IMPROVEMENT TO CERTAIN OMQ AND ALLIED WORKS AT AF STN DEVLALI

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles.

Dismantling battens for tiles, shingles etc. of any size including tilting fillets, spaced exc.15 cm.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins etc. under 40 sq cm in section unframed work.

Dismantling wooden scantling over 40 sqcm in section and in any position

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, walls etc.

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.6 mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S & F 1.6 mm thick galvanised sheet with grade of zince coating 275 in ridges,hips,valley gutters,drip and straight flashings (length and girth as fixed) including cutting, bending to required shape & welding all as specified and as directed.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B

M & L preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamell paint over a coat of red oxide

Dismantling boarding, any description, fixed in any position with nails.

M & L for false ceiling work of aluminium snap grid system size 605x605mm for false ceiling with aluminium angles of size 23.5 mmx23.5,,x1.5mm fixed to wall with GI screws and aluminium tee of size 37.5x37.5x1.5mm in main and cross runners fixed 60 cm c/c and tied to existing roof/truss/rafters complete

M & L for hanging of aluminium false ceiling grid with 3 mm dia GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified.

M & L Non asbestos fibre cement building boards 6 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Taking down carefully existing bitumen tar felt including plaster/existing PCC padding, wire brushing and cleaning of the surface of roof, terraces including flashing and junctions of parapets/ Kerbs walls etc and removing of the rubbish to a distance exc 500m but n.exc 1.5km and depositing where directed .

M & L 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof paddding complete all as specified and as directed.

M & L 15 mm thick bedding layer in CM (1:4) on concrete surfaces (When concrete is green) mixed with WPC @ 2% by weight of cement finished the surfaces fair and even complete all as specified and directed. (Note : WPC shall be measured and paid separately).

Supply only integral water proofing compound.

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm of M/S TEXSA Ltd or M/S TIKI Asphalt hydro stop or IWL 3.00kg/sqm membrane (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Painting with one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coat of aluminium paint @ 100ml/Sqm

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces/ceiling finished even and smooth without using extra cement.

M & L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work of walls in cement mortar 1:6 finished even and fair.

M & L rendering 15mm thick on brick or concrete surfaces in CCM 1 : 4 finished fair & even. (Note : Water proofing compound paid under Separate item )

Preparation of surfaces of plastered or unplastered new surfaces of ceiling applying three coats of white wash complete all as spesified and directed.

M & L for preparation of new plastered surface and applying two coat of oil bound distemper on walls complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces of wall including complete removal of existing surfaces.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of new wall surfaces.

M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.

M&L for 1mm thick JK/Birla wall care putty inccluding prepration of surface complete all as specified and as directed

Preparation of surfaces of plastered or unplastered old surfaces of ceiling applying three coats of white wash complete all as spesified and directed.

S & F factory made 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete.

S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F figured glass ,pin head type 3mm thick and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed.

S&F powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Suuply and fixing stainless steel plate rack of size 750x900x250 all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (above ground level)

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base all as specified & diretced.

M & L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed

M & L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm screed bed or bedding layer CM 1 : 6 .

M & L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm screed bed or bedding layer CM 1 : 6 .

M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 .

M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 15 mm screed bed or bedding layer CM 1 : 6 .

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

M & L machine cut Cudappah stone slab flooring 20 thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L granite (of any type and any colour) work (table rubbed & polished), 15 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,over M & L 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finish.

M & L Chamfering, splays or arris in facework exc 15 mm but n exc 50 mm wide

M & L 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and surface to be finished without using extra cement .

Taking down chowkats or frames with shutters not exe 1.5 sq.m (without taking of shutter from the frame).

Taking down chowkat or frames exe 1.5 sq.m but not exc 4 sq.m each with shutters (without taking of shutter from the frame).

S & F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M & L for factory made IInd class hard wood 35 mm thick plain, framed, panelled shutter (two panel), with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial venerring on both faces. The size of rail and stile as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated.

S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and single sides prelam PVC sheet and stile & rails having one side feathered edge and on other side 10mm (90°) bent edges & as gap insert for top rail & bottom rail; Panelling to be fitted in the M.S. frame welded/ sealed to the styles & rail with suitable PVC sheet beading, and joint together with solvent cement, all as specification and drawing.

M & L preparation of new wooden surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F cold rolled mild steel butt hinges 100 mm size medium weight complete all as specified and directed.

S & F aluminium alloy barrel tower bolt 150mm long

S & F 150mm aluminium alloy handles cast/plate type

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S & F pre -coated fancy type drapery 25mm dia fixed with fancy type matching pair of brackets fixed with screw (Note : Brackets will be measured seprately)

S & F fancy type brackets to suit pre-coated curtain rod 25mm dia

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store

S & F GI tubing 15mm bore medium grade with all fittings and fixed to wall, ceiling or laid in floor

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store

S & F GI tubing 20 mm bore medium grade with all fittings and fixed to wall, ceiling or laid in floor

Dismantling unserviceable water tank of capacity 1000 ltrs of any description and removing to store complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F in repairs ball brass valves, high pressure, with polythene float and flynut for 20mm bore dia pipe compelet screwed for iron pipe or brass ferrule and fixed.

S & F in repairs wash hand basins, vitreous china( oval type) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S & F for waste coupling of brass chromium plated 32mm bore (half or full threaded) suitable for wash basins.

S & F in repairs wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixe all as specified and directed by Engr-in-Charge.

S & F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends fancy type chromium plated concealed for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends fancy type chromium plated for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down chromium plated fancy type for iron pipe and fixe all as specified and directed by Engr-in-Charge.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S & F in repair bib taps 15 mm bore, cast copper alloy, chromium plated , fancy type .

S & F in repairs coloured vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc,

S & F in repair health faucet including flexible pipe and MS anodised hanging device all as directed. Make : Cera/ Hindware or equivalent.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S & F in repairs PVC low level flushing cistern of syphonic action type 10 ltr capacity fixed to wall with bracket and screwed including PVC flush pipe complete fitting including taking out unserviceable flushing cistern and flush pipe etc.

S & F in repairs brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S & F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S & F in repairs toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110 mm dia as in floor/wall

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75 mm dia as in floor/wall

S & F PVC (SWR) vent cowl 110 mm dia

S & F PVC (SWR) bends 110 mm dia

S & F PVC (SWR) bends 110 mm dia with access door

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S & F 40mm dia PVC flexible waste pipe for sink.

S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F modular shutters of MDF factory made finished boards 20mm thick with self closing hinges, powder coated handles, magnetic lock system etc for SS baskets fitted below the cooking platform complete all as specified.

S&F Moduler kitchen sliding type stainless steel basket with framing along with rail ,overall width of framing not less than 50cm and exc 75 cm and depth of framing exceeding 20cm including all necessery fittting and fixtures all as specified and directed by Engr-in-charge.

S&F Moduler Kitchen cabinet along with shutters and shelves having depth not less than 30 cm with necessery partitions inside the cabinet with MDF factory made finished boards 20mm thick with self closing hinges , powder coated handles, magnetic lock system etc complete all as specified.

M&L in repair for 25 mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type `BB', fixed with screws to timber frame work

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) in 40 mm.

All as per item No 108 above but width of flaps (when open) in 30 mm.

S & F in repairs hasp and staple of size 100 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws.

M&L Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M & L mild steel work as in wind ties,hold fast and brackets for holding boarding etc

S & F aluminium Hat pegs, solid body, 125mm to 175 mm

M & L for drilling holes for pipes etc in granite /cadappa including RCC slab n exc 25mm dia and nexc 100 mm depth

M&L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6

Dismantling precast RCC fencing post of any section including taking out embedded portion and making good disturbed ground complete all as directed.

Dismantling of fencing wire mesh any type

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Excavating in post holes (or similar holes ) each n. exc. 0.5 cum & getting out in any type soil & removing soil to distance n.exc. 50 m. & making good surface.

M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation.

S & F mild steel angle in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.

S & F MS screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other end to be fitted with washers and one hexagonal or square nut exc 5 cm but not exc 10cm long dia of shank 5 to 10mm.

Supply only chain link fencing made out of 3.8mm to 4mm dia, galvanised MS wire,size of mesh 50mm x 50mm.

Fixing only chain link fencing of wire mesh size 50mmx50mm including line wires and type of standrad tails straining bolt etc including provison of binding wire.

M & L Mild steel round bar 10mm dia and over, cut to length, bent to shape required, including cranking Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed

M & L for preparation of new steel surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Taking down carefully aluminium/copper point wiring (light,fan,socket power etc) on TW batten/PVC casing capping, surface steel/PVC conduit including all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surfaces.

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for the One light/fan point controlled by one switch.

All as per item No 129 but for One 3 pin socket out let 5 Amps on independent board.

All as per item No 129 but for One 3 pin socket out let 5 Amps on Same board.

All as per item No 129 but for One bell point controlled by one push button.

All as per Sl item No 129 above but with two runs of 2.5 Sq.mm cable and one run of 1.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.

Supply and fixing switch modular 6 Amps 230 Volts one way switch. Make Anchor Roma/Legrand Aretor/Crabtree

S&F Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

S&F lamp holder PVC/ Poly carbonate type with back plate suitable for batten fitting SP 230 Volts

S&F ceiling rose,3 phase/ PVC /polycarbonate isolated body,65x50 mm two to three terminals

S & F Modular Bell push 6A,1way, 1module, complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree

S&F electric bell Ding Dong AC 230 volts single pole.

S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree

Material and labour for taking down the exsting ceiling fan and reparing the same including replacemet of bearing and painting , making servicable and refixing the same at same exsting location all as specified and directed.

Supply & fixing decorative ultra slim square profile linear LED PRIDE PLUS TRIYCA lighting fixture extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack Triyca Batten 20 W 6500 K, complete all as specified and as directed by Engineer-in-Charge. Make: Havells , (CAT No.LHEXAXPNIN1W020) or equivalent in Philips/Bajaj/Wipro.

Supply & fixing decorative ultra slim square profile linear AUSTRA MIRROR LIGHT 20 W lighting fixture extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack 20W LED 6500K, complete all as specified and as directed by Engineer-in-Charge. Make: Havells , (CAT No.LHLDESAARANC020) or equivalent in Philips/Bajaj/Wipro.

S& F and connecting up surface mounting decorative LED PDC Housing LED Bulkhead Luminaire with Opal diffuser, equipped with 2 kV in-built surge protection with IP65 protection rating. and including size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Bjaj (CAT NoBIBWP 10W LED ) or equivalent in PhilipsHavlles/Cromton Greaves.

S&F sheet metal enclosure distribution board 415V, Vertical TPN 4 way with provision for DHx100 series MCCB of Legrand make as incomer & SP/TP MCBs as outgoing as per IS including compact insulated bus bar & rounded neutral bar, door earthing complete double door surface /recess mounting IP-43 protection of L & T Cat NO. DBVTL004GD or equivalent in legrand/siemens, complete all as specified and directed by Engineer-in-Charge.

S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 8 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Indoasian/L&T/HPL

S&F MCB SP 6-32 Amp.

S&F MCB SPN 40 Amp.

S&F wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulating copper stranded conductor single core cable in surface/ recesed as required earth wire in and including PVC Casing Caping of suitable standard size of :- Two run of copper conductor of size 4.0 sq. mm + One run of 4.0sq. mm as earth wire.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead wire 4 mm fixing on wall by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-2 and CI cover with frame all as shown in electrical plate No. 5 of SSR part-I all as specified and directed

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out soft/loose type soil.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point.

M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 50 mm dia complete with coupler, elbows, joints,& necessary space parts complete all as specified

Supply and lay in trenches/floor/on wall/ on surface with necessary fixing accesseries LT XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

Supply & fixing exhaust fan metal body 300 mm sweep suitable to work on 230 Volts 50 Hz AC supply including making suitable hole for exhaust fan ventil air DB green of Havells (Cat No FHVVEMTDBB12) or equivalent of CG/Bajaj including connecting to ceiling rose all as required or directed.

S&F new Storage water heater 25 ltrs capacity vertical mounting AC 230 Volts BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, PVC Flexible connections with length 450mm long 15mm dia with brass hexagonal adoptors both side duly ISI marked Suitable for hot/cold water complete including grouting of nuts and bolts, complete all as specified and directed Make Havells (Cat No GHWAHPSWH025) Havells/Venus/V Gaurd

Supply and fixing 60 watts LED building security light fitting including suitable bracket and nut bolts etc all as specified and directed by engr in charge

S&F sheet metal encloser for industrial socket of single pole and earth enclosure with two pin and earth plug with socket complete with one single ploe MCB of 20 Amp all as per directed by Engineer in charge.

Vinod Enterprises (BID ID -3093933)

M/S R.K.S. CONSTRUCTION (BID ID -3095552)

N.U. MIRZA (BID ID -3095525)