CERTAIN REPAIR TO WALL PLASTER PROTECTIVE WORK AND DRAINAGE UNDER AOR OF AGE BR DETT A NAUSHERA OF GE 862 EWS

Amount

Demolition of brick work / stone masonary built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints,hacking for key,scrubbing down with water etc, all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling wrought iron or mild steel of any description not otherswise provide for , etc complete all as specified and as directed.

Dismantling barbed wire fencing of any description complete all as specified and directed.

Dismantling of Stone slabs . tiles and interlocking paver block ( Laid dry or laid dry and pointed) of any description or thickness infloors, aprons etc, complete all as specified and directed.

Demolition cement concrete below or above ground level n. exc 15 cm thickness (unreinforced ) all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and wall ramming in layers n.exc 25cm as in soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete, all as specified and directed.

M & L for brick work with sub class 'B' bricks in straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. (Note: (Work may involves head load , No extra cost shall be borne by Govt Exchequer in r/o labour involved in this regard and if any sort of clearence from bushes is required)

All as per item No 12 here-in-before but except bricks, complete all as specified and directed.

M&L stone walling of random rubble uncoursed well bonded bedded and solidly hearted in CM 1:6 complete all as specified .

All as per item No 14 here-in-before but except stone, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded aggregate for columns pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded aggregate for beams, cantilever, lintel over 1.5m span complete all as specified and directed.

Use and Waste for formwork of concrete foundation, footings , bases of coloumns , raft and rafts beams , sides soffits (if any) foundation and plinth beams and similar works for ruough finished of flate concrete surface. etc complete all as specified and directed.

Use and Waste for formwork to sides and soffits of floor or roof beams beam haunching, lintel, cantilever etc complete all as specified and directed.

Use and Waste for formwork to sides of piller s, posts, struts, piers, coloumns, fair finished of surface concrete, square/rectangur etc complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

same as item no 22 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

S&F Mild steel work in framed work such as in doors or gates grills, gratings,framed guard bars,ladders etc with ends of bars shouldered and/or riveted or forged into spikes and similar work confirming to Fe-410-O as in framed and hung gates including pintle hinges, stops, hand made sliding bolts etc and similar work confirming to Fe-410-W complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:4 on brick or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed. (Note : Work involves head load , No extra cost shall be borne by Govt Exchequer in r/o labour involved in this regard and if any sort of clearence from bushes is required)

M&L for rendering 20mm thick in cm 1:4 on stone masonry external surfces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in , bed blocks of hold fasts, copings, kneelers, apex stones,bed plates, PCC cill ,water troughs and the like including weathering, slightly rounded or chamfered angles, projected and throating, as directed Not :Proper form work shall be made by the bidder and quoted rate shall be deemed to be inclusive of this.

S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessary drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165, complete all as specified and directed. (Note : Work involves head load , No extra cost shall be borne by Govt Exchequer in r/o labour involved in this regard and if any sort of clearence from bushes is required)

Fixing only mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing barbed wire) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F in Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing any type of standard rails straining bolts incl securing or tying at crossing with and provn of Galvanised MS wire, staples or steel pins, as directed (each line wire to be measured) complete all as specified and directed.

S&F in repair Punched tape concertina coil 600/900mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

M&L 75m m thick PCC (1:4:8) type D-2 using 40mm stone coarse aggregate as in sub base of flooring and path, etc complete all as specified and directed.

M&L for prepolished coloured chequered cement concrete tiles size 300mmX300mmX25mm thick , set , jointed and pointed in neat cement slurry and pointed in white of coloured cement to match the shade of tiles over & including 15mm thick screed bed and bedding layer CM (1:4) complete, all as specified and as directed.

M&L for prepoliished machine pressed precast concrete interlocking paver block coloured of any shape ( I- Section/Zig Zag/ Fan Pattern ) and size approved by EIC , ISI marked (IS:15658-2006) , 80mm thick M-40 grade (Heavy traffic ), in paths and hardstanding, liad tightly with grey cement and no pigment , complete all as specified and as directed.

All as per item No 34 here-in-before but except paver block, complete all as specified and directed. Note: (Old paver block obtained from item ser No 6 shall be reused)

M&L for providing, cement concrete 1:2:4 type B1 (20 mm graded aggregate) in edge of paver block , rounded or chemferred on edges, complete all as directed.

M&L 25 mm thick sand cushion bed for paver block etc complete all as specified and directed.

S&F for Polythene film, black, 50micron laid in sub base complete all as specified and directed.

M&L for flexural desing mix cement concrete work in pavement/hardstandings of min flexural strength 40kg/per sqcm in field using 400kg (min) of cement per cum , thickness of concrete 25cm or less all as specified and directed. Note : Batching plant or self loading concrete mixture ( SLM) Shall be arrange by the contractor with out any Extra cost.

M&L for forming 12mm thick expansion joints filled with preformed bitumenous filler and top 30mm prmed and sealed with compound grade-A thickness of concrete slab 150mm including providing 20mm dia mild steel dowel bars 50cm long 25cm in each slab ) with ferrules, spaced at 300mm centers, including boring formwork and performed filler for dowels complete all as specified and directed.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complound grade 'B' complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep X10mm wide , filled with sealing complound grade 'B' complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Exterior Emulsion paint Ist quality (APEX ultima from asian, luxury from berger, excel from nerolac or equivalent ) on external surfaces in multy colour patern as approved by Engr - in - Charge, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint on external surfaces multy colour patern as approved by Engr - in - Charge, complete all as specified and directed

M&L for preparation of old plastered unplastered surfaces of walls and applying two coats of Exterior Emulsion paint Ist quality (APEX ultima from asian, luxury from berger, excel from nerolac or equivalent ) on external surfaces in multy colour patern as approved by Engr - in - Charge, complete all as specified and directed

M & L for preparing old surfaces of wall and applying one coat of cement base paint all as specified and as directed. paint all as specified and as directed. (Note : Work involves head load , No extra cost shall be borne by Govt Exchequer in r/o labour involved in this regard and if any sort of clearence from bushes is required)

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth complete all as spcified and directed.

M/S Darshan Kumar (BID ID -3322278)

M/S Narinder Pal Choudhary (BID ID -3330671)

M/S SURINDER PAL (BID ID -3321742)

BR CONSTRUCTIONS (BID ID -3319958)

M/S RAJINDER KUMAR (BID ID -3330733)