Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.1 LAccepted-AOC LIG 544 SECTOR 2 NILADRI VIHAR BHUBANESWAR ODISHA 751 021 | KHORDHA | ODISHA | 751021 | L1 | Accepted-AOC Accepted being L1 bidder | |
| 2 | L2₹35.7 L+₹58,590 (1.67%)Rejected-Finance PLOT NO 8 5179 SAILASHREE VIHAR CHANDRASEKHARPUR BHUBANESWAR DIST KHURDA ODISHA 751 021 | KHORDHA | ODISHA | 751021 | L2 | Rejected-Finance Being L2 bidder | |
| 3 | L3₹36.5 L+₹1.3 L (3.75%)Rejected-Finance PASCHIM BHAGABANPORE DARUA CONTAI PURBA MEDINIPUR 721401 | PURBA MEDINIPUR | PURBA MEDINIPUR | WEST BENGAL | 721401 | L3 | Rejected-Finance Being L3 bidder | |
| 4 | L4₹37.8 L+₹2.7 L (7.66%)Rejected-Finance VILL POST UDAMBAR PS REMUNA DIST BALASORE ORISSA | BALASORE | BALASORE | ORISSA | L4 | Rejected-Finance Being L4 bidder | |
| 5 | L5₹38.6 L+₹3.4 L (9.76%)Rejected-Finance 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | L5 | Rejected-Finance Being L5 bidder |
Tender Value
₹42.5 L
EMD Value
₹84,940
Closing Date
6 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Himanshu IDSE EE
Garrison Engineer (I) (CG) Bhubaneswar, Plot No 190/702, Kokila Residency, 2nd Floor, Anant Vihar, Post-Pokhariput, Bhubaneswar- 751020
PROVISION OF ANTITERMITE TREATMENT TO BUILDING AND ASSETS
2024_MES_649516_1
8459/BBSR/22/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Paradip
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (I) (CG) Bhubaneswar
₹84,940
Yes
5 Jun 2024
8 Apr 2024
13 May 2024
8 Apr 2024
6 May 2024
22 Apr 2024
Amount
M&L for providing Post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron/plinth protection and making good the surfaces to match complete all as specified and directed.
M&L to providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. and plugging with cement sand mortar (1:2) using pigment wherever required, to match the existing floor surfaces complete all as specified and directed. Note :- Any crack which is developed during execution of ATT in the floor shall be repaired to match the surface. The cost of this aspect shall deemed to be included in the rates quoted by the contractor
M&L to providing post construction anti termite treatment to soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart along the junction of floor and wall including drilling 12 mm dia holes and plugging with cement sand mortar (1:2) using pigment wherever required, to match the existing floor surfaces complete all as specified and directed. Note :- Any crack which is developed during execution of ATT in the floor shall be repaired to match the surface. The cost of this aspect shall deemed to be included in the rates quoted by the contractor
M&L for providing post construction anti termite treatment to voids in masonry using chemical @ one litre per holes at 300 mm intervals by drilling holes at downward angle of 45 degree and replugging them with cement mortar 1:2 to match the existing surface complete all as specified and directed.
M&L for providing post construction anti termite treatment at points of contact of wood work by using chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6 mm dai holes at downward angle of 45 degree at 150 mm centre to centre and sealing the holes with cement sand mortar (1:2) to match the existing surface complete all as specified and directed.
Taking down chowkats or frame exceeding 1.50 Sq.m and n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Supply and fixing factory made UPVC white colour Casement door /cupboards 30/35mm thick with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking best quality sliding bole 250mm dia having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed. (Note : Glass shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing UPVC glazed door made out of hollow chambered UPVC sections having isolated drainage and reinforced throughout with galvanised steel the corners shall be mitre cut and fusion welded and grooved for aesthetic finish. the outer frame of the bug mesh system shall be made out of UPVC sections having an overall size of 60 mm x48 mm (only on hinge side) and must have wall thickness of 2.2 mm. They shall be provided with "C" type section, galvnised steel throughout the sections (except corners) of minimum 2mm thickness and having the dimensions 25mm x 14mm. Two humbers horizontal T-mullion of size 76mm x 60 mm shall be provided to add strength. The glazing provided shall be of an epoxy coated SS mesh. The but mesh system shall be complete with all necessary hardware like C handle alongwith aldrop the fixing of bug mesh on the putty/plastered wall shall be with the help of nylon fasteners having size of 8 mm x 100mm (brick wall only). All gaps on the sides of window after fixing shall be closed with the help of weather sealants/silicones/gap fillers (cannot be done where excessive tapering is found). The brand of UPVC shall be Plastone (T-60 series) of equivalent as approved by GE complete all as specified and directed.
M&L PCC type B-1, (1:2:4) using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down complete all as specified and directed.
M&L for Rendering 15 mm thick on fair faces of brick work surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
Material & labour for applying two coat of oil bound distemper on new surface complete incl filling putty/filler work where ever drepression found in wall complete all as specified and directed.
Dismantling floor, hearth or wall tiling ,dados of any description and size including cement mortar bedding (but not backing), removing serviceable tiles and staked properly to made on credit and remaining rubbish off the premises complete all as specified and directed.
M&L for Virified Ceramic tiles dark shade 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and provision of 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Material and labour Vitrified Ceramic tiles 8 to 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
SMART ENERGY SOLUTIONS
RANA ENTERPRISES
ANAND CHANDRA DAS
VIJAY ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .