Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.5 LAccepted-AOC DHARAM SALA SINGHAN CHADOORA DISTT BUDGAM J K | CHADOORA | BUDGAM | JAMMU AND KASHMIR | ₹12.5 L Quoted ₹13.4 L | L-1 | Accepted-AOC Lowest and Reasonable |
| 2 | L-2₹13.9 L+₹46,560 (3.47%)Rejected-Finance | ₹13.9 L+₹46,560 (3.47%) | L-2 | Rejected-Finance Other than Lowest |
| 3 | L-3₹14.8 L+₹1.4 L (10.6%)Rejected-Finance DHOBI MOHALLA BATMALOO SRINAGAR 190010 J K | SRINAGAR | SRINAGAR | J K | 190010 | ₹14.8 L+₹1.4 L (10.6%) | L-3 | Rejected-Finance Other than Lowest |
| 4 | L-4₹15.5 L+₹2.1 L (15.4%)Rejected-Finance | ₹15.5 L+₹2.1 L (15.4%) | L-4 | Rejected-Finance Other than Lowest |
| 5 | L-5₹16.1 L+₹2.7 L (19.8%)Rejected-Finance | ₹16.1 L+₹2.7 L (19.8%) | L-5 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | M/s Bilal Construction L2 | M/S ASHRAF CONSTRUCTIONS L3 | M/S A.R TANTRAY L5 | M/S UTA MOTORS L4 | M/S M.Y Enterprises L6 | M/s Jaipal Associates L1 |
|---|---|---|---|---|---|---|---|---|---|
| .01Note for all items of this BOQ: - Contractor special is invited that at site DG set of Make:- Kirloskar / Cummins / Greaves / Ruston are installed. Make of spear part of DG set shall be as recommended by OEM, except for the items make specified under respective item(s) of this BOQ. | |||||||||
| 1.00 | Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 7.5 KVA to 40 KVA ( Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator, complete all as specified and directed by the Engr- in- charge | 8 | Each Job | 800 ₹6,400 | 2,000 ₹16,000 | 1,100 ₹8,800 | 1,500 ₹12,000 | 3,500 ₹28,000 | 400 ₹3,200 Lowest |
| 2.00 | Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 55 KVA to 100 KVA ( Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator complete all as specified and directed by the Engr- in- charge | 5 | Each Job | 800 ₹4,000 | 3,000 ₹15,000 | 1,500 ₹7,500 | 1,500 ₹7,500 | 5,000 ₹25,000 | 600 ₹3,000 Lowest |
| 3.00 | Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 125 KVA to 250 KVA (Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator complete all as specified and directed by the Engr- in- charge | 12 | Each Job | 800 ₹9,600 Lowest | 4,500 ₹54,000 | 1,500 ₹18,000 | 1,500 ₹18,000 | 8,000 ₹96,000 | 900 ₹10,800 |
| 4.00 | Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 400 KVA to 625 KVA ( Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator complete all as specified and directed by the Engr- in- charge | 3 | Each Job | 800 ₹2,400 Lowest | 8,000 ₹24,000 | 2,500 ₹7,500 | 2,000 ₹6,000 | 10,500 ₹31,500 | 1,300 ₹3,900 |
| 4.01Note For Item No 1 to 4: (i) Engine oil, spares parts will be measured and paid separately as supply only under relevant items of this BOQ. (ii) Cleaning & maintenance of Radiator & Oil cooler will be measured and paid separately under relevant items of this BOQ. (iii) The contractor shall submit documentary evidence that maintenance / servicing done by OEM of DG set and same shall be defaced by Engineer-in-Charge. | |||||||||
| 5.00 | Supply & Filling inhibitor corrosion anti freeze coolant filling in DG set of capacity 7.5 to 625 KVA, complete all as specified and as directed by the Engineer-in-Charge. | 200 | Ltrs | 380 ₹76,000 | 150 ₹30,000 Lowest | 400 ₹80,000 | 230 ₹46,000 | 285 ₹57,000 | 220 ₹44,000 |
| 6.00 | Supply only Engine oil 20W/40, complete all as specified and directed by Engr-in-charge.
Make :- Castrol / Servo / Indian Oil | 600 | Ltrs | 312 ₹1,87,200 | 220 ₹1,32,000 | 250 ₹1,50,000 | 275 ₹1,65,000 | 390 ₹2,34,000 | 180 ₹1,08,000 Lowest |
| 7.00 | Supply only air cleaning element inner and outer with necessary ‘O’ rings suitable for DG Set of capacity 7.5 to 40 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each Job | 2,200 ₹13,200 | 1,800 ₹10,800 | 1,000 ₹6,000 | 900 ₹5,400 | 1,200 ₹7,200 | 300 ₹1,800 Lowest |
| 8.00 | Supply only air cleaning element inner and outer with necessary ‘O’ rings suitable for DG Set of capacity 55 to 100 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge. | 4 | Each Job | 2,400 ₹9,600 | 2,500 ₹10,000 | 1,500 ₹6,000 | 900 ₹3,600 | 1,500 ₹6,000 | 700 ₹2,800 Lowest |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
26 Aug 2025, 6:00 pmClosed
GE (AF) Srinagar
Garrison Engineer (AF) Air Force Station Srinagar 190 007
REPAIR/ROUTINE MAINTENANCE OF DG SETS INSTALLED AT VARIOUS LOCATIONS UNDER GE (AF) SRINAGAR
2025_MES_723185_1
GE (AF)/SGR-40/2025-26
Open Tender
Civil Works
Item Rate
180 days
AOR of GE (AF) Srinagar
Please refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹52,000
Yes
6 Sept 2025
29 Jul 2025
28 Aug 2025
29 Jul 2025
26 Aug 2025
12 Aug 2025
Amount
Note for all items of this BOQ: - Contractor special is invited that at site DG set of Make:- Kirloskar / Cummins / Greaves / Ruston are installed. Make of spear part of DG set shall be as recommended by OEM, except for the items make specified under respective item(s) of this BOQ.
Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 7.5 KVA to 40 KVA ( Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator, complete all as specified and directed by the Engr- in- charge
Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 55 KVA to 100 KVA ( Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator complete all as specified and directed by the Engr- in- charge
Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 125 KVA to 250 KVA (Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator complete all as specified and directed by the Engr- in- charge
Deployment of manpower / tools etc for carrying out Preventive Maintenance / routine maintenance as 'B' check norms for DG Set of capacity 400 KVA to 625 KVA ( Make:- Kirloskar / Cummins / Greaves / Ruston) through authorised / approved agency by OEM, comprising Inspection and checking as per B-check parameter i.e. lubrication service, lube oil filter, cooling system, fuel system, fuel filter, servicing of air filter and bypass filter, servicing and testing carried out of batteries, engine including replacement of oil filters, fuel filters, air filter, 'O' rings and drain out the old engine oil and filling up with the new engine oil including testing of diesel generator complete all as specified and directed by the Engr- in- charge
Note For Item No 1 to 4: (i) Engine oil, spares parts will be measured and paid separately as supply only under relevant items of this BOQ. (ii) Cleaning & maintenance of Radiator & Oil cooler will be measured and paid separately under relevant items of this BOQ. (iii) The contractor shall submit documentary evidence that maintenance / servicing done by OEM of DG set and same shall be defaced by Engineer-in-Charge.
Supply & Filling inhibitor corrosion anti freeze coolant filling in DG set of capacity 7.5 to 625 KVA, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Engine oil 20W/40, complete all as specified and directed by Engr-in-charge. Make :- Castrol / Servo / Indian Oil
Supply only air cleaning element inner and outer with necessary ‘O’ rings suitable for DG Set of capacity 7.5 to 40 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only air cleaning element inner and outer with necessary ‘O’ rings suitable for DG Set of capacity 55 to 100 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only air cleaning element inner and outer with necessary ‘O’ rings suitable for DG Set of capacity 125 to 250 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only air cleaning element inner and outer with necessary ‘O’ rings suitable for DG Set of capacity 400 to 625 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only fuel filter with ‘O’ rings suitable for DG Set of capacity 7.5 to 40 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only fuel filter with ‘O’ rings suitable for DG Set of capacity 55 to 100 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only fuel filter with ‘O’ rings suitable for DG Set of capacity 125 to 250 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only fuel filter with ‘O’ rings suitable for DG Set of capacity 400 to 625 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Lub Oil filter with ‘O’ rings suitable for DG Set of capacity 7.5 to 40 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Lub Oil filter with ‘O’ rings suitable for DG Set of capacity 55 to 100 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Lub Oil filter with ‘O’ rings suitable for DG Set of capacity 125 to 250 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Lub Oil filter with ‘O’ rings suitable for DG Set of capacity 400 to 625 KVA as per existing make and model, complete all as specified and as directed by the Engineer-in-Charge.
