Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 CrAccepted-Finance | ₹5.0 Cr | L1 | Accepted-Finance L1 |
| 2 | L2₹5.4 Cr+₹48.2 L (9.73%)Rejected-Finance | ₹5.4 Cr+₹48.2 L (9.73%) | L2 | Rejected-Finance L2 |
| 3 | L3₹5.9 Cr+₹90.1 L (18.2%)Rejected-Finance | ₹5.9 Cr+₹90.1 L (18.2%) | L3 | Rejected-Finance L3 |
| 4 | L4₹5.9 Cr+₹97.1 L (19.6%)Rejected-Finance | ₹5.9 Cr+₹97.1 L (19.6%) | L4 | Rejected-Finance L4 |
| 5 | L5₹6.5 Cr+₹1.6 Cr (31.7%)Rejected-Finance | ₹6.5 Cr+₹1.6 Cr (31.7%) | L5 | Rejected-Finance L5 |
Tender Value
₹3.5 Cr
EMD Value
₹50,000
Closing Date
27 Apr 2021, 5:00 pmClosed
Executive Engineer
Jal Shakti Division No 1 Kasumpti Shimla
portable rigs 80 mtrs. deep during the year 2021-22)
2021_HPIPH_46001_1
Shimla/Kasumpti/HandPump
Open Tender
Miscellaneous Works
Item Rate
365 days
Shimla
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,500
EE Jal Shakti Div No 1
₹50,000
Yes
3 Jun 2025
26 Mar 2021
28 Apr 2021
26 Mar 2021
27 Apr 2021
26 Mar 2021
Amount
Providing and Installation of India Mark-III (65mm),India Mark II (50mm) & India Mark-II extra deep (32 mm) deepwell hand pumps as per IS: 13056-1991 along with its upto date amendments and IS: 9301 respectively comprising of following items:-
Transportation of suitable truck mounted DTH & ODEX / Percussion Calyx / RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in-Charge
Non Tribal Area
Tribal Area
Drilling bores of 165 mm dia as per IS : 2800-1979, using DTH from ground level in the overburden as per directions of the Engineer-in-charge / Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sand stone, lime stone, dolomites,conglomerate, silt , clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachments, consumable stores, bits, water, POL etc. complete in all respects as detailed below:-
Non Tribal Area
(i) From 0 m to 10 m depth.
(ii) Above 10 m.
Tribal Area
(i) From 0 m to 10 m depth.
(ii) Above 10 m.
Drilling bores of 152 mm dia as per IS: 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate boulder, pebble, gravals, silt , clay etc. including cost of attachments consumable stores bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore 5.00 mm thick MSERW fincut casing pipe which will be welded together using 2.50 mm or 3.25 mm dia. Advani Oerlikon electrodes with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately.
Non Tribal Area
Tribal Area
Drilling bores of 200 mm dia as per IS : 2800 -1979 using percussion / Calyx / RC / ODEX method required for drilling in collapsible strata conglomerate, boulders, pebbles, sand, gravals, silt, clay etc. including cost of attachments, extractable casings, consumable stores, bits, water, POL gravel pack in annular space etc. complete in all respects as per directions of Engineer-in-Charge.
Non Tribal Area
Tribal Area
Drilling bores of 115 mm dia as per IS : 2800 - 1979 from bottom of bore hole to required depth by DTH method in conglomerate and rocky formations complete in all respects as per directions of the Engineer-in-Charge / Hydrogeologist.
Non Tribal Area
Tribal Area
Supplying and lowering of IS Marked 125 mm dia PVC casing pipe medium class 5 mm thick screwed and socketed as per IS : 12818 - 1992 (Part-I) with up to date amendment including cost of all cutting, factory threadings wherever required in random lengths of 6.00 meters including transportation charges. (For DTH bores) complete in all respect as per direction of Engineer-in-Charge.
Non Tribal Area
Tribal Area
Supplying and lowering of IS Marked 125 mm N.B. 5 mm thick fincut MSERW casing pipes as per IS : 4270 - 2001 and requirement of ODEX attachment from approved manufacturers complete in all respects as per directions of Engineer-in-Charge.
Non Tribal Area
Tribal Area
Supplying and lowering of IS Marked 175 mm N.B. 6 mm thick fincut MSERW casing plain and casing MSERW pipes as per IS: 4270-2001 with upto date ammendments in a length of 3.00 meters including cutting, welding, transportation charges complete in all respects as per directions of Engineer-in-Charge. The pipe shall be slotted at a suitable interval.
Non Tribal Area
Tribal Area
Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directionss of Engineer-in-Charge.
Non Tribal Area
Tribal Area
Collection and preservation of soil samples in polythene bags after every 1 mtr.complete in all respects as per directions of Engineer-in-Charge.
Non Tribal Area.
Tribal Area
Development of borewell and yield testing with air - compressor through V notch and disinfection etc. complete in all respects as per IS : 2800 - 1979 and as per directions of Engineer-in-Charge.
Non Tribal Area
Tribal Area
Supplying and lowering of IS marked riser pipes, medium class screwed and socketed and welded as per IS : 1239 - (Part - I) with upto date amendments, electric resistance welded including cost of all cuttings, threadings and welding, wherever required, in random lengths of 3.00 meters inclusive of transportation charges to the site complete in all respects as per directions of Engineer-in-Charge. The seamless sockets shall be provided as per IS : 13056 -1991.
(I) 65 mm dia GMS pipes
Non Tribal Area
Tribal Area
(II) 32 mm dia GMS pipes
Non Tribal Area
Tribal Area
(I) Supplying and erection of IS marked India Mark-III deepwell hand pumps (65 mm) conforming to IS : 13056 - 1991 consiting of pump head assembly, cylinder assembly and seven connecting rods complete in all respect for installation up to 40 meters depth as per directions of Engineer-in-Charge.
Non Tribal Area
Tribal Area
(II) Supplying & erection of IS marked India Mark-II extra deepwell hand pump (32 mm) conforming to IS : 9301 consiting of pump head assembly, cylinder assembly and seven connecting rods complete in all respect for installation beyound 40 meters as per directions of Engineer-in-Charge.
Non Tribal Area
Tribal Area
Providing and fixing of extra connecting rods up to 3.00 meters length in hand pumps as per site conditions complete in all respect as per directions of Engineer-in-Charge.
Non Tribal Area
Tribal Area
C/O Platform / Khura with providing and laying cement concrete 1:2:4 (1cement : 2 sand : 4 graded stone aggregate, 20 mm nominal size) as per standard drawing including cost of earth work in founadation, form work, curing complete in all respects in all leads and lifts and as per directions and entire satisfaction of Engineer-in-Charge .
Non Tribal Area
Tribal Area
Shri Ganesh Drilling Co
Shanti constructions and builders
OM BORE WELLS
Shri Ganga Drilling Co.
Shiv Drillers
RAMESHWAR SHARMA
Shankar Borewells and Engineers
sri darshan enterprises
M/S Sidharth Bore Well
Savita Boring Co.
M/S Ganga Tube Wells
Depanshi Infra
M/S Naina Boring Company
Vats Associates
M/S Hari Om Drillers
Himalyaboring compay
M/S Him Ganga Boring
M/S Sharma Enterpirses
Saini Boaring
Expert Drillers
sunandhard
Desh Raj Sharma
Chauhan Borewell
R B SALES (INDIA)
Tremend Drillco Pvt. Ltd.
shivalik borewell
stage.html
html • 0.11 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .