PROVISION FOR CONSTRUCTION OF TOILET FACILITY AT OLD HINDU TEMPLE INSIDE THE DAYARAMS FORT DISTT HATHRAS

Amount

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as per direction of Engineer-in-charge. (Rate Including GST).

Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). of specified grade excluding the cost of centering and shuttering. as per direction of Engineer-in-charge. (Rate Including GST).

Providing steel and medium tensile steel bars reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Up to plinth level. as per direction of Engineer-in-charge. (Rate Including GST).

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of Engineer - in- charge. (Rate Including GST).

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc. for mass concrete. as per direction of Engineer-in-charge. (Rate Including GST).

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts. as per direction of Engineer-in-charge. (Rate Including GST).

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform. as per direction of Engineer-in-charge. (Rate Including GST).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) ( Old Bricks available at site as per direction of Engineer-in-charge. (Rate Including GST).

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in super structure and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) : as per direction of Engineer-in-charge. (Rate Including GST).

15 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand). as per direction of Engineer-in-charge. (Rate Including GST).

Recessed Pointing on tile brick work in cement mortar 1:3 (1 cement : 3 fine and): with colour matching including supply of all materials labour T. & P. etc. (Rate Including GST).

30mm thick Red sand stone work (machine cut edges) for wall lining etc. (veneer work) upto10 metre height, backing filled with a grout of average 12 mm thickcement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : including cramps and pins complete. as per direction of Engineer-in-charge. (Rate Including GST).

Supply & fixing of (50x50x6)mm size M.S. iron angle and T door frame , 40x40x6 mm size angle iron door grated with square bars 8 mm size 7.50 cm c/c as per drawing & M.S. iron Z section 1 inch for ventilator frame, section with glass including hold fast cutting fabricating welding nut bolt, Hings etc. complete. as per direction of Engineer-in-charge. (Rate Including GST).

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete. as per direction of Engineer-in-charge. (Rate Including GST).

Providing & laying in position Lime concrete with brick aggregate 25 mm nominal size & 50% composite lime mortar 1:1:1( 1 U.Lime : 1 Shurkhi : 1 C. sand ) foundation & top of wall including supply of all materials labours T&P etc. required for proper completion of work. (Rate Including GST).

40 mm thick Red sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. (Rate Including GST).

Providing and laying vitrified floor tiles size of 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. as per direction of Engineer-in-charge. (Rate Including GST).

Providing and laying Vitrified wall tiles size of 500 x 500 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). as per direction of Engineer-in-charge. (Rate Including GST).

Providing and fixing Mughal Pattern Door (as per existing design) of Sal wood having 4 cm. thick back fixed with frame of 4cm. thick and moulded baini with chaukhat frame including conical headed nails 82 Nos., kunda 3 Nos, pivot 2 Nos. and locking arrangement complete required for proper completion of work. (Rate Including GST).

Providing & fixing Float Plain glass of nominal thickness 5 mm in iron fram etc. complete . (Rate Including GST).

Provision for new Boring 250’ deep 5’’ dia pvc pipe and 50 mm dia column pipe and 3.00 HP Crompton greaves brand submercible pump including starter for water & toilet facility at Monument with labour and materials etc. complete. (Rate Including GST).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate Including GST).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Rate Including GST).

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (two or more coats). (Rate Including GST).

Providing and fixing Granite stone slab for urinal partition including rubbed, edges rounded and polished, cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. (Rate Including GST).

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. (Rate Including GST).

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests etc. (Rate Including GST).

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (Rate Including GST).

Providing and fixing white vitreous china wash basin with pedestal including cost of Brass pillar cock, anglecock, connection pipe, Wastage pipe and UPVC pipes fittings Water tank to wash basin for water supply etc complete as per direction of engineer in charge. (Rate Including GST).

P/F Sanitary and other articles required for execution of work complete. (Rate Including GST). 30-1- UPVC Pipe 1"

30-2-UPVC Socket 1"

30-3-UPVC T 1"

30-4-UPVC Elbow 1"

30-5-Unioun 1"

30-6-Tank Nipple 1"

30-7-UPVC Pipe 1/2" 10' long

30-8-UPVC Elbow 1/2"

30-9-UPVC Socket 1/2"

30-10-UPVC T 1/2"

30-11-UPVC L Brass 1/2 "

30-12-UPVC Solvent

30-13-CPVC Cupler Brass 1"

30-14-Balve Valve 1 "

30-15-PVC pipe 4"

30-16-Elbow 4"

30-17-PVC pipe 3"

30-19-PVC Elbow 3"

30-21-PVC solvent 200g

30-22-Clamp 1/2" 1pkt.

30-23-Mirror 18"x24" fix with steel screw

30-24-500. Water tank triple layer

30-25-P/F M.s. iron jal ( made in 35x35x5 M.s. iron angle fram & M.s. Jali) for safty of 500lt. Water tank. Complete. (app. Weight 40Kg each jal)

30-26-Labour charges for fitting & small materials etc.

P/F Electric items ( Haveles brand) required for execution of work complete. (Rate Including GST).31-1-LED Light complete 65 watt with Piller for LED light (2" dia 2.5mtr. Long and 4Mm thick)

31-2-Elbow PVC 1”

31-3-Pipe 1” dia 3.00 long heavy duty

31-4-Copper wire 1.00 sq mm

31-5-Copper wire 2.50 sq mm

31-6-Copper wire 0.75sq mm

31-7-MCB 32 Amp.

31-8-Switch 10 Amp.

31-9-Switch 20 Amp.

31-10-Socket 20 Amp.

31-11-Consealed box with Light 9 watt complete

31-12-Holder

31-13-Screw 2” (1 pkt-144 Nos.)

31-14-Round sheet for fan box 6” dia

31-15-Round sheet 4”dia

31-16-MCB Box 8v.

31-17-Tap Pcv

31-18-Fan Box

31-21-Junction box

31-22-Sheet 8v.

31-23-Sheet 2v.

31-24-10mm. cable with pvc pipe

31-25-Alarm Bell for water tank

31-26-exhaust fan 12” Havells eq.

31-27-Switch 10 Amp

31-28-Labour charges foelectric fitting

P/F Retro refractive Direction & notice board ( for male, female toilet & water facilty) etc. complete. (Rate Including GST).

Supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. (Rate Including GST).

Providing & fixing of 3 Nos. steel hanger for hanging towel, 04 Nos. soap stand steel, 03 Nos. 10 long hanger etc. with labour chrges for fitting etc. complete.(Rate Including GST).

ANAND CONSTRUCTION COMPANY