COMPREHENSIVE B/R REPAIR WORK PLASTERING, TILING, SANITARY FITTING AND OTHER CONNECTED WORKS IN SOUTH AREA UNDER GE NASIRABAD

Amount

Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n.exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed by Engr-in-Charge.

M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed by Engr-in-Charge.

All as per item No. 9.00 here in before but except stone complete all as specified and directed by Engr-in-Charge.

M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. Note:- WPC measured and paid separately.

Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed by Engr-in-Charge.

M&L for rough cast plaster over 15mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed by Engr-in-Charge.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

All as per item No.17.00 above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota sotne slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota sotne slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed by Engr-in-Charge.

M&L for mirror polishing on existing granite/Kota stone/stone work where ever required to give high gloss finish complete all as specified and directed by Engr-in-Charge.

M&L RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings, Chajjas and platform etc. including form work, complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in cover slabs, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.

M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) including rounding to edges of stone slab complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed by Engr-in-Charge.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 25mm dia mild steel chromium plated curtain rod and decorative type knobs and curtain rod bracket with chromium plated U shaped support clamp suitable for 25mm dia rod complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed by Engr-in-Charge.

S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed by Engr-in-Charge.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed by Engr-in-Charge.

S&F 25mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed by Engr-in-Charge.

Re-fixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed by Engr-in-Charge.

Re-fixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed by Engr-in-Charge.

Re-fixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed by Engr-in-Charge.

S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

S&F in repair CP brass shower rose (4'' overhead ABS) with 225mm CP brass arm and flange complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed by Engr-in-Charge.

S&F in repair wash hand basins vitreous china, coloured flat back size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection, heavy duty 15mm bore, 60cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair pillar tap, cast copper alloy chromium plated screwed down high, pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore stop valves (concealed), chromium plated cast copper alloy,with long shank and cap (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work such as grills, grating cooler stands, water tank staging etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous China "Orissa pattern" size 580 x 440mm" white, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including seat cover and connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, floor etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china urnials half stall type incl connecting pipe, spreader, flushing valve and flush/waste pipe fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed by Engineer-in-Charge (Make : Prayag or eqvt). (Cat No. 555)

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed by Engr-in-Charge.

Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed by Engr-in-Charge. (Nota:- Measured over all as fixed along the centre line over the fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality complete all as specified and directed by Engr-in-Charge.

M&L for sand filling under floor in foundations inclding watering and consolidation complete all as specified and directed by Engr-in-Charge.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m all as specified and as directed by the Engineer-in-Charge.

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor/path with grey cement and no pigment laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3 mm thick figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty/glazing clips in square exc 0.5 Sqm.m in each pane complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall putty, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for newly plastered surfaces of wall / Jalli and two coats of cement base paint over one coat of cement based primer on plastered/ concrete surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M & L for newly rough cast plastered surfaces of wall and applying two coats of weather proof acrylic emulsion paint over a coat of primer, complete all as specified and directed by Engr-in-Charge. MAKE :- ASIAN/APEX/BERGER (Weather coat all guard)

M & L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of oil bound distemper over & including 1mm thick finished coat of white wall care white putty (JK/Birla), complete all as specified and directed by Engr-in-Charge.

Dismantling old wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets and Suply & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,complete all as specified and as directed.

S & F in repairs 5-8mm thick PVC wall cladding hollow cored and a tongue and grooved edge fixed with screw incl required PVC cleat at edges and at corner complete all as per manufacturer instruction and directed by Engr-In-Charge.

M & L for precast cement concrete (1:2:4) type B-0 using 12.50mm graded aggregate, Jalli 35mm thick including all mouldings set in CM (1:4) complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed by Engr-in-Charge.

S&F in repair rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed by Engr-in-Charge. by Engr-in-Charge.

Taking down carefully by unscrewing from boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store ( To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed by Engr-in-Charge. by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following :-

All as per Item No 94.00 above but One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 94.00 above but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 94.00 above but One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 94.00 above but One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 94.04 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including PVC casing & caping with all PVC casing caping accessories and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following:-

All as per Item No 96.00 above but One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 96.00 above but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 96.00 above but One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 96.00 above but One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 96.00 above but with 2.5 Sqmm single core multistranded unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed by Engr-in-Charge for following:-

All as per Item No 98.00 above but One light point/bell point controlled by one way 5 Amps single pole switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 98.00 above but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 98.00 above but One 5 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 98.00 above but One 5 Pin 5 Amps socket outlet on independent board with other switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 98.00 above but One light point controlled by two, 2-way switches complete all as specified and directed by Engr-in-Charge.

All as per Item No 98.04 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

S&F of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed by Engr-in-Charge.

S&F of switch piano flush type, 5 Amp , 240 volt , single pole, two way switch, complete all as specified and directed by Engr-in-Charge.

S&F of switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed by Engr-in-Charge.

S&F of switch bell push, flush type, 5 Amp, complete all as specified and directed by Engr-in-Charge.

S&F of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed by Engr-in-Charge.

S&F of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all as specified and directed by Engr-in-Charge.

S&F stepped type ( switch type) electronic ceiling fan regulator flush type, AC, 230 volts , complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 2 way 6 Amp, 1 module complete all as specified and directed by Engr-in-Charge.

S&F of modular bell push, 6 Amp, 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S&F of mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed by Engr-in-Charge.

S&F of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed by Engr-in-Charge.

S&F of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed by Engr-in-Charge.

S&F of lamp holder PVC / polycarbonate type with back plate complete all as specified and directed by Engr-in-Charge.

Fixing only boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store ( To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed by Engr-in-Charge.

TANISHQ ENTERPRISES