Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L1 | Accepted-AOC Lowest Tenderer | |
| 2 | L2₹5.7 L+₹97,573 (20.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest Tenderer | |
| 3 | L3₹5.7 L+₹1.0 L (21.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest Tenderer | |
| 4 | L4₹6.7 L+₹2.0 L (41.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest Tenderer | |
| 5 | Rejected-Technical | - | Rejected-Technical Not fulfilled all eligibility criterial as per NIT |
| Sl No | Description | Qty | Unit | M/S RAHUL GUPTA L4 | MEHTA OM PARKASH L3 | NATIONAL TRADING COMPANY L1 | M/s Chopra Constructions L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling structural steel any description including door steel gates etc complete all as specified and directed. | 1 | Qtl | 100 ₹100 | 100 ₹100 | 50 ₹50 | 30 ₹30 Lowest |
| 2.00 | M&L Rolled section/tubular section as in main and cross beams, purlins, rafters, posts where connected to common rafter and running rails etc confirming to Fe-410-W complete all as specified and directed. | 100 | Kg | 30 ₹3,000 Lowest | 60 ₹6,000 | 60 ₹6,000 | 80 ₹8,000 |
| 3.00 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed. | 150 | Sqm | 5 ₹750 | 2 ₹300 Lowest | 10 ₹1,500 | 2 ₹300 Lowest |
| 4.00 | S&F AC designer composite ceiling board 4 to 6 mm thick in 600 x 600 mm panel confirming to IS-14682 type-B category-3 including GI frame, holdfast & suspenders complete all as specified and directed by Engineer-in-Charge. | 150 | Sqm | 300 ₹45,000 Lowest | 480 ₹72,000 | 450 ₹67,500 | 475 ₹71,250 |
| 5.00 | Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as specified and directed. | 40 | Sqm | 10 ₹400 | 10 ₹400 | 10 ₹400 | 2 ₹80 Lowest |
| 6.00 | S & F in repair for Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs. | 30 | Sqm | 480 ₹14,400 Lowest | 499 ₹14,970 | 600 ₹18,000 | 645 ₹19,350 |
| 7.00 | All as per ser item No 6 above but plain sheets as in ridges,eaves,gutters,drain complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs. | 10 | Sqm | 100 ₹1,000 Lowest | 499 ₹4,990 | 550 ₹5,500 | 645 ₹6,450 |
| 8.00 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. | 119 | Sqm | 10 ₹1,190 | 2 ₹238 Lowest | 10 ₹1,190 | 2 ₹238 Lowest |
| 9.00 | Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. | 80 | Sqm | 200 ₹16,000 | 50 ₹4,000 | 20 ₹1,600 Lowest | 90 ₹7,200 |
| 10.00 | M&L for light shade Vitrified tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile) | 80 | Sqm | 700 ₹56,000 Lowest | 1,000 ₹80,000 | 700 ₹56,000 Lowest | 710 ₹56,800 |
Tender Value
₹8.6 L
EMD Value
₹17,160
Closing Date
15 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I)CIF(R)
AGE(I)CIF(R)
COMPREHENSIVE MAINT OF CERTAIN BLDGS, OFFICES AND OFFR ACCN AT PALMA GRN UNDER AGE(I) CIF (R)
2025_MES_745762_1
AGE(I)/R-65/2025-26
Open Tender
Civil Works
Item Rate
90 days
AGE(I)CIF(R)
Class E and above and category a(i)
8 documents required · 8 mandatory
₹500
AGE(I)CIF(R)
₹17,160
Yes
14 Mar 2026
24 Dec 2025
22 Jan 2026
24 Dec 2025
15 Jan 2026
8 Jan 2026
Dismantling structural steel any description including door steel gates etc complete all as specified and directed.
M&L Rolled section/tubular section as in main and cross beams, purlins, rafters, posts where connected to common rafter and running rails etc confirming to Fe-410-W complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.
S&F AC designer composite ceiling board 4 to 6 mm thick in 600 x 600 mm panel confirming to IS-14682 type-B category-3 including GI frame, holdfast & suspenders complete all as specified and directed by Engineer-in-Charge.
Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as specified and directed.
S & F in repair for Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs.
All as per ser item No 6 above but plain sheets as in ridges,eaves,gutters,drain complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for light shade Vitrified tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile)
-------ditto ----- but on vertical surfaces as in skirting including 8-10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.
Green/Black granite on shelves 18 to 20 mm thick set jointed with 3.00 kg per sqm neat cement slurry and pointed with coloured cement to match the surface complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified.
PCC 50 mm thick type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.
M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and directed.
Glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in 10 mm thick cement mortar 1:3 and finished even and rough complete all as specified and directed.
Providing and fixing factory made uPVC white colour casement/sliding window/door,Frame (60mm x 62mm) made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) complete all as specified and directed.
5.5 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exc. 1.5sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.
Taking down wall panelling and similar work complete all as specified and directed.
S&F, solid PVC Wall lining consisting of 5mm thick wood grain printed colour PVC sheet as in striups and chanel inclusive of solvent cement and fixing at site on necessary pvc wooden frame incl fillets as per specifications and drawings
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F in repair, Vitreous china premium/ 1st quality wash down water closet one piece /wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified.
S & F in repair wall/wash basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe Complete all as specified and directed.
Vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including a provision of concrete bedding but fixed in repair complete all as specified and directed.
10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repair complete all as specified and directed. Make : CERA or equivalent
Supply only flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.
Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding tap, chain, plug but including waste coupling, waste pipe, fixing of taps, fitting and brackets and cutting for and pinning in ends of brackets in repair complete all as specified and directed.
Brass CP shower rose 125 mm size in repair complete all as specified and directed.
Stop valve/Angle valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore in repair complete all as specified and directed.
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm in repair complete all as specified and directed.
Bib taps, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm in repair complete all as specified and directed.
PVC connection 15 mm size with PTMT nuts of length 450 mm in repair complete all as specified and directed.
M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old painted decorated wooden surfaces over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of new and old surfaces on wall and applying 1mm thick coat of wall putty (JK/Birla) to make the surface smooth and even complete all as specified and directed.
Applying one coats of oil emulsion distemper on walls including preparation on old plastered surfaces complete all as specified and directed.
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 15,730.00 during AOC Note:- Tenderers shall not quote for this Schedule
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
TenderDocuments65202526.pdf
Tender Documents • 0.99 MB
BOQ_835376.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .