushioning including watering & consolidation complete all as specified and directed by Engr-in-Charge.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 of M-35 grade complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in kerbs of mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engr-in-Charge.

Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends and fittings etc complete all as specified and directed by Engr-in-Charge.

E&M WORK Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with PVC unsheathed cable single core stranded copper conductor 1.5 sq mm size, 1100 V grade, drawn into casing & caping (ISI marked) not less than 20mm dia on surface with and including PVC unsheathed cable single core copper conductor 1.5 Sq mm as continuous earth wire and including pressed MS sheet sunk in box 1.12 mm thick with 2.8 mm thick laminated bakelite sheet all as specified & directed by Engr-in-charge for the following :-

One light/fan/Exh/Bell point controlled by one switch 5 Amp one way

socket outlet 3 pin 5 amps same board

Socket outlet 3pin 5 amps independent board

All as per item No.58.00 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engr-in-Charge.

S&F switch piano, flush type, single pole, one way 5 amps 230 Volts AC confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr-in-Charge.

S&F switch piano, flush type single pole, one way 15 amps 230 Volts AC confirming to IS: 3854 and ISI marked complete complete all as specified and directed by Engr-in-Charge.

S&F switch socket combination outlet, multipurpose 2/3 pin 5 Amps controlled by one switch 5 Amps flush type, complete all as specified and directed by Engr-in-Charge.

S&F universal socket outlet with shutter 5/15 Amp controlled by one switch 15 Amps, flush type complete all as specified and directed by Engr-in-Charge.

supply and fixing fan regulator electronic type five step controlled 230 volt 50 Hz for confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr-in-Charge.

S&F Lamp holder PVC polycarbonate type with back plate suitable for battern fittings complete all as specified and directed by Engr-in-Charge.

S&F LED lamp retro fit type 9 watts 230V complete all as specified and directed by Engr-in-Charge.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed by Engr-in-Charge.

S&F for sheet metal enclosure MCB DB TPN 4 way made out of 1.5 mm thick sheet metal enclosure IP 43 with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and directed by Engr-in-Charge.

S&F for sheet metal enclosure MCB SPN DB 8 way made out of 1.5 mm thick sheet metal enclosure IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and directed by Engr-in-Charge.

S&F MCB TPN 415 volts, 63 Amps, 10 KA, " C " Series complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 415 volts, 40 Amps, 10 KA C series complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 415 volts, 6 to 32 Amps, 10 KA,C series complete all as specified and directed by Engr-in-Charge.

M&L for submain wiring with PVC unsheathed cable single core stranded copper conductor 4 sqmm size, 1100 V grade, drawn through PVC casing and caping (ISI marked) not less than 25mm dia on surface with and including PVC unsheathed cable single core copper conductor 2.5 Sq mm as continuous earth wire complete all as specified and directed by Engr-in-Charge. Note : Two runs of 4.0 Sqmm copper conductor and one run of 2.5 Sqmm copper earth wire will be measured and paid as one unit only

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion complete all as specified and directed by Engineer-in-charge. Note : GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed by Engineer-in-charge.

S&F new generation energy saving and environment friendly long life versatile pressure die cast aluminium IP 66 road way light fitting with high power LED as light source of capacity 20 Watts with suitable drivers etc fixing to wall/pole and including iron bracket of 'medium grade' pipe 40 mm bore, length 1.50m, bend to required shape with 2 Set clamps made of 30x4mm FI and also including taking down old unserviceable street light fitting of any type and capacity complete all as specified and directed by Engineer-in-charge. Make :- Havells Cat No. VILUMINASL20WLED757SASYBOPC or equivalent make and model as approved by GE/AGE.

M/s Shri Inder Construction Company

M/s Rashid Mohammed