Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹66.7 L
EMD Value
₹1.3 L
Closing Date
5 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Water Proofing Works, Periodical Services Internal and External Painting and Allied Civil Works for East primary High School, Central Township, HAL Bangalore
9710
TENDER NOTICE/NCP/29/24-25/6
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1.3 L
5 Oct 2024
21 Sept 2024
21 Sept 2024
5 Oct 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Disposal of surplus earth / moorum / building rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames ,debris, etc., by mechanical transport including loading, transporting, unloading in all lifts / loads upt 10km distance from HAL, etc., all complete as directed by Engineer-in-Charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes with cement mortar 1:6 (1 cement : 6 coarse sand) including curing,leveling and making groove sto mortar jopints with stagging and supports, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing 5.0mm thick glass panes for doors, windows and clerestory window (weight not less than 12.50Kgs/Sq m), including cutting an dfinishing as per site requirement, etc., all complete as directed by Engineer-in-Charge.
Supplying, mixing and providing cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates of 20mm nominal size) including finishing, etc., all complete as directed by Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.
Steel reinforcement for RCC work inlcuding straighthening , cutting, bending, placing in pisition and binding all complete for the works above plinth level, etc., all complete as directed by Engineer-in-Charge.
Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by Engineer-in-Charge.
Plastering to ceiling with 12mm thick on the rough side with cement mortor (1:4) including leveling, curing and making the level smooth and at all heights and execute the work, etc., all complete as directed by Engineer-in-Charge.
Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile organic compound) and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge.
Providing and applying applying white cement based putty of average thickness 1mm of approved brand and manufacure over plastered surface including making the surface even and smooth, etc., all complete as directed by Engineer-in-Charge.
Applying priming coats with primer of approved brand and manufacture having Low VOC mixed with water thinnable cement primer on wall surface having low VOC content less than 50grams / Litre, etc., all complete as directed by Engineer-in-Charge.
Providing and finishing old walls in two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43 Ltr / 10Sq m over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge.
Providing and applying synthetic enamel paint on walls, concrete surafces, wood and steel surfaces, etc., with approved brand and manufacture of required colour to give an even shade in One or more coats on old work by cleaning and srcapping to make the surface smooth before appling paint, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing in position collapsible steel shutters / Gates with vertical channels [20 x 10 x 2]mm and braced with flat iron diagonals [20 x 5]mm size, with top and bottom rail of T-iron [40 x 40 x 6]mm, with 40mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.
Demolishing brick work with cement mortar manually / by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 50m in HAL, etc., all complete as directed by Engineer-in-Charge.
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations with a lead of 50m stacking serviceable and unserviceable material separately including cutting reinforcement bars after making temporary proetction for existing service lines, etc., all complete as directed by Engineer-in-Charge.
Dismantling old plaster in walls / ceiling raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50metres lead, etc., all complete as directed by Engineer-in-Charge.
Removal / Dismantling steel work like collapsable / foldable gates by manually / mechanical means in built up sections without dismembering and stacking within 50metres lead, etc., all complete as directed by Engineer-in-Charge.
Removing dry or oil bound distemper, roof top water proofing cement paint / plastic felt and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge.
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane (Standard make as per IS), black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre / Sq m by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Kgs / Litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints, etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350 / 300 N / 5 cm. Tear strength in longitudinal and transverse direction as 60 / 80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane, etc., all complete as directed by Engineer-in-Charge. Note: (i) A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 05% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole.
Construction of granular sub-base With material conforming to Grade-I (size range 75mm to 0.075mm) having CBR Value-30 by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications, etc., all complete as directed by Engineer-in-Charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete, etc., all complete as directed by Engineer-in-Charge. (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by EIC)..
Providing and fixing Hard wood (SAL) for frames of doors, windows, hand rails, frame work for partitions in etc cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs/with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., all complete as directed by Engineer-in-Charge. (Fastners/hold fasts/SS Screws to be paid separately)
Renewing bottom rail and / or top runner of collapsible gate including making good including making good all damages and applying priming caot of zinc chromate yellow primer of apporved brand and manufacture including taking out frame work and refixing back to working condition, etc., all complete as directed by Engineer-in-Charge.
Renewing wrougt iron or MS wheel or roller of steel door or gate and fitting and fixing same with necessary clamps, nuts, and bolts including necessary welding and erection, taking out and refixing for the wheels of 50mm dia and below, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of ISI marked flush door shutters conforming to IS: 2202 ( PArt 1) decorative type , core of block board construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains on cross bands and face veneers on both faces of shutters using 35mm thick including ISI marked stainless steel butt shinges with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., complete.
Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., complete.
Providing and fixing bright finished brass 100mm mortice latch and lock with min. 6 levers and a pair of lever handles of approved quality with necessary screws, etc., complete.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36Kgs to 80Kgs and door width from 701mm to 1000mm), with double speed adjustment with necessary accesories and screws, etc., complete.
Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., complete.
Providing and fixing of Bright finished door latches wih necessary screws of size [250 x 16 x 5]mm, etc., complete.
Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., complete.
Providing and fixing aluminium tower bolts of size [250 X 10]mm, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws, etc., complete.
Rupees Fifty Three Lakh Sixty Seven Thousand Two Hundred Twenty Three and Thirty Five Paise Only
Light Fittings
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 2X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 2 Nos of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.2XT8+LT8-20-865-(2) /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 70 watts and lumens output not less than 8400 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass with IP66, luminous efficiency ≥120 lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Bajaj :BAJAJ NEXO 42L WH PO PC SD /Equivalent model of approved make luminaries which meets the above technical specification complete in all respect and as directed by Engineer-in-charge. LED used in the fixtures shall be of approved make as per List of approved makes in tender document.
Fan Fixtures
Supply & fixing on existing MS hook 1200mm sweep, Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300mm length, necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge.
Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.
Supply & fixing on wall using suitable mounting arragements, fixing hardwares, testing and commissioning of 400mm dia, wall mounting, oscillating type fan along with speed regulator, power cord with 6A, 3 pin plug top and other connected accessories etc., including necessary interconnections complete in all respects and as directed by the Engineer-in-charge.
SMC Box
Supply and fixing on the wall using suitable angle iron frame work, fixing hardware, suitable size weather proof SMC box(not less then 200x140x95mm) with hinged lockable cover and providing 25A 6way heavy duty PVC connector inside the SMC box, with suitable knockouts for cable entry & exit as directed by Engineer -in-charge.
Lighting Point wiring
Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling whereever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Power Points
Wiring to flush type 3 pin 6A Independent Power socket outlets from the nearest DB in concealed wiring system using suitable size 2mm thick rigid 25mm dia PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 4 Sq.mm for phase and neutral and 1 run of 4 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 6A, 250V gr. power socket outlet & 6A, 250V gr. flush type modular SP switch including necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Wiring to flush type 6 pin 15/16A Power socket outlets from the nearest DB in concealed wiring system using suitable size 2mm thick rigid 25 mm dia PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 4 Sq.mm for phase and neutral and 1 run of 4 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 6/16A, 250V gr. power socket outlet & 16A, 250V gr. flush type modular SP switch with neon indicator including with necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.
Supply of2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 4Cx6 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed by EIC and as per technical specification.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
Supply and connecting indoor/outdoor type cable end joints as per site requirment suitable for 4Cx6Sqmm LT cable of 1.1 KV gr., XLPE insulated Aluminium armoured LT UG cables by employing necessary glands, terminals, bolts & nuts etc., complete in all respects.
Rupees Two Lakh Eighty One Thousand Three Hundred Seventy Nine and Eighty Six Paise Only
Rupees Fifty Six Lakh Forty Eight Thousand Six Hundred Three and Twenty One Paise Only
Approximate Amount Put to Tender
Rupees Ten Lakh Sixteen Thousand Seven Hundred Forty Eight and Fifty Seven Paise Only
Rupees Sixty Six Lakh Sixty Five Thousand Three Hundred Fifty One and Seventy Eight Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN29.pdf
TENDER_DOCUMENT • 1.33 MB
59PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
59TB.pdf
TENDER_DOCUMENT • 3.35 MB
59Undertaking.pdf
TENDER_DOCUMENT • 0.57 MB
59Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
59PQ.pdf
TENDER_DOCUMENT • 0.21 MB
59PB.pdf
TENDER_DOCUMENT • 0.36 MB
59ElectriclTenderDrawing.pdf
TENDER_DOCUMENT • 0.51 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
59ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
59PBF.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .