GE/U(N)-72/2020-21 PROVISION OF TILING IN CERTAIN LOCATION / QTRS IN PB ENCLAVE AREA INCLUDING PROVN OF OLD RECORD ROOM NEAR BLDG NO NP 19 IN SUB AREA UNDER AGE B/R-I OF GE (NORTH) UDHAMPUR

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Demolition of un-reinforced lime/cement concrete in ground floors for levelling of and pavings not exceeding 15 cm thickness including floor finish complete all as directed by Engineer - in - Charge.

Dismantling in fillets ,rails, posts,rafters, purline etc under 40 sq.cm in any position complete all as directed by Engineer - in - Charge.

Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil complete all as directed by Engineer - in - Charge.

Excavation in trenches, n.exc. 1.5 m wide and n.exc.1.5 m deep and getting out hard/dense soil complete all as directed by Engineer - in - Charge.

Excavation in trenches, n.exc. 1.5 m wide and n.exc.1.5 m in depth for foundation, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as directed by Engineer - in - Charge.

Returning, filling in trenches, filling under floor including spreading, levelling, watering and well ramming in layers not exc 25 cm back side of wall complete all as directed by Engineer - in - Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed

Aggregate for loose filling, of gauge 80 mm to 150 mm graded complete all as directed by Engineer - in - Charge.

100mm thick for hard core of gauge exc 63 mm but n.exc 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/ rammed to a true surface of Broken stone or boulders complete all as directed by Engineer - in - Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as directed by Engineer - in - Charge.

Description as above do but except brick complete all as directed by Engineer - in - Charge.

Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as directed by Engineer - in - Charge.

Reinforced cement concrete, 1:11/2:3, type A-1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam haunching girders, bressum-mers, lintels cantilevers, shelves including supports,overhangs etc also splays between floors and beams, etc complete all as directed by Engineer - in - Charge.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

TMT steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

50 mm thick plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth production all as specified and as directed.

25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed.

40 mm thick Cement concrete type B-2 , 1:2:4 using 40mm graded aggrigatewithout using extra cement complete all as specified and as directed.

75 mm thick Cement concrete type D-2 , 1:4:8 using 40mm graded aggrigate as in subbase complete all as specified and as directed.

Coloured vitrifired ceramic tiles double charged 10mm thick (square/rectangular) polished , dark shade, area of each tiles exc 0.38 sqm but n.exc 0.64Sq.m (min. size 800mm x 800mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Coloured vitrifired ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.64 Sqm but n.exc 1 Sqm as in skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match including 10 mm screed bed 1:4 cement mortar complete all as directed by Engineer - in - Charge.

Glazed ceramic coloured tiles in vertical surfaces of wall of size 600mm x 300mm x 7 to 8 mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc, complete all as specified and directed.

Wall craft stone finished tiles in vertical surfaces of wall/ wall cladding of size 600mm x 300mm x 8 to 10mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:3 as in skirting, dado, etc, complete all as specified and directed.

Chequered cement concrete tiles 30 cm by 30 cm by 20 mm thick, with grey cement and pigments, set, jointed over 10 mm thick screed bed in CM 1:4, and pointed in neat cement slurry in floors complete all as directed by Engineer - in - Charge.

Plain Cement Concrete Type B0 1:3:6 (using 12.5 mm graded aggregate) as in leveling coarse over walls, bed plats seismic and other similar bands, or chamfered on edges finished even and smooth with using extra cement incl nessary form work required all as specified.

Roof trusses (framed) , trussed , purline, cross gantries and fastening and heavy brakets framing (Beam, tee, angle,channel or flat section,hellow section ) including distance pieces base/gusset plate and ms bolts complete all as specified.

False ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.

105x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified incl filling of pcc (1:3:6) in back recess portion complete all as directed by Engineer - in - Charge.

35 mm thick 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated .

Factory made pressed steel frame steel window/ vent with glazed & gauged shutter (combined with side hung shutters incl box type inges, steel handle, necessary locking arrangement, peg stay complete with one shop coat of zinc chrome primer including PCC (1:3:6) type -0 filling in back side recess profile portion, complete all as specified and directed by Engineer In Charge. Note : Rate quoted are included for wire gauged and glazed window complete & shall be measurred as overall out to out one side only.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to Fe 290 or Gde-E-165, complete all as specified and as directed.

In repairs 0.80 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and ixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred fixed in position all as directed by Engr-in Charge.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as directed by Engineer - in - Charge.

Granite stone slab flooring 16 to 18 mm thick machine cut, rounding edges , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 20mm thick screed bed bedding in CM 1 :4 complete all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel, and fixed in 100 mm complete all as directed by Engineer - in - Charge.

150 mm long Aluminium barrel tower bolts, extruded sectiont ISI marked and fixed complete all as specified and directed .

125 mm long Extruded Aluminium alloy handles, caste type anodised ISI marked complete all as specified and directed .

300 mm long mild steel sliding door bolts, ISI marked clip type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed .

Refixing door shutter of any description exc 1.00 Sqm and not exc 2.00 Sqm each in same opening after taking down,easing and adjusting and also refixing builders hardware as required; complete all as specified and directed.

Preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed .

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and directed by the Engr-in-charge.

Rendering 15 mm thickin cement mortar 1:4 with brick/concrete surfaces, finished even and fair without using extra cement complete all as directed by Engineer - in - Charge.

Rendering 10 mm thick in cement mortor 1:6 other than fair faces of brick work or concrete surfaces complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified.

Two coat of cement base paint over a coat of priming paint over prepared surfaces of newly plastered wall complete all as speficied and as directed.

Preparing new plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer including 1 mm thick exterior wall care putty ( to be applied in two coats) all as specified. Note: Putty surface shall be rubbed with emery paper to form even and smooth surface.

Preparation of old distempered surfaces and applying one coat of oil bound distemper on walls and projections, complete all as specified and as directed.

Two coats of oil bound distember over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed.

18 mm thick Prelaminated MDF Board particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with crews to timber frame work incl 6 mm thick beading around the shutter(Lamination/sunmica shall be measured by separately) complete all as directed by Engineer - in - Charge.

25 mm thick Prelaminated MDF Board particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with crews to timber frame work incl 6 mm thick beading around the shutter(Lamination/sunmica shall be measured by separately) complete all as directed by Engineer - in - Charge.

30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as directed by Engineer - in - Charge.

Aluminium handles, cast type, anodised 100mm long complete all as directed by Engineer - in - Charge.

100 mm Hasp and staple, mild steel, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws complete all as directed by Engineer - in - Charge.

Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as directed by Engineer - in - Charge.

15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed.

Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed

Plastic water closet seat, closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs,complete all as specified and directed

Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified

20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

Single lever wall mixer 3 in 1, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair, complete all as specified and directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.

Hand shower 105mm round shape (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe with hook, fixed in repair complete all as specified and directed.

Shower rose, brass, chromium plated, 105mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed.

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed.

CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.

CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.

Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as directed by Engineer - in - Charge.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with PVC clamps, all as specified and directed by the Engr-in-charge.

110 mm bore PVC (SWR) bends, all as specified and directed by the Engr-in-charge.

Taking down copper/aluminium point wiring (light fan socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors, etc. all as specified and as directed by engineer in charge.

Point wiring with PVC insulated unsheathed, HRFR 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less tham 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and brass screws, cap washers etc. or to be fixed on wall respectively including white washing / colour washing / distembering to match the disturbed surfaces as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded / solid copper conductor cable of size 1.5 Sqmm.(Cutting chases for counduits shall be measured and paid separately) complete all as directed by Engineer - in - Charge.

All as per item No 85 above but wire size 2x2.5 Sqmm and and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm. to controlled the 3 pin 5 / 15 Amps socket outlet on independent board.

All as per item No 85 above but for one 3/5 pin socket 5 Amp on independent board with cable1.5sqmm size.

Point wiring with 1.5 Sq. mm copper conductor, single core, PVC sheathed, cable, to controle one 3 pin socket outlet, 5 Amps on the same board with other switch.

Switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Switch Piano, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Two in one, 3 Pin, 5/15 Amps, flush type socket outlet suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

Switch socket combination 2 in 1, 3 Pin, 5 and 15 Amp flush type universal complete all as directed by Engineer - in - Charge.

Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as directed by Engineer - in - Charge.

Two in one, 3 Pin, 5 Amps, flush type socket outlet complete all as directed by Engineer- in - Charge.

Decorative ultra slim square profile LED lighting fixture 05 Watt with extruded polycarbonate, environmental friendly, energy efficient ready to use pack all as specified and as directed by engineer incharge of Make : Havells Cat No : LHEXBTP7IN1W005 or equivallent in above specifications make as approved by Accepting Officer

Slim linear LED lighting fixture 18/20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 36/40W and taken in schedule of credit all as per the direction of Engr-in-Charge. Make -Make model of Havells cat No LHEXCEP7UN1W020 or equivallent in above specifications make as approved by Accepting Officer

Decorative ultra slim linear Aluminium Extruded LED lighting fixture 10 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceilingrose to fitting complete all as per directed by Engr-in-charge. Make:Havells: Cat No: LUMILINEPLUSBS10WLED865SPCSS or equivallent in above specifications make as approved by Accepting Officer

Wiring for circuit / Submain Wiring in and including no metalic PVC concealed conduit not less than 25 mm dia with 2 x 4 Sq.mm main wire and 1 x 4 Sq.mm earth wire of FR, PVC insulated copper conductor, single core cable complete all as directed by Engineer - in - Charge.

Submain wiring with 2X6.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement including taking down old us submain wiringand direction by EIC, all accessories complete all as specified and directed.

Replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways complete all as directed by Engineer - in - Charge.

Single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways complete all as directed by Engineer - in - Charge.

Supply fixing connection and testing MCB SP6-32, 10kA Amps complete all as directed by Engineer - in - Charge.

S&F 'C' series SPN MCB 40 Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc.

25 Ltrs capacity geyser Vertical type suitable to operate in Single phase AC supply,240 volts 50 Hz including provision of grouting for suitable size of nut bolts all as specified and directed by engineer in charge

PVC Hot and cold pipe with Check nuts and washer 300 mm long all as directed

Pre-printed galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and coating AZ-70 as in roof covering/cladding to roof, fixed with self tapping screws complete, all as specified. Make : JSW colouron /Kamdhenu or equivalent make as per PS clause.

Pre-printed galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

DURGA CONSTRUCTION CO

TULSI RAINA AND SONS

kerni electricals

takashdeep traders

NAVIN KUMAR