Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹49.0 L+₹98,941 (2.06%)Rejected-Finance 15 281 CHHILI INT ROAD GHATIYA AZAM KHAN AGRA UTTAR PRADESH 282003 | AGRA | UTTAR PRADESH | 282003 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹49.5 L+₹1.5 L (3.05%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹52.4 L+₹4.4 L (9.18%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹98 L
EMD Value
₹2.0 L
Closing Date
19 Jun 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8960 PERIODICAL SERVICES TO BUILDINGS IN HQ WNC NSOD CNAI CCDT LWT WESTERN FLEET OFFICE FMU AND EMC CERTAIN REPAIRS TO HQ WNC AND STONE WASHING UNDER NAVAL DOCKYARD AREA OF AGE BR II GE NW KUNJALI
2023_MES_596724_1
8960/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹2.0 L
Yes
22 Oct 2023
19 May 2023
21 Jun 2023
26 May 2023
19 Jun 2023
31 May 2023
19 May 2023 - 26 May 2023
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed
M&L for brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.
M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4.
Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scafolding complete all as specified and as directed
M&L for Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed .
M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement complete all as specified and as directed .
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound be measured and paid for separately).
Supply only integral water proofing compound complete all as specified and as directed
Dismantling stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons complete all as specified and as directed
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed
M&L for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M&L for machine cut cudappa stone slab 20-25 mm thick over and including 15 mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator complete all as specified and as directed.
M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.
M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
M&L for Italian Marble stone 16/18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Italian Marble stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.
M&L for Italian Marble stone 16/18 mm thick machine cutmachine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.
M&L for cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed (with grey cement and pigment), set jointed and pointed in neat cement slurry in floors and cut and polished over & including 15 mm thick bedding layer in cement mortar 1:6 complete all as specified and as directed..
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and as directed
S&F in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed
M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl necessary scafolding complete all as specified and as directed
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs upto G+9 floor complete all as specified and as directed
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed .
M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed
M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and as directed
M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and as directed
Complete removal of existing treatment on ceiling surfaces and applying two coats of oil emulsion distemper over a coat of primer on ceiling surfaces incl preparation of surfaces complete all as specified and as directed
M&L for Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necessary scafolding for high rise bldgs upto G+9 floor. complete all as specified and as directed
M&L for preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs complete all as specified and as directed
M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds upto G+9 floor complete all as specified and as directed
M & L preparation of newly plastered surfaces and applying three coat of white wash on ceiling
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water etc and applying two coats of plastic paint over a coat of primer complete all as specified and as directed
All as per item No -37 above but one coat
Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer complete all as specified and as directed
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed
Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed
M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) complete all as specified and as directed...
M&L PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) cement concrete as a leveling course on roof surfaces and coping complete all as specified and as directed..
M&L for applying a coat of bituminous primer conforming to IS-3384 @ 1.20 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. Providing and laying five layered 4 mm thick APP (Atatic poly propylene) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm as specified here-in-after. The APP membrane shall be laid using LPG torch-on-application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorized applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slop towards rain water pipe outlet complete all as specified and as directed. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete.
Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each complete all as specified and as directed
Material and labour for gently cleaning the surface of the stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting, followed up by gentle brushing with soft nylon brushes as specified and milded. Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt grit surface accretions, lime wash painting etc by means of water misting and PH balanced surfactants and cleaning complete all as specified and as directed. Note :- Quoted rate shall be inclusive of removing vegeration on wall surfaces, chajjas etc and errection and dismantling of MS tubular double scaffolding upto 35 mtr height and provision of necessary safety equipments to the skilled workers to carry out work.
S&F in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Deign & pattern as approved by GE.
S & F in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.
S&F aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.
Taking up or down existing GI water tubing complete with all fittings of 15 mm bore
Taking up or down existing GI water tubing complete with all fittings of 20 mm bore
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S &F in repairs 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed
S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed
S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-Charge.
S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge.
S & F extruded aluminium alloy handles fabricated type anodized 150 mm size. complete all as specified and as directed by Engr-in-Charge.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.
M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.
S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers.
M&L for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint). All as specified and directed.
Providing and applying double layer with Chowgule Koster dachflex super crack sealer for repairing the cracks of the external wall areas. MAKE: Chowgule Koster (I) Construction Chemicals Pvt. Ltd
M&L for preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufaturer instruction complete as specified and directed by Engineer-in- charge.
Supply only water proofing compound
Garima Construction Co
Shree Ayyappa Engineering
Frends Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .