Carryout the Renovation works in TNCSC godown campuses at Namakkal, Paramathivelur, Rasipuram and Thiruchengode Taluk in Namakkal District

Amount

CIVIL WORK

Carryout the Renovation works in Existing TNCSC Godown campus at Vasanthapuam Village at Namakkal Taluk and District . Clearing Scrub Jungle

Cement Concrete 1:2:4 ( one cement, two M sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, but including laying, vibrating, with mechanical vibratos, finishing, curing etc, and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surface of walls, beams etc., shall be finished smooth with cement mortr 1:3 (one cement and three sand) and Kraft paper laid over it without claiming extra, etc.,complete complying with standard specifications and as directed. – for Foundation basement

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls AC sheet roofing without roof timber

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers.

Weathering course with broken brick jelly 20mm size pure slacked lime over RCC roof slab the preparation of 32:12.5 for required depth and slope etc., complete

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approval quality set in cement mortar 1:3 ( one cement and three sand) 12mm thick mixed with wter proofing compound conforming to IS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers .

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting centering for sides and sofits including necessary supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracing using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre and centre etc., complete complying with the standard specification.For plane surfaces such as RCC floor slab, roof slab, beams. Lintels, bed blocks, landing slab, waist slab,portico slabs and beams etc.,

Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvolume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Manufacturing supplying and fixing of steel door with the following specification MS angles of size 40x40x6mm are used for the outer frames and M.S angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. Sheet laid as panel in the shutter and welded intact. M.S.flat 18x5mm is welded over the 32x6mm M.S flat Msandwitching the C.R sheet in between additional stiffeners with 18x5mm M.S flat is provided diagonally at the rear side of the shutter, 3 nos of hinges in case of single leaf and 6 nos of hinges in double leaves shutter to be provided 6 nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2 nos one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double lead door at lock rail section in the door in single leaf door, one more adrop in provided in the inner lock rail section of the door one rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.

Painting two coats of old plastered wall surface with ready mixed Exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting one coats of old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers.

White washing one coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers.

Painting old iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

Supplying and fixing of M.S.iron grill gate using necessary m.s.angles/m.s.flats which should be fixed to gate as per design furnished by the departmental officers including cost of one coat of primer paint, all labour charges for cutting, welding and fixing in position etc., complete complying with standard specification

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss.)

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

Carryout the Renovation works in TNCSC Godown campus at Paramathi Vellore Taluk in Namakkal District. Clearing Scrub Jungle

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls, plain cement concrete.

Cement Concrete 1:2:4 ( one cement, two M sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, but including laying, vibrating, with mechanical vibratos, finishing, curing etc, and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surface of walls, beams etc., shall be finished smooth with cement mortr 1:3 (one cement and three sand) and Kraft paper laid over it without claiming extra, etc.,complete complying with standard specifications and as directed.

Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2@ by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed

Supplying and erecting centering for sides and sofits including necessary supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracing using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre and centre etc., complete complying with the standard specification.For plane surfaces such as RCC floor slab, roof slab, beams. Lintels, bed blocks, landing slab, waist slab,portico slabs and beams etc.,

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvolume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification.

Finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement mortar 1:3 ( one cement and three sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the departmental officers.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats of existing plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting one coats of old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers

White washing one coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers.

Painting old iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

Supplying and fixing of M.S.iron grill gate using necessary m.s.angles/m.s.flats which should be fixed to gate as per design furnished by the departmental officers including cost of one coat of primer paint, all labour charges for cutting, welding and fixing in position etc., complete complying with standard specification

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss.)

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

Carryout the Renovation works in TNCSC Godown campus at Rasipuram Taluk in Namakkal District. Clearing Scrub Jungle

Earthwork on Excavation for foundation in all classes of soils and sub soils and to full depth as may be directed except in rock requiring blasting including initial leads and lifts refilling the sids foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring strutting bailing of water wherever necessary etc., complete complying with standard specifications and as directed .

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, including watering with all layers and consolidation, etc., complete complying with standard specifications

CEMENT CONCRETE 1:5:10(one cement, five M sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including cost nd conveyance of all materials labour for mixing laying compacting, curing, dewatering side shuttering wherever necessary including curing etc., complete complying with standard specification and as directed.

Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing curing etc and providing fixtures like fan clamps in the RCC floor/roof slabs, wherever necessary and bearing surfaces of walls, beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over itwithout claiming extra etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate.

Dismantling, clearing away and carefully stacking materials useful for useful for any thickness of walls, AC sheet roofing without roof timbers

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers

Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting cement for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x25mm x 3mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the tandard specification. (Payment for centering shall be given after the concrete is laid. For plane surface such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams etc.,

Brickwork in cement mortar 1:5 (one cement and five M sand) using best quality II class table moulded chamber bricks 9”x4 3/8”x 2 ¾”for the following including curing etc., complete complying with standard specifications for SS in ground floor.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification

Finishing the exposed surface of all RCC items of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including hacking the surfaces, providing cement mortar nosing beading for sunshades, staircases, steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the departmental officers.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting one coats of old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers

White washing one coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

Carryout the Renovation works in Existing TNCSC Godown campus at Thiruchencode Village at Namakkal Taluk and District. Clearing Scrub Jungle

Supplying and filling Gravel supplying and filling in foundation and basement with filling crushed stone sand in layers of not more than 15cm. thick well rammed watered and compacted 1M3 etc., complete complying with standard specification.

Cement Concrete 1:2:4 ( one cement, two M sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, but including laying, vibrating, with mechanical vibratos, finishing, curing etc, and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surface of walls, beams etc., shall be finished smooth with cement mortr 1:3 (one cement and three sand) and Kraft paper laid over it without claiming extra, etc.,complete complying with standard specifications and as directed. – for Foundation basement

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls AC sheet roofing without roof timber

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and roofing of Galvolume sheet ridge pieces of approved quality size 2.40mx0.60m of 0.47mm tk. With necessary U or J bolts and nuts GI washers etc., complete complying with standard specification.

Weathering course with broken brick jelly 20mm size pure slacked lime over RCC roof slab the preparation of 32:12.5 for required depth and slope etc., complete

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approval quality set in cement mortar 1:3 ( one cement and three sand) 12mm thick mixed with wter proofing compound conforming to IS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers .

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

plying and erecting centering for sides and sofits including necessary supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracing using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre and centre etc., complete complying with the standard specification. (payment for centering shall be given after the concrete in laid) For plane surfaces such as RCC floor slab, roof slab, beams. Lintels, bed blocks, landing slab, waist slab, portico slabs and beams etc.,

Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvolume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Painting one coats of old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

White washing one coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers. godown

Painting old iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss.)

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

M/S. SMR CONSTRUCTION

Shree Shivane Construction

G Velu