Renovation and Interior work at Chhatrapati Shivaji Bhawan and Indian Institute of Foreign Trade IIFT at Qutab Institutional Area New Delhi-110016

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles above 10 mm and up to 25 mm SQM 50.00 73.40 3,670.00

Dismantling aluminium/ Gypsum partitions, doors,

windows, fixed glazing and false ceiling including

disposal of unserviceable material and stacking of

serviceable material with in 50 meters lead as directed SQM 790 56.35 44,516.50

by Engineer- in-charge.

Carriage of material by mechanical transport including

loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

15.7.4 In cement mortar CUM 5.00 2,060.20 10,301.00

Dismantling stone slab flooring laid in cement mortar

1.5 15.25 including stacking of serviceable material and disposal SQM 30.00 266.45 7,993.50

of unserviceable material within 50 metres lead

Dismantling/Change of HVAC Piping to be added

TOTAL OF DISMANTLING 73,561.00

Modified estimated cost after using correction

factor on DSR 2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 71574.853

GRAND TOTAL (Carried Forward) 71574.853

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

DSR/ MR AMOUNT AMOUNT

S NO DESCRIPTION QUANTITY UNIT RATE

2023 DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the

1.01 11.41A manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

11.41A.1.3 Double charged vitrified tile polisehd finished of size of Tile 1200x600 mm 730.00 Sqm 1577.15 1,151,319.50

TOTAL FLOORING WORKS 1,151,319.50

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made

2.01 12.45 of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board

with BIS certification marks)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved

2.02 26.27 texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light

Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476

mmtrue horizontal

thick beveled level suspended

tegular on interlocking

mineral fibre false ceilingT-Grid of hot

tile (NRC dipped

0.55 all round

TOTAL FALSE CEILING WORKS 1,423,949.00 -

3 WALL FINISHES WORKS

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl

3.1 8.27 plug and drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 0.07 cu m 187277.65 13,109.44

Providing & supplying of Window Blinds as per the approved sample in required shade and style

3.2 MR consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% 137.00 Sqm 2806.00 384,422.00

PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having

fire resistance

PELMET: standard

Fabricate – NFPA

and install 701-89made

pelmet small testing

of 19 mmISO-5659-2 .Theboard,

thick block tear resistance

up to 300should be and

in line with external glazing as per details of Architect. Rate to include finishing exposed surfaces

of the Pelmet with enamel paint of approved shade or 1mm laminate.

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS

3.4 9.154 tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to 1,450.00 Kg 166.80 241,860.00

centre both ways (vertically & horizontally) or at required spacing near opening, with necessary

welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to

IS: 8183, having density 48 kg/m3, 50 mm thick.wrapped in 200 G Virgin Polythene Bags fixed to

wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc.

complete as per directions of Engineer-in-Charge.

Digitally signed by AMIT

DSR/ MR AMOUNT AMOUNT

S NO DESCRIPTION QUANTITY UNIT RATE

2023 DSR ITEM NON DSR ITEM

PLYWOOD PANELLING- Providing and fixing plain lining with necessary screws/nuts & bolts/ nails,

including a coat of approved primer on one face, and fixed on wooden / steel frame work,

complete as per direction of Engineer-in- charge

(Frame work shall be paid for separately).

9.140.1 12 mm thick commercial ply conforming to IS : 1328 BWR type 440.00 SQM 1224.65 538,846.00

LAMINATE CLADDING- P/F 1 mm thick laminate including 4 mm thick MDF as per design for

3.7 MR passage wall plywood panelling complete with filling of grooves with matching or contrast color, 440 SQM 1590.00 699,600.00

as per the direction of the engineer in charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

13.4 12 mm cement plaster of mix :

3.90 1:4 (1 cement: 4 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare

the surface even and smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board

one side white color and other side of board laminted with PVC foil of minimum 14 micron

thickness of approved design pasted with hot melt adhesive for cup boards, work stations and

bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60

Applying priming coats with primer of approved brand and manufacture, having low VOC

(Volatile Organic Compound ) content

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

Providing and fixing ISi marked flush door shutters conforming to IS :2202 (Part I) non-decorative

type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces

9.21.2 30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws 23.42 Sqm 2172.10 50,870.58

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISi

3.15 marked flush door shutters conforming to IS: 2202 (Part I)

Digitally signed by AMIT

DSR/ MR AMOUNT AMOUNT

S NO DESCRIPTION QUANTITY UNIT RATE

2023 DSR ITEM NON DSR ITEM

9.22.1 On one side only Sqm 478.00 -

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges

of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass

excluded) (overall area of door shutter to be measured):

9.24.1 Rectangular or square 23.42 Sqm 199.15 4,664.09

14.6 Renewing glass panes, with wooden fillets wherever necessary:

14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 1.20 Sqm 1580.90 1,897.08

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for

3.19 MR wooden doors of approved make and model all complete as per the direction of Engineer-in- 8.00 Each 895.62 7,164.94

3.20 MR Repairing Flush doors for minor dents with polish wherever required 30.00 Sqm 2152.00 64,560.00

Modified estimated cost after using correction factor on DSR 2023 on account of GST @

GRAND TOTAL (Carried Forward) 4,997,881.47

GRAND TOTAL (Carried Forward) 4,997,881.47

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

medium class PVC conduit, with modular switch, modular plate, suitable GI box and

A.1 earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core

cable etc as required.

1.55 Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed PVC conduit, and earthing the point

with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor Metre 370 334.00 123,580.00

single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq.

mm FRLS PVC insulated copper conductor single core cable for loop earthing as

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate

& switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 220 122.00 26,840.00

1.24.5 6 pin 15/16 amp socket outlet Each 40 197.00 7,880.00

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch Each 30 40.00 1,200.00

A.5 box excluding modular plate as required.

1.27 Supplying and fixing following size/module, GI box along with Modular base & cover

plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 400 334.00 133,600.00

Digitally signed by AMIT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 150 439.00 65,850.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1,365.00 68,250.00

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels

fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats

etc.complete with providing of Anchor fastners and all necessary hardwares as required

for fixing, including cutting, bending, welding, drilling, bolting etc. as per design as

required and painted with one coat of primer and two coats of enamel paint of approved

Supplying & installing following size of perforated painted with powder coating M.s cable

trays tee with perforation not more than 17.5%, joint with connectors,suspended from the

ceiling with MS suspendersincluding bolts & nuts, Painting suspenders etc.as required

B.3 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized

raceway with internal partition/compartmentized of the following sizes including

providing removable 3 mm thick GI cover, knock out holes and fixing accessories

earthing with 8 SWG copper earth wire complete as required including floor supports,

bends, access boxes, tap off boxes and cross over as per specification and site

requirement. (overhead / wall mounted recovery & function boxes shall be 1.6 mm thick)

c) MR 150 mm wide x 38 mm deep raceway RM 40 1,290.20 51,608.00

MR Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box Nos. 6 1,537.01

B.4 including providing 3 mm thick stainless steel cover as per specification. 9,222.06

2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. As Each 13.00 -

2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature -

circuit breaker suitable for inductive load of following poles in the existing MCB DB

C.2 complete with connections, testing and commissioning etc. as required.

2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB -

DB complete with connections, testing and commissioning etc. as required.

2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet -

steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus

C.4 bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/ RCCB/ Isolator)

Digitally signed by AMIT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 -

volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300

milliamperes in the existing MCB DB complete with connections, testing and

C.5 commissioning etc. as

MR Charges for shifting of existing EPBAX room to new roo complete as per instruction of L.S 1 75,000.00

Engg- In charge

MR Charges for supplying and fixing of 20KVA UPS complete as per instruction of Engg- In - Each 1 175,000.00

Modified estimated cost after using correctiong GST 12% to

18% factor on DSR 2022 on account of 1.0633 1,470,124.96 310,830.06

Modified estimated cost after using correction factor on DSR

GRAND TOTAL (Carried Forward) 1,741,261.65

GRAND TOTAL (Carried Forward) 1,741,261.65

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR 2023/ TOTAL

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER

1 MR CONCEALED BASIN MIXER TOP MOUNTED) (COMPOSITE ONE EACH 6 6,100.00 36,600.00

PIECE BODY) Model No. ORP-CHR-10005BPM or equivalnt

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN,

2 MR SIZE: 410x410x130 mm Model No VCS-WHT-503901 or equivalent EACH 6 12,500.00 75,000.00

Supply, Installation, Testing and Commisioing of suitable

compatible WASTE COUPLING 32MM- FULL THREAD- WITH CERAMIC

3 MR CAP-*130MM HEIGHT *65MM CERAMIC CAP Model No. ZAS-WHT- EACH 6 2,267.00 13,602.00

9002 or equivalent

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH

INTERNAL PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL

4 MR CONNECTION PIPES & WALL FLANGE (Model No.ALD-CHR- EACH 6 1,850.00 11,100.00

769L250X190 or equivalent)

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND

INSTALLATION WALL HUNG WC WITH UF SOFT CLOSE SLIM SEAT

5 MR COVER, HINGES AND ACCESSORIES EACH 8 13,797.00 110,376.00

SET, SIZE: 375X520X400 MM SLSWHT- 6953BIUFSM or equivalent

Supply, Installation, Testing and Commisiong of PNEUMATIC

6 MR CONTROL PLATE ACPWHT- EACH 8 6,195.00 49,560.00

5012505 or equivalent)

Supply, Installation, Testing and Commisiong of ANGULAR STOP

7 MR COCK WITH WALL FLANGE OPP-CHR-15053PM or equivalent) EACH 20 1,175.00 23,500.00

Supply, Installation, Testing and Commisiong of

8 MR Urinal Valve Auto Closing System with Built-in Control Cock & Wall EACH 9 2,250.00 20,250.00

Flange PRS-CHR-077 or equivalent)

Supply, Installation, Testing and Commisiong of HAND SHOWER

9 MR (HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 6 2,375.00 14,250.00

AND WALL HOOK ALD-CHR-573 or equivalent

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE

PIECE SLIM CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-

10 MR TYPE” DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT EACH 6 7,381.00 44,286.00

FLUSH CONTROL PLATE) Model No. APCWHT- 5012500S or

Digitally signed by AMIT

DSR 2023/ TOTAL

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,

17.10 including painting of fittings and brackets, cutting and making

11 good the walls wherever required :

17.10.2 Kitchen Sink without Drain Board

Providing and fixing P.V.C. waste pipe for sink including P.V.C.

17.28 waste fittings complete.

12 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground fixed to wooden

13 17.31 cleats with C.P. brass screws and washers complete. EACH 6 1,607.95 9,647.70

17.34 Providing and fixing toilet paper holder

Providing and fixing C.P. brass angle valve for basin mixer and

18.53 gyser points of approved quality conforming to IS : 8931

15 mm nominal bore

Cutting chases in brick masonry walls for following diameter sand

cast iron/centrifugally cast (spun) iron pipes and making good the

same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6

17.61 graded stone aggregate 12.5 mm nominal size) including

16 necessary plaster and pointing in cement mortar 1:4 (1 cement : 4

Digitally signed by AMIT

DSR 2023/ TOTAL

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

18.8 cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work including cutting chases and making good the

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10,752.00

Providing and fixing C.P. brass long body bib cock of approved

18.51 quality conforming to IS standards and weighing not less than 690

18.51.1 15 mm nominal bore EACH 2 798.95 1,597.90

Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

Providing and fixing urinal large size ofJaquar make of approved size and

27 MR quality including all acessories like angle valve, spreader, waste pipe etc EACH 9 4100.00 36,900.00

complete as required.URS-WHT-13261

Modified estimated cost after using correction factor on DSR

2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 490,924.16

GRAND TOTAL (Carried Forward) 490,924.16

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-HVAC

DSR HVAC AMOUNT AMOUNT

S NO DESCRIPTION UNIT QTY. RATE

2022 DSR ITEM NON DSR ITEM

Supply, Fabrication, Installation, Testing & Commissioning

of following gauges of ducting complete with splitters,

supports, dampers, and turning vanes as per specification

1 and HVAC lay out. Aproved Makes: JINDAL, TATA, SAIL,

Equivalent. All exposed ducts and supports shall be

painting with 2 coats of primer. (Make-

JSW/ESSAR/TATA/ASIAN/SAIL)

2 MR Duct insulation 13 mm nitrile SQM 50 550.00 27,500.00

3 MR Duct Accoustic Lining 10 mm open cell nitrile SQM 10 900.00 9,000.00

4 Supply Air Grille

Supply, installation of aluminium extruded powdercoated

supply air square grilles with four side flanges (0 degree

deflection), with aluminium powder coated, multiple flape

type with dampers.(60x60)

SUPPLY/RETURN AIR GRILL SQM 45 2500.00 112,500.00

5 Cable Wiring

Wiring for circuit/ submain wiring alongwith earth wire with

the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit asc required.

Modified estimated cost after using correctiong GST 12% to

18% factor on DSR 2022 on account of 1.0633

Modified estimated cost after using correction factor on DSR

2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 264,042.75

GRAND TOTAL (Carried Forward) 264,042.75

Digitally signed by AMIT

WIFI- DATA AND NETWORKING

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

A DSR (INR) NON-DSR (INR)

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets

the growing requirements of wireless networks by delivering a better

user experience. The 1830 Series extends support to a new generation

of Wi-Fi clients, such as smartphones, tablets, and high-performance Nos. -

laptops that have integrated 802.11ac Wave 1 or Wave 2 support.

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors

1.53.1) for Connectivity of Hub to End Point.High Speed Gigabit Ethernet U/UTP, 250 METRE 400 57.00 22,800.00

2 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installation , Testing and Comissioning of I/O port for CAT6 cable Nos.

termination at Workt table end. Keystone Unshielded Outlet, 180DG C6, Blue 12 400.00 4,800.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos.

termination at Work Table end Redantant . Keystone Unshielded Outlet, 12 400.00 4,800.00

4 MR 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos.

5 MR termination at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos.

termination at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG 12 400.00 4,800.00

6 MR C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user device connectivity.High Speed

Gigabit 24AWG U/UTP Patch Cord Blue, LSZH, C6, 2M Nos. 12 400.00 4,800.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to Rack end device connectivity. (Rack

end), High Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos. 12 400.00 4,800.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, Nos. 12 400.00 4,800.00

9 MR 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to Rack End Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, Nos. 12 400.00 4,800.00

10 MR 2M (Yellow)

Digitally signed by AMIT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

A DSR (INR) NON-DSR (INR)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Nos.

Staggred Jack Panel for CAT6 cable termination at rack end. Data Active 1 3,500.00 3,500.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Nos.

Staggred Jack Panel for CAT6 cable termination at rack end. Data Active 1 3,500.00 3,500.00

12 MR Redandant

Supply, installation and configuration of 8 Nos 8 PORT POE SWITCH (with Nos.

technical specifications as per specification document) 1 9,250.00 9,250.00

Supply , installation , testing and commissioning of 8U Equipment rack to house all rack

mountable equipment, with internal wiring, front glass door, power distribution units etc. 1 15,000.00 15,000.00

14 MR Complete with standard accessories

Modified estimated cost after using correctiong GST 12% to 18% factor

Modified estimated cost after using correction factor on DSR 2023 on

account of GST @ 0.973

GRAND TOTAL (Carried Forward) 93,238.67

GRAND TOTAL (Carried Forward) 93,238.67

Digitally signed by AMIT

Electrical Lighting

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Recessed luminaire

with LED (Light Emitting Diode), system power: 28 W, luminous flux of

2800 lm, colour temperature of 6000 K, Neutral white, 230 V constant

current driver, 70% of luminous flux after 50,000 operating hours, energy-

efficient LEDs, CRI

> 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire

housing in Aluminium Extrution, polyester white powder coat applied over

a 5- stage pre-treatment, Opal diffuser for glare-free uniform light,

integral electronic control gear,

MR Supply, Installation, Testing and Commissioing of Recessed

downlightwith HPE (High-Performance Efficiency) with LED (Light

Emitting Diode), system power: 12 W, Luminous flux of luminaire 1320 lm,

110 LM/W system efficacy, Colour temperature of 4000 K, Neutral white,

CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000

operating hours; energy-efficient LEDs, direct light emission, housing in

die-cast aluminium, Polyester powder white coloured coat applied

over a 5-stage pre-treatment trim, prismatic diffuser for

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed

luminaire with LED (Light Emitting Diode), system power 28 W,

luminous flux of luminaire 3080 lm, 110 LM/W system efficacy, direct

light emission CRI>80, colour temperature of 4000K, Neutral white, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours,

energy efficient LEDs, luminaire profile in aluminium, Plastic moulded

3 MR end caps, Polyester powder Aluminium white coloured coat applied Nos 3 4000 12,000.00

over a 5- stage pre-treatment, high efficiency glare- free snap fit micro-

prismatic diffuser for homogeneous light distribution, ZHLS (Zero Halogen

Low Smoke) internal wiring, integral Electronic control gear, adjustable

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FAS

FIRE DSR/ MR DESCRIPTION UNIT QUANTIT RATE TOTAL AMOUNT

FIRE DSR/ MR DESCRIPTION UNIT QUANTIT RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog Pcs

1 17.2.4 addressable photothermal detector complete with mounting base 24.00 2,858.00 68,592.00

complete as required.

Supplying, installation, testing & commissioning of addressable Pcs

17.2.14 manual call point complete as required. 3.00 3,871.00 11,613.00

Supplying, installation, testing & commissioning of addressable horn Pcs

17.2.15 cum strobe complete as required. 3.00 3,506.00 10,518.00

Supplying, installation, testing & commissioning of fault isolator Pcs

complete with base as required.

3 Supplying, installation, testing & commissioning of response indicator Pcs

17.2.5 on surface/recessed MS Box having two LED, metallic cover 3.00 276.00 828.00

complete with all connections etc as required.

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM

600/1000V rated with annealed copper conductor having XLPE

17.5.2 insulation, steel wire armouring & FRLS outer sheath complete as 290.00 173 50,170.00

Modified estimated cost after using correctiong GST 12% to 18%

factor on DSR 2023 on account of 1.0633 161,122.91 -

Modified estimated cost after using correction factor on DSR 2023 on

account of GST @ 0.973

GRAND TOTAL (Carried Forward) 156,772.59

GRAND TOTAL (Carried Forward) 156,772.59

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - AV & VC

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION

DSR (INR) NON-DSR (INR)

Supply, Installation,Testing and commisioning of Biometric and

RFID based Access terminal, RFID Supported (125kHz EM &

13.56MHz MIFARE, MIFARE Plus, DESFire/EV1,

Access FeliCa), Mobile Card (NFC/BLE), 30,000 (1:1 User based), 5 Faces/

Control User Capacity, 5,000,000 Text Logs, 2" TFT Screen, 24 bit Voice

DSP with ECO Cancillation, Eternet, RS 485, Weigand

Supported, Complete as

Supply Installation Testing & Commissioning of Access Control

Software including Time Attendance Multi Reader and

controller confuguration and upgradable to Enterprise level

with unliimited users. Databse Supports: MS SQL, Oracle,

and MS Access database types. Type of technology

2 Software Nos 0 - -

supports: IRIS Sacnner, Biometric, Face, RFID , etc supports

template management , Highly secured communication with

server,Allows for real- time monitoring of system status and user

activities with optional audio alerts. tamper detection, network

communication loss, and many other system attributes.

86” interactive board with Windows 10 Pro, Intel processor, 32GB

RAM, 256GB SSD, and Android 5.0+ (Quad-core Cortex A73 +

3 A53). Features include 4K UHD resolution (3840×2160), IR touch No.s 7 158,000.00 1,106,000.00

(finger/pen), WiFi, Bluetooth, USB, RJ45×2, HDMI, SPDIF, RS232, and

178° viewing angle. Newline Rs86+ model.

4 Board Providing, supply and installation No.s 5 5,000.00 25,000.00

Providing, Supply and Installing Metal Floor Box with top lip and lid

made of SS brush finish, fixed flush with top level of flooring (or as

directed by the site Engineer), having integrated housing for

HDMI, VGA, LAN, Audio and universal power points and suitable

for audio video connections, complete with all accessories. Make

and model: Logic LG FB201/ Equivalent

6 Collar mic Shure SVX14/PGA31 Headworn Wireless Microphone System Nos. 7 24,000.00 168,000.00

Providing and Supply of Podium Microphone AKG CGN99 (Short)

with all necessary connectors and accessories complete

Digitally signed by AMIT

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION

DSR (INR) NON-DSR (INR)

Supply, Installation, testing and commissioning of 6.5" two-way

coaxial thin edge ceiling loudspeaker, 100V transformer power

taps : 24,12,6, watts, Conical dispersion : 145° or more,

8 impedance : 8, low impedance RMS continous power : Nos. 26 12,500.00 325,000.00

30watts, frequency range : 50 Hz - 20 kHz or better,

frequency response : 60Hz - 20KHz or better etc complete

required as per specifications.

Supply, Installation, testing and commissioning of quad channel

Amplifier, 4 X 120watt or more, THD+N (@ 1 kHz) : < 0.3%,

Technology : Class-D, Common mode rejection ratio : 70dB or

better, Temperature controlled FAN, Switching mode power

supply, should have Protection features like : DC Short circuit &

Over heating & Over load & Signal limiting etc, Built-in high

pass filter and gain adjustment option etc complete required

as per specifications.

Supply, installation, testing and commissioning of of 2.5

Speaker Sqmm x 2 core

Cables ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker

11 SITC of Cisco 9120AX Series Access Points No.s 28 134,400.00 3,763,200.00

13 SITC of Identical Power Supply for Cisco 9200L-24P-4X No.s 1 104,400.00 104,400.00

15 SITC of Cisco SFP-10G-SR (10G) No.s 6 34,200.00 205,200.00

Digitally signed by AMIT

FURNITURE DETAILS

Reference Image

S No DRS NO. Item Details Item Description Unit Qty Rate

Providing and supplying Study Chair made of teak wood with melamine polish

wooden legs.with wooden Legs of 50mm x50mm & seat cushioned

Providing and placing in position of Wooden Study table overall size of table

1930 x 450 x 750mm. The table is made of 18 mm thick Plywood finished with

Study Table Teak veneer & Melamine polished. Inside 1mm laminate pressed .The Edge

(6'3") lipping will be wooden half round . one internal slab finished with laminate &

internal Ms frame for supporting the stucture of table of 25mmx25mm pipe

complete all as per the direction of Engineer-in-charge.

Providing and placing in position of Wooden Study table overall size of table

1290 x 450 x 750mm. The table is made of 18 mm thick Plywood finished with

Study Table Teak veneer & Melamine polished. Inside 1mm laminate pressed .The Edge

(4'3") lipping will be wooden half round . one internal slab finished with laminate &

internal Ms frame for supporting the stucture of table of 25mmx25mm pipe

complete all as per the direction of Engineer-in-charge.

Providing and fabricating podium of height 3'7" and width 24" and depth 20"

with combination of MS framework (40mm dia 16 gauge pipe for center support,

19mm sq MS pipe 16 g section for top frame as per detail) and 24"w x 20" d x

19mm thk. WP plywood top as per design and detail. All exposed wooden

4 MR Podium surfaces to be finished with 1mm thk. laminate of approved make and shade, Nos 5 12,500.00 62,500.00

complete with 2mm PVC edge band for exposed edges. The front edge to be

provided with a raised 12mm half round BW edge profile. The base of the table

to be provided with heavy duty height adjustable levellers. The podium top shall

also incorporate a 12mm deep niche for holding chalk and a circular niche cup

holder as per design and detail. R

Digitally signed by AMIT

Schedule of Quantities: Signages and Artwork

S No Description Unit Qty Unit price DSR Non-DSR Amount

1 MAIN SIGNAGE

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted Each 2 5000 10,000.00

/White milky acrylic 3mm laser cut pasted on top with proper names (Library) laser cut

acrylic letters in approved colour.Fixing provision using 3M VHP double sided tape as required.

Signage Size 36x18 inch

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names/ Departments written

using plottercut vinyl or laser cut acrylic letters in approved colour.Inserting provision for

changing names .Fixing provision using 3M VHP double sided tape as required. Each 15 1,967.00 29,505.00

Signage Size 12x5 inch

3 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names

/Departments written using plottercut vinyl or laser cut acrylic letters in approved colour. Each 2 15,000.00 30,000.00

Provision of fixing screws/ Studs etc or as per the direction of the engineer.

4 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan Each 3 2,673.00

Printed on photoluminescent media and inserted between the two frames. Should be fixed 8,019.00

on the wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

5 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance free sealed nickel cadmium

battery included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters

increase visibility • Anodized aluminum faceplate • Field applied chevron directional Each 3 3,289.00 9,867.00

indicators simplify installation • Long life, energy-saving LED lamps • Dual-voltage

120V/277V AC Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

6 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on

top. Both side / Single Side facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical specifications and directions of

a Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 3 617.00 1,851.00

b Photoluminescent, Floor Level - 18"x6" Each 3 617.00 1,851.00

c Photoluminescent, Fire Alarm Call Point - 10"x8" Each 3 535.00 1,605.00

Digitally signed by AMIT

S No Description Unit Qty Unit price DSR Non-DSR Amount

d Photoluminescent, Fire do not use lift- 10"x8" Each 3 535.00 1,605.00

e Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 6 535.00 3,210.00

7 Wall Painting Digital Art

Customised wall Painting with Moulding frame & Canva Digital print as mentioned by

team/Client with 4mm Mdf back & canva pasted on top of it with moulding 35mm 25 Sqm 1000.00 25,000.00

Digitally signed by AMIT

DISMANTLING WORK

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL TOTAL

DSR (INR) NON-DSR (INR)

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles above 10 mm and up to 25 mm SQM 120.00 73.40 8,808.00

Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

15.12.1 Of area 3 sq. metres and below EACH 10.00 367.30 3,673.00

Dismantling wooden/aluminium / Gypsum partitions,/

doors, windows, fixed glazing and false ceiling including

1.3 15.57 disposal of unserviceable surplus material and stacking SQM 380.00 56.35 21,413.00

of serviceable material with in 50 meters lead as

directed by Engineer-in-Charge.

Carriage of material by mechanical transport including

loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal

of unserviceable material within 50 metres lead as per

direction of Engineer-in-charge.

15.7.4 In cement mortar CUM 5.00 2,060.20 10,301.00

Dismantling stone slab flooring laid in cement mortar

15.25 including stacking of serviceable material and disposal CUM 10.00 266.45 2,664.50

of unserviceable material within 50 metres lead

Dismantling/Change of HVAC Piping to be added

TOTAL OF DISMANTLING 55,709.50

Modified estimated cost after using correction

factor on DSR 2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 54205.344

GRAND TOTAL (Carried Forward) 54205.344

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/ MR 2023 DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on

1.01 11.41A 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

Marble stone flooring with 18 mm thick marble stone, as per sample of marble

approved by Engineer-in-charge, over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,

including rubbing and polishing complete with :

Udaipur green marble

Providing and laying 10mm thick WOODEN FLOORING, DADO & SKIRTING (matt

finish) consisting of panels of size 1194mm x 194mm or as per manufacturer

1.03 MR specification having class of use - 23/33, wear resistance level of AC5 as per EN 110.00 Sqm 2960.00 325,600.00

13329 with a high pressure surface treated with aluminium oxide and a specially

patented SURFACE GUARD + on top of a high density fiber board with a density

TOTAL FLOORING WORKS 305,802.00 325,600.00

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

2.01 12.45 galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277

and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

12.45.1 :2011 (Board with BIS certification marks) 75.00 Sqm 1355.00 101,625.00

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595

26.27 mm of approved texture, design and pattern. The tiles should have Humidity

Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 -

0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) 350,040.00

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of

2.02 MR 50mmx100mm (50 mm width & 100 mm Height) U Shape panels in RAL color finish. 20.00 Sqm 3950.00 79,000.00

Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and

length up to 4000 mm. Panel shall be high corrosion resistance and good color

TOTAL FALSE CEILING WORKS 451,665.00 79,000.00

Digitally signed by AMIT

3 WALL FINISHES WORKS

Supply and installation of Aluminium Framed Glass Partition for Access and

3.01 MR Cabin System for minimal frame, room dividing solutions.Single glazed mullion 38.37 Sqm 4100.00 157,325.20

free demountable glass partition using Toughened/ Laminated glass in

proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

3.02 9.1 fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood 0.27 cu m 142949.70 38,596.42

Providing and fixing specified wood frame work consisting of battens 50x25mm

3.03 8.27 fixed with rawl plug and drilling necessary holes for rawl plug etc. including

priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 0.07 cu m 187277.65 13,109.44

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with

10mm diameter bolts, nuts and wooden plugs and embedding in cement

3.04 9.53 concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded 30.00 Each 228.25 6,847.50

stone aggregate 20mm nominal size).

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with Top-

Bottom Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg.

Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°.

Hold Open (standard): 90° hold open.Suitable for 10-12 mm glass

Weight of floor spring approx : 6kg

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested

approved make and model all complete as per the direction of Engineer-in-

Providing and fixing 12mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot & double acting hydraulic floor spring type fixing arrangement and making

3.06 21.18 necessary holes etc. for fixing required door fittings, all complete as per direction 20.00 Sqm 5325.90 106,518.00

of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised

designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).

Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on

3.07 MR Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) 20.00 Sqm 2250.00 45,000.00

to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market

Department. Contractors payment wouldn't be released until & unless he/she

produces orginal warranty certificate from the manufacturer.

Digitally signed by AMIT

Providing & supplying of Window Blinds as per the approved sample in required

shade and style consisting, of Roller Blinds comprising of optima screen Fabric

comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA

701-89 small testing ISO-5659-2 .The tear resistance should be complying to

ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for

quick,easy and safe installation,moulded plastic with steel spring support and

inserted into the tube end. It shall be driven by a ball chain pulley with ball chain

and can be positioned at right side or left hand side of the Shade. The Shade

when lowering or raising, shall be automatically locked in position upon release

of the ball chain by means of a built in friction lock.Universal clutch for left and

right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded

of plastic witha steel location pin. The plug shall be inserted into the tube end.

(Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall

be of coated steel & provided with covers and used in right hand or left hand

positions differentiated by the acceptance of the of the rectangular drive unit

support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling

Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside

maximum of80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm

internal diameter & skin thickness of 1mm and shall incorporate a key way

integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a

Flat Bottom made up of powder coated steel. The BALLCHAIN shall be 2mm

diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm

pitch to form an endless ballchain.It is used for raising or lowering action of the

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm

high and in line with external glazing as per details of Architect. Rate to include

3.09 MR finishing exposed surfaces of the Pelmet with enamel paint of approved shade 32.00 RM 1781.74 57,015.76

or 1mm laminate.

PLYWOOD PARTITIONING- Providing and fixing full height partly double skin

wooden partitions made out of Frame work to be 50X50X1.60mm

thick aluminum section weight not less than 0.836 kg/rmt with

maximum distance of 450mm c/c both ways(Horizontal/Vertical)

or as directed. Floor or slab with 65 to 75 mm long screw. The

3.1 MR vertical GI member shall be placed at 450 to 500 mm center to 124.00 SQM 3150.00 390,600.00

center and horizontal members to be placed at 600 mm c/c or

as directed by the Engineer as per site conditions with

necessary grooves and cuts etc. including anti-termite treatment

to all wooden members.

INSULATION- Providing and fixing thermal insulation with Resin Bonded Fibre glass

wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in

3.11 12.57 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and 124.00 SQM 358.50 44,454.00

held in position by criss crossing GI wire etc. complete as per directions of

Engineer-in-Charge

Digitally signed by AMIT

PLYWOOD PANELLING- Plywood panelling using 12mm fire retardant Ply fixed on

both side on Aluminium Frame 50mm x 25mm as per approved sample and

architectural drawings. Aluminium frame to be fixed to walls, floor and RCC

Ceiling using fastners.

LAMINATE CLADDING- P/F 1 mm thick laminate including 4 mm thick MDF as per t

design for passage wall plywood panelling complete with filling of grooves with

3.13 MR matching or contrast color, as per the direction of the engineer in charge. 248 SQM 1590.00 394,320.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

3.14 designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 10.00 Sqm 1123.80 11,238.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.

13.83Wall painting with premium acrylic emulsion paint of interior grade, having

VOC (Volatile Organic Compound ) content less than 50 grams/ litre of

13.83 approved brand and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

13.85Applying priming coats with primer of approved brand and manufacture,

13.85 having low VOC (Volatile Organic Compound ) content

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class

9.21 hard wood and well matched commercial 3 ply veneering with vertical grains or

3.2 cross bands and face veneers on both faces of shutters:

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum

3.21 9.23 depth on all edges of flush door shutters (over all area of door shutter to be 4.00 Sqm 462.35 1,849.40

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50

mm for wooden doors of approved make and model all complete as per the

direction of Engineer-in-charge.

Digitally signed by AMIT

Glass Partitioning: GLASS PARTITIONING:- Providing and fixing 12 mm thick

frameless glass Partition of approved brand and manufacture, including

providing and fixing over aluminium channels embedded in the floor and

supported at the top as detailed. The Partition to be fitted firmly to the true

3.23 MR ceiling with necessary anchors / fastners. All the edges of the glass shall have 29.00 SQM 4200.00 121,800.00

pencil nosing and machine polished. the joints in glass shall be filled with

colourless silicon sealent all complete as per Direction of Engineer-in-charge

LOUVER CLADDING- P/F 12 mm thick charcoal louver 2400x178x12mm as per the

pattern or design required at site on an existing Plywood surface with easy

tongue in groove inter-locking system, as per the direction of the engineer in

4.00 UPVC WINDOWS

Providing and fixing factory made uPVC white colour fixed glazed windows/

ventilators comprising of uPVC multi-chambered frame and mullion (where ever

required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized

steel section made from roll forming process

of required length (shape & size according to uPVC profile), ,uPVC extruded

glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm

4.01 for fixing frame to finished wall, plastic packers, plastic caps and necessary

uPVC frame, sash and mullion extruded profiles minus 5%

tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Fixed window / ventilator made of (small series) frame 47 x

9.147B.1 50 mm & mullion 47 x 68 mm both having wall thickness of 10.00 Sqm 8106.00 81,060.00

1.9 ± 0.2 mm and single glazing bead of appropriate

Modified estimated cost after using correction factor on DSR 2023 on account of

GRAND TOTAL (Carried Forward) 3,661,107.54

GRAND TOTAL (Carried Forward) 3,661,107.54

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

A.1 1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface

/ recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

A.2 1.55 Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed PVC conduit, and

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

A.3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper Metre 370 334.00 123,580.00

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

A.4 1.24 Supplying and fixing following modular switch/ socket on the existing

modular plate & switch box including connections but excluding modular plate etc.

1.24.4 3 pin 5/6 amp socket outlet Each 60 122.00 7,320.00

1.24.5 6 pin 15/16 amp socket outlet Each 25 197.00 4,925.00

A.5 1.26 Supplying and fixing modular blanking plate on the existing modular plate Each 30 40.00 1,200.00

& switch box excluding modular plate as required.

A.6 1.27 Supplying and fixing following size/module, GI box along with Modular base &

cover plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

B.1 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FR PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 70 334.00 23,380.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 120 439.00 52,680.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 90 1005.00 90,450.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre1 25 1365.00 34,125.00

Digitally signed by AMIT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

7.1 Supply, fabrication and fixing of steel frame work in position for cable

tray/Panels fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50

channels, flats etc.complete with providing of Anchor fastners and all necessary

hardwares as required for fixing, including cutting, bending, welding, drilling,

bolting etc. as per design as required and painted with one coat of primer and

two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray

of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as

required for fixing and including the cost of providing loop earthing with 2 nos.

50 mm x 6 mm GI earth strips complete as per specifications, as required and as

7.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized

raceway with internal partition/compartmentized of the following sizes

including providing removable 3 mm thick GI cover, knock out holes and fixing

accessories earthing with 8 SWG copper earth wire complete as required

including floor supports, bends, access boxes, tap off boxes and cross over as

per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

c) MR 150 mm wide x 38 mm deep raceway RM 40 1,290.20 51,608.00

7.4 MR Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet Nos. 6 1,537.01 9,222.06

junction box including providing 3 mm thick stainless steel cover as per

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete Each 13.00 -

etc. As required.

D.2 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, -

miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc. as

D.3 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing -

MCB DB complete with connections, testing and commissioning etc. as required.

D.4 2.4 Supplying and fixing following way, horizontal type three pole and neutral, -

sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without MCB/ RCCB/

Digitally signed by AMIT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

D.5 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), -

240 volts, residual current circuit breaker (RCCB), having a sensitivity current

upto 300 milliamperes in the existing MCB DB complete with connections,

testing and commissioning etc. as

Modified estimated cost after using correctiong GST 12%

to 18% factor on DSR 2023 on account of 1.0633 863,287.95 60,830.06

Modified estimated cost after using correction factor on

DSR 2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 900,809.24

GRAND TOTAL (Carried Forward) 900,809.24

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER

CONCEALED BASIN MIXER (WALL MOUNTED) WITH SPOUT

MR 1 (COMPOSITE ONE PIECE BODY) Model No. SIG-CHR-41233 or EACH 3 21,500.00 64,500.00

Supply, Installation, Testing and Commisioning of TABLE TOP

MR 2 BASIN, SIZE: 410x410x130 mm Model No VCS-WHT-503901 or EACH 2 18,942.00 37,884.00

Supply, Installation, Testing and Commisioing of suitable

compatible WASTE COUPLING 32MM- FULL THREAD- WITH

MR 3 CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP Model EACH 2 2,267.00 4,534.00

No. ZAS-WHT-9002 or equivalent

Supply, Installation, Testing and Commisioing of BOTTLE TRAP

(WITH INTERNAL PARTITION) 32mm SIZE WITH 300mm & 190mm

MR 4 LONG WALL CONNECTION PIPES & WALL FLANGE (Model EACH 2 1,850.00 3,700.00

No.ALD-CHR-769L250X190 or equivalent)

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND

INSTALLATION WALL HUNG WC WITH UF SOFT CLOSE SLIM SEAT

MR 5 COVER, HINGES AND ACCESSORIES EACH 2 13,797.00 27,594.00

SET, SIZE: 375X520X400 MM SLSWHT- 6953BIUFSM or equivalent)

Supply, Installation, Testing and Commisiong of PNEUMATIC

MR 6 CONTROL PLATE ACPWHT- EACH 2 6,195.00 12,390.00

5012505 or equivalent)

Supply, Installation, Testing and Commisiong of ANGULAR STOP

MR 7 COCK WITH WALL FLANGE SIG-CHR-41053 or equivalent) EACH 2 4,559.00 9,118.00

Supply, Installation, Testing and Commisiong of CONCEALED

MR 8 STOP COCK WITH ADJUSTABLE WITH WALL FLANGE 15mm SIG- EACH 3 4,589.00 13,767.00

CHR-41083 or equivalent)

Supply, Installation, Testing and Commisiong of HAND SHOWER

(HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE TUBE

MR 9 AND WALL HOOK ALD-CHR-573 or equivalent EACH 3 2,375.00 7,125.00

Supply, Installation, Testing and Commisiong of PNEUMATIC

SINGLE PIECE SLIM CONCEALED CISTERN BODY WITH

INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR

MR 10 WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) Model No. EACH 2 7,381.00 14,762.00

APCWHT- 5012500S or equivalent

Digitally signed by AMIT

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,

17.10 including painting of fittings and brackets, cutting and making

11 good the walls wherever required :

17.10.2 Kitchen Sink without Drain Board

Providing and fixing P.V.C. waste pipe for sink including P.V.C.

17.28 waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to

17.31 13 wooden cleats with C.P. brass screws and washers complete. EACH 2 1,607.95 3,215.90

17.34 Providing and fixing toilet paper holder

Providing and fixing C.P. brass angle valve for basin mixer and

18.53 gyser points of approved quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 12 574.30 6,891.60

Cutting chases in brick masonry walls for following diameter

sand cast iron/centrifugally cast (spun) iron pipes and making

good the same with cement concrete 1:3:6 (1 cement: 3

17.61 coarse sand: 6 graded stone aggregate 12.5 mm nominal size)

16 including necessary plaster and pointing in cement mortar 1:4

(1 cement : 4 coarse sand) :

Cutting holes upto 30x30 cm in walls including making good the

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 3 362.40 1,087.20

Making chases upto 7.5 X 7.5 cm in walls including making

18.78 18 good and finishing with matching surface after housing G.I. METRE 8 171.80 1,374.40

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

18.7 jointing of pipes & fittings with one step CPVC solvent cement

19 and testing of joints complete as per direction of Engineer in

External work - Exposed on wall

18.7.4 32mm nominal outer dia pipes METRE 30 500.95 15,028.50

Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC

18.8 solvent cement and the cost of cutting chases and making

20 good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good the

18.8.2 20mm nominal outer dia pipes METRE 80 513.75 41,100.00

Providing and fixing C.P. brass long body bib cock of approved

18.51 quality conforming to IS standards and weighing not less than

18.51.1 15 mm nominal bore EACH 2 708.40 1,416.80

Providing, fixing, jointing and testing in position of ISI marked UV

stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS :

13592 suitable for rubber ring joints, including all neccessary

willfittings (confirming

be supported withtothreaded

22.0 with nuts, washers etc on 50x50x5 mm slotted angle. The cost

MR will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and

specifications and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 25 536.00 13,400.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 25 416.00 10,400.00

Providing, fixing, jointing and testing in position ISI marked

(IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for

waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at

MR 23 wall/ ceiling level supported by clamp & hangers etc. cutting

holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

Extra for providing & fixing 125 mm dia C.P. grating in place of

C.I. grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with

MR 26 rubber seal and flat round cover with screws and other EACH 8 1,001.00 8,008.00

required fitting complete as required.

Digitally signed by AMIT

Providing and fixing urinal large size of Parryware make of approved size and

MR 27 quality including all acessories like angle valve, spreader, waste pipe etc EACH 3 25000.00 75,000.00

complete as required.

Modified estimated cost after using correction factor on

DSR 2023 on account of GST @ 0.973

GRAND TOTAL (Carried Forward) 393,337.28

GRAND TOTAL (Carried Forward) 393,337.28

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-HVAC

S NO 2019/DSR DESCRIPTION UNIT QTY. RATE

DSR ITEM NON DSR ITEM

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling and heating, having all hermetically sealed inverter

type Scroll Compressor(s), minimum two compressors for above 14 HP

modules,microprocessor based Controller, top discharge type

condensing unit(s), with R 410 A Refrigerant, vibration isolators, with

suitable foundation etc. complete as required. The unit shall deliver the

rated capacity at AHRI Conditions and work even at 50°C ambient

temperature without tripping.The unit shall be suitable to work on 400V

+/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first

charge of the refrigerant and ready for use as required. The COP at AHRI

conditions shall not be less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum

capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit

equipped with synthetic washable media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section

with DX Copper coil, electronic expansion valve, outer cabinet, drain

2 2 pump, grill, necessary supports, vibration isolation, cord less remote

control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC

supply, complete, as required. The unit shall have automatic force shut

down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree

C DB and 19 Degree C WB temperature.

2.5 Corded Remote Nos. 12 2,500.00 30,000.00

Lifting, Shifting, Supply, Installation, Testing & Commissioning of

3 Interconnecting "Y" & "T" Joints i.e. Refnet Joints/ Header with Insulation

for refrigerant piping

3 Copper piping

Digitally signed by AMIT

S NO 2019/DSR DESCRIPTION UNIT QTY. RATE

DSR ITEM NON DSR ITEM

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn

copper refrigerant piping for VRV/VRF system, complete with fittings,

with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with

Class-O closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

9.5 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

12.7 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

15.86 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

19 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

22.2 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

28.58 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

6 Cable Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following

6.1 1.14 sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit asc required.

7 Drain Piping

Supply, installation, testing and commissioning of PVC drain water with

necessary clamps, fittings

such as bends tees etc. and duly insulated.

MR 40 mm dia (9 mm thick insulation) Rm 62 374.00 23,188.00

Digitally signed by AMIT

S NO 2019/DSR DESCRIPTION UNIT QTY. RATE

DSR ITEM NON DSR ITEM

Designing, fabricating, transporting, unloading, storing, fixing in position,

testing and commissioning the following sheet steel cubicle type panels

fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, indoor

type TPN Panels with hinged lockable doors fabricated from 2mm thick

CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

MR access for cable alley and with segregated bus-bar chamber with

tinned aluminium bus bar and including supplying and fixing following

switchgears, meters and accessories, inter-connections, bonding to

earth, powder coated painting and marking as specified. Switch boards

complete as per schematic diagram:or its equivalent as per the

requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic

diagram and as detailed in

the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit

Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat

shrinkable colored sleeves and I/C DMC/SMC bus bars supports at

required intervals complete for cross section, size supports & their

spacing etc. for withstanding fault level of 25 MVA for 1 Sec

a) 40 Amps, TPN, MCB+ ELCB -2 Nos.

b) 32 Amps, TPN, MCB + ELCB - 2nos Each 1 102,895.00 102,895.00

Panel Complete as above

Modified estimated cost after using correctiong GST 12% to 18% factor on

Modified estimated cost after using correction factor on DSR 2023 on

account of GST @ 0.973

GRAND TOTAL (Carried Forward) 1,238,777.57

GRAND TOTAL (Carried Forward) 1,238,777.57

Digitally signed by AMIT

WIFI- DATA AND NETWORKING

S NO DSR/ DESCRIPTION UNIT QUANTITY

RATE TOTAL AMOUNT TOTAL AMOUNT

RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the

growing requirements of wireless networks by delivering a better user

experience. The 1830 Series extends support to a new generation of Wi-Fi

MR clients, such as smartphones, tablets, and high-performance laptops that have Nos. 1 68,820.00 68,820.00

integrated 802.11ac Wave 1 or Wave 2 support.

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1.53.1) Connectivity of Hub to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, METRE 270 57.00 15,390.00

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installation , Testing and Comissioning of I/O port for CAT6 cable Nos. 16

termination 400.00 6,400.00

MR at Workt table end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 16

at Work Table end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow 400.00 6,400.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 16

termination 400.00 6,400.00

MR at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 16

at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow 400.00 6,400.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 16

for information outlet (I/O) to end user device connectivity.High Speed Gigabit

24AWG U/UTP Patch Cord Blue, LSZH, C6, 2M Nos. 400.00 6,400.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 16

for information outlet (I/O) to Rack end device connectivity. (Rack end), High

Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos. 400.00 6,400.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 16

for information outlet (I/O) to end user Redantant device connectivity.High

Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow) Nos. 400.00 6,400.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 16

for information outlet (I/O) to Rack End Redantant device connectivity.High

Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow) Nos. 400.00 6,400.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Nos. 1

Jack Panel for CAT6 cable termination at rack end. Data Active 3,500.00 3,500.00

Digitally signed by AMIT

S NO DSR/ DESCRIPTION UNIT QUANTITY

RATE TOTAL AMOUNT TOTAL AMOUNT

RATE TOTAL AMOUNT TOTAL AMOUNT

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Nos. 1

Jack Panel for CAT6 cable termination at rack end. Data Active Redandant

UTP Components for VOICE -

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1.53.1) Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 RM 310 57.00 17,670.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 13

termination 400.00 5,200.00

MR at Work table end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 13

termination 400.00 5,200.00

MR at Rack end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

at Rack End. Keystone Unshielded Outlet, 180DG C6, For Voice Active Riser Nos. 13 400.00 5,200.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Nos. 1

Jack Panel for CAT6 cable termination at rack end. Voice Active 3,500.00 3,500.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Nos. 1

Jack Panel for CAT6 cable termination at rack end. Voice Active --- Riser Side

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet)

for information outlet (I/O) to end user device connectivity. (Rack end), High

Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos. 13.00 400.00 5,200.00

Modified estimated cost after using correctiong GST 12% to 18% factor on

Modified estimated cost after using correction factor on DSR 2023 on

account of GST @ 0.973

GRAND TOTAL (Carried Forward) 189,023.58

GRAND TOTAL (Carried Forward) 189,023.58

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP

H.265 Vandal Proof Dome camera with 2.8 to 12mm

Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB

WDR (Wide Dynamic Range),3D DNR (Digital Noise

Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode,

Triple streams,3-Axis, IP67, IK10 Vandal Resistant,Colour:

0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video

Compression H.265+, H.265, H.264, MJPEG,

2 Supply, Installation, Testing and Commissioning of

16Ch Embedded Network Video Recorder with 4 Sata

RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant

3 MR SITC of SSD Hard Disk Drive 6TB, 24/7 surveillance Nos 1 20000.00

category Only complete etc as required.etc.all complete. 20,000.00

Supply, Installation, Testing & Commissioning of 32" Flat

Screen HD led (24X7) with Interfaces include HDMI,

DVI, D-sub, Component and Composite input as well as RS-

4 MR 232C and RJ45 for extensive connectivity, remote control Nos 1 30000.00 30,000.00

and wall mount unit / floor stand complete with making

connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 1 6200.00 6,200.00

MR Supply , Installtion , Testing and Comissioning of sheilded RM 340 57.00

twisted pair CAT 6 cable(STP) complete etc as required 4 pair 19,380.00

Total : A - CCTV 203,080.00

Digitally signed by AMIT

Electrical Lighting

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Recessed luminaire with LED (Light

Emitting Diode), system power: 28 W, luminous flux of 2800 lm, colour temperature of

6000 K, Neutral white, 230 V constant current driver, 70% of luminous flux after 50,000

operating hours, energy-efficient LEDs, CRI

> 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire housing in

Aluminium Extrution, polyester white powder coat applied over a 5- stage pre-treatment,

Opal diffuser for glare-free uniform light, integral electronic control gear,

MR Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous

flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral

white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating

hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium,

2 Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, Nos 84 1395.00 117,180.00

prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire with LED

(Light Emitting Diode), system power 28 W, luminous flux of luminaire 3080 lm, 110

LM/W system efficacy, direct light emission CRI>80, colour temperature of 4000K, Neutral

white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy

efficient LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester

powder Aluminium white coloured coat applied over a 5- stage pre-treatment, high

efficiency glare- free snap fit micro-prismatic diffuser for homogeneous light distribution,

ZHLS (Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FAS

FIRE DSR/ MR DESCRIPTION UNIT QUANTIT RATE TOTAL AMOUNT

FIRE DSR/ MR DESCRIPTION UNIT QUANTIT RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of Pcs

intelligent analog addressable photothermal

1 17.2.4 detector complete with mounting base complete as 12.00 2,858.00 34,296.00

Supplying, installation, testing & commissioning of Pcs

addressable manual call point complete as required.

Supplying, installation, testing & commissioning of Pcs

17.2.15 addressable horn cum strobe complete as required. 1.00 3,506.00 3,506.00

Supplying, installation, testing & commissioning of Pcs

fault isolator complete with base as required. 1.00 3,270.00 3,270.00

Supplying, installation, testing & commissioning of Pcs

response indicator on surface/recessed MS Box

17.2.5 having two LED, metallic cover complete with all 1.00 276.00 276.00

connections etc as required.

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured RM

cable, 600/1000V rated with annealed copper

17.5.2 conductor having XLPE insulation, steel wire 210.00 173 36,330.00

armouring & FRLS outer sheath complete as required.

TOTAL 81,549.00

Modified estimated cost after using

correctiong GST 12% to 18% factor on

DSR 2023 on account of 1.0633

Modified estimated cost after using

correction factor on DSR 2023 on 84,369.85 -

account of GST @ 0.973

GRAND TOTAL (Carried Forward) 84,369.85

GRAND TOTAL (Carried Forward) 84,369.85

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - EPABX

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

EPABX Supply, Installation, testing and commissioning of anaolg EPABX of 8

1 incoming lines and 200 analog extension complete in all respect 150,000.00

Analog Supply Installation, Testing and Commissioning of Analog Speaker Nos 12 2,750.00

Phone Phone with

2 backlight. 33,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - AV & VC

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Access Supply, Installation,Testing and commisioning of Biometric and RFID

Control based Access terminal, RFID Supported (125kHz EM & 13.56MHz MIFARE,

MIFARE Plus, DESFire/EV1,

FeliCa), Mobile Card (NFC/BLE), 30,000 (1:1 User based), 5 Faces/ User

1 Capacity, 5,000,000 Text Logs, 2" TFT Screen, 24 bit Voice DSP with Nos 1 16,015.00

ECO Cancillation, Eternet, RS 485, Weigand Supported, Complete as

Software Supply Installation Testing & Commissioning of Access Control

Software including Time Attendance Multi Reader and controller

confuguration and upgradable to Enterprise level with unliimited

users. Databse Supports: MS SQL, Oracle, and MS Access

database types. Type of technology supports: IRIS Sacnner,

2 Biometric, Face, RFID , etc supports template management , Highly Nos 1 76,125.00

secured communication with server,Allows for real- time monitoring

of system status and user activities with optional audio alerts. tamper

detection, network communication loss, and many other system

3 98" main SITC of 98" smart 4K LED Display,Native Resolution 3840 x 2160 (UHD),

LED display Brightness Minimum 490cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-

2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(

Audio out to connect additional Speakers if required) , Built in Touch type

IR spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less,

Operating System Support Windows 7/8/10/Windows

XP/Linux/Mac/Android (Windows XP/Linux/Mac Support one point

touch) , Multi touch point Min 20 Points or Higher, White Board

,Writing, Pen, Palm Eraser ,Save, Screen Capture, Storage, Tool Bar, Air 1 Nos. 169,920.00

Class etc , Android 9.0 or better , Internal Memory (32GB),(Hisi 811, Dual

core A73+Dual core A53), DDR(4GB), Wi- Fi, Power Indicator, or

higher, Screen Share/Mira cast to Connect TAB/Mobile, Web

Browser , 100-240V~, 50/60Hz, 32W(16W x 2) or higher

, ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled

alongwith stylus/pen. The display should also have provision for OPS PC. 169,920.00

Ceiling Supply, Installation, testing and commissioning of 6.5" two-way coaxial

speakers thin edge ceiling loudspeaker, 100V transformer power taps :

24,12,6, watts, Conical dispersion : 145° or more, impedance : 8,

4 low impedance RMS continous power : 30watts, frequency range : Nos. 6 12,500.00 75,000.00

50 Hz - 20 kHz or better, frequency response : 60Hz - 20KHz or better

etc complete required as per specifications.

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

Supply, Installation, testing and commissioning of quad channel

Amplifier, 4 X 120watt or more, THD+N (@ 1 kHz) : < 0.3%,

Technology : Class-D, Common mode rejection ratio : 70dB or

better, Temperature controlled FAN, Switching mode power supply,

5 Amplifier should have Protection features like : DC Short circuit & Over heating & Nos. 1 75,000.00 75,000.00

Over load & Signal limiting etc, Built-in high pass filter and gain

adjustment option etc complete required as per specifications.

Speaker Supply, installation, testing and commissioning of of 2.5 Sqmm x 2 Rmt

6 ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables .

Digitally signed by AMIT

FURNITURE DETAILS

TOTAL AMOUNT TOTAL AMOUNT Reference

TOTAL AMOUNT TOTAL AMOUNT Reference

S No DRS NO. Item Details Item Description Unit Qty Rate Image

DSR (INR) NON-DSR

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The

back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. Seat

Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is

provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer. Armrest is made up

M id back chair

of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

for work station

1 MR features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking Nos 22 11,500.00 253,000.00

with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with

mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be adjusted through

two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height.

The must be greenguard certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer

Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The

back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. Seat

Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is

provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer. Armrest is made up

High back chair of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

2 MR for All cabin & features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking Nos 4 12,500.00 50,000.00

reception with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with

mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be adjusted through

two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height.

The must be greenguard certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. This shall come along a headrest from same family. It shall be SCS IAQ certified for Indoor Air

Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position Study chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. Chair

3 MR Size:- 55cm(w) × 50cm (D). The lumber support consists mouled polyurathene foam & covered with PU leather Nos 30 11,000.00 330,000.00

fabric.. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position of main table of main table with overall size of table 1800 x 1650 x 750mm. The

main table shall be of size 1800 x 750 x 750mm. The side unit shall be 900 x 400 x 675mm The table is made of 25

mm thick M DF.Both Side 1mm laminate pressed on to top with 2 mm edge bending tape. Soft closing access flap

within-build power box are provided on work surface for wire management. The understructure is made of 25 mm

Director Cabin, thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

4 MR Cabin 1 &2 lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge Nos 2 75,000.00 150,000.00

Table banded with matching 2 mm thick PVC lipping. Drawer fronts made of 18 mm thick M DF one side pre-laminate

board with 1mm laminate pressed on to top with 2 mm edge bending tape pedestal construction is BOX-BOX-FILE

type which uses powder coated 400 M M long metal Panel Drawer Slides. Drawer extension is 325 M M . Drawers

have a soft closing . Handles are provided for ease of opening. Pedestals are provided with lock for

security.complete all as per the direction of Engineer-in-charge.

Digitally signed by AMIT

Providing and placing in position of reception table with overall size of table 1650 x 1600 x 750mm. The main table

shall be of size 1500 x 675 x 750mm. The side unit shall be 900 x 375 x 675mm. The table is made of 25 mm thick M DF

– one side pre-laminate board confirming to IS-14587:1998 with 1 mm laminate pressed on to top. Soft closing

access flap within-build power box are provided on work surface for wire management. The ERU top is made of 18

mm thick M DF one side pre-laminate board confirming to IS-14587:1998 with 1mm laminate pressed on to top. The

modesty panel is made of 25 mm thick M DF one side pre-laminate board confirming to IS-14587:1998 with 1mm

5 MR Reception Table Nos 1 75,000.00 75,000.00

laminate pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade

and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick

Pre- laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

lipping. Drawer fronts made of 18mm thick M DF one side pre-laminate board with 1mm laminate pressed on to

top pedestal construction is BOX-BOX-FILE type Handles are provided for ease of opening. Pedestals are provided

with lock for security.Complete all as per the direction of Engineer in Charge.

The workstation comprises a 1200mm x 600mm linear setup with a 25mm thick pre-laminated particle

board table top. The modular partition frame, constructed from CRCA MS, is 60-65mm thick with a

powder-coated finish, designed for electrical and computer wiring. The frame structure includes

vertical uprights, top and bottom sections, and intermediate sections made of extruded Aluminum.

The partition panels consist of 9mm thick pre-laminated particle board finished with laminate, fabric

panels, and soft boards at different heights. Aluminum end trims with powder coating complete the

6 MR Workstation Nos 4 45,000.00 180,000.00

edges. The table top, also made of pre-laminated particle board, is 600mm deep with exposed edges

finished in 2mm x 25mm PVC hot pressed lipping. Heavy-duty MS brackets and cleats support the table

top, and an ABS wire manager is included. The 3-drawer pedestal features 18mm thick pre-laminated

particle board, full-panel type drawer runners, cradle filing arrangement, and stainless steel handles. A

pull-out tray for the keyboard (480mm wide) and a CPU trolley with adjustable height (125mm to

225mm) are part of the setup. Additionally, a quarter-round frosted glass divider (10mm thick) with

polished edges and a foldable end leg panel complement the workstation.

Providing and placing in position officer table. Size 3660mmx 1200mmx 750mm. Worktop shall be

made from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to

top and having chamfered edge. Soft closing dual access flap provided for access to power supply

7 MR and data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board Nos 1 125000.00 125000.00

of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The

Providing and placing in position Centre table.The Glass shall be 10+/-0.3mm thick black tinted

toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a

welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table

8 MR shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.Complete all as per the direction of Nos 1 25,000.00 25,000.00

Engineer in Charge.

Providing and Placing in the position of three seaters long sofa has been designed for visitors. It

features leatherite work while the upholstered seats are fitted on a slatted base1.8m x 69cm x 69cm.

Providing and Placing in the position of three seaters long sofa has been designed for visitors. It

features leatherite work while the upholstered seats are fitted on a slatted base1.8m x 69cm x 69cm.

10 MR single seater Nos 2 20,000.00 40,000.00

18mm thick pre-laminated HDHM R board for durability and strength

Shelves made of 18 mm thickness and back made of 12 mm thickness

16 MR Pantry The Depth of lower cabinet will 500mm & Uper cabinet storage Depth will be 300mm Sqm 4 12,500.00 50,000.00

450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

Digitally signed by AMIT

18mm thick pre-laminated HDHM R board for durability and strength

Full Height Shelves made of 18 mm thickness and back made of 12 mm thickness

17 MR storage Door storage cabinet with lock and key facility with sheves and filing drawers SQM 8 12,500.00 100,000.00 100,000.00

2400mm Ht. 450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

Digitally signed by AMIT

Schedule of Quantities: Signages and Artwork

S No Description Unit Qty Unit price DSR Non-DSR Amount

1 MAIN SIGNAGE

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted Each 1 5000 5,000.00

/White milky acrylic 3mm laser cut pasted on top with proper names (Library) laser cut

acrylic letters in approved colour.Fixing provision using 3M VHP double sided tape as required.

Signage Size 36x18 inch

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names/ Departments written

using plottercut vinyl or laser cut acrylic letters in approved colour.Inserting provision for

changing names .Fixing provision using 3M VHP double sided tape as required. Each 6 1,967.00 11,802.00

Signage Size 12x5 inch

3 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names

/Departments written using plottercut vinyl or laser cut acrylic letters in approved colour. Provision Each 2 15,000.00 30,000.00

of fixing screws/ Studs etc or as per the direction of the engineer.

4 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan Each 2 2,673.00

Printed on photoluminescent media and inserted between the two frames. Should be fixed on 5,346.00

the wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

5 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance free sealed nickel cadmium

battery included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters

increase visibility • Anodized aluminum faceplate • Field applied chevron directional Each 2 3,289.00 6,578.00

indicators simplify installation • Long life, energy-saving LED lamps • Dual-voltage

120V/277V AC Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

6 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on

top. Both side / Single Side facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical specifications and directions of

a Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 3 617.00 1,851.00

b Photoluminescent, Floor Level - 18"x6" Each 3 617.00 1,851.00

c Photoluminescent, Fire Alarm Call Point - 10"x8" Each 3 535.00 1,605.00

d Photoluminescent, Fire do not use lift- 10"x8" Each 3 535.00 1,605.00

e Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 5 535.00 2,675.00

Digitally signed by AMIT

S No Description Unit Qty Unit price DSR Non-DSR Amount

8 Wall Painting Digital Art

Customised wall Painting with Moulding frame & Canva Digital print as mentioned by

team/Client with 4mm Mdf back & canva pasted on top of it with moulding 35mm sqm 6 1000.00 6,000.00

TOTAL 74,313.00

Digitally signed by AMIT