Shifting of 2 x 7 TR High Precision Air Cooled AC Package units from T.E. Bldg. Brahampuri to (MSC-II and OFC-II Room) at T.E. Bldg. Shastri Nagar Meerut.

Decomissinging of indoor units of existing fitted 7 TR High Precision Package AC units with Single compressor i/c dismantling the same with related MS stand, accessories like canvas, damper, cable tray as directed by Engineer-in-charge etc. complete as required. (T.E. Bldg. Brahampuri)

Decomissinging of outdoor units (Condenser) of existing fitted 7 TR High Precision Package AC units with Single compressor i/c dismantling the same with related MS stand, accessories as directed by Engineer-in-charge etc. complete as required. (T.E. Bldg. Brahampuri)

Dismantling & removing the existing laid Power/Control cables of Package units, condenser units up to 4 Core x 25 Sqmm complete by unscrewing from the related M.S. racks/tray as directed by Engineer-in-charge etc. complete as required. (T.E. Bldg. Brahampuri)

Recovering the existing laid refrigerant copper piping of Hot gas & liquid gas of different sizes complete by cutting/unscrewing/opening etc. fitted in between the Package unit & condenser units as directed by Engineer-in-charge etc. complete as required. (T.E. Bldg. Brahampur) (a) 1 1/8" OD (28.5 mm) Single run

(b) 7/8" OD (22.2 mm) Single run

Providing & fixing of partition / RA Boxing fabricated out of 50 x 25 x 16 SWG MS Square pipes & 11 mm thick MDF particle board i/c P/F access door, hinges, locking bolts, grid work shall be of maximum size of 1200 mm x 600 mm i/c cutting welding grouting P/F fasteners / screws / washer i/c primer painting & 2 cots of approved shade of synthetic enamel paints etc. complete as required. (T.E. Bldg. Brahampur)

Shifting of 2 Nos. 7 TR High Precision AC Package indoor from 3rd Floor & outdoor from roof of T.E. Bldg. along with connected useful copper pipes, ducting, canvass damper, cables, cable trays from T.E. Bldg. Brahampuri to MSC-II, 2nd Floor & OFC-II, 3rd Floor T.E. Bldg. Shastri Nagar by means of mechanical transport and using heavy labaur and special tools like cranes, ropes, lever i/c loading and unloading etc. complete as required. (T.E. Bldg. Shastri Nagar)

Dismantling of worn out / scrapped 7 AC Package alongwith outdoor units, connected ducting cables, cable trays drain pipes copper piping and stacking the same at desired place in T.E. Bldg. premises from 3rd Floor to Ground Floor by using special tools like heaving labour, crane, ropes levers etc. complete as required. (OFC-II, 3rd Floor Shastri Nagar)

Installation, testing and commissioning of above 7 TR HPAC Package (Shifted from T.E. Brahampuri to OFC-II, 3rd Floor Pakg AC & MSC-II, 2nd Floor at OFC-II 3rd Floor) indoor and outdoor units on existing MS frame i/c fixing of S/A damper, canvas connection of electrical cables, nitrogen pressure testing, vacuemising then supplying and charging 10 Kg. refrigerant R-22/R-407C in the circuit as per terms and condition complete as required. (T.E. Bldg. Shastri Nagar) Note : a) Indoor and outdoor units shall be installed on AVM pads. b) Existing stands shall be used for installation with necessary modification, concrete block shall be covered on edges with 25 mm x 25 mm x 3 mm MS angle. c) Drain pipe shall be connected with existing drain connection

Laying of following sizes of existing recovered copper refrigerant pipeing on the existing MS perforated tray i/c P/F new fitting such as sockets, elbows, tees, brazing, cutting, clamping etc. complete as required. (T.E. Bldg. Shastri Nagar) (a) 1 1/8" OD (28.5 mm) Single run

(b) 7/8" OD (22.2 mm) Single run

Supply & fixing of the following sizes 18 gauge (1.2 mm) copper refrigerant piping on the existing MS perforated tray i/c S/F fitting such as sockets, elbows, tees, brazing, cutting, clamping etc. complete as required. (T.E. Bldg. Shastri Nagar) (a) 1 1/8" OD (28.5 mm) Single run

(b) 7/8" OD (22.2 mm) Single run

Providing & fixing of tubular insulation on copper pipes with class 'O' closed cell elastometric nitrile rubber, tubular sleeves section & 19 mm thickness etc. complete as required.(T.E. Bldg. Shastri Nagar) (a) 1 1/8" OD (28.5 mm) Single run

(b) 7/8" OD (22.2 mm) Single run

Laying of existing cable trays by providing new supports, GI nut bolts washer i/c painting etc. complete as required.

Laying of existing recovered PVC insulated PVC Sheathed Aluminum/ copper conductor armored cable sizes up to 4 Core x 25 Sqmm of 1.1 KV grade conforming to relevant I.S. on wall/ existing MS perforated tray etc. complete as required.

Reinstallation of existing recovered ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, support as per approved drawing and specifications & direction of the engineer-in-charge i/c minor modification etc. complete as required.

Supplying, installing, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, support as per approved drawing and specifications of following sheet thickness etc. complete as required. (A) 0.60 mm/ 0.63 mm (24 SWG)

(B) 0.80 mm (22 SWG)

Topping of refrigerant i/c supplying and charging the refrigerant R-22/R-407C in the circuit and per terms and condition etc. complete as required.

Providing and laying of 2 mm thick PVC flooring of approved shade fixed with adhesive Fevicol/ Dunlop or SS make, rolling with wooden roller to remove air bubble etc. complete as required.

Supply & Fixing of 40 x 40 x 5 MS angle i/c cutting welding painting etc. complete as required.

Please Enable Macros to View BoQ information