REP AND MAINT OF SECURITY STREET LIGHT, HIGH MAST LIGHT, POST TOP LATERN, GATE LIGHT, AUTOMATIC TIMER SWITCH, POLE PAINTING, LT PANEL,DISTRIBUTION UG CABLE, MCCBS, GEYSERS AND MISC ITEMS AT ZONE C AND D UNDER GE 867 EWS

Amount

Excavation in trenches in soft/ loose soil not exc 1.5 mtr wide and not exc 1.5 mtr deep in for lying of electric cable, pole foundation and stays etc and getting out, trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engr-in-charge.

All as per item No. 1 above but exceeding 1.5 mtr and not exc.3.0 mtr complete all as specified and directed.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 250mm thick after cable are laid and tested all as specified and directed.

Removing excavated material (Surplus soil) to a distance not exc 50m and depositing where directed at level not exc. 1.5m above the starting point all as specified and directed.

Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches, total 23 CM complete all as specified. Note - for measurement purpose punned thickeness 18 CM shall be considered

S & L sub class B bricks having minimum compressive strength 75 Kg/Sqcm laid in trenches for cable protection etc complete all as directed by Engineer -in-Charge.

Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish, M&L complete all as specified.

M&L for cement concrete (1 : 4 : 8) type D-2 using 40 mm graded aggregate as in foundtion for pole including necessary form workAll as specified and directed

M & L for cement concrete (1 :3 :6) type C-1 using 20 mm graded aggregate incl necessary form work all as specified

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 95 Sqmm 3.5 Core complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 50 Sqmm 3.5 Core complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 35 Sqmm 3.5 Core complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 25 Sqmm 4 core complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 16 sq mm 4 core complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 10 Sqmm 4 core complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 2 core 10sqmm complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 06sqmm 4 core complete all as specified and directed.

Dismantling / Taking out Unserviceable LT cables of size upto 35 sqmm any core from any position i.e ground / walls / poles / culverts etc complete with protection pipe all as specified and directed by Engineer-in-Charge.

Laying only LT under ground cable PVC/XPLE insulated PVC sheathed 1100 V grade armoured/ unarmered any type including testing commissioning of the cross sectional area 6 mm² to 150 Sq mm², 2/ 3.5/4 core complete all as specified and directed. Note :- Cable will be issued under Sch 'B' free for fixing. Excavation and earthwork will be measured under respective items.

S&F in repair 'Tubes "light grade" galvanised iron, laid under roads/drain, fixed to poles, walls, with flat iron clamps bolts/nuts/washers of the following sizes of 50 mm dia bore complete all as specified and directed.

S&F in repair 'Tubes "light grade" galvanised iron, laid under roads/drain, fixed to poles, walls, with flat iron clamps bolts/nuts/washers of the following sizes of 40 mm dia bore complete all as specified and directed.

M & L for junction box hot press moulded SMC of 295 x 195 x 100mm and outside dimention 32 with locking arrangements consisting of necessary suitable arrangements for incoming & out going cables with cable glands & having TPN Bus bar 100A amps capacity with necessary base insulator and including necessary flat iron clamps with nuts, bolts & washers all as specified and directed. Make- Sintex Industries Ltd or equivelent make.

Dismantling and taking down any type of LT poles from any location all as specified

Supply, Install and errect in true vertical position steel tubular swaged poles in replacement complete with MS base plate of 6mm of size 300mm X300mm finial taper plug,pole cap,bolts,nuts and washers screws,pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bitumenous paint for portion embedded in concrete complete all as specified and as directed Note: Excavation and earth work ,PCC in foundation /plinth block/coping shall be measured and paid for separately

Dismantling of cross arms of MS fabricated complete with all accessories viz nut, bolts, washer etc. complete all as specified and directed.

Supply and fixing cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including a coat of red oxide primer one underand & one finishing coat complete all as specified and directed.

Material and labour for disconnection of electric cable from pole and bringing it to ground for cutting of damaged part of cable and putting insulation tape and reconnecting the same on exising pole after taking out additional cable from loop of the cable after excavation complete all as directed by Engr-in-Charge.

Material and labour for Load balancing of LT panel in all three phases of all outgoings complete with all as specified under:- a) Taking of load of LT panel out going cables with the help of tong testing three times in a day to assess maximum unbalance of load. b) To disconnect the LT cables/ TC wires and reconnect the same as per the load of the MCCB to balance the circuit. c) Take the building wise load on the panel and make the load balance at bldg end.

Material and labour for cleaning of panel busbars and cable termination with the help of CRC spray, dismantling the cables from connections, lubrication of hinges of panels, welding of hinges if required and reconnecting the cables after cutting of damaged cable parts and relugging complete, tapping if required, cleaning the complete panel after disconnection from main supply and taking out of loop complete all as directed by Engr-in-Charge. Note :- i) Contractor will take proper shut down of panel from Power house before starting the work.

Trimming of tree branches which touches the LT/HT OH lines and 2.5 Mtr away from centre line of LT/HT oh lines span not exceeding 60 Mtr distance between poles by using neccessory T&P items and depositing the tree branches/leaves at 30 Mtrs away from the site . Note -Any number of tree branches cut in one span will be measured as one lenght for payment.

Restringing of existing LT overhead line including removing the existing binding wire and rebinding with new binding wire after tightning of overhead lines including disconnecting existing jumpher and connections and reconnecting after tightning of conductor incl replacement of all jumpers all as directed by Engr -incharge. Note - (a) Single wire run of conductor in LT lines shall be measured as one lenght for payment purpose. (b) ACSR conductor will be measured and paid separately.

Repairing of LT panel by means of replace the hinge and locking arrangement of the existing panel, tightening the cable with bus bar by means of suitable lugs all as specified and as directed by Engr-incharge.

Material and labour for spray painting to outdoor/Indoor type double door LT panels/Fedder pillar box incl angle iron stand by applying two coats of synthetic enamel paint over a coat of red oxide primer after cleaning the surface thouroughly with scrapper of MS sheet and angle iron stand incl cleaning of cables, wiring and other non painted parts of paint all as directed at site.

Material and labour for replacement of old unserviceable voltmeter/ Ammeter with Panel mounted multi function three phase digital energy meter of accuracy Cl-1.0 for measuring Voltage, Current, KW, KVAR, KWH, KVAH and power factor and making the disturbed surface good by welding/riveting in MS sheet 1.6 mm thick on the hollow portion duly painted and replacement of wiring if required complete all as directed at site. Make: Schneider EM6400 with RS 485 Port or equivalent in Siemens/L&T.

Material and labour for replacement of old unserviceable indicators any type with LED based indicating lamps of RYB colour incl making hole in existing panel complete all as directed at site. Make : Legrand/ABB/Siemens

Material and labour for replacement of old unserviceable CT of LT Panel /Feeder pillar box with CT of 100/5A ratio, 5 VA incl connecting, disconnecting and testing complete all as directed at site.

Material and labour for replacement of old unserviceable CT of LT Panel /Feeder pillar box with CT of 160/5A ratio, 5 VA incl connecting, disconnecting and testing complete all as directed at site.

Supply, jointing and testing staright through joint Heat shrinkable type with jointing kit suitable for LT 1100 Volt graded XLPE size 150 to 185 sqmm x 3.5 core in any situation/position complete all as directed. Make : Denson / Raychem / Cabseal

Supply, jointing and testing staright through joint Heat shrinkable type with jointing kit suitable for LT 1100 Volt graded XLPE size 70 to 120 sqmm x 3.5 core in any situation/position complete all as directed. Make : Denson/ Raychem /Cabseal

Supply, jointing and testing staright through joint Heat shrinkable type with jointing kit suitable for LT 1100 Volt graded XLPE size 25 to 50 sqmm x 3.5 core in any situation/position complete all as directed. Make : Denson/ Raychem /Cabseal

S & F for replacement of pin type insulator porcelain vitreous white/ brown or green including one galvanised mild steel spindle two GI washer and one GI nut 100mm height, 65mm dia for 1100 Volt grade complete all as specified and directed.

S & F for replacement of Sackle type insulator porcelain vitreous white/ brown or green including one galvanised mild steel straps of size 31 x 5 mm, washers insulator bolt of 14 mm dia and nuts complete of size 100 mm hight and 115mm dia of working pressure 1100 volts grade complete all as specified and directed.

M&L in replacement of u/s MCCB of 4 pole of capacity 63 to 100 Amps 415 Volts with breking capacity 16 KA complete all as specified and directed by Engr-in-charge. Make:- L&T/ Legrand/ Scheinder/ Siemens

M&L in replacement of u/s MCCB of 4 pole 200 Amps adjustable type, 415 Volts, with breking capacity 36 KA complete all as specified and directed by Engr-in-charge. Make:- L&T/ Legrand/ Scheinder/ Siemens

M&L in replacement of u/s MCCB of 4 pole 250 Amps adjustable type, 415 Volts, with breking capacity 36 KA complete all as specified and directed by Engr-in-charge. Make:- L&T/ Legrand/ Scheinder/ Siemens

M&L in replacement of u/s MCCB of 4 pole 400 Amps adjustable type, 415 Volts, with breking capacity 50 KA complete all as specified and directed by Engr-in-charge. Make:- L&T/ Legrand/ Scheinder/ Siemens

S&F in replacement of primary relay foe 50 KVA 3 phase, 415 v, 50 Hz servo voltage stablizer including all electric connections all as specified and directed.

S&F in replacement of secondary relay relay foe 50 KVA 3 phase, 415 v, 50 Hz servo voltage stablizer including all electric connections all as specified and directed.

M&L for control wiring as per existing with color coding and marking in 50 KVA, 3 phase, 415 volt with copper wire complete all as specified and directed.

M & L for preventive maintenace/periodical servicing of 50 KVA servo voltage stablizer by checking the various critical setting in mechanism, checking of oil, checking of cooling fins, conrol wirig & testing of servo votage stablizer for smooth and correct fuctioning complete all as directed.

M&L for earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.(set of two) NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

Supply, fabricate, erect, connect, test and commissioning of factory made, CPRI approved, cubical type, Outdoor type LT panel board, double door, totally enclosed, dust, weather and vermin proof 1100 Volt, 3 phase, 4 wire system, 50 HZ , 415 volt supply made out by 3.15mm thick CRCA sheet for load bearing and 2mm thick for non load bearing, fully compartmentalised, with IP - 65 protection, painted with powder coated paint, and 4 side slanting canopy type roof on top, danger notice board, Suitable size of padastal frame 600mm hight above ground level including PCC work and dismantling of old LT panel and cable connection as per existing all as per conforming to IS-2417 of 1962, complete including the following accessories for each set all as specified and directed. (a) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 100 Amps, 415 Volt, 50KA - 01No. (incoming) (b) 4 Nos bus bar of equal size made out of copper bus bar of suitable size with of rating 200 Amps, for out going looping and branch connection system, mounted on non cracking resin type insulators - 01 Job. (c) Provisioning of copper tinned cable glands for incoming and outgoing cables - 01 Job. (d) Indication lamps R, Y & B - 01 Set

Supply, erection, testing and commissioning of outdoor type LT Bus Bar Chamber box in replacement, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos stepped type Aluminium bus bars 400Amps capacity for looping & branch connection system .The chamber shall be painted with powder coated paint. The bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 (a) The bus bar chamber shall be made out of 3.0mm thick CRCA mild steel sheet and 3.00mm thick gland plate , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and angle iron padastal frame 600mm high above ground level. The bus bar chamber shall be provided with ventilation facility in the form of louvers for better heat dissipation. (Note : The bus bar chamber Box shall be designed in such a way that adequate workable space is made available inside the compartments and the size of the chamber shall not be less than 600mm height (without base frame & canopy), 600mm width and 500mm depth).

M&L for painting of 9 Mtr Long steel tubular LT pole , vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ) complete all as directed.

Labour only for disconnection of off road existing security light fitting of any type by isolating jumper from OH line, terminal connection from junction box and removing carbonised/defective part of the cable including replacement of unserviceable cable connection and reconnecting the same after making security light in ON road position complete all as directed by Engr-in-Charge. Note : New cable connection will be measured and paid separately under respective item.

Supply and fix in replacement of Street light driver of 40 watts, 230 V, 50 HZ, suitable for operation over voltage range and by removing from existing position complete as per following make and model complete all as specified and directed by EIC. Model - LSTS-40-CDL Make-Crompton/Philips/Surya/Havells Note : i) T&P required for carry out the repair work on street lights at a height up to 15 meter will be arranged by contractor and rates for the same deemed to be included in quoted rates. ii) Contractor is bound to provide material to match the technical specification of LED fittings and material is also required to fix casing of LED fitting. iii) Before quoting the rate of driver contractor should check the technical specification of the driver.

All as per item No 56 above but cap. of 45 Watt LED fitting complete as per following make and model or as directed by EIC. Model- 1) ENDURAPEARLNEOSL45WLED757SASYTOPC Make-Crompton /Philips/ Surya/ Havells.

All as per item No 56 above but cap. of 50 Watt LED fitting complete as per following make and model or as directed by EIC. Model- 1) LSTP-60-CDL 2) Havells model- Jeta Neo 50 (IP65) Make-Crompton/Philips/Surya/Havells.

All as per item No 56 above but cap. of 60 Watt LED fitting complete as per following make and model or as directed by EIC. Model- 1) ENDURAPEARLPLUSSL60WLED757SASYTOC 2) Surya model-SLEUL60WIP66LXN Make-Crompton/Philips/Surya/Havells.

All as per item No 57 above but cap. of 90/120/110 Watt LED fitting complete as per following make and model or as directed by EIC. Model- 1) LFLN-120-CDL/60" 2) LFLN11-110-CDL/60 3)Surya model- SLEFL120WIP65LUMOS 4) SLEUL90W IP66LXN Make-Crompton/Philips/Surya/Havells.

All as per item No 56 above but cap. of 35 Watt Post top LED fitting complete as per following make and model or as directed by EIC. Model- 1) RUBYPT35WLED757PSYMTOPC Make-Crompton/Philips /Surya /Havells.

All as per item No 56 above but cap. of 8 Watt BAMBOO bollard light LED fitting complete as per model or directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item no 56 above but cap of 15 Watt post top , LED fitting complete as per cat part No RUBYMINIPT15WLED757PSYMTOPC of Havells.

Supply and fix in replacement of surge protector of 5 KV suitable to accomadate in LED street/flood light fittings of 25/30/36/45/60/72/100 /120/135 /150/165 and 200 Watts, 230 V, 50 HZ by removing from existing position complete all as specified and directed by EIC. Note : i) T&P required for carry out the repair work on street lights at a height up to 15 meter will be arranged by contractor and rates for the same deemed to be included in quoted rates. ii) Contractor is bound to provide material to match the technical specification of LED fittings and material is also required to fix inside casing of LED fitting. Make-Philips/Wipro/Crompton/Goldwyn/Decorex.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. MAKE :- Phillips/wipro/Crompton.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. MAKE :- Phillips/wipro/Crompton.

Supply and fixing in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. MAKE :- Phillips/wipro/Crompton.

Supply and fixing in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. MAKE :- Phillips/wipro/Crompton.

Supply and fixing in replacement post-top-luminaire, 15 watt, IP-65 protoection, operating temp -10 degree celcius to +45 degree celcius, Operating voltage range - 140-270 V, guaranteed burning life 50000 hours, Die-cast aluminium spigot housing for mouting of driver with spun aluminium canopy painted white inside, epoxy powder coated matt black finish, Lumen efficacy >140 lm/watt, high quality polycarbonate cover with acrylic diffuser, electronic driver powered by integral in ABS housinng with APFC, SMPS based constant current supply with lower THD, Short ciruit, over voltage, surge voltage protection as per IS 15885 Part-2/Sec -3. Mounting suitable for pole having 50 to 70 mm dia complete all as specified and directed by Engineer-in-charge. Make : Havells, cat part No RUBYMINIPT15WLED757PSYMTOPC, Model : RUBY (Clear) or equivalent.

S&F Street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bend to shape as directed, including suitable MS clamp of MS flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint complete including taking down u/s bracket any type all as specified and as directed.

Material and labour for Stringing of existing stays after dismantling from pole and refixing the same after properly straightning of conductor complete all as directed by Engr-in-Charge.

Supply & Laying in replacement of GI pipe light grade as protection for UG cable/for stand of post top lantern complete all as specified & directed of size of bore dia 40mm complete all as specified and as directed.

Supply & Laying in replacement of GI pipe light grade as protection for UG cable/for stand of post top lantern complete all as specified & directed of size of bore dia 25mm complete all as specified and as directed.

Taking out and relaying of existing brick/cable cover to the existing trench after completion of fault finding work of cable complete all as directed. Note :- Excavation work will be paid under respected item.

Material and labour for taking out and relaying of existing cable of any size after completion of fault finding work of exiting cable complete all as directed. Note :- Cost of excavation of cable will be paid respective item.

Supply & fixing in replacement automatic street light switch of rating 8 KW in single phase using nature sensor for automatic swithing "ON/OFF" of street lighting based on lux level of natural light along with 63 Amps contactor, MCB 63 Amps with support terminals prewired with PVC insulated 16 Sqmm multi strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof , shock proof , termite proof & dust proof FR grade moulded compound Junction Box complete all as specified. Model - SWADEEP - 02EC 8 KW 1 P MAKE- 1.Nature-Nature Switch : Kakatiya Energy systems Pvt. Ltd / HEALER / BAJAJ

M&L in replacement of Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron wire 4mm dia by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site.

Supply & Fix in replacement 3 Core copper cable 1100 volts grade PVC insulated and PVC sheathed of size 1.5 sqmm complete all as specified and as directed.

S&F PVC flat twin core unarmoured aluminium cable of size 4.0 Sqmm complete all as specified and directed.

S&F PVC flat twin core unarmoured aluminium cable of size 6.0 Sqmm complete all as specified and directed.

S&F PVC flat twin core unarmoured aluminium cable of size 10.0 Sqmm complete all as specified and directed.

M&L for Painting of complete GI post top light fitting pipe hight upto 1 mtr with PCC protection of pipe by applying single coat of synthetic enamel paint after preparation of existing surface of GI post , colour as existing or directed by Engineer in charge.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound and re-assembling of Geysers after repairs carrying out and re-fixing in same position (Replaced items such as spares measured and paid separately under relevent items) including making good to disturbed portin of walls with CM (1:3) or PCC (1:2:4 Type B1) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge. Note :- Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate.

All as per item No. 83 here in before but for descaling / cleaning the inner tank including denting and brazing the leakage joints / points till the leakage stops including carrying out minor repair of outer body surface, bottom and top cover complete all as specified and as directed by Engineer-in-charge. Note :- Any damage caused during the process of cleaning the geysers shall be made good by contractor at no extra cost department.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place cleaning all type dust, stains etc, painting with one coat of syntatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge.

S&F heavy duty stainless steel inner tank suitable for 25 Ltrs capacity Geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.

S&F heavy duty stainless steel inner tank suitable for 50 Ltrs capacity Geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.

S&F in replacement 2.0 KW capacity Heating Element, Push/ Screw type with ‘triangle cup/'O' Ring type' including making electrical connection complete all as directed by Engineer-in-Charge.

S&F in replacement 1.5 KW capacity Heating Element, Push/ Screw type with ‘triangle cup/'O' Ring type' including making electrical connection complete all as directed by Engineer-in-Charge.

S&F in replacement for Thermostat/autocut switches for geysers 25/ 50 Ltr capacities including making connection complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement safety valve spring locked type with inlet coupling all as specified and directed by Engineer-in-Charge.

S & F in replacement of fusible plug for suitable capacity of geysers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement indicator lamp round /rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engineer-in-Charge.

S&F in replacement glass wool for insulation of geyser 25/50 Ltrs capacity and any make all as directed by Engineer-in-Charge.

S&F in replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 25 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 50 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of geyser assembly suitable for 25 ltr capacity ISI marked including dismantiling of old unserviceable geyser assembly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of geyser assembly suitable for 50 ltr capacity ISI marked including dismantiling of old unserviceable geyser assembly complete all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC connection heavy duty with brass/PTMT nuts of reqd length not exceeding 300 mm with rubber & PVC washer suitable for 15 mm bore GI pipe complete for cold water.

Supply & fixing hot water outlet connection made of brass chromium plated with Union rubber washer suitable for 15 mm bore GI pipefor hot water.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified. Cat part No 5078 11 Make- Legrand or equivalent in Siemens/Schindler.

S&F in replacement plug top 15 Amps 240 Volts complete all as specififed and directed by Engineer-in-Charge.

S& F in replacement 2.5 Sqmm 3 core PVC insulated unsheathed stranded copper wire complete all as specified and directed by Engineer-in-Charge. MAKE:- ANCHOR/FINOLEX/PLAZA/ HAVELLS/ HPL/ POLYCAB

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring.

Dismantling of exhaust fans of 300/200/250/150mm sweep AC single phase 230/240 volts of any make / model except old vintage, dismantling stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire of existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish, cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws, condensor, ball bearing etc, as required and reassebling complete all as specified and directed by Engineer-in-Charge.

Supply only ball bearings No 6203 suitable for fan of existing make type & sweep complete make NBC/SKF/TATA

Supply only 2.5 MFD capacitor suitable for exhaust fan of existing type & sweep complete of 300/250/150 mm capacity.

Taking down exhaust fan of any size and cleaning all type dust, oil stains etc, painting with one coat of syntatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge.

M&L for shifting of exhaust fan from one place to another including making hole at new place and filling of hole at old place including all necessary electric connection, brick work, plastering and 2 coat of painting of size 150, 200, 250 and 300 mm dia all as specified and as directed.

Supply and fix in repairs unservicable broken/burnt ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete.

Servicing AC Split type 1.5/2 TR indoor and outdoor unit cleaning of all parts i.e. cooling coil, blower motor ,fan blades, water tray, air filter, replacement of minor parts such as screws nuts, bolts, etc and wiring kit complete after completion testing complete including taking out and refixing or all as specified and as directed by Engr-in-Charge.

Taking out for repairing of defective AC Split type 1.5/2 TR indoor and outdoor unit and checking of wiring and rectification of defects including necessary dismantling and taking out for reparing and refixing and replacing spares as required complete all as directed by Engineer-in-Chare. Note:- Accessories / spares required for replacement shall be measured and paid separately under respective items of schedule ‘A’ as supply only.

Supply only Starting relay suitable for split AC complete all as specified and as directed.

Supply only Running capcitor 45 mfd + 06 mfd suitable for split AC complete all as specified and as directed.

Supply only Condenser fan blade suitable for split AC complete all as specified and as directed.

Supply only Starting capacitor 100/120 mfd suitable for split AC complete all as specified and as directed.

Supply & Fixing in repairs sealed unit compressor (replaced with original company repaired) for Capacity 1.5 Ton to 2 Ton suitable for split AC.

Material & labour for Gas Charging R22 to split AC of any capacity complete all as specified and as directed.

Supply & fixing in repairs Blower motor suitable for split AC complete all as specified and as directed.

Supply & fixing in repairs Drain pipe suitable for split AC complete all as specified and as directed.

Dismantling the blower motor of any capacity split AC,cleaning completely all the parts, taken out burnt out winding and fresh winding with super enamelled copper wire of existing sizes including varnishing, re-assembling of the motor by replacement of ball bearings including painting of two coats synthetic enamel paint of approved colour and testing complete all as specified and as directed by Engr -in- Charge.

Transporting of defective refrigerator of any make and capacity from MES store yard ro Contractor workshop for carrying out necessary repair and rectification of defects including necessary dismantling and taking out for reparing and refixing and replacing spares as required including bringing back to MES storeyard/ directed location after repair and testing complete all as directed by Engineer-in-Chare. . Note:- Accessories / spares/ Gas charging required for replacement shall be measured and paid separately under respective items of schedule ‘A’ as supply only.

Supply only Starting capacitor suitable for 190 to 230/250 to 345 Ltr capacity refrigerator complete all as specified and as directed.

Supply only Termostat switch suitable for 190 to 230//250 to 345 Ltrr capacity refrigerator complete all as specified and as directed.

Supply & Fixing in repairs Freezer chamber (Evaporator coil) suitable for 190 to 230//250 to 345 Ltr capacity refrigerator complete all as specified and as directed.

Supply & Fixing in repairs Compressor suitable for 190 to 230//250 to 345 Ltr capacity refrigerator complete all as specified and as directed.

Material & labour for Charging of refrigerant gas R-134A/R-22 for refrigerator & deep freezer complete all as specified and as directed.

Transporting of defective Deep freezer of any make and capacity from MES store yard ro Contractor workshop for carrying out necessary repair and rectification of defects including necessary dismantling and taking out for reparing and refixing and replacing spares as required including bringing back to MES storeyard/ directed location after repair and testing complete all as directed by Engineer-in-Chare. . Note:- Accessories / spares/ Gas charging required for replacement shall be measured and paid separately under respective items of schedule ‘A’ as supply only.

Supply only Capacitor 3 mfd suitable for 150 to 205/300 to 335 Ltr capacity deep freezer complete all as specified and as directed.

Supply only Starting capacitor suitable for 150 to 205/300 to 335 Ltr capacity deep freezer complete all as specified and as directed.

Supply only Filter strainer suitable for 150 to 205/300 to 335 Ltr capacity deep freezer complete all as specified and as directed.

Supply & fixing in repairs Expansion valve suitable for 150 to 205/300 to 335 Ltr capacity deep freezer complete all as specified and as directed.

Supply & Fixing in repairs Compressor suitable for 150 to 205/300 to 335 Ltr capacity deep freezer complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

Sri Gupta Construction

SANJAY MITTAL

MS MAYA PRAKASH GOEL AND SONS

GEETA CONSTRUCTION

DEEP CHANDRA JOSHI

MANOJ JINDAL

M/S G. K. SUTHAR