GE(S)/M-33/2022-23

Amount

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete and making good disturbed surfaces of walls, floors to match with existing specifications and keeping aside serviceable items for reuse within the same bldg and removing UNSV items from site, complete all as specified and directed.

M&L Point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including non metallic rigid PVC conduit having wall thicknes 1.8mm including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed. Note:- The unit rate quoted include the cost of cutting chases in surface for conduits and fixing sunken boxes and making good the disturbed surfaces to match existing surfaces.

All as per Srl item No. 2.00 here-in before but point wiring in existing conduit complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but one light point controlled by two way switches in existing conduit complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for one 3 pin 5 Amps socket outlet on same board with other switches complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for one 3 pin 5 Amps socket outlet on same board with other switches in existing conduit complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for one 3 pin 5 Amps socket outlet on independent board with other switches but below the switch board of light points in the same board complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for one 3 pin 5 Amps socket outlet on independent board with other switches but below the switch board of light points in the same board in existing conduit complete all as specified and directed.

All as per srl item No. 2.00 here-in-before but for one 3 pin 5/6 Amps socket outlets point on independent board using 2.5 Sqmm FRLS PVC insulated multistranded copper conductor cable including 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth wire complete all as specified and directed.

All as per srl item No. 2.00 here-in-before but for one 3 pin 5/6 Amps socket outlets point on independent board using 2.5 Sqmm FRLS PVC insulated multistranded copper conductor cable including 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth wire in existing conduit complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for one 3/5 pin 15/16 Amps socket outlet point on independent board using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit of wall thickness 1.8mm including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed. Note:- The unit rate quoted unclude the cost of cutting chases in surface for conduits and fixing sunken boxes and making good the disturbed surfaces to match existing surfaces.

All as per Srl item No. 2.00 here-in before but for one 3/5 pin 15/16 Amps independent socket outlet point using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in existing non metallic rigid PVC conduit of wall thickness 1.8mmincluding CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for AC outlet point on independent board using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit of wall thickness 1.8mmincluding CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

All as per Srl item No. 2.00 here-in before but for AC outlet point using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in existing non metallic rigid PVC conduit of wall thickness 1.8mm including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed. Note:- The unit rate quoted unclude the cost of cutting chases in surface for conduits and fixing sunken boxes and making good the disturbed surfaces to match existing surfaces.

S&F Switch piano flush button, single pole, one way, 5/6 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Switch piano flush button, single pole, one way, 15/16 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Switch piano flush button, single pole, two way, 5/6 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Socket outlet, 5 Pin, 5/6 Amps, multipurpose, 2 in 1, flush type, single pole one way 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Socket outlet, 6 Pin, 5/6 and 16 Amps, multipurpose, 2 in 1, flush type, single pole one way 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F bell push flush button, single pole, one way, 5/6 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for Angle/ batten fittings including self ballasted LED retrofit bulb 15 watt with PBT body shell and PC Diffuser. 240 Degree wide distribution available CCT 3000K & 6500 K complete all as specified and directed.

S&F bell electric, heavy duty, Ding Dong type, 230 Volts AC, single pole, complete all as specified and directed.

S&F fan regulator electronic switch type, hum free with polycarbonate body, suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed.

M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLS PVC insulated unsheathed fire retardent copper conductor cable 1100 volts grade in and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8mm including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed. Note:- The unit rate quoted include the cost of cutting chases in surface for conduits and fixing sunken boxes and making good the disturbed surfaces to match existing surfaces.

All as per Srl item No. 25.00 here-in before but point wiring in existing conduit complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for one 3 pin 5/6 Amps socket outlet on same board with other switches complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for one 3 pin 5/6 Amps socket outlet on same board in existing conduit with other switches complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for one 3 pin 5 Amps socket outlet on independent board with other switches but below the switch board of light points in the same board complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for one 3 pin 5 Amps socket outlet on independent board with other switches but below the switch board of light points in the same board in existing conduit complete all as specified and directed.

All as per srl item No. 25.00 here-in-before but for one 3 pin 5/6 Amps socket outlets point on independent board using 2.5 Sqmm FRLS PVC insulated multistranded copper conductor cable including 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth wire complete all as specified and directed.

All as per srl item No. 25.00 here-in-before but for one 3 pin 5/6 Amps socket outlets point on independent board using 2.5 Sqmm FRLS PVC insulated multistranded copper conductor cable including 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth wire in existing conduit complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for one 3/5 pin 15/16 Amps socket outlet point on independent board using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit having wall thicknes 1.8mm including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for one 3/5 pin 15/16 Amps independent socket outlet point using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in existing non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for AC outlet 15/16 Amp socket point on independent board using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

All as per Srl item No. 25.00 here-in before but for AC outlet 15/16 Amp point using 4 Sqmm FRLS PVC insulated unsheathed copper conductor single core multistranded cable and 4 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in existing non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

S&F modular switch 1 way 6 Amp, 1 module, complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F modular socket outlet 6 Amp, 2/3 pin mutipurpose, 2 module complete all as specified and directed.

S&F modular socket outlet 6/16 Amp, 6 pin multi purpose, 2 module, complete all as specified and directed.

S&F modular bell push button single pole 1 way 6 Amp, 1 module, complete all as specified and directed.

S&F modular fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 120W, 2 module, hum free and connecting electrically, complete all as specified and directed.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, single pole & neutral with 200 Amps, 240volts 04 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, Triple pole & neutral with 200 Amps, 240volts 04 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, single pole & neutral with 200 Amps, 240volts 08 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, single pole & neutral with 200 Amps, 240volts 12 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F "in replacement" MCB SP, 240 Volts, 6 to 32 Amps with repturing capacity 10 KA 'B' series complete all as specified and directed.

S&F "in replacement" MCB SPN, 240 Volts, 40 to 63 Amps with repturing capacity 10 KA 'C' series complete all as specified and directed.

S&F "in replacement" MCB TPN, 415 Volts, 50HZ, 100 Amps with repturing capacity 10 KA 'C' series complete all as specified and directed.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, single pole & neutral with two pin and earth plug socket including one single pole MCB 20 Amps, 'C' curve 240 volts 10 KA complete all as specified and directed.

S&F "in replacement" VTPN distribution board, double door, TPN 415 Volts 4 way degree of protection IP-65 DBs TPN suitable for MCCB as (for incoming MCCB & outgoing MCBs 415 Volts), including MCCB 415 Volts 63 Amp 16 Ka as incommer and 16 Nos MCB SP 63 Amp cap as outgoing complete with appropriate size copper bus bar for each phase, with 2 Neutral link, fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specifications complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 6.0 Sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead, drawn in and including concealed non metallic rigid PVC conduit, heavy duty of wall thickness 1.8mm and making good the disturbed surfaces to match with existing specifications, including taking down existing sub main wiring complete all as specified and directed. Note :- Two run of cable with one run of earth wire and PVC conduit shall be measured and paid for as one unit.

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 10.0 Sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 10.0 Sqmm as earth lead, drawn in and including concealed non metallic rigid PVC conduit heavy duty of wall thickness 1.8mm, medium grade and making good the disturbed surfaces to match with existing specifications, including taking down existing sub main wiring complete all as specified and directed. Note :- Two run of cable with one run of earth wire and PVC conduit shall be measured and paid for as one unit.

S&F self driver LED batten 20 watts extruded theremolpastic body decorated type with PC diffuser in unique square > 120 degree wide distribution, 4 feet 20W LED batten 4 feet 20 Watt, 220 Volts CCT 6500K including connection upto ceiling rose with flexible copper twin twisted wire complete all as specified and directed.

S&F LED 10 watts light fitting mirror type with high output diffuser in unique square > 120 degree wide distribution, 10W 220 Volts AC decorative type with driver holder and LED lamp iincluding connection upto three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x9 Watt/1x10 Watt bulk head luminaries including LED light driver holder including connection upto three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repalcement of LED building security light fitting 25 watts, IP 65, having pressure die cast aluminium alloy housing, prismatic polycarbonate cover, making connection with 3 core copper flexible cable of size 23/0.0076 including fixing of street light fitting galvanised iron bracket 0.90m long of suitable dia complete all as specified and directed.

Supply and fixing as in repair of 60W LED Street Light luminaire. LED Street Light shall be made up of Pressure Die Cast aluminum housing with black epoxy polyester powder coating for long life. The luminaire shall be complete IP66 for Optical Compartment and Control Gear Compartment.The Optical compartment shall be covered with heat resistant toughened glass for safety.The LED Street light should be top maintainable for easy maintenance.LED Street Light shall use multiple LEDs to get sufficient light output from the luminaire. The LED Street Light shall be of Integral type. The Input voltage range shall be 150V to 270V. The LED Driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED Street Light shall have power factor more than 0.95 complete all as specified and directed.

Supply and fixing as in repair of 150W LED flood light luminaire. LED Street Light shall be made up of Pressure Die Cast aluminum housing with black epoxy polyester powder coating for long life