ADDN ALTN TO COOK HOUSE, DINNING HALL, BATHROOM AND TOILET BLOCK AT MIL STN BIKANER UNDER GE N BIKANER

Amount

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Demolition reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement, laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 grade and sand 1:3 by weight complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Non skid coloured ceramic tiles area exc 0.18 sqm but not exc 0.38 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

Ditto all as above item- 5 but as in skirting/dado over and incl 10mm thick rendering in CM 1:4 all as specified and as directed.

M&L for Non skid coloured ceramic tiles area exc 0.11 sqm but not exc 0.18 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick screed bed in CM 1:4.complete all as specified and as directed by Engineer-in-Charge.

M&L for 25mm thick cement concrete 1:2:4 type BO using 12.5mm graded stone aggregate in floors to receive finished even and smooth using extra cement complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar

M & L for Granite (of any type) work 18 -20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed bed(bedding layer) in CM1:4 with cement slurry @3kg/sqm complete all as specified and directed by Engineer in Charge.

Demolation of cement concrete(reinforced)in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified.

M & L for 10 mm thick screeding in cement mortar 1:4 on concrete surfaces, finished fair & even including mixing water proofing compound as per manufacturer's instructions complete. (WPC shall be measured separately as supply only) all as specified.

M&L RCC type B1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like in chajja repairs all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooing for columns,hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips quality conforming to complete as specified.

S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in replacement Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs for 15 mm bore chromium plated concealed stop cock in half/full screwed down high pressure, with capstan head, screwed both ends for iron pipe or for union complete all as specified & directed.

S & F as in repair, 15 mm bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection complete all as specified.

S & F as in repair, 15 mm pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S & F for Shower rose, round type brass, chromium plated, 140mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete.

S & F tubular towel rails, brass, chromium plated, heavy duty, D-type, 20mm dia & 60cm long between flanges fixed in repair complete all as specified.

S&F in repairs Soap dish, vitreous China white/CP, approximate size 160x 160x90mm all as directed by Engineer in Charge.

S & F as in repair, PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete. Make: Prayag/Polytuf or equivalent as approved by Engr-in-Charge.

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

Taking down or up, 25 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified.

Cutting holes in brick walls in cement mortar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting exc 10cm and not exc 20 cm girth in brick walls, complete all as specified & as directed.

Disconnecting exiting tanks exc 500ltrs and nexc1000 ltrs , etting aside (or lowering if required)for repairs,cleaning,etc,and hoisting if required reconnecting and refixing in position incl cleanig and replacement of float valve if requiredcomplte all as specified and directed by Engineer-in-charge.

Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified. Notes :- (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.

Rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified. Notes :- (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.

Dismantling Rotational Moulded polyethyelene water storage tank of capacity ecx 250lit but not exc 500ltr complete all as sp[ecified and as directed by Engineer-in-charge.

Dismantling Rotational Moulded polyethyelene water storage tank of capacity ecx 500lit but not exc 1000ltr complete all as sp[ecified and as directed by Engineer-in-charge.

S & F 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/40mm- 690 gms/50mm-1240 gms) all as specified.

S & F stop valve cast copper alloy with crutch or butterfly handle scerwed both ends and crewed for iron pipe of 20 mm dia fixed in repair complete all as specified & directed.

S & F in repair gun metal glob or gate valve with iron wheel head , crewed for iron pipe of 20 mm dia fixed in repair complete all as specified & directed.

S&F in repairs 25mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & as directed.

S&F PVC (SWR) vent cowl, 75mm bore complete.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edges such as in steps, cooking platform and other similar situations complete all as specified.

M & L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in fixing Holdfast, Plinth courses, bed plates, string courses, coping, filling of chowkhats etc., complete all as specified and as directed by Engr-in-Charge.

S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats.

S&F Second class hard wood,Glazed and skeleton shutters 30 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing gauze etc,size of members as directed supplied and fitted to chowkats.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rain & bottom rail paneling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement all as specified.

S&F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs complete all as specified.

S&F 150mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked. complete all as specified.

S&F 150mm size mild steel, stove enamelled black, pressed handles, oval type complete all as specified.

S&F for 100mm size butt hinges,medium weight cold rolledmild steel complete all as specified.

S & F for 100 mm long Aluminium anodised Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

S & F for 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified.

S & F for 150 mm size aluminium handles, cast type, anodised complete all as specified.

S&F in repair stainless steel peg set of 6 hooks each complete all as directed.

S & F for 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified.

S&F 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate, welded to steel frame, including making suitable cut out in wall and making good in CM 1:4 complete all as specified & as directed.

S&F in repairs mild steel chromium plated tubular curtain/drapery rod 20mm dia with & including pair of projecting type fancy mild steel chromium plated brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed.

S&F factory fabricated pressed steel frame/box windows, ventilators with glazed and fly proof shutters provided to size and dimension as specified & shown on drawing No BTD-888R Sheet No 1/5 to 5/5 & BTD-889 Sheet No 1/4 to 4/4 or as directed by GE with & including MS grills, MS fillets, pintol hinges, tower bolts, MS handles, peg stays, MS lugs, locking arrangement, dash through bolt where required, etc complete all as specified and as directed. Notes: -(i) PCC for filling in frames, glass, wire gauge and painting shall be measured & paid in separately under respective items. Provision of all other items as shown & specified on drawings shall deemed to be include in provision of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in PCC 1:2:4 type B-0 using 12.5 mm graded stone crushed stone aggregate and CM (1:3)

Hacking out old broken glass any thickness,size,quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete.

S&F 4mm thick Figured glass, pin head type and glazing with beads (either supplied with shutters or to be measured separately as supply only) in squares not exceeding 0.5 Sqm in each pane complete.

Demolition of brick work or stone boulder masonary of any description in and any position built in cement mortar or cement lime mortar complete.

M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with subclass ‘B’ burnt bricks, old size straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed. Note : Brick work under this item shall be carried out in sewage disposal work i.e. manholes.

Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified.

Demolition of lime concrete of any description over roof slab complete.

M&L for 10mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instruction. (Note :- Water proofing compound shall be measured and paid separately)

M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminious primer @0.40 litre/sqm and provide a layer of APP based polymeric membrane minium weighing 3kg/sqm and minimum thick, reinforced with polyster non wovenfabric (weighing not less than 150gms/sqm) laid on primed surface complete all as described in para 11.44 of SSRPart-1,complete all as specified and as directed. NOTE: the net area of water proofing treatment shall be measured without any extra allowance for laps.

Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified.

S&F 150 micron polyethylene sheet supplied and fixed complete all as specified and as directed by Engineer-in-Charge

M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.

M&L for 40 mm thick burnt clay brick tiles bedded on cement mortar and joints grouted flush in cement and sand mortar (1:3) mixed with integral water proofing compund IS 2645:2003 @3% by wt of cement as complete all as specified and as directed.

Ditto complete all as per Item no 88 above but except tiles complete all as specified.

M& L for Flush pointing to 30cm by 15cm brick tiles, laid flat in pavings in 1:3 cement mortar complete all as specified and directed by Engineer in Charge.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edge including necessary form work complete.

Dismantling structural steel work including door gates and railing but excluding framed truss complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep in foundations or for walls of manholes / UG cable etc not exc 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes, 150mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.

Supplying and laying of Reinforced concrete class NP2 pipes 150 mm dia laid and jointed complete with collars laid in trences or floors complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 Cm thick in soft/loose soil.

Removal of excavated soil to a distance n. exc 50M and deposited where directed at a level n. exc 1.5 M above the starting point.

M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, Kitchen Platform, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:4) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately.

Dismantling of Cast iron or reinforced concrete or PVC (SWR) drain pipes of internal dia 100mm and less, jointed in cement mortar and taking out of trenches if required demolition of cast iron / asbestos cement drain pipes in cement mortar complete all as specified and directed.

Dismantling of Cast iron or reinforced concrete or PVC (SWR) drain pipes of internal dia 75mm and less, jointed in cement mortar and taking out of trenches if required demolition of cast iron / asbestos cement drain pipes in cement mortar complete all as specified and directed.

Supply and fixing 100 mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors, fixed in repairs, complete all as specified and as directed.

S & F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls with & including fixing clamps complete all as specified and as directed.

Ditto all as per item no-103 above but except pipes

Supply and fixing 75 mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors , complete all as specified and as directed.

Supply and fixing 75 mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in fixewd to walls , complete all as specified and as directed.

S&F 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.

S&F 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.

S&F in repairs 75mm bore CI bends (any radius),diminishing pieces or tapers (large bore measured) with ovel access door complete all as specified.

S&F in repairs 75mm bore CI bends (any radius),diminishing pieces or tapers (large bore measured) without ovel access door complete all as specified.

S&F in repairs 100mm bore CI bends (any radius),diminishing pieces or tapers (large bore measured) with ovel access door complete all as specified.

S&F in repairs 100mm bore CI bends (any radius),diminishing pieces or tapers (large bore measured) without ovel access door complete all as specified.

S&F in repairs 100mm bore CI tee (any radius),diminishing pieces or tapers (large bore measured) with oval access door complete all as specified.

S&F in repairs,100mm CI bends (any radius) with duck's foot or heel rest complete all as specified.

S&F as in repairs,100mm cast iron sanitary connection socket in fit WC out-let complete all as specified.

S&F for cast iron vent cowls 100mm dia complete all as specified.

S&F in repairs cast iron floor trap of 75 mm bore, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4), complete all as specified & as directed.

S&F in repairs cast iron floor trap of 100 mm bore, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4), complete all as specified & as directed.

S&F 100 mm bore Cast iron Bends or elbows, square, or obtuse complete all as specified.

S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

S&F stack clamps for 75mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.

M&L for complete removal of existing treatment on ceiling and applying two coats of white wash on walls all as specified and directed

M&L Rendering 15 mm thick cement plaster on concrete solid block/brick walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement complete all as specified and as directed. Note :- Integral water proofing liquid will be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for two coat of cement base paint over a coat of primer as per manufacturer's instructions incl preparation of newly plaster surface complete all as specified.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint on walls complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for preparation on newly plastered surface of wall for painting and applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces by complete removal of existing treatment of walls incl pillars etc.by mechanical equipment like electric wall sander and applyingtwo coats of oil bound distemper using rollers over a coat of primer incl two coats/layer of wall care putty complete all as specified and as directed by Engr-In-Charge.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and as directed.

Removing building material etc.(other than spoils payable under iteams above in Section 3- Earthwork) to a distance 5 km or under,beyond the lead included in the rates,including loading,unloading and stacking at the destination all as specified.

M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @2.25 liters per linear metre including drilling and plugging holes etc,in apron complete all as specified & as directed.

M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (I cement :2 coarse sand)to match the existing floors complete all as specified &as directed.

S&F salt glazed stone ware drain pipes of 150mm bore,class 'SP 2' ISI marked,laid to slope in trenches,jointed in CM (1:1) and ested complete all as specified $ as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.

Forming jambs,etc.in CM 1:4 to openings (to foregoing item),with stone including cutting,toothings and properly bonding into old work,including facing and pointing (if necessary)to match existing work complete.

Dismantling boarding, any description, fixed in any position with nail screws complete all as specified and as directed.

S&F Prelaminated partical board 18/19mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board.

M&L 18-20 mm thick single piece machine kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engr in charge.

M&L 18-20 mm thick single piece machine kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engr in charge.

Framed work as in doors/gas cylinder cages or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete if structural steel is painted oe shop coat of zinc chromate primer paint (including preparation of surface) at at contractor's workshop before fabrication complete all as specified & as directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S & F SS grating suitable for 125 mm dia bore fixed with white cement with outer square frame, complete all as specified as directed by Engineer-in-charge .

S & F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls with & including fixing clamps complete all as specified and as directed.

S & F Plastic water closet seat WHITE COLOUR closed pattern with flat bottom and cover and mild steel chromium plated hinging devised fixed Complete all as specified and directed by Engineer in charge

S & F in repair Vitreous china wash hand basin, white, oval shape including 32mm dia CP brass waste coupling, 32mm dia PVC waste pipe, cast iron brackets and making good disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 complete all as specified.

S & F PVC valve less, syphonic action type, fluhsing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including 32mm bore PVC flushing pipe, brackets and fixed in repairs including taking down existing flushing cistern of any description complete all as specified.

M & L for rendering 10mm thick in cm 1:4 as setting coat and 5 mm thick in cm (1:4) as finishing coat as in chajja with WPC. Note: - WPC should be measured and paid separately.

M & L for preparing new plastered or surfaces of walls and applying two white wash, or tinted over & incl a coat of primer over & incl 3mm thick Birla white putty complete all as specified.

Removing building materals etc., (other than spoil payable under items 99 to 102 in Section 3-Earthwork) to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified.

S & F in repairs, Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with spreader and urinal waste pipe complete all as specified.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.

Taking down old U/S existing VTPN 4way, DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic rigid PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE

(b)One pin 5 amps socket point on the same board with other switches complete

(c) One 3 pin 5 amps socket on independent board.

Ditto all as per item No 158 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

Removing and re-fixing LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by engineer in charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.

S&F LED Bulb 9W, operating voltage- 220-240 volts, starting time < 0.5s, color temperature-6500K, lumens: min 825 complete all as specified and directed by Engineer-in-charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.

Taking down fan,sealing cable end,dismantling blades of any make, any sweep, complete all as specified and as directed.

Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of 'B' class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan complete all as specified and as directed. Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account.

supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

Taking down exhaust fan, dismantling blades of any make, any sweep, complete all as specified and as directed.

S&F sheet metal enclosure MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.

S&F MCCB 100 Amps, 415V, 16KA, 4 Pole, complete all as specified and as directed by Engr-in-charge.

S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (minimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 20AMP with valve flange suitable for 15mm bore pipe for water supply connection complete all as specified and as directed.

Supply, installation, commis-sioning of Water cooler fully stainlesssteel, electric driven single phase having approx storage and nominal cooling capacity 40/80 Ltr complete all as specified and as directed by Engr-in-charge

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Steel body complete all as specified and as directed by Engr-in-charge

M&L for submain wiring using 2 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 2runs of 6 Sqmm of voltage rating 1100V for Single phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-2 runs of single core FRLS PVC cable 6sqmm for Single phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit)

Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 3.5 core x 50 Sqmm complete all as specifed and as directed. Make : Polycab/KEI/Havells Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.

Supplying and laying un-reinforced precast concrete cable cover, class Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 cm spread thickness (8 cm in depth before laying the cable and 15 cm in depth after laying the cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid for.

Supply and fixing GI Pipe light grade og Size 80 mm bore with all fittings for passing of cables fixed to pole/wall/laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed. Make: Jindal/ Bansl/Tata

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

M S GROUP

KAMLA CONSTRUCTION COMPANY