M&L for disconnecting the oil cooler from DG Set of capacity 7.5 to 40 KVA (Make:- Kirloskar / Cummins / Greaves / Ruston) from the the existing locations by removing of all mechanical connections and taking down from the engine for complete servicing, opening into parts and cleaning thoroughly by using chemical cleaning and pressure testing, refixing back to its original positions with 'O' rings / gaskets, complete all as specified and directed by the Engg- in- Charge
M&L for disconnecting the oil cooler from DG Set of capacity 55 to 100 KVA (Make:- Kirloskar / Cummins / Greaves / Ruston) from the the existing locations by removing of all mechanical connections and taking down from the engine for complete servicing, opening into parts and cleaning thoroughly by using chemical cleaning and pressure testing, refixing back to its original positions with 'O' rings / gaskets, complete all as specified and directed by the Engg- in- Charge
M&L for disconnecting the oil cooler from DG Set of capacity 125 to 250 KVA (Make:- Kirloskar / Cummins / Greaves / Ruston) from the the existing locations by removing of all mechanical connections and taking down from the engine for complete servicing, opening into parts and cleaning thoroughly by using chemical cleaning and pressure testing, refixing back to its original positions with 'O' rings / gaskets complete all as specified and directed by the Engr- in- Charge
M&L for disconnecting the oil cooler from DG Set of capacity 400 to 625 KVA (Make:- Kirloskar / Cummins / Greaves / Ruston) from the the existing locations by removing of all mechanical connections and taking down from the engine for complete servicing, opening into parts and cleaning thoroughly by using chemical cleaning and pressure testing, refixing back to its original positions with 'O' rings / gaskets, complete all as specified and directed by the Engg- in- Charge
M&L for disconnecting all the incoming and out going rubber hoses and drain out the water from the choked radiator assembly of DG sets of capacity 7.5 to 40 KVA, taking down the radiator assembly by unscrewing all mechanical connections from the existing mounting, transporting the same to civil workshop for carrying out Chemical cleaning, opening the top and bottom covers of the radiator assembly cleaning thoroughly the chocked pipe of the radiator, cleaning of all the deposited sediments in the pipes / tubes including arresting of leakage by means of soldering, brazing and re-fixing the same to its original position with suitable size of nut, bolt and washers etc, complete all as specified and directed Engineer-in-Charge.
All as per item No 23.00 here in above for carrying out all the work mention under item No 23.00 above and including replacement of old unserviceable copper core and fins completely with new Copper Core and fins, pressure testing, complete all as specified and directed Engineer-in-Charge. Note : - (i) Repair maintinance of rediater work shall be carried out through authorised agency by OEM. (ii) The contractor shall submit documentary evidence that maintenance / servicing done by OEM of DG set and same shall be defaced by Engineer-in-Charge.
M&L for disconnecting all the incoming and out going rubber hoses and drain out the water from the choked radiator assembly of DG sets of capacity 55 to 100 KVA, taking down the radiator assembly by unscrewing all mechanical connections from the existing mounting, transporting the same to civil workshop for carrying out Chemical cleaning, opening the top and bottom covers of the radiator assembly cleaning thoroughly the chocked pipe of the radiator, cleaning of all the deposited sediments in the pipes / tubes including arresting of leakage by means of soldering, brazing and re-fixing the same to its original position with suitable size of nut, bolt and washers etc, complete all as specified and directed Engineer-in-Charge.
All as per item No 25.00 here in above for carrying out all the work mention under item No 25.00 above and including replacement of old unserviceable copper core and fins completely with new Copper Core and fins, pressure testing, complete all as specified and directed Engineer-in-Charge. Note : - (i) Repair maintinance of rediater work shall be carried out through authorised agency by OEM. (ii) The contractor shall submit documentary evidence that maintenance / servicing done by OEM of DG set and same shall be defaced by Engineer-in-Charge.
M&L for disconnecting all the incoming and out going rubber hoses and drain out the water from the choked radiator assembly of DG sets of capacity 125 to 250 KVA, taking down the radiator assembly by unscrewing all mechanical connections from the existing mounting, transporting the same to civil workshop for carrying out Chemical cleaning, opening the top and bottom covers of the radiator assembly cleaning thoroughly the chocked pipe of the radiator, cleaning of all the deposited sediments in the pipes / tubes including arresting of leakage by means of soldering, brazing and re-fixing the same to its original position with suitable size of nut, bolt and washers etc, complete all as specified and directed Engineer-in-Charge.
All as per ser item No 27.00 here in above for carrying out all the work mention under item No 27.00 above and including replacement of old unserviceable copper core and fins completely with new Copper Core and fins, pressure testing, complete all as specified and directed Engineer-in-Charge. Note : - (i) Repair maintinance of rediater work shall be carried out through authorised agency by OEM. (ii) The contractor shall submit documentary evidence that maintenance / servicing done by OEM of DG set and same shall be defaced by Engineer-in-Charge.
M&L for disconnecting all the incoming and out going rubber hoses and drain out the water from the choked radiator assembly of DG sets of capacity 400 to 625 KVA, taking down the radiator assembly by unscrewing all mechanical connections from the existing mounting, transporting the same to civil workshop for carrying out Chemical cleaning, opening the top and bottom covers of the radiator assembly cleaning thoroughly the chocked pipe of the radiator, cleaning of all the deposited sediments in the pipes / tubes including arresting of leakage by means of soldering, brazing and re-fixing the same to its original position with suitable size of nut, bolt and washers etc, complete all as specified and directed Engineer-in-Charge.
All as per ser item No 29.00 here in above for carrying out all the work mention under item No 29.00 above and including replacement of old unserviceable copper core and fins completely with new Copper Core and fins, pressure testing, complete all as specified and directed Engineer-in-Charge. Note : - (i) Repair maintinance of rediater work shall be carried out through authorised agency by OEM. (ii) The contractor shall submit documentary evidence that maintenance / servicing done by OEM of DG set and same shall be defaced by Engineer-in-Charge.
S&F in repairs battery cable leads of copper conductor single core, multistranded, 25 Sqmm to 35 Sqmm PVC insulated, with copper lugs at both ends and connecting from battery bank to self starter (Apprx. 1.00 m long) complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs battery cable leads of copper conductor single core, multistranded, 50 to 75 Sqmm, PVC insulated, with copper lugs at both ends and connecting from battery bank to self starter (Apprx. 1.00 m long) complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs battery cable leads of copper conductor single core, multistranded, 95 Sqmm, PVC insulated, with copper lugs at both ends and connecting from battery bank to self starter (Apprx. 1.00 m long) complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of alternator of DG Set of capacity 7.5 to 40 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of alternator of DG Set of capacity 55 to 100 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of alternator of DG Set of capacity 125 to 250 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of alternator of DG Set of capacity 400 to 625 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Water pumps of DG Set of capacity 7.5 to 40 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Water pumps of DG Set of capacity 55 to 100 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Water pumps of DG Set of capacity 125 to 250 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Water pumps of DG Set of capacity 400 to 625 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Fan of DG Set of capacity 7.5 to 40 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Fan of DG Set of capacity 55 to 100 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Fan of DG Set of capacity 125 to 250 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs V Belt of Fan of DG Set of capacity 400 to 625 KVA as per existing size complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs of Turbo charger from DG sets of capacity 55 to 100 KVA and carrying out maintenance wks i.e. opening, cleaning and replacement of turbo charger kit ( i.e. shaft, O ring, bearing / bush and nut bolts) clamps hoses including calibration of turbo charger, through authorised agency / work shop by OEM and refixing Turbo charger in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repairs of Turbo charger from DG sets of capacity 125 to 250 KVA and carrying out maintenance wks i.e. opening, cleaning and replacement of turbo charger kit ( i.e. shaft, O ring, bearing / bush and nut bolts) clamps hoses including calibration of turbo charger, through authorised agency / work shop by OEM and refixing Turbo charger in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repairs of Turbo charger from DG sets of capacity 400 to 625 KVA and carrying out maintenance wks i.e. opening, cleaning and replacement of turbo charger kit ( i.e. shaft, O ring, bearing / bush and nut bolts) clamps hoses including calibration of turbo charger, through authorised agency / work shop by OEM and refixing Turbo charger in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repair/Maint of self starter from DG sets of capacity 7.5 to 40 KVA and carrying out maintenence wks i.e. opening, cleaning and replacement of starter winding, turbo bushes and bearings through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repair/Maint of self starter from DG sets of capacity 55 to 100 KVA and carrying out maintenence wks i.e. opening, cleaning and replacement of starter winding, turbo bushes and bearings through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repair/Maint of self starter from DG sets of capacity 125 to 250 KVA and carrying out maintenence wks i.e. opening, cleaning and replacement of starter winding, turbo bushes and bearings through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repair/Maint of self starter from DG sets of capacity 400 to 625 KVA and carrying out maintenence wks i.e. opening, cleaning and replacement of starter winding, turbo bushes and bearings through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
M&L for taking out / dismentling of alternator assembly from DG sets of capacity 7.5 to 40 KVA and carrying out maintenence wks i.e. opening , cleaning, replacement of starter winding, carbon bushes , bearings and diodes through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
M&L for taking out / dismentling of alternator assembly from DG sets of capacity 55 to 100 KVA and carrying out maintenence wks i.e. opening , cleaning, replacement of starter winding, carbon bushes , bearings and diodes through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
M&L for taking out / dismentling of alternator assembly from DG sets of capacity 125 to 250 KVA and carrying out maintenence wks i.e. opening , cleaning, replacement of starter winding, carbon bushes , bearings and diodes through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
M&L for taking out / dismentling of alternator assembly from DG sets of capacity 400 to 625 KVA and carrying out maintenence wks i.e. opening , cleaning, replacement of starter winding, carbon bushes , bearings and diodes through authorised agency / work shop by OEM and refixing self starter in same position after repairs, testing and commissioning, complete all as specified and directed.
S&F in repairs Hinges of door of acoustic enclosure of DG Set of any capacity by removing old hinges and welding new hinges as per existing pattern for smooth opening of door, complete all as specified and directed.
M&L for taking out / desmentling of unserviceable auto mains failures unit from DG set of capacity 7.5 KVA to 40 KVA and replace by new wiring harness via 2 Nos connectors of suitable capacity / specification of existing AMF unit installed at site including complete installation, testing and commissioning wks carried out through authorised agency / work shop, complete all as specified and directed.
All as per ser item No 58.00 here in above but DG Set of capacity 55 to 100 KVA.
All as per ser item No 58.00 here in above but DG Set of capacity 125 to 250 KVA.
All as per ser item No 58.00 here in above but DG Set of capacity 400 to 625 KVA.
S&F in repairs of fuel injector pump from DG Set, transporting to workshop for calibrating and replacement of worn out parts like TD piston,service kit including all types of filter and including filling of new engine oil 15W40 required, compressor spring, cam bush, alternator bush, supplier pump, TR pin bush, and packing kit including pressure setting, connecting to Lathe work and replacing unserviceable AVR complete with control wiring and refixing the same and complete installation, testing and commissioning wks carried out through authorised agency / work shop for the capacity of DG sets 7.5 to 40 KVA, complete all as specified and directed.
All as per ser item No 62.00 here in above but capacity of DG Set 55 to 100 KVA.
All as per ser item No 62.00 here in above but capacity of DG Set 125 to 250 KVA.
All as per ser item No 62.00 here in above but capacity of of DG Set 400 to 625 KVA.
M&L for overhauling of DG set of capacity 62.5 to 250 KVA (Make of Engine: Greaves and Make of Alternator:Stamford) by opening complete engine replacing worn- out / unserviceable parts like connecting rod, piston, piston rings, gear and Pinnion set etc, and reassembling the engine, coupling engine with alternator including alignment and testing and commissioning of DG set complete all as specified and directed by Engr-in-charge. Note:- (i) Engine oil, spares parts will be measured and paid separately as supply only under relevant items of this BOQ. (ii) Cleaning & maintenance of Radiator & Oil cooler will be measured and paid separately under relevant items of this BOQ. (iii) Overhauling shall be carried out by authorised agency by OEM, the contractor shall submit documentary evidence for the same and same shall be defaced by Engineer-in-Charge. (iv) The Quoted rate shall be deemed to be inclusive of engine head grinding, intake and exhaust valve grinding/ seating , testing and calibration of fuel injection pump and injectors. (v) Diesel for testing purpose shall be supplied by the contractor without any extra cost to department.
Supply only following spares parts for the DG set of capacity 62.5 to 250 KVA, complete all as specified and directed Engineer-in-Charge. (Make of Engine: Greaves and Make of Alternator:Stamford)
Piston Set of 4
Piston Ring (comprising oil ring & compression ring) Set of 4
Cylinder liner set of 4
Cylinder liner 'O' ring set of 4
Connection rod Bearing
Upper Gasket
Sump Gasket
Air Filters
B check Filters kit
Radiators hose
Clamps for radiators hose
Cooler Hose
Water Safety Switch
Valve Intake
Valve Exhaust
Valve seat guide (Intake/Exhaust)
Valve Guide
Valve Collet (Locks)
Injector Sleeve
Injectors 'O' ring
Engine top
Head Wall
Connecting Rod
Injector Pipe
M&L for taking out / desmentling / dismounting Accoustic Doors / panel (Top, Left, right), and supply & fix new Accoustic Doors / panel fabricated with CRCA Sheet & FR Acoustic Foam, and Pure Polyester Powder coting on exposed face, including all fitting & fixture, hinges, locking arrangment complete for DG set of any capacity, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs microprocessor based speed control units for DG sets of capacity 7.5 to 40 KVA, including supply, installation, commissioning and testing of of this units at existing site and offer precise (+/- 0.25%) speed control with fast response to transient load changes in isochronous, Droop & Variable Operation, Starting Fuel & Speed Ramping Adjustument, Soft Coupling, Lead Circuit Auxiliary Input & 10V Supply Overspeed Contact, complete all as specified and directed. (Note- The item should be made Governers america Cop or equvallent approved by GE.)
All as ser item No 69.00 here in above but DG Set capacity of 55 to 100 KVA.
All as ser item No 69.00 here in above but DG Set capacity of 125 to 250 KVA.
All as ser item No 69.00 here in above but DG Set capacity of 400 to 625 KVA.
S&F in repairs Magnetic Pick up Mpu set for DG set of capacity 7.5 to 40 KVA having resistance value 300 ohms max, Temperature range in between -55 Degree celsius to 105 Degree celsius, made of metal material, with ideal output of 1.5 volts AC main and Max output 30 voltage AC, complete all as specified and directed. (Note- The item should be made Governers america Cop or equvallent approved by GE.)
All as ser item No 73.00 here in above but DG Set capacity of 55 to 100 KVA.
All as ser item No 73.00 here in above but DG Set capacity of 125 to 250 KVA.
All as ser item No 73.00 here in above but DG Set capacity of 400 to 625 KVA.
S&F in repairs Microprocessor based Automatic Mains Failure Controller, for AMF panel of DG set of capacity 55 to 100 KVA, comprising following alarms through LED / LCD (a) Mains fail, (b) LLOP (c) High cylinder / water temperature, (d) Over speed, (e) Under speed, (f) Alternator fault, (g) DG fail to start, (h) DG fail to stop, (i) Overload, (j) Fuel low, (k) Fuel very low (for stopping of engine), (l) Battery Voltage low, (m) DG fault (common for any DG fault), (n) Canopy door open, (o) Fire Alarm, (p) Canopy temperature high, (q) Low water level (for water cooled sets), (r) Over / Under voltage, (s) Over / Under frequency, fixed in position in AMF panel and connecting with copper conductor cable & lugs, complete all as specified & directed by Engineer-in-Charge.
All as per Ser Item No 77.00 here in above but AMF panel of DG set of capacity 125 to 250 KVA and ditto.
All as per Ser Item No 77.00 here in above but AMF panel of DG set of capacity 400 to 625 KVA and ditto.
S&F in reapirs Automatic voltage regulation (AVR) of capacity 7.5 to 40 KVA, complete all as specified and directed.
S&F in reapirs Automatic voltage regulation (AVR) of capacity 55 to 100 KVA, complete all as specified and directed.
S&F in reapirs Automatic voltage regulation (AVR) of capacity125 to 250KVA, complete all as specified and directed.
S&F in repairs of contactor 3 phase, 440 volt, of capacity 100/110 Amp, complete all as specified and directed.
S&F in repairs of contactor 3 phase, 440 volt, of capacity 200 to 250 Amp, complete all as specified and directed.
S&F in repairs of contactor 3 phase, 440 volt, of capacity 300 to 400 Amp, complete all as specified and directed.
S&F 50mm bore dia Steel water tubing, light grade, galvanized with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable complete including taking down old pipe, complete all as specified and directed .
S&F in repairs 0.50 mm thick Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or roof, fixed with self tapping / drilling screws, complete all as specified and directed.
S&F in repairs X Cell POWER PACK (Genset Starting Unit), comprising 2 Nos pure lead tin Maintenance Free Valve Regulated (MF-VRLA) Battery, 12V - 80Ah, and built in Constant Voltage (SMPS) charger having output 24 Volt, Amps with, AC under & Over Voltage protection, Output Short Circuit protection, Overload protection, Output over voltage protection and High Temperature protection, fxed in position and connecting, including taking down old power pack and deposit in the storyard of AGE E&M, complete all as specified and directed by Engr-in-charge.
S&F in repairs Lead acid Battery, Maintenance free, high charge characteristic having battery capacity 90 AH, 12 V, filled and factory charged for Diesel Generator Set of any capacity, including taking down old battery and deposit in the storyard of AGE E&M ,complete all as specified and directed by Engr-in-charge. Make :- Exide Model No.- Exide Genplus (GP110D31L) or Equivalent model No of Make Okaya, Luminous Note- Contractor shall submit 2 year manufacturer warrantee to Engineer-in-Charge.
S&F in repairs Lead acid Battery, Maintenance free, high charge characteristic having battery capacity 130 AH, 12 V, filled and factory charged for Diesel Generator Set of any capacity, including taking down old battery and deposit in the storyard of AGE E&M complete all as specified and directed by Engr-in-charge. Make :- Exide FIO0-INVAMORE1300 or Equivalent model No of Make Okaya, Luminous Note- Contractor shall submit 2 year manufacturer warrantee to Engineer-in-Charge.
S&F in repairs Lead acid Battery, Maintenance free, high charge characteristic having battery capacity 180 AH, 12 V, filled and factory charged for Diesel Generator Set of any capacity, including taking down old battery and deposit in the storyard of AGE E&M complete all as specified and directed by Engr-in-charge. Make :- Exide Inva plus FIMOMI-1800 or Equivalent model No of Make Okaya, Luminous Note- Contractor shall submit 2 year manufacturer warrantee to Engineer-in-Charge.
S&F in repairs damage / wornout old exhaust manifold for DG set of capacity upto 500 KVA including painting and insulation with asbestos rope, complete all as spd and directed by Engr-in charge.
Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 92,940.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)
M/s Bilal Construction (BID ID -3398684)
M/S ASHRAF CONSTRUCTIONS (BID ID -3399324)
M/S UTA MOTORS (BID ID -3398314)
M/S A.R TANTRAY (BID ID -3399213)
M/S M.Y Enterprises (BID ID -3406288)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .