Construction of Urinals 3 seats

Amount

Earth work excavation for foundation complying with reference clause of TNSS well sinking with in the initial lead of 10 mtr and initial lift of 2 mtr in hard stiff clay, stiff block cotton , hard red earth, shalls murram earth mixed with small size boulders including all other labour charges etc., complete as per std., specification

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. laying and curing etc., complete. complying with std., specifications.

Supplying and erecting centering for sides and soffits including supports and srtutting upto 3.29 m height for plane surfaces in all floors with cross bracings using miled steel sheets of size 30cm x 60cm and 10 gauge stiffened welded with miled steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood).Joists of size 10cm x 6.5cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced 75cm centre to centre etc., complete complying with standard specification ans as directed for the following items as per MORTH Specification 1500. (For Column & Grade Beam )

FOR COLUMNS

FOR GRADE BEAMS & FOOTINGS

Supplying fabricating and placing in position of RTS steel rods for reinforcement including the cost of steel and binding wire etc., complete and as directed by Departmental officers.

Reinforced cement concrete 1:1.5:3 Mix using 20mm size 1SS HBG grade machine crushed metal and excluding the cost of reinforcement and centring works and including the cost :of mixing laying curing etc complete complying with standard specifications.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best II class Bricks of size 9 x 41/2 x 3 from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand ) 12 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Supplying and fixing of M.S.grill Tress with Purlion of approved design for MS Pipe using necessary mild steel flats for inner and outer members which should be fixed to frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standared specifications.

Supply and fixing of best approved quality of Prepainted Galvalum Sheet 6mm thick including 15cm lapping for necessary J Bolt and nuts, Bitumen Washer and screw if wooden batterns using necessary trusses, purlins and ''U" or "J" bolts, nuts, screws, nails and bitumen washers including cost of labour and materials etc., complete complyingg with standard specification as directed by the departmental officers.

Painting two coats ready mixed Approved Exterior Emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best Cement paint as directed by the department officers etc complete and including necessary plaster of paris whever regd.(S.l.No.358) -10sqm complete. as per std., specifications.

Painting two coats new iron work for grills, with two coat synthetic enamel paint and approved quality and colour including priming coat . The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

Floor finishing with ceramic tilles using best quality of ceramic tiles of size 30cm x30cm x 6mm over the base Plastering cement mortar 1:3 mix, 20mm thick pointing with Using white cement 4kg/10m2 including cost and conveyance of all Materials and all abour charges etc., complete:-

Dadooing the walls with best approved quality colour glazed tiles of size 200 x 200 x 6mm set in CM 1:2 (One of cement and two of sand) 10mm thick and pointing with colour cement using 0.4kg per m2 neatly in all floors as directed etc., complete complying with standard specifications.

Supply and fixing in position of White Glazed Earthernware Lipped Mouth Flat Back Urinals including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.(Gents)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) [ SD NO. 20 ]

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube [SD 88 ]

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD-85

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(SOR Item no.268,P.No.65)

SV SATHISHKUMAR BUILDING MATERIALS SUPPLIER & CONTRACTOR (BID ID -1101610)