REPAIR/REPLACEMENTS TO DRAIN PATH CULVERT BOUNDARY WALL, FENCING, HARD STANDING AND MISCELLANEOUS WORKS AT AOC CENTRE AND 454 FD HOSPITAL UNDER AGE B/R II OF GE(S) SECUNDERABAD

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing the excavated soil to a distance exc 250.0 m and n.exc 500 .0m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition of Brick or stone masonry built in cement mortar complete all as specified and directed.

M&L brick work with Fly Ash bricks built in CM 1:4 straight or curved exceeding 6m mean radius complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and directed.

All as per item No-06 above, but except stone complete all as specified and directed.

M&L raised pointing to random or polygonal rubble uncoursed or brought upto course in CM 1:4 complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) ( using 20mm graded crushed stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc all as specified and directed..

Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as directed.

M&L for Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate ) for drain, manhole cover, septic tank covers slabs etc including necessary form work and set in CM (1:4) all as specified and directed. Note:- Reinforcement will be measured and paid seperatel

S&F TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of walls, man holes, septic tank, filter bed etc incl removing of debrie all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with on fair faces of brick/concrete finished even and fair without using extra cement complete all as specified and as directed.

Dismantling chain link fencing wire mesh, any type all as specified and directed.

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground incl barbed wire complete all as specified and directed .

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard or dence soil all as specified and directed..

M&L for cement concrete in foundation filling and mass concrete type D2 1:4:8 (using 40mm graded crushed stone aggregate) all as specified and directed.

S&F for posts and struts in fencing including embedding in concrete and screwing etc. including securing bolts;cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0. all as specified and directed.

Supply only Chain link MS galvanised fencing, of any size or type. all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.all as specified and directed.

S&F 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips all as specified and directed.

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as directed.

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-25 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks including the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for PCC type B1 1:2:4 ( using 20mm graded crushed aggregate) as in copings, surface channel, plinth courses, bed plates, kerbs incl necessary formwork etc all as specified and directed..

M&L for preparation of new surfaces of wall and applying wo coat of cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for broken stone or boulder hard core of gauge exc 63 mm but n exc 150mm deposited spread and levelled in layers n,exc 15 cm thick watered and rammed to true surface complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub bases, sub flooring finished even and rough complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks including the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Concrete bed to drain pipes in PCC type C2 1:3:6 (using 40 mm graded crushed stone aggregates ) including packing under, and haunching against the sides of pipes after they are laid and tested in 450 mm dia pipe complete all as specified and directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 450 dia of pipe complete all as specified and directed.

ATUL ENTERPRISES (BID ID -3509417)

KIRAN CONSTRUCTIONS (BID ID -3509676)

M/S DIVIJA BUILDERS (BID ID -3505201)

harshraj and co (BID ID -3506561)