Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹23.9 L+₹3.1 L (14.7%)Rejected-Finance 72 5 53 PIPE ROAD PO BARRACKPORE DIST 24 PARGANAS NORTH PIN 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹24.4 L+₹3.6 L (17.4%)Rejected-Finance 50 CHAURASIS KUNJ PURANA QUILA LUCKNOW 226001 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226001 | L3 | Rejected-Finance Being L3 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
17 Aug 2023, 6:00 pmClosed
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
Repair to various wooden and steel furniture at Varanasi Cantt under GE (East) Prayagraj.
2023_MES_609709_1
8651/E8
Open Tender
Civil Works
Item Rate
270 days
Varanasi
As Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Prayagraj
₹60,000
Yes
7 Oct 2023
19 Jul 2023
19 Aug 2023
19 Jul 2023
17 Aug 2023
3 Aug 2023
Amount
Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully with out disturbing the adjoining parts and Supply & Fixing new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges, denting, placing every part in-tact, as applicable as per drgs. B) Work will be executed where the furniture exist in different User's Units of GE (East) Prayagraj including BSO's Furniture Yard as directed by Engineer-in-Charge.
Table Office Officer Steel [FD-84/1003]
Legs, as per drg
Lock of drawer as per drg.
Repair to drawer/shutter by replacing of old u/s parts with new parts including denting, welding etc all as shown on drawing and as directed by Engineer-in-Charge.
Stiffeners made with MS tube of existing size and exisitng length as per drg as directed by EIC
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Welding the joints of legs/ square tube as per drg and wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Top made with 18 mm thick BWP grade plywood with 1.0mm thick laminate in colour or shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed on four sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Table Office Clerk Steel [FD-84 / 381 FD-1004]
Legs, as per drg
Lock of drawer as per drg
Repair to drawer/shutter by replacing of old unserviceable parts with new parts including tinkering/denting, welding etc all as shown on drawing and as directed by Engineer-in-Charge.
Stiffeners made with MS tube of existing size and exisitng length as per drg as directed by EIC
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Welding the joints of legs/ square tube as per drg and wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Top made with 18 mm thick BWP grade plywood duly post-formed with 1.0 mm thick laminate in colour or shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed on all four sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Almirah Large Steel : FD-67/1031/TP/MAP
Brass/Steel 6 lever lock as per drg.
CP Handle as per drg
Legs as per drg
Repairs / adjustment to door by denting as required & as specified including replacement of hinges.
Repair / adjustment to existing shelf including welding as per drg
Door shutter of Almirah as per drg.
Shelf of Almirah as per drg.
Almirah Medium / Small Steel : FD-1032/FD-104(m)
Brass/Steel 6 lever locks as per drg.
CP Handle as per drg
Legs made with 1.00 mm thick MS sheet as per drg
Repairs / adjustment to door by denting as required & as specified including replacement of hinges
Repair / adjustment to existing shelf including welding as per drg
Door shutter of Almirah as per drg.
Shelf of Almirah as per drg.
Teapoy Verandah FD : 383 / 255
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Top shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
MS Flat iron/ conduit member of required section fixed with screws as per drg.
Table Steel 900 mm x 600 mm with and with out drawer & Table 900 mm x 900 mm FD-1007/1008/1009
Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Top for table 3X2 shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Top for table 3X3 shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Repair to drawer by replacing of old u/s parts with new parts including denting, welding etc all as shown on drawing and as directed by Engineer-in-Charge.
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Lock of drawer as per drg
Chair Steel Tubular with arms [FD-75(m)]
Second class Hard wood seat frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg
Second class Hard wood back frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg
PVC Arm rest as directed by EIC
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Rubber cap for conduit pipe as per drg
Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Chair Steel Tubular without arms [FD-75(m)]
Second class Hard wood seat frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg
Second class Hard wood back frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Rubber cap for conduit pipe as per drg.
Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Chair Verandah : FD-19, FD-256, FD-359/MAP/11/MAP-II/15
Conduit section any member of MS conduit pipe 16G, 19mm dia as per drg.
Welding joints of leg of 19/20mm MS tube and wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Removing of old unserviceable cane from chair verandah & recaning the chairs verandh with approved new white colour or as approved colour plastic cane 4 mm wide half round as per Matt Pattern complete all as specified & directed.(colour of cane shall approved by EIC/GE)
Locker Steel : FD-1029/257/SKD-562
CP Handle as per drg
Stainless steel hasp staple of as per exisitng size fixed with screws rest as per drg
Repairs to door/sides including replacement of hinges
Door/ shutter as per drg.
Legs as per drg
CP Conduit pipe as per drg
Shelf of locker as per drg.
Brass/Steel 6 lever lock as per drg.
Drawer complete including fixing as per drg.
Charpoy IP Ply Top FD/MAP-II/01
12 mm thick plywood top BWP grade of as per existing shape and size with 8 Nos shunken nut & bolts of appropriate size hole shall be made with electric drill machine complete rest all as drg and as directed
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Welding of joints wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Chair Computer / Revolving TP [FD/E6/MAP/01 &TP]
Supply & fixing new seat made of 12mm thick hot pressed plywood with fabric poly proplene / acrylic (range of cloths or fabrics not less than Rs. 300.00 per Sqm) and mouled polyurethane foam 40 density with PVC lipping all round seat, fixed with clips complete all as shown on drawing.
Ditto ---- all as above but back of chair complete.
PU arms fixed with screws as per drg
Complete pedestal assembly standard quality complete all as per drg & directed.
Supply & fixing new twin wheel castors of required dia fixed with screw in chairs complete as directed.
Supply & fixing new chrome free cylinder tube shall be fixed complete all as per drg and as directed.
Supply & fixing new Locking lever assembely as shown in drawing complete all as directed.
Charpoy GI pipe ply top FD-220
7 X 3 X 12 mm thick plywood top BWP grade with teak wood half round bead as per existing shape and size with shunken nut/bolts as required ,appropriate hole shall be made with drill machine complete rest all as drg and as directed
25mm mild steel square tube 20 cm long not less than 16 gauge thick each welded to GI Charpoy pipe in four corner to support. Duly painted complete all as specified and directed.
S&F stiffener in replacement of 25 mm mild steel square tube 80 cm long not less than 16 Gauge in thickness each welded to GI Charpoy pipe complete all as specified and directed.
S&F in replacemet of long rail of 32 mm dia Medium grade GI pipes ISI Marked all as specified and shown on drg complete all as specified and directed.
Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 14.04 here in before.
Replacement of unservicable legs from charpoy GI pipe 32mm dia but "except pipe" including cutting threading etc as required and directed with bottom plug made of Sal wood and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed. Note : Pipe obtained from ser item No 14.04 & 14.05 above shall be used for this items.
S&F in replacement of GI 3 way elbow 32 mm dia complete all as specified and directed.
S&F in replacement of 32mm check nuts complete all as specified and directed.
Welding work wherever required as directed by EIC
Replacement of old us Nylon newar from Charpoy GI Pipe, tightening of loose components of complete charpoy and S&F new plywood top 12 mm thick BWP grade ISI marked of required size fixed with mild steel galvanised iron nuts and bolts of required size and suitable length, 12 mm x 6mm thick 1st class teak wood beading half round along with the edges of the plywood and round at corner fixed with fevicol and headless nails, S&F three dtiffeners 900 mm long made out of MS flat iron, 40x5 mm duly painted with two coat of black colour synthetic enamel paint over a one coat of red oxide primer to be fixed over the long rails by drilling holes in flat iron and long rail by two nos of semi circular top of 6mm dia 65mm long nut and bolts. 10 nos Nut and bolts with semi cirular top of 6mm dia and 65mm long with steel washers to be used (03 nos at each long rail, 02 nos at each short rail) and 06 nos nuts and bolts with semi circular top of 4 mm dia and 35 mm long with steel washers to be used (02 nos at each flat iron in between long rail) for fixing of plywood top complete all as directed by Engineer-in-Charge.
Charpoy IP Folding FD-388(R)
12 mm thick plywood top BWP grade as per existing shape and size with 10 Nos shunken nut/ bolts of appropriate size hole shall be made with drill machine complete rest all as drg and as directed
Circular pipe/ flat iron as required
PVC hard rubber shoe standard quality fixed with screws on each legs as per drg
Welding of joints wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.
Table Dinning OR A/top FD-165(M)
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly fixed with 1mm stainless steel to be fixed as table top all as specified and directed by EIC/GE.
Leg/Stiffner/short rail of MS 25mm square tube of 1.6mm thick complete all as specified and directed.
Long Rail/middle support complete all as specified and shown on drg and as directed.
Chair Writing FD/E6/MAP/12 & TP
Taking out old/unserviciable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric (range not less than 300/RM) and mouled polyurethene foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing.
Ditto ---- all as above but back of chair complete.
Arm rest of chair writing steel & supply & fixing new PU arm rest as per drg
Preparation of old painted surface by scraping & rubbing and Powder coating of complete frame before fitting of above parts as per drg.
Taking out unserviceable/broken frame and S&F new cantilever type MS tublar frame powder coated made out of 25x10mm sec as per drg.
Welding work wherever required as directed by EIC
A) M&L for hammertone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally for item Sl No. 19 to 34 and for rest of item shall be painted two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of GE(East) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge
Almirah Steel Medium [FD-1032 ]
Almirah Steel Large [FD-67/351]
Book Case Steel [FD-1028]
Charpoy IP Hard Top [FD/MAP-II/01]
Chair Steel Tubular with and without arms [FD-75(m)]
Chair Verandah [FD-19/256]
Locker Steel [FD-1029/257/127]
Table Office Officer Steel [FD-84/1003]
Table Office Clerk Steel [FD-84 / 381 FD-1004]
Teapoy Verandah FD : 383 / 255
Table 3x2 with and w/o drawer & Table 3'x3' [FD-1007/1008]
Charpoy IP folding [FD-388 (R)]
Rack steel any type / Book Shelf open large [FD-1038 & 1023/69]
Table dinning OR A/top [FD-165(m)]
Rack Shoe Steel [FD- FD/E6/MAP/02]
Trestle Store room Iron [FD- 1043]
A) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed where the furniture exist in different User Units/Md accns of GE (East) Prayagraj including BSO's Furniture Yard as directed by Engineer-in-Charge. C) Timber shall be of 1st class teak wood seasoned.
FD-55/284/283 or simillar for Table 3'X2' with / without Drawer
Top shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Legs as per drg
Top long rail as per drg
Top Short rail as per drg
Center Stiffener as directed
Short stiffener as per drg
Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE with 2 mm thick teakwood beading in front, sides/back shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) complete. Rest all as per drg.
Fancy Knob CP as per sample held in yard.
Wooden corners to be provided all as directed by EIC/GE.
PVC shoe as per sample.
FD-273, 30 or similar type/MAP Drg for Table Dining 4/6/8 Persons
Top for 4 pers table shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Top for 6 pers table shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Top for 8 pers table shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Wooden corners to be provided all as directed by EIC/GE.
Top long rail as per drg
Top short rail as per drg
Legs as per drg
Stiffener between long rails
PVC shoe as per sample.
FD-33, 275, DB-3982 or similar type for Table writing
Top shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Legs as per drg
Foot rest as per drg
Stiffener side as per drg
Complete Cabinet box with partition shall be of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and duco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg.
Cabinet door made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. Lock and CP Handle 3" be provided in Cabinet all as directed by GE/EIC and as per drg.
12 mm thick Back ply BWP grade as per drg.
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel and CP Handle 3" be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
PVC shoe as per sample.
Drg No. FD-32, 251, DB-3180 for Table Dressing Ladies
Frame assembly along with Mirrorr 5mm thick & 6 mm thick Back ply BWP grade as per drg.
Complete Cabinet box with partition with 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg.
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel and CP Handle 3" be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
Both Plain glass with roller and slider as per drg.
12 mm thick back ply BWP grade of table dressing box as per drg.
Base frame of teak wood as per drg.
Drg No. FD/MAP-II/07 for Stool Dressing with Cushion
Cushion complete with 40 density , removable type with upholstery of tapestry cloth of range not less than Rs. 450/metre (as per sample kept in BSO) colour and shade & quality approved by GE.
Legs as per drg.
Top rail as per drg.
Top short rail as per drg
Wooden corners
Drg No. FD-277/ 384, DB-3973 for Peg Table
Top shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Legs as per drg.
Top rail/Bottom Rail rail as per drg irrespective of drg.
20x40 mm top short rail to be provided irrespective of drg.
20x40 mm stiffener between bottom rail to be provided irrespective of drg.
PVC shoe as per sample.
Drg No. FD-276/248 for Table Bed Side
6 mm thick back ply BWP grade shall be used as per shape and size shown in drg.
Top/bottom/Shelf made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg.
Sides made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg.
PVC shoe as per sample.
Drg No. FD-274 / 235 for Table Centre
Top shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Legs as per drg.
Top rail/stiffener as per drg
Bottom rail as per drg.
20x50 mm top short rail to be provided irrespective of drg.
20x50 mm stiffener between bottom rail to be provided irrespective of drg.
Wooden corners to be provided all as directed by EIC/GE irrespective of drg.
PVC shoe as per sample.
Drg No. FD-26/241 for Side Board
Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg.
Cabinet door made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock be provided in Cabinet all as directed by GE/EIC and as per drg.
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel and CP Handle be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg.
Drg No. FD-278, 34, 382 for Teapoy
Top shall be made of 18 mm BWP grade plywood with 1.0 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete and other side with balancing white sunmica, rest all as per drg.
Legs as per drg.
Top rail/stiffener as per drg
Bottom rail as per drg.
20x50 mm top short rail to be provided irrespective of drg.
20x50 mm stiffener between bottom rail to be provided irrespective of drg.
Wooden corners to be provided all as directed by EIC/GE irrespective of drg.
PVC shoe as per sample.
Drg No. FD-246/247 for Bed Ply top
Teak face ply 3.5/4 mm thick on head rest/foot rest with half round teak wood beading complete as per drg
Long rail as per drg
Ply top 12 mm thick BWP Grade rest complete all as per drg.
Head rest complete as per drg
Foot rest complete as per drg
Stiffner as per drg
Wooden corners to be provided all as directed by EIC/GE
Drg No. FD-281/373/MAP drg for Sofa set 4/5 seater
Legs/side rails as drg
Arms as per drg
Front rails/back rail for Three Seater as per drg
Front rails/back rail for One Seater as per drg
Bearer/Batten as drg
Back frame top/bottom for Three Seater as per drg
Back frame top/bottom/sides for One Seater as per drg
Cushion complete with 40 dennsity PU foam of size 560 X 530 X 110mm with upholstery of tapestry cloth of range not less than Rs. 450/metre (Sample kept in BSO Office) colour and shade & quality and providing a chain of best quality (on either of 21" side) of make YKK with two runners at both ends as approved by GE.
Cushion cover of tapestry cloth of range not less than Rs. 450/mtr quality and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends as approved by GE.
Drg No. FD-279/16/250 for Chairs Dinning
Rear legs as per drg
Front Leg as per drg
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Back strip as per drg
M & L for Re-canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.
Drg No. FD-285 for Chairs Wooden Bottom
Rear legs as per drg
Front Leg as per drg
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Back strip as per drg
Ply wood BWP grade as per drg.
Drg No. FD/MAP-II/04 or similar for Chairs Dining Officers
Rear legs as per drg
Front Leg as per drg
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Back strip as per drg
Replacement of u/s plywood for seat with new one 12mm S&F PU foam cushion with 40 Density with Tapestry cloth as approved by EIC/GE of rate not less than Rs 450/RM complete as per Drg and as directed by EIC.
Drg No. FD-20, 202, 250, 280 for Chair Writing
Rear legs as per drg
Front Leg as per drg
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Arm rest as per drg
Back strip as per drg
Re-canning of Chair writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.
Drg No. FD-229/ 201/17 for Chair Easy
Rear legs as per drg
Front Leg as per drg.
Seating/back Frame members front, back,side rail as per drg.
Arm rest as per drg.
Re-canning seat of Chair easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.
Re-canning back of Chair easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.
TP for Sofa Set 5 Seater:- Taking down old cushion and tapestry/rexene and re-upholstery of Sofa complete by tightening of frame with removal of unserviceable wooden parts/legs and S&F new springs best quality/Cushion 50 density and with rexene superior quality as approved by EIC/GE (sample kept in BSO yard) of rate not less than Rs 600/RM all as specified and directed by EIC. Sofa will be fully covered and leg base shall be provided of round steel as approved.
A) M&L for melamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (East) Prayagraj including BSO's Furniture Yard as directed by Engineer-in-Charge.
Almirah Medium/large All Types Drg No. DB-3951/4042/ 4047
Bed Plywood Top Drg No. FD-246/247
Chair Dining Drg No. FD-279/16/250
Chair WB Drg No. FD-285
Chair Dining Officers Drg No. FD/MAP-II/04/FD/MAP-II/10
Chair Writing Drg No. FFD-20,202,250,280
Chair easy Drg No. FD-229/ 201/17
Peg table Drg No. FD-284/277/230 DB-3972
Side board Drg No. FD-226/241
Sofa Set 5 seater Drg No. FD-281 /373/258
Table dining 4/6/8 pers Drg No. FD-30/239 /273/139/289
Table 900x600mm with & without Drawer/ Table 900x900mm Drg No. FD-42/ 55/ 41/ 223/ 224/ 231/ 284/ 283/ 291/ 293
Table centre Drg No. FD-235/274 DB-3973
Table dressing ladies Drg No. FD-251
Table wrtiting Drg No. FD-275/DB-3982
Teapoy Drg No. FD-232/278/34 DB-4069
Table Bed Side Drg No. FD-276/248
PIONEER
HALLIOX ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .