1) Providing repairs to AHS Boys at Tadihathnoor (V) of Narnoor (M) in Adilabad District, 2) Providing repairs to AHS Girls at Jamda (V) of Narnoor (M) in Adilabad District, 3) Providing repairs to AHS Girls at Mankapur (V) of Narnoor (M) in Adilabad District

Supplying & fixing of 0.7x 1.8 Mts. (Single Leaf) Door frame made of solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM The frame should be provided with approved quality M.S.Powder coated butt hinges IS 205 125mm long of 6 Nos. along with Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as 1 M.S.Powder coated tower bolts I.S. 204, 100 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 2No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position, fixing of shutters, & hard ware fixtures, etc.,complete for finished item of work.

Supply and fixing of 18guage M.S.Plain sheet DOOR of size 1.20M x 1.80M (Double shutters) with outer angular frame of rolled steel equal angle ISA 2525 of size 25mm x25mm x 4mm and with MS hold fast 6 Nos with Double shutter frame of 25x25x4 mm in between 2 Nos 25x25x4mm 'L' angular section back side of shutter alround MS Square Pipe Rods with 18 guage MS Sheet welded with required fixtures such as M.S.Powder coated tower bolts I.S. 204 150mm long 2Nos, M.S.Powder coated Butt Hinges IS 205 125mm long 6Nos., M.S.Powder coated handles 2Nos, M.S.Powder coated Aldrops 300mm long 2No, and IS 208 125mm long including Red oxide primer of grade-l quality, sales and other taxes,cost and conveyance of all materials to site, all labour cahrges etc.,complete for finished item of work.

Supplying & fixing of 1.10x 2.00 Mts. (Double Leaf) Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as M.S.Powder coated tower bolts I.S. 204, 100 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 2No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position,fixing of shutters, & hard ware fixtures, etc.,c

Supply and fixing of Mosquito Mesh to Ventilators of Size 0.90 mx 0.60 m with SS Mesh and alround Teak Wood Beeding of 4 size 25x13 mm thick duly fixing mosquito mesh frame size 0.90 m x 1.20 m including cost and conveyance of all materials and labour charges etc., complete.

Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top 3 surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50 and water etc., complete, excluding seigniorage charges, etc., complete for finished item of work,

Supply and fixing of Mosquito Mesh to Ventilators of Size 0.90 mx 0.60 m with SS Mesh and alround Teak Wood Beeding of 4 size 25x13 mm thick duly fixing mosquito mesh frame size 0.90 m x 0.60 m including cost and conveyance of all materials and labour charges etc., complete.

WATER SUPPLY & SANITARY ARRANGEMENTS

Supplying & Fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks inlcluding cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supply and fixing of CPVC pipes and fitting to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tube sizes)1/2" to 2" SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 28.60 mm dia OD Pipes SDR 13.50

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand/rock sand (50:50), bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , Overheads & Contractors profit etc., complete for finished item of work as per Standard specification.

Supplying & fixing of 25mm Ball valve confirming to DIN Standards 8077/8092 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work

NAME OF THE WORK: Providing Repairs AHS Girls at Jamda (V) of Narnoor (V&M) in Adilabad District

Supplying & fixing of 0.7x 1.8 Mts. (Single Leaf) Door frame made of solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM The frame should be provided with approved quality M.S.Powder coated butt hinges IS 205 125mm long of 6 Nos. along with Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as 1 M.S.Powder coated tower bolts I.S. 204, 100 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 2No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position, fixing of shutters, & hard ware fixtures, etc.,complete for finished item of work.

Supply and fixing of 18guage M.S.Plain sheet DOOR of size 1.20M x 1.80M (Double shutters) with outer angular frame of rolled steel equal angle ISA 2525 of size 25mm x25mm x 4mm and with MS hold fast 6 Nos with Double shutter frame of 25x25x4 mm in between 2 Nos 25x25x4mm 'L' angular section back side of shutter alround MS Square Pipe Rods with 18 guage MS Sheet welded with required fixtures such as M.S.Powder coated tower bolts I.S. 204 150mm long 2Nos, M.S.Powder coated Butt Hinges IS 205 125mm long 6Nos., M.S.Powder coated handles 2Nos, M.S.Powder coated Aldrops 300mm long 2No, and IS 208 125mm long including Red oxide primer of grade-l quality, sales and other taxes,cost and conveyance of all materials to site, all labour cahrges etc.,complete for finished item of work.

Supplying & fixing of 1.10x 2.00 Mts. (Double Leaf) Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as M.S.Powder coated tower bolts I.S. 204, 100 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 2No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position,fixing of shutters, & hard ware fixtures, etc.,c

Supply and fixing of Mosquito Mesh to Ventilators of Size 0.90 mx 1.20 m with SS Mesh and alround Teak Wood Beeding of 4 size 25x13 mm thick duly fixing mosquito mesh frame size 0.90 m x 0.60 m including cost and conveyance of all materials and labour charges etc., complete.

Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top 3 surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50 and water etc., complete, excluding seigniorage charges, etc., complete for finished item of work,

Supply and fixing of Mosquito Mesh to Ventilators of Size 0.90 mx 0.60 m with SS Mesh and alround Teak Wood Beeding of 4 size 25x13 mm thick duly fixing mosquito mesh frame size 0.90 m x 0.60 m including cost and conveyance of all materials and labour charges etc., complete.

WATER SUPPLY & SANITARY ARRANGEMENTS

Supplying & Fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks inlcluding cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supply and fixing of CPVC pipes and fitting to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tube sizes)1/2" to 2" SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 28.60 mm dia OD Pipes SDR 13.50

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand/rock sand (50:50), bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , Overheads & Contractors profit etc., complete for finished item of work as per Standard specification.

Supplying & fixing of 25mm Ball valve confirming to DIN Standards 8077/8092 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work

NAME OF THE WORK: Providing Repairs to AHS Girls at Mankapur (V) of Narnoor (M) in Adilabad District

Supplying & fixing of 0.7x 1.8 Mts. (Single Leaf) Door frame made of solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM The frame should be provided with approved quality M.S.Powder coated butt hinges IS 205 125mm long of 6 Nos. along with Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as 1 M.S.Powder coated tower bolts I.S. 204, 100 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 2No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position, fixing of shutters, & hard ware fixtures, etc.,complete for finished item of work.

Supply and fixing of 18guage M.S.Plain sheet DOOR of size 1.20M x 1.80M (Double shutters) with outer angular frame of rolled steel equal angle ISA 2525 of size 25mm x25mm x 4mm and with MS hold fast 6 Nos with Double shutter frame of 25x25x4 mm in between 2 Nos 25x25x4mm 'L' angular section back side of shutter alround MS Square Pipe Rods with 18 guage MS Sheet welded with required fixtures such as M.S.Powder coated tower bolts I.S. 204 150mm long 2Nos, M.S.Powder coated Butt Hinges IS 205 125mm long 6Nos., M.S.Powder coated handles 2Nos, M.S.Powder coated Aldrops 300mm long 2No, and IS 208 125mm long including Red oxide primer of grade-l quality, sales and other taxes,cost and conveyance of all materials to site, all labour cahrges etc.,complete for finished item of work.

Supplying & fixing of 1.10x 2.00 Mts. (Double Leaf) Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as M.S.Powder coated tower bolts I.S. 204, 100 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 2No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position,fixing of shutters, & hard ware fixtures, etc.,c

Supply and fixing of Mosquito Mesh to Ventilators of Size 0.90 mx 1.20 m with SS Mesh and alround Teak Wood Beeding of 4 size 25x13 mm thick duly fixing mosquito mesh frame size 0.90 m x 0.60 m including cost and conveyance of all materials and labour charges etc., complete.

Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top 3 surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50 and water etc., complete, excluding seigniorage charges, etc., complete for finished item of work,

Supply and fixing of Mosquito Mesh to Ventilators of Size 0.90 mx 0.60 m with SS Mesh and alround Teak Wood Beeding of 4 size 25x13 mm thick duly fixing mosquito mesh frame size 0.90 m x 0.60 m including cost and conveyance of all materials and labour charges etc., complete.

WATER SUPPLY & SANITARY ARRANGEMENTS

Supplying & Fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks inlcluding cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supply and fixing of CPVC pipes and fitting to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tube sizes)1/2" to 2" SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 28.60 mm dia OD Pipes SDR 13.50

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand/rock sand (50:50), bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , Overheads & Contractors profit etc., complete for finished item of work as per Standard specification.

Supplying & fixing of 25mm Ball valve confirming to DIN Standards 8077/8092 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work

RUPEES THIRTEEN LAKHS THIRTY SIX THOUSAND TWO HUNDRED SEVENTY SEVEN ONLY