Construction of SGH Builing First Floor at Thaiyur Panchayat at Thiruporur Panchayat Union in Chengalpattu District for the Year 2025 - 2026 having Package No . 1/2025 - 2026

Amount

Construction of SGH Builing First Floor at Thaiyur Panchayat at Thiruporur Panchayat Union in Chengalpattu District for the Year 2025 - 2026 having Package No . 1/2025 - 2026

Brick work in CM 1:5 mix using country bricks, ground moulded of size 23 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.Ist Floor

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS rod or RTS bar will be supplied departmentally at section stores and cost will be recoverd at issue rate). the binding wire shall supplied by the contactor.

Supplying & Erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings complete complying with standard specifications and as directed by the departmental officers.

Ist Floor

Lintel Beam

Sunshadees

First Floor Roof Beam

Reinforced cement concrete 1: 1 1/2 :3 (One of cement one and half of sand and three of hard broken stone jelly) using 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works excluding cost and fabrication of reinforcement grills.

Column up to Roof top

Plastering with CM 1:5, 12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

tactile flooring

Providing Floor finish with Anti skid tiles of all labour charges ,materials etc

Providing Glazed Wall tiles inclusive of all labour charges ,materials etc

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required design & finished thick. beating the concrete with wooden beaters of approved pattern, keeping the surface contantly wetted with sprinking lime & jaggery water as per standard specifications etc., complete as directed by the departmental officers. Rate for 10m3

Finishing the top of roof with one course of machine pressed tiles of size 23 x 23 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc., complete

Colour Washing Inner area using Distemper over one coat primer including all charges etc complete

Wall Painting two coats Using with approved best quality of Exterior Emulsion paint of approved colour over the Including priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Painting new iron works for doors, windows and Ventilators, Iron bars, Weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with Two coats of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification.

Supply and Fabrication of Steel door size 1.50 x 2.40 m - 2No includining Cost and Conveyance of all Cherges etc complete.MD

Supply and Fabrication of Steel door size 1.20 x 2.40 m - 2No includining Cost and Conveyance of all Cherges etc complete.D1

Supply and Fabrication of Steel door size 1.00 x 2.10 m - 2No includining Cost and Conveyance of all Cherges etc complete.D2

Supply and Fabrication of Steel door size0.75x 2.10 m - 2No includining Cost and Conveyance of all Cherges etc complete.D3

Supply of Fabrication of Steel window size 1.80 x 1.50 m includining Cost and Conveyance of all Cherges etc complete.

Supply of Fabrication of Steel window FW1 size 0.75 x 2.40 m includining Cost and Conveyance of all Cherges etc complete.

Supply of Fabrication of Steel window FW2 size 0.90 x 1.50 m includining Cost and Conveyance of all Cherges etc complete.

Supply of Fabrication ofFixed Window glass includining Cost and Conveyance of all Cherges etc complete.

Supply of Fabrication of Steel Ventilator size 0.750 x 0.60 m - 2 No includining Cost and Conveyance of all Cherges etc complete.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) (SD-25)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..) (SD-26)

Supply & Fixing of Surface & wall mounted 4 feet Regal battern with co extruded polycarbonated body, environmental friendly, energy efficient, suitable for 1 x 18 /22 W LED Tube double grass LED Tube light (double side connection) with very high efficiacy suited for installation on wall & Ceiling with PVC unsheated copper leads from terminals to the fitting (havells/Model : LHLDDAXEUL82018) - Data 1

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. (SD-110)

Supply and fixing of Fancy Glassed & 100 W B22 CDL Ball Lamp / 6500 K for BH (havels Make) Data 2

Supply & Fixing of 1 No. 30 W High power LED Green Line Smart luminaries products have a life span of 40000 burning hours street light fittings with 19mm dia GI pipes (Class B) with 1 No. 19mm GI bend Complete on the existing wall with 16 A aerial fuse unit on MS Plate with PVC unsheated copper leads with MS Clamps & aluminum painting - Data 3

Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box covered with Hylem sheet in flush with wall with earth connection (For Computer Plug Socket) (SD 139)

Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet (SD 138)

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make] (SD 140)

Supply and fixing of DP metal 2 way Enclosure with 32/20 A DPMCB in Flush with wall with earth connection (For Pump Motor Control) Data 4

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD 202)

Supply and Clamping of 2 x 6 sq.mm PVC armoured LTUG cable in a wall or on a Post with MS Clamps (SD 220)

Supply and fixing of brass cable gland for 4 x 25 sq.rnrn LTUG armoured cable with earth connection SD 185

Supply and fixing of 8 way SPNMCB Distributuion Board made out of sheet , Steel / Alumunium rail complete with Bus bar arrangements incorparating the floowing controls & double door arrangments (IP 42 Metal Door of Legrand) in Flush with wall & making good of the Concealed portion with Earth connection 1. 32/20 A DPMCB isolator as incoming - 1 No. , 2. 10 SPMCM as Outgoing - 6 Nos.(MCBDB, Isolator, MCB Should be legrand) (Data - 5)

Supply and Run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge M.S. coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour. Data 6

Supply and fixing of 8 way SPNMCB Distributuion Board made out of sheet , Steel / Alumunium rail complete with Bus bar arrangements incorparating the floowing controls & double door arrangments (IP 42 Metal Door of Legrand) in Flush with wall & making good of the Concealed portion with Earth connection 1. 32/20 A DPMCB isolator as incoming - 1 No. , 20/16 A DPMCB as Outgoing - 3 Nos.(MCBDB, Isolator, MCB Should be legrand) (Data - 7)

Supply and Run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge M.S. coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour. Data 8

Supply and Fixing of 1 No. 32 A 3 Phase Slector Switch with 3 nos indicator in Suitable MS in Flush with wall with 3mm thick Hylem sheet with necessary connections (Data 9)

Supply and Fixing of 4 ways Triple Pole & Neutral MCB Distribution Board made out of Sheet Steel / Aluminium rail complete, with bus bar arrangements incoprating the follwing controls with Double door arrangements (IP 42 Metal Door of Legrand) in Flush with wall & making good of the Concealed portion with Earth connection 1. 40 Amps, 4PMCB isolator as incoming - 1 No. , 2. 20 Amps 4PMCB as Outgoing - 2 Nos, 3. 10 Amps SPMCB as Outgoing - 4 Nos(MCBDB, Isolator, MCB Should be legrand) (Data - 11)

Supply and fixing of 63A TPN MC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 166)

Supply and fixng of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete (SD 129)

Supply and fixing of 3 Phase 63 A Aerial Fuse unit for 3 Numbers 63 Amp Fuse units (500 V) on suitable MS Sheet covered with 6mm Thick Hylem sheet on Suitable angle iron work for tapping pole with necessary materials (Data 12)

Supply and laying of 31/2 X 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD 204)

Supply and laying of 31/2 X 25 sq.mm PVC armoured LTUG cable in a wall or on a Post with MS Clamps (SD 222)

Supply and fixing of brass cable gland for 3 1/2 x 25 sqmm PVC armoured LTUG cable with earth connection (SD 186)

Supply and providing cable end termination of 3 1/2 x 25 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete (SD 235)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 234)

GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

E.SEKAR (BID ID -1328352)