Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance 00 BARGO BARGO SENDULI BENDULI GORAKHPUR UTTAR PRADESH 273016 | GORAKHPUR | UTTAR PRADESH | 273016 | Admitted-Finance |
| 4 | Admitted-Finance PLOT NUMBER 286 INDUSTRIAL AREA PHASE 2 CHANDIGARH | CHANDIGARH | CHANDIGARH | CHANDIGARH | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹82.5 L
EMD Value
₹1.6 L
Closing Date
9 Jul 2024, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chairman GB
3rd floor VS Bhavan Mumbai
Building Work/ Building maintenance work/ Building Renovation work etc
2024_DCSEM_812897_1
DCSEM/CQD/QSB/24-25/NIT/09 dt.21.06.2024
Open Tender
Civil Works - Buildings
Item Rate
183 days
Anushaktinagar, Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹0
₹1.6 L
2 Aug 2024
21 Jun 2024
10 Jul 2024
21 Jun 2024
9 Jul 2024
21 Jun 2024
21 Jun 2024 - 24 Jun 2024
Amount
ABSTRACT SHEET
PART I : CIVIL WORKS
PART II : REBATE ITEMS
Description of Work / Item(s)
Amount
PART II - CIVIL WORKS
Mirror polishing for existing kotah/mosaic flooring and skirting at all floors & locations using polishing machine to give high gloss finish, including disposal of debris etc. complete all as per specification and as directed by the EIC
Plain Cement concrete of Mix 1:2:4 of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete all as per specifications, drawings & as directed by the Engineer in Charge. Note: Nominal reinforcement if provided shall be measured & paid under relevant item.
Brick masonry work in foundation ,brick sitting, bench, stool (curved or any geometrical shape) ,plinth, cable pits, trench, steps, storm water drain, footpath etc. at all locations using well burnt bricks from approved lot, of class designation 3.5 (classification as per IS1077-1992 and min. average compression strength not less than 3.5 N/mm2 ) in C.M 1: 6 to correct line, level and plumb including raking out joints / simultaneous flush pointing with cement mortar 1:4, curing etc. Complete asper specifications, drawings and as directed by Engineer in charge.
Sand faced external/ internal cement plaster as specified below in Ready MIx Mortar 1:4 at all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line, level and plumb, curing including making grooves, vatas, plaster fluting (plaster in steps) etc. where ever required complete as per specification and drawings and as directed by the Engineer in Charge.
20 mm thick in two coats
12 mm thick in single coat
Providing & laying machine cut & machine mirror polished kotah stone on sitting steps in single piece, facia, tree guard top,flooring,steps, riser etc including necessary cement mortar bedding / backing, close jointed & grouted with matching cement slurry and finished to line, level, curing etc. as required, including cutting of stone slab, wastage, making cut-outs wherever required, including removing of existing damaged one etc. complete all as per specifications, drawings and as directed by the Engineer in charge.a) On sitting steps, tree guard ,steps etc of required length ,shape and 25mm thick laid over & including 20mm. thick cement mortar 1:4 ( I cement : 4coarse sand) bedding. b) In Facia,Riser,skirting, including 20 mm thick or sizes as per working drawing laid over and including 12mm thick cement mortar 1:3 ( I cement : 3coarse sand) backing including providing grooves if necessary chasing the brick masonry etc. Complete.
Structural steel work in frames, covers, using angles, tees, flats, bars , chequered plates, inserts fabricated out of mild steel bars, ISMC,ISMB, ,angles, pipes , plates and diaphragm plates for expansion joints etc. of all shapes, sizes including supplying, cutting, fabricating, welding, erecting, making holes/chases wherever required and fixing/embedding in position in concrete/brick work with necessary hold fasts/ screws & rawl plugs and finishing the concrete/ brick work after fixing /embedding including painting two coats of anticorrosive bitumastic paint on all unexposed surfaces and two coats of synthetic enamel paint of approved make and colour on all exposed surfaces over a coat of approved steel primer etc. complete as per specifications, drawings and as directed by the Engineer in charge.
Painting plastered / concrete surfaces with two coats of exterior grade acrylic emulsion paint of approved colour and shade over a coat of approved cement primer including all as per manufacturer's recommendations and as per the approved sample including providing necessaryscaffolding,cleaning the surface with water to remove all coating, dust, filling up cracks &crevices with approved putty, curing the surface etc. complete as per specifications and as directed by Engineer in Charge
Painting over the existing/ old structural steel frame, cover ,fencing etc. with two coats of synthetic enamel paint in black/gold/other approved colour of approved make over a coat of approved steel primer etc complete as per specification, drawings and as directed by EIC
Providing & fixing stainless steel pipe hand rail in circular / Square / Rectangular/ any other approved shape & size for support & safety of skate learners, at Staircase, lobby, at all floors & levels conforming to 310 Grade of steel,of Schedule 10-S, All as per pattern &design shown in drawing including necessary S.S bend,tees, welding / nut-bolt necessary anchoring polishing and fixing in concrete/brick wall with S.S lugs, making pockets,concreting, making good the surfaces etc. as per specifications drawings and as directed by the E-I-C.
Supplying, fabricating and fixing in position at all floors Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivet joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufactures for following types with extruded sections of Jindal / Hindal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters (including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC.
Painting of surfaces with two coats of premium quality acrylic emulsion paint of approved make & shade over two coats of approved primer consist of thoroughly scrapping, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound, applying approved stucco putty to entire surface to fill up crevices, mild depression etc. including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris within colony etc. complete all as directed by the Engineer-in-Charge.
Providing, applying and finishing with French spirit polish over old / new, wooden surface, at all floors, levels & location using two or more coats of French spirit polish over a coat of wood filler to form uniform neat finish, of approved make, shade and pattern including labour, material, scaffolding, surface preparation using sand paper & wood filler, cleaning etc complete all as per specifications and as directed by Engineer-in-Charge.
Providing & applying acrylic oil bound distemper in two or more coats on old / new surfaces at all floors, levels & location using ready mixed & ready made acrylic oil bound distemper of approved make and shade including one coat of approved cement primer (water thinkable) including labour, material, scaffolding, surface preparation, cleaning etc complete all as per specifications and as directed by Engineer-in-Charge. (Note:- Acrylic distemper shall have VOC content less than 50 grams/ litre)
On Old Surface ( Including thoroughly scrapping ,removal of old paint, if any, sand papering & preparing the surfaces, applying approved putty for touch up to fill up crevices mild depression etc,necessary covering material (tarpaulin etc.),cleaning ,removal of splashing & droppings of floors, wall, ceiling, doors &disposing of debris as directed by Engineer-in-Charge
Providing & laying at all floors & locations Homogeneous Full body Vitrified tile/ Glazed vitrified tile/ Anti Skid Vitrified tile Vitrified tile double charge/ multi charge (Glossy/Matt/Satin)/ approved manufacturers of sizes 600mm X 600mm / 800mm X 800mm / 1000mm X 1000mm size or as per approved size and having minimum thickness 8.5 mm or as specified by approved manufacturer tiles conforming to IS:15622 having water absorption less than or equal to 0.08% (Group B I a), in flooring/skirting/ dado/ cladding / staircase tread/ riser at all floors and location, heights/ levels and lead in approved pattern and colour, shade laid over cement mortar bedding/ backing/ adhesive backing, including cleaning and preparing the surface for bedding/backing, spreading the neat cement slurry, close jointed and grouted with matching coloured readymade cement grout and approved pigment as per manufacturer's specifications, finished to level, line, slope and plumb, cutting of tiles, wastage, making openings/ cut out if necessary, final cleaning of surfaces, curing etc. all as per drawings, specifications & as directed by Engineer in charge. Note:- The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
In dado / cladding using using Polished Glazed vitrified tile (PGVT) of size 800 mm X 800 mm (and above sizes) laid over 12 mm thick cement mortar 1:4 backing.
Surface dressing & levelling including disposal of excavated material complete all as directed
Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:4 (Using factory made Ready Mix Mortar only), 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, etc. complete all as per specifications, drawings & as directed by the EIC. Note : Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc shall not be measured.
Jet Black Granite Stone
Baroda Green marble Stone
Providing and fixing aluminium grill 10mm thick DECO GRILL make model no DG202 (Red colour) in approved colour anodising of Min 15 micron with a opening size of 60mm X 45mm and minimum weight of 4.282 kg/Sqm including providing and fixing on ventilator windows suitable F & H frame section outer frame and mullion fixing with screw, double tubular necessary scaffolding complete. all as per specification and as directed at site by the Engineer-in-Charge (Aluminium alloy shall be of 6063-T6 with yield strength of 6.5Kg/Sqm)
Providing and fixing following type of approved quality glass panes for doors/windows/ventilators/louvers, of approved manufacturer and fixing with aluminium frame work including fixing aluminium channel beading (to be paid under relevant item) and providing and fixing with 2 way EPDM gasketing , to ensure water and air tightness and neoprene cushions/ gasket accommodated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by the Engineer-in-charge. Note:- Only clear opening of glass shall be measured for payment.
6 mm thick clear float glass
5 mm thick Acrylic sheet of approved colour & shade (For Louvers etc)
Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site,simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscocity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10
a) Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge. Polymer used for this work in KG shall be measured for payment.
Fire Resistant Door (FRD) assembly having 60 minutes (1 hr) Fire rating, Non-Metallic and conforming to IS 3614:2021 (Single / Double lef Shutter) Providing and fixing factory made Fire rated door assembly of galvanised Iron Steel door frame with non metallic single leaf door shutter with accessories, the entire door assembly including shutter, frame and fittings shall be confirming to 60 minutes (1 hr) fire rating as per IS 3614. Frame:- The door frame shall be made of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS:277. The frame shall be of grooved profile of minimum size 145 × 60 mm with inbuilt sealing system to take appropriate fire rated smoke seal. Frame shall be provided with appropriate reinforcement suitable for hardware and flush fixing. Frames shall be provided with stiffener pieces and mitred cut joints (self tab/screwed assembled at site). Fire rated EPDM smoke seal, confirming to IS 3614 : 2021 shall be fixed within the inbuilt groove or stuck with adhesive on the entire perimeter of the frame. Door frames shall be fixed to all round the opening with minimum 8 mm dia CSK headed fastener of minimum 80 mm long with 8mm dia Polyamide sleeves @ 3 Nos at each side. Finishing: Frame to be factory finished with polyester powder coating of minimum thickness of 30 microns (500 hrs salt spray test) of approved colour and shade all complete as per manufacturer’s Specification and direction of the engineer in charge. Door Shutter: The factory made fire resistant non metallic wooden solid minimum 45 mm thick single leaf shutter of size (1000 X 2100 mm), asbestos free with P&F vision panel of size 100 mm X 450 mm with fire rated glass & accessories. Accessories Hardware: Fire door set shall include all accessories like, Fire rated SS 304 grade ball bearing type hinges of minimum size 100 mm ×75 mm × 3 mm one (3 numbers per leaf upto 2100 mm height or as per test evidence), one number fire rated SS mortise lock with handle, fire rated door closer Installation: Post installation hollow space within door frame shall be filled with fire rated self-extinguishing type polyurethane foam. Rate shall include for supply and installation of complete door assembly, by the manufacturer. (All mechanical and functional hardware like hinges, lever handles, door closers with 60 minutes fire rating are to be used on doors and must conform to relevant IS 3614 : 2021. all as per manufacturer's specification and providing Fire Resistant certification (manufacturing & installation) as required by local fire statutory authority shall be furnished by manufacturer of Door assembly (Frame, Shutter, fitting) and all cutting/ planning if necessary, labour for fixing the fittings and fixtures with suitable packing if necessary including providing and fixing 60 minutes (1 hr) fire rated approved shade lamination on both side of shutter (preferably teak wood colour) etc. all complete all as per specifications, drawings & as directed by Engineer in charge.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer of approved make conforming to IS: 3564 with ISI mark including necessary accessories and screws etc for fixing with aluminium/ wooden/ steel doors with necessary bolts & nuts, labour, scaffolding etc complete all as per specifications and as directed by the Engineer-in-charge.
Providing and fixing C.P. teak wood moulded beading 40x20 mm(architrave) size mentioned below around door & window frames at all floors & locations with necessary screws including cost of screws, wastages in cutting, transportation etc. including removing the old damaged beading and disposing the same complete all as directed by the Engineer-in-Charge.
Supplying & fixing 25 mm thick PVC integral foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 1 No. of Aldrop with pad lock provision, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent, including removing existing door shutter & fittings etc complete all as per specification & as directed by the Engineer-in-Charge. Note:- 1) The entire door shall be jointless shutter. 2) The sizes shall be approximately 650 mm x 2000mm, however exact dimensions shall be measured at site before manufacturing.
25 mm thick PVC integral foam sheet in form of flush finish door shutter
10 mm thick PVC integral foam sheet in form of flush finish door shutter
Providing, fixing & Supplying at site of work approved quality and manufacturer, confirmed & marked with relevant IS (wherever applicable), anodised aluminium fittings, fixtures and fastenings along with Stainless steel screws/concealed SS screws, bolts, nuts, washers,wooden packing pieces if necessary etc.and other accessories etc complete all as per specifications and as directed by the Engineer-in-Charge.
Aluminium Tower bolt 100 mm long x 10 mm barrel
Anodised Aluminium handles 125 mm with plate 175 x 32 mm
Fabricating, supplying and fixing mail boxes in cluster, made out of 22 gauge thick sheet of stainless steel 304 grade non-corrosive matt finish of approximate over all size of box 230 mm x 330 mm, depth 55 mm at bottom & 75 mm at top, fitted with open able shutter top hung/ bottom hung with S. S. rebate flap for the letter opening etc. and with superior quality brass cam lock 5 lever (Godrej make or equivalent) with brass duplicate keys, marking flat no. on the front side of each mail box by embossing on SS plate riveted, providing and fixing 20 guage, 3 nos. S.S. Stiffeners inside (one for fixing lock and Two nos. to prevent letters from falling while opening) fixing on the SS angle bracket by making drill hole wherever required & using 4 nos. of S. S. nut & bolts for each letter box as per the standard practice etc., including removing of existing letter boxes, complete all as directed by the Engineer- in- Charge. Note: Sample Shall be got approved before bulk procurement, overall weight of sample approved box will be verified for all others randomly.
Supplying Unskilled labour for attending the complaints of Disposal of surplus earth /debris of all kinds of construction waste materials premises including all lifts, loading, unloading, stacking , spreading, levelling, surrounding cleaning etc. complete as directed by the Engineer-in-charge. (Working hours should be 8.30 Hours with 30 minute lunch break)
a) Supply of Un - Skilled labour
Providing & laying machine cut & machine mirror polished (mirror finish) 18 mm thick Granite stone of black/approved colour at all floor & location in necessary cement mortar bedding /backing of 20 mm thick, close jointed & grouted with matching cement slurry and rounding of edges, finished to line, level , curing etc,as required including cutting of stone slab, wastge,making cut outs, grooves wherever required, machine polishing /hand polishing( where machine can not have access )etc. complete all as per specifications and as directed by the Engineer-in-Charge.
Description of Work / Item(s)
Amount
PART III : REBATE ITEMS
Rebate for taking away dismantled item by the contractor.
Taking out MS letter boxes
Polymer Applicators
AMBIKA ENTERPRISE
MARUTI ENTERPRISES
Om Enterprises
Polymer Applicators
AMBIKA ENTERPRISE
MARUTI ENTERPRISES
Om Enterprises
Polymer Applicators
Avtar Interiors Pvt Ltd
Om Enterprises
MARUTI ENTERPRISES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .