Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹32.6 L+₹57,441.50 (1.79%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED | |
| 3 | L3₹34.7 L+₹2.6 L (8.13%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED | |
| 4 | L4₹34.9 L+₹2.8 L (8.80%)Rejected-AOC OPPOSITE J K BANK BAROO NH1 HAIDERY COMPLEX BAROO KARGIL BAROO KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | L4 | Rejected-AOC HIGHER RATE QUOTED | |
| 5 | L5₹35.4 L+₹3.4 L (10.5%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED |
Tender Value
₹43.0 L
EMD Value
₹85,900
Closing Date
5 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_633165_1
8400-044
Open Tender
Civil Works
Works
180 days
PANAGARH
As per Tender Documents
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹85,900
Yes
17 Jan 2024
16 Dec 2023
6 Jan 2024
16 Dec 2023
5 Jan 2024
30 Dec 2023
Amount
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed
M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM (1:6) all complete all as specified and directed Make : L&T/Lafarge/ACC/Shyam Steel Pvt Ltd
Taking down cement plaster, any description on brick or stone walls and ceiling, chajja, landing etc including racking of joints hacking for key scrubbing down with water etc removing rubbish off the premises complete all as specified and directed
M&L for 15mm thick rendering in CM (1:6) on internal surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound on external surfaces of brick masonry wall finished even and and smooth with out using extra cement (water proofiing item to be paid separately) complete all as specified and directed
Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for completely removal of existing surface and applying two coats of oil bound destemper on wall surface over a coat of alkali resistant primer including prepartion rough surface while scrapping with wall care putty complete all as specified and directed.
M&L for complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Dismantaling Asbestos cement (corrugated, semicorugated) sheet in roof covering complete all as specified and directed.
S&F Pre-painted galvatume aluminum zinc coating AZ-150 GSM GI based fullly/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating AZ-150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges fixed with self tapping screws complete all as specified and directed.
M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), Hand rails, half round or other steel section including embeding in concrete and screwing etc, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ howkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowkat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.
S&F 35mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size c mprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-In-Charge. (Note: stainless steel butt hinges and necessary Stainless Steel screws shall be paid separately)
All as per item No 19.00 but 30mm thick wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, locking arrangement etc all complete as per architectural drawings and the directions of Engr-in-Charge etc complete all as specified and directed.
S&F 4mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 extruded aluminium alloy with alvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 150 mm aluminium extruded handles, fabricated type anodised complete all as specified and directed
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and slidibg bolts of extruded section or cast-aluminium alloy complete all as specified and directed
S&F floor door stopper of aluminum body 140 mm long and tongue with rubber shoes complete all as specified and directed.
Dismantling of wall or ceilling boards of any thicness including cover fillets complete all as specified and directed
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in ceiling in framed work complete all as specified and directed
S&F 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc complete all as specified and directed
S&F Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed
S&F 6mm thick (non asbestos fiber) designer building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and directed
Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for removing rubbish off the premises complete all as specified and directed
M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded coarse aggregate) in flooring with nominal reinforcement complete all as specified and directed. Note: Reinfocement will be measured and paid seperately
M&L for joint free Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement complete in floors, over and including cement screed bed 15mm thick in CM (1:6), including including dismantling wall tiling and cement mortar bedding complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finish complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Chequered cement pre-polished coloured concrete tiles 30cm x 30cm x 25mm thick, with mixture of grey cem,ent and pigment over & including 15 mm thick cement mortar (1:6) screed, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed
M&L for 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed
M&L for 75 mm thick PCC type C-1 1:3:6 (using 20 mm graded stone aggregate) finishing the as in Plinth protection surfaces even and smooth without using extra cement complete all as specified and directed
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed
S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed
M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed
S&F Welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4.0 Kg/Sqm complete all as specified and directed
S&F chicken mesh wire netting 25 gauge 20mm mesh cut to desired length and fixing with nails on the crack portion tightly complete all as specified and directed
Cutting chases, making holes in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed
M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) mixing the concrete with FOSROC chemical nito bond/expoxy as per maunfaturer instructions to a depth up to 75mm on wall lathing, filling the chipped off portion by means of application with pressure and making good the surface even complete all as directed including necessary reinforcement requred ti hold the welded mesh in through and through of walls complete all as specified and directed
M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm cement mortar (1:4) all as specified and directed by Engr-in-Chanrge.
M&L for Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and direded.
S&F Door closer hydraulically regulated, Aluminium (die cast) body designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed
M&L for demolition of Concrete (RCC) of any description and in any position not otherwise specifically provided forand removing rubbish off the presises complete all as specified and directed
M&L for RCC type A1 1:1.5:3 (using 20 mm graded stone aggregate) for chajjas and the like complete all as specifed and directed
Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed
M&L for 5mm thick rendering in CM (1:3) on fiar faces concrete surfaces in ceiling of chajja finished even and smooth without using extra cement complete all as specified and directed
M&L for repairs to crack portion with Jacktting technique, taking down the existing plaster up to brick wall surface of min 200mm wide, cleninng the loose particles on surface of brick work along the length of the crack and filling the gap/crack area with PCC 1:1.5:3 type A0 using 12.5mm aggregate up to brick surface and inserting the welded mesh of size 25X25X2mm dia along the crack on both sides of the wall surface fixed with, drilling holes 10mm dia on either side of the crack by means of drilling mechane trouoght the full width of the wall @ 25cm c/c and insert 8/10mm dia rod in the drilled holes, welded with horizonal rod to with hold the welded mesh and applying grit plaster 1:1:2 using 4mm and down aggregate finished even and smooth with out using extra cement complete all as specified and directed Note: Reinforcement and welded mesh will be measured and paid seperately.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggrgate) as in walls or retaining walls, butress of any thickness, size or shape including pilasters, buttress columns, pillars, boundary pillars and posts (including caps and bases) incl necessary form wok complete all as specified and directed by Engr-in-Charge
S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and directed.
S&F Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and directed.
All as per item No 61.00 mentioned above but 8mm dia in stirrups complete all as specifed and directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specifed and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc. in soft / loose soil complete all as specifed and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specifed and directed
M&L for RCC (M-25) using 20mm graded stone aggregate, design mix in foundations, footings, foundation beams,plinth beams,bases of columns and mass concrete complete all as specifed and directed.
M&L for RCC (M-25) using 20mm graded stone aggregate, design mix in columns,pillers,piers,post and struts complete all as specifed and directed.
M&L for (M-25) using 20mm graded stone aggregate, design mix in in Beams, cantilevers, lintels over 1.5m span complete all as specifed and directed.
M&L for formwork to sides concrete foundations , bases of coumns , sides and soffits (if any) of foundation and plinth beams, and similar work complete all as specifed and directed.
M&L for formwork to sides piller post ,struts, and columns and similar work complete all as specifed and directed.
M&L for formwork to sides and soffits of lintel / lintel band for flat and rough finished surface of concrete complete all as specifed and directed.
M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work using water proofing compound complete all as specifed and directed.. Note: Water proofing compound will be measured and paid seperately
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash on walls as specified and directed.
M&L for moorum filling in floors or pavements, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specifed and directed
M&L for broken stone hardcore of guage n. exc 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specifed and directed
M&L for 25mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) to receive tiles complete all as specifed and directed.
M&L for Kota stone slab 20-22 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L for framed work such as grills, grating, etc, with ends of bars shouldered and or riveted or forged into spike framed guard bars for windows and iron gate conforming to Fe 410-0 or Fe 310-0 complete all as specifed and directed..
S&F MS flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specifed and directed..
M&L for PCC(1:3:6) type C1(using 20 mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork complete all as specifed and directed..
Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm in soft loose soil complete all as specifed and directed
Removing excavated soil n. exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and directed
M&L for Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil complete all as specifed and directed
M&L for 200 mm thick Kankar or laterite, (mix of fly ash, clinker and stone dust in proprtion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust) spread, rolled and consolidated to gradient and camber required complete all as specifed and directed
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base and finishing the surface fiar and even complete all as specifed and directed..
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specifed and directed
M&L for Machine pressed precast pre-polished coloures concrete interlocking paver block any shape and size confirming to IS 15658-2006 with mixture of grey cement and pigment of 60 mm thickness, M-35 Grade complete all as specifed and directed.
M&L for PCC 1:2:4 type B1 using 20mm garded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specifed and directed..
E/M PORTION Taking down carefully aluminium conductor point wiring (light, fan, socket or powr) complete including fittings such as switches, ceiling rose, pendents, regulators sockets etc and removing (except those to be reused shall be kept in safe custody at the site) andmaking good disturbed surfaces of walls, floors etc tomatch with the existing completeall as specified and directed.
Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 90.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.
All as per item No 90.00 above but 5 Amp socket on same board with other switches complete all as specified and directed
Material and labour wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLH cable earth wire and connecting to earth dolly and brass screws, washers etc.complete all as specified and directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed
S&F socket outlets 2 in 1, 5 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed
S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified and directed
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed
S&F stepped type electronic fan regulator flush type 240 Volts, 100 watt ISI marked complete all as specified and directed
S&F submain two single core 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)
S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)
S&F LED security light fittings 35 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified and directed.
S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative box type 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed.
S&F recessed mounted 2' x 2' LED lminaire 36 watt for grid ceiling minimum lumen output 100 lumen/watt pre-treated CRCA frame powder coated with difused profied including necessary connection complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed
S&F epoxy powder coated sheet metal enclosure for TPN DBs, 4 ways, double with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, IP-43 complete all as specified and directed
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 8 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed
S&F MCB TPN 40-100 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed
S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
S&F in repair 'D' clamp of strip size 25x6 mm with suitable washer,nuts, bolts in any shape or size as indicated or directed including making hook for hanging ceiling fan and inclusive of one primer coat ,one under coat, one finish coat of paint complete for hanging of ceiling fan all as specified and as directed.
Taking down old unserviceable ceiling fan carefully from ceiling and deposite to E/M store yard complete all as specified and directed.
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor , 1100 vlts grade , crsectional area 35 sqmm 3½ core including taking down complete all as specified and directed Note:Excavation, sand cushioning, brick will be measured and paid separtely.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F as in repair Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
Labour only for horizantal boring for passing protection pipe upto 80 mm bore (dia) under road / flor path not exc 10 Mtr in a single lengh completer all as specified and as directed (Note: Pipe to be measured and paid separately)
S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor , 1100 vlts grade , crsectional area 16 sqmm 2 core complete all as specified and directed Note: Excavation,sand cushioning,brick will be measured and paid separtely.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
RUBY BUILDERS AND CONSTRUCTION CO
M/S N B SEN CONSTURCTION
M/S Ali Trading Co
M/S SWAPAN KUMAR MONDAL
KAZI SAHABUL ALAM
NATIONAL CONSTRUCTION CO
SAIBABA ENTERPRISE
subash chander bahl
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .