REPAIR / REPLACEMENT OF CFL / FTL WITH ENERGY EFFICIENT LED LIGHT AT MIRAN SAHIB UNDER GE JAMMU

Amount

Taking out old / unserviceable underground LT cables and connections including pipes, bricks or precast concrete cable cover etc of any from trenches / walls / poles of any cross sectional area and removing from site complete all as specified and as directed.

Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm, 2 core complete all as specified and directed by Engineer-in-Charge. Note: - Wherever cable fixing / connection, suitable thimble should be used as per site situation.

Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm, 2 core complete all as specified and directed by Engineer-in-Charge. Note: - Wherever cable fixing / connection, suitable thimble should be used as per site situation.

Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm, 4 core complete all as specified and as directed by Engineer-in-Charge. Note: - Wherever cable fixing / connection, suitable thimble should be used as per site situation.

Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm, 4 core complete all as specified and as directed by Engineer-in-Charge. Note: - Wherever cable fixing / connection, suitable thimble should be used as per site situation.

Supply and fixing in replacement of 1100 Volt Arial bunched cable having three phase conductor of multistranded compacted circular aluminium conductor screen of extruded semi conducting compound extruded XLPE insulated, insulation screen of extruded semi conducting compound over all metallic screen of copper tape extruded PVC type ST-2 sheathed twisted around bare aluminium alloy messenger generally as per IS : 7098 Part-II of size 3x35 Sqmm + 1 x 25 Sqmm complete with dead end clamp, suspension clamp, Eye Hook, welding and cable jointing kit as per site requirement with the existing LT distribution system complete all as specified and as directed.

Taking down unserviceable street / security light fitting of any type from the pole / building after disconnecting electric connection carefully complete all as specified and directed. Note: - Repair / replacement of spares shall be measured separately.

Supply and fixing in replacement LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing in replacement Bracket for fixing of security light fittings bend to shape, made out of 40 mm dia GI pipe medium grade upto 1.2 metre long fixed with and including two sets of mild steel clamp made out of flat iron of size 50mm x 6 mm, fabricated to shape and fixed with nuts, bolts and washers and two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed. Note: - Mild steel clamps including nuts, bolts and washers shall be measured and paid for separately under respective items.

Supply and fixing in replacement three core PVC insulated flexible copper conductor cable of size 1.5 Sqmm for making connection from junction box to street light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement pole mounting junction box of size 300mm x 200mm x 100mm fabricated out of 2mm thick mild steel sheet, front openable door with hinges, weather proof duly painted with two coats of aluminium paint internally and externally over a coat of red oxide primer suitable to house and including 02 No's aluminium bus bar of 63 Amps capacity mounted on suitable insulators, one No MCB single pole 6A mounted on din rail, internally wired with suitable size of copper conductor cable, provision of bottom cable entry with cable glands including mounting on steel tubular poles with two No's FI clamps 25mm x 3mm with nuts, bolts and washers complete including making connection with 1.5 Sqmm copper conductor PVC insulated 3 core cable from junction box to security lights fittings duly laid inside the steel tubular pole and bracket complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in any type of soil, getting out and levelling of bottom surface to required level for poles / stay assembly / cable complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25m thick complete all as specified and directed.

Removing excavated material from site to a distance not exceeding 50 metre away and depositing where directed not exceeding 1.5 metre from the starting point complete all as specified and as directed.

Material and labour in replacement of galvanised iron pipe light grade 50 mm bore for cable protection as a guard pipe complete all as specified and as directed.

Supply and laying including replacement of well burnt old size sub class 'B' bricks laid flat with width equal to length of brick perpendicular to the direction of cable, adjacent / abutting each other complete all as specified and as directed by Engineer-in-charge in trenches over the cable for protection.

Supplying and laying in trenches clear sand for cushioning under ground cable 8 cm below and 15 cm above complete in level all as specified and as directed.

Supply and fixing in replacement unserviceable aluminium lugs / thimble of size 70 / 95 Sqmm complete all as specified and directed.

Supply and fixing in replacement unserviceable aluminium lugs / thimble of size 50 Sqmm complete all as specified and directed.

Supply and fixing in replacement unserviceable aluminium lugs / thimble of size 35 Sqmm complete all as specified and directed.

Supply and fixing in replacement unserviceable aluminium lugs / thimble of size 25 Sqmm complete all as specified and directed.

Labour for taking out all incoming / outgoing electric connections from LT panel / starter / motor / voltage stabilizer carefully for repair to cable / rectification the fault and re-connecting in position after repair and preparation the cable and fixing complete with nut, bolts, washers for cable size 120 to 400 Sqmm including preparation of 3.5 core cable, 4 wire each alongwith connceted items like thimble, insulation tape and will be considerable in this job complete all as specified and as directed.

Material and labour for replacement of MCCB 3 pole, current rating 100 Amp, thermal setting adjustable type 70%-100% rupturing capacity 16 KA at 415V, 50 Hz complete all as specified and as directed.

Material and labour for replacement of MCCB 3 pole, current rating 125 Amp, thermal setting adjustable 70%-100% rupturing capacity 16 KA at 415V, 50 Hz complete all as specified and as directed.

Material and labour for replacement of MCCB 4 pole, current rating 160 Amp, thermal setting adjustable 70%-100% rupturing capacity 36 KA at 415V, 50 Hz complete all as specified and as directed.

Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid / steel conduit and into existing cast iron / pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Supply and fixing in replacement LED light fitting 1 x 20W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in replacement bulk head luminaries IP 65 with opal diffuser 10 watt, 230 Volts LED type complete with 10 watt LED Bulb complete all as specified and as directed by Engineer-in-Charge.

Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement Self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Material and labour in replacement of surface / suspended waterproof industrial luminaire with polycarbonate housing and diffuser suitable for twin 4 ft LED poly carbonate T8 tube, ingress protection of IP 66 complete all as specified and directed.

Material and labour in replacement of LED polycarbonate T8 tube with in built driver and metal heat sink efficacy of 100 Lm / watt complete all as specified and directed.

M/S GRD ENGINEERS

M/S SALARIA ASSOCIATES

THAPA TRADERS

Prakash Trading Corporation

DARVESH ENGINEERING WORKS

M/S AKHILESHWAR ASSOCIATES

ANIL KUMAR SHARMA