Stage Contract in Engineering Complex at Raj Bagh (Jal Shakti) for the year 2024-25 (under MandR) Part 2nd

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth 50 meter beyond 1m from cutting edge or as directed in all kinds of soil.

Providing & Laying of stones hand packed with quarry stones including all carriages upto site of work. Complete Job.

Providing & laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:5:10 (1 Cement: 5 coarse sand : 10 graded crushed stone aggregates nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure above plinth level upto floor V level in Cement mortar 1:6 ( 1 cement : 6 coarse sand) and Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) All works upto plinth level.

Reinforcement for R.C.C work including bending, binding, straightening, cutting & placing in position all complete. TMT Bars

15mm cement plaster finished with a floating coat of neat cement of mix : 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. It also includes all carriages upto site.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete in colour such as White, Ivory, Grey, Fume Red Brown. It also includes all carriages upto site.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610mm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with F.P.S. bricks with class designation 75

Providing and fixing of 63 Amp MCB DP ISI marked of reputed make like Havells/Schneider duly tested and commissioned.

Providing and fixing of 16 Amp MCB DP ISI marked of reputed make like Havells/Schneider duly tested and commissioned.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) complete

Applying priming coat: i. With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

French spirit polishing, one or more coats on old work.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete i. On steel work

Providing and fixing of wall paper of reputed make ISI mark including all sorts of carriage and labour charges required for the job as per site requirement complete job as per the directions of Engineer –in-charge.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Cleaning of Septic tank including disposal from direction office Rajbagh to dumping site lead avg. lead 6Kms as per direction of Engineer-in-charge complete job.

Providing and fitting of (brass) 40 mm size Cupboard lock 6 levers (of approved quality)

Repairs to cupboard by way of replacement of shelves by 12mm thick water proof particle board, taking out existing wooden shutter, repairs by cutting, painting etc. and re-fixing of repaired shutters to existing frames, including replacement of hinges with screws etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing 15 cm high drawer of the cupboard with 12 mm thick base and side planks with wooden handles and 20x25 mm runner fixed with screws complete including painting and polishing. Note: Overall plan area of the drawer shall be measured. i. Second class Kail Wood

Providiing and fixing of electrical points (heating and lighting) including cost of wire (4/1.5m), switches, necessary MCB’s switch board, ceiling roses, 3&2 pin sockets (16A/6A) of reputed make ISI mark, casing / conduit material of all sorts of carriage and labour charges required for the job. i. Lighting Points

ii. Heating Points

General servicing / overhauling of AC’s having capacity 1.5/2.0 Ton including filling of gas and repairs to voltage stabilizer complete job as per the direction of Engineer-in-charge.

General servicing / overhauling of wall mounted heating blowers including repairs to heating coils, fan, switches etc. as per the directions of Engineer-in-charge. Complete Job.

Providing and placement of steel (Dunlop) chairs of standard quality ofreputed make. The job inlcuides all taxes, levies etc. complete job as per the direction of the Engineer-in-charge.

Manufacturing, Providing, Fixing, Installation of any number of retro-reflective signage system /boards as directed by Engineer-in-charge of 2mm thick aluminium alloy highly stressed sheeting plates of different size and specifications having properties of anti-corrosion, weather resistant, colour stability, extreme durability and extreme visibility in all weather conditions in accordance with the international brand complete with computer aided machine process subject matters, logos symbols, borders arrow text size in English / Urdu as directed by Engineer-in-charge and graphics by way of cut out, printing application in green and white colour which includes providing of fancy type metal stanchion upto 300cm length of40mm OD with 90mm decorative dome shaped top including supporting stiffeners for strengthening of the job wherever necessary with providing of 15cm long resting toe plates fitted at bottom for embedding which also includes suitable technical provisions by way of accurate pre-drilled holes to enable anti-theftrivetting system and other necessary allied hardware required for the job and priming / cladding, painting of ISC which also includes installation, erection, hoisting and fixing in position including embedding of signage / metal stanchion at various locations or site including packing / carriages, handling / rehandling / loading /unloading / leads/ lifts and head load necessary with tools / plants and all consumable electric energy gases etc. as and when required for scaffolding as per requirement of site (retro-reflective signages of super-engineering grade with fancy type metal stanchion in structural steel frame and all installation charges, complete in all respects.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: i. Flexible pipe (40 mm dia).

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. i. Rectangular shape 453x357 mm

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: i. 10 liter capacity -White

Providing and fixing uplasticized PVC connection pipe with brass unions i. 45 cm length (15 mm nominal bore

Providing and fixing of (brass) spindles for mixers, angle valves of wash basin, geysers and low level flushing cisterns will all fittings and fixtures complete as per the directions of Engineer-in-charge.

Providing and fixing of complete electric kit for gyser with all fittings and fixtures complete

Repairs to central conference table by way of taking out existing wooden supports repairs by cutting, painting etc. and refixing of repaired supports to existing frame work, including replacement of hinges with screws etc. as required all complete as per the directions of Engineer-in-Charge.

Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete

Providing and fixing AN59SL Slimline 2.5mm Aluminium Stair Nosing supplied pre-drilled and countersunk in the channel for concealed fixing and on-site retro fitting of the infill, or through the infill with smooth pips supplied to cover the screw heads.

Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately). i. Flat pressed 3 layer particle board or graded wood particle board grade-I type-II conforming to IS” 3087 edges to be painted with polyurethane primer.

Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: i. Panelled or paneled and glazed shutters: a. Second class kail wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (35mm thick) i. Second class Kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (35mm thick) i. Second class Kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. i. Second Class kail wood

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) i. For fixed portion a. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) i. With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing of thermocoal foam 10mm thick for matting of approved make using adhesive SR-998 as per the directions of Engineer-in-Charge.

Providing and fixing of wall to wall carpet 20mm thick for matting of approved make and design using adhesive bonding agent SR-998 as per the directions of Engineer-in-Charge.

Providing and fixing of (Brass) curtain rod 20 mm dia 1.25 mm thick.

Providing and fixing of (Brass) brackets (curtain rods) 20 mm

Providing and fixing of curtains of approved cloth and design make (size 4’-0” x 7’-0”) including rings of approved brand as per the directions of Engineer-in-Charge.

Providing and placement of (size 4’-0” x 6’-0”) black striped single bed cotton mattress of approved make as per the directions of Engineer-in-Charge.

Supply of blanket mink thickness not less than 15mm of approved make as per directions of Engineer-in-Charge. (Double size)

Supply of cotton pillow (size 16”x24”) with cover of approved make as per directions of Engineer-in-Charge

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : i. Of sectional area 40 sqcm. and above.

Repairs to plastic paneling by way of replacing of damaged existing by new of approved make as per directions of Engineer-in-Charge.

Providing and fixing of extension chords of reputed make complete having 3No. pin, 16A/2-pin, 6A Sockets in combination with 6A on / off switch 4mm wire for a length of 5m as per directions of Engineer-in-Charge.

Providing and fixing of C.P Soap Case of approved make with latest IS Specifications.

Supply of LED lamp 15W of approved make as per directions of Engineer-in-Charge.

Providing and fixig of KENT Supreme Plus RO Water Purifier of reputed make / RO+UV+UF+TDS Control+UV in Tank / Wall Mountable / Zero Water Wastage / Patented Mineral RO Tech / 8L Storage / 20L/hr Output / white reputed make including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.

Providing and placement of 183L 3 Star Digital Inverter Direct Cool Single Door Refrigerator (RR20C1723S8/HL, Siliver, 2023 Model) of reputed make including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.

Providing and placement of executive office table (size 6’-0” x 4’-0”) of reputed make with 3 No. drawers on each side left / right including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.

Providing and placement of executive office chairs of reputed make including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.

Providing and placement of wooden file locker (size 4’-0” x 1’-6” x 6’-0”) for office of reputed make including all carriage upto site of work complete job as per the directions of Engineer-in-Charge.

Manufacturing, Providing, fixing, Installation of any number of acrylic2D honour board having alphabetical sign content of 5mm thick of different sizes and specifications complete with computer order machine process subject matter, logos, symbols, boarders, text size etc. in Engligh as directed by Engineer-in-Charge decorative dome shaped top including supporting stiffeners whenever necessary including all types of carriage upto site of work complete job.

Providing and fixing of MCC B 4 Pole 100 Amp ISI marked of reputed make like Havells /Schneider-dully tested and commissioned including all carriages as required all complete job as per the Directions of Engineer incharge

Providing and fixing of Godrej CO71 almunium alloy door closer (Metallic Silver) as required all complete job as per the directions of Engineer incharge.

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan

Providing and fixing of armercable (4Pole)ISI Marked of reputed make (guage 150mm).

Providing and fixing of wooden almirah partly framed with glass of size 6” x 4” and as approved by Engineer Incharge.

Providing and fixing of wooden waiting bench including all carriages as required all complete job as per the directions of Engineer incharge of size 6” in length, 2” in width and 21/2” in height with foam cushions.

Providing and placement of intercom including fittings, wiring and other repairs as per requirement complete job as per the direction of Engineer incharge.

Providing and fixing of Godrej steel drawer type locker as required complete job as per the directions of Engineer incharge.

Providing and placement of wooden centre table size 3x4 feet and 2x2 feet centre table reputed make including all carriages upto site of work complete job as per the directions of Engineer incharge.

Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : i. Flat pressed 3 layer particle board or graded wood particle board IS:3087 (12mm thick)

Providing and fixing of horizontal zebra blind Curtains including all acessaries approved brand as per the directions of Engineer incharge.

Providing and fixing of 9kg cylinder including stand etc. Powder fir extinguisher.

Providing and fixing of 12mm thick rait wood panelling as approved by Engineer Incharge using 25mm / 40mm headless nails etc.

Carriage of material from different sources to actual site of work by mechanical transport. i. Stones, soling and screening avg. lead 20 Km

ii. Sand and Stone agg. 20mm nominal size avg. lead 20 Km.

iii. Stone aggregate 40mm nominal size avg. lead 20 Km.

iv. Cement and steel avg. lead 30 Km

v. Bricks avg. lead 15 Km.

TASLIM AHMAD DAGGA (BID ID -2217151)