Upgradation of Girls Hostel Building Old Block of Govt. Degree College Kathua.

Amount

Dismantling old plaster or skirting, raking out joints & cleaning the surface for plaster including disposal of rubbish to the dumping ground with all leads & lifts.

Dismantling doors, windows and clerestory windows of area 3 sqm and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking ,all leads & lifts.

Demolishing brick work in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material incl. all leads and lifts as per direction of Engineer-in-charge

Demolishing cement concrete 1 1:3:6 or richer mix (i/c equivalent design mix) manually/by mechanical means including disposal of material incl. all leads and lifts as per direction of Engineer-incharge

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material incl. lead and lifts as per direction of Engineer-in-charge.

Taking out doors, windows,windows and clerestory window shutters (steel or wood) of area of 3 square metres and below including stacking of material, all leads and lifts.

Earth work excavation in all kind of soil by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 m in width) & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, incl. disposal/filling of excavated earth ,all leads & lifts complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts & carriage of material by MT / H.L.- All work upto plinth level.1 : 5 : 10 ( 1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size) .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)incl. all leads, lifts & carriage of material by MT/ H.L

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Providing & laying in position specified grade of cement concrete excl.the cost of centring, shuttering, finishing & reinforcement-All work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size) incl all leads, lifts and carriage of material by MT / H.L.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Providing and laying in position cement concrete of specified grade 1:1.5:3 (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level including all leads, lifts and carriage of material by MT / H.L.

Reinforcement for RCC work including raightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars /Cold twisted bars including all leads, lifts and carriage of material by MT / H.L.

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platforms.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (By manual means) incl. all leads, lifts and carriage of material by M.T. H.L.

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 ( 1 cement :4 coarse sand) incl all leads, lifts and carriage of material by MT / H.L.

Extra for half brick masonry in superstructure above plinth level upto floor V level incl. all leads, lifts and carriage of material by M.T. H.L.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete

Fencing with G.I. barbed wire angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used.

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) incl. all leads, lifts & carriage of material by MT / H.L.

15mm cement plaster on rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) incl. all leads, lifts and carriage of material by MT / H.L.

Making plinth protection 50 mm thick of cement concrete 1:3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed & consolidated & grouted with fine sand incl. finishing the top smooth. Crushed aggregate incl.all leads, lifts & carriage of material by MT/H.L.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape ranking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excl. portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 35 mm thick wire gauge shutters of 2nd class deodar wood using Galvanised M.S. wire gauze of average width for aperture 1.4 mm with wire of dia 0.63 mm for doors, windows and clerestory windows incl. ISI marked bright finished or/ and black enamelled M.S. butt hinges with necessary screws.

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing cupboard shutters with 25 mm thick veneered particle board IS: 3097 marked exterior grade (Grade I) of approved marked including second class teak wood liping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of engineer-in-charge. With decroative veneering on one side and commercial veneering on other side.

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles 125 mm ISI marked (anodised anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium sliding door bolts 300 x 16 mm ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper

Renewing glass panes, with wooden fillets wherever necessary Glass panes weighing 10 kg / sqm

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing Ceramic glazed floor tiles 300 x 300 mm (thickness) to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (1 cement :4 coarse sand) including ;pointing the joints with white cement and matching pigment etc. complete including all leads, lifts and carriage of material by MT / H.L.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours & shades, laid on 20 mm thick cement mortar 1 : 4 (1 cement : 4 coarse sand) incl. grouting the joints with white cement & matching pigments etc. complete size of tile 60 cm x 60 cm incl all leads, lifts & carriage of material by MT / H.L.

Providing and fixing 16 mm thick gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen plateform,vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curring moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shape(Area of slab upto 0.50 sqm)

Extra for providing edge molding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in -Charge. for granite work

25 mm thick Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level P.V.C. flushing cistern incl. flush pipe pipe ( of approved make ) manually controlled device (handle lever) conforming to IS:7231,with all fittings and fixtures complete, including, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing & fixing wash basin White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I/M.S. brackets,15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, incl. painting of fittings & brackets, cutting & making good the walls wherever required:

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Hindware/Cera/Parryware or eqivalvalent make)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting & making good the walls etc.Internal Work-Exposed on wall.

25 mm dia nominal bore Medium

20 mm dia nominal bore Medium

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 complete job.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 complete job.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms complete job.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 32 mm dia

Providing and fixing uplasticized PVC connection pipe with brass unions30 cm length 15 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank I:S:I: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank {Sintex, Elecroplast, Star, Lotus or equivalent having valid I : S: I license}

Providing and fixing PVC Floor trap of approved quality.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with1:2:4 mix ( 1 cement :2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement 4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating coat of neat cement & making channels in cement concrete 1:2:4 ( 1 cement : 2 coasre sand :4 graded stone aggragate 20mm nominal size ) finished with a floating coat of neat cement complete as per standard design. Inside size 90 x 80 cm & 45cm deep including providing and fixing in position precast RCC manhole cover & frame of required shape and approved quanlity LD-2.5 rectangular shape 600x450 mm internal dimensions . With F.P.S bricks with class designation 75 & with crushed stone aggregate including all leads, lifts & carriage of material by MT / H.L.

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design

Providing and fixing ball valve (brass) of approved quality complete, high or low pressure with plastic floats 20 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes

110 mm diametre

75 mm diametre

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In granting, frames, guard bar, ladders railing, brackets, gates & similar works.

Providing and fixing powder coated sheet 4 mm thick of approved quality for making shed including nails,screws,washers etc.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even & smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with acrylic emulsion paint of approved brand & manufacture to give an even shade. Two or more coats on new work

Finishing wall with water proofing cement paint of required shade - New work (two or More coats) applied @ 3.84 kg/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.One or more coats on old work.

Providing & fixing aluminum work for doors, windows, ventilators & partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size incl. necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)

For fixed portion powder coated aluminum (minimum thickness of powder coated 50 microns)

For fixed portion anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing & fixing aluminum work for doors, windows, ventilators & partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size incl.necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilators shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.( Cost. Of aluminum snap beading shall be paid in basic item) With floating glass panes of 4.0 mm thickness ( weight not less than 10.00 kg/sqm)

Providing and fixing ACP sheet panelling 4.0 mm thick in Partition/doors of approved quality as per the direction of Engineer- in - Charge (Complete job)

Providing and fixing 100 mm brass locks (best make of approved quality)for aluminium doors including necessary cutting and making good etc complete.

Providing and fixing double action hydraulic floor spring with Stainless Steel cover plate minimum 1.25 mm thickness of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floorfinishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Labour charges for carpenter/welder/plumber or equilvalent type (per day).

TARSEM CHAND

VIJAY KUMAR

Mahmood Khan Govt. Contractor

M/S GARIB PERVER DUTT

Pawan Kumar Gupta

PAWAN KUMAR

Dheeraj Gupta

8 BOUNDARIES BUILDERS PVT LTD

M/S RAGHUBIR SINGH