Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.1 LAccepted-AOC | 1 | Accepted-AOC Accepted-Finance | |
| 2 | 0₹2.2 LRejected-Finance | 0 | Rejected-Finance Estimate High |
Tender Value
₹2.5 L
EMD Value
₹2,500
Closing Date
11 Mar 2025, 3:00 pmClosed
Executive Officer
16 Periya Kovil Street, Melathirupoonthuruthi
15th Finance 2nd Installment Tied Grant 2024 2025 Providing New Bohrwell at Ward No 02 Liyakkath Nagar in Melathirupoonthuurthi Town Panchayat
2025_DTP_530280_1
18/2025
Open Tender
Civil Works - Water Works
Works
Melathirupoonthuruthi Town Panchayat
See the Tender Notice
2 documents required · 2 mandatory
₹0
₹2,500
15 Apr 2025
6 Mar 2025
11 Mar 2025
6 Mar 2025
11 Mar 2025
6 Mar 2025
6 Mar 2025 - 11 Mar 2025
Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 150 mm/200mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site. Site will be shown by the TWAD Board officers including construction of mud pit. As per TWAD Schedule of Rates SL NO.12 A
Upto 60 mt. Depth ending below ground level Sl.No 12 A - i
Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer As per TWAD Schedule of Rates SL.NO 12b
Upto 60 mt. Depth ending below ground level Sl.No 12 b - i
Supply of the following casing pipes of ISI approved quality with wall thickness not less than 7.5mm to 8.5mm with PVC couplers and cement Paste etc. Complete and including packing the annular space with pebbles quality and size of pebbles and the PVC pipe should be approved by the departmental officer. As per TWAD Schedule of Rates SL.NO 1.2 AS PER IS 12818/1992
200mm dia OD PVC Plain casing Pipe (CS) Sl.No. 1.2 - 1
200mm dia OD PVC slot casing Pipe (RS) Sl.No. 1.2 - 3
150mm dia OD PVC end cap Sl.No 1.5 - 11
Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete supply and packing the annular space with pebbles of size and quality as approved by the executive engineers TWAD Board SL.NO.12Ei
Charges for developing the borewell with air compressor of 600 cfm capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board officers and conducting yield test by 'V' notch method. TWAD Board SL.NO 13B
supply and delivery of 5 HP single phase Submersible pumpset of duty condition 50lpm x 175 m as per IS 8034 without panel board etc complete as per standard specification.TWAD Board SL.NO.7
Supply and delivery of Flat cable suitable for submersible pumpset 2.5sq.mm TWAD Board SL.No.12.1 - 4
Labour charges for the errection of 5HP submersible pumpset in the Borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth walls errection clamps pressure gauges up to the exterior wall of pumping room and errection of panel board consisting of DPICN switches starter volt meter ammeter, Three Pilot ( Indicating ) lamps capacitor single phasing preventer water level guard and laying and jointing the cable s and twin earthing as per IE rules etc complete and testing to the pumpset and trial run for 10 Days. TWAD Board Sl.No- 17c-i
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD 42
Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only SD.144
Supplying and fixing of pipe and accessories ISI make including cutting and threading cost and conveyance of all charges etc complete as per standard specification.
UPVC 40mm pipe PWD Schedule of rates
32mm GI Pipe
32mm GI Elbow
32mm GI Union
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements etc complete as per standard specification.
ARASU PUSHPA (BID ID -1266866)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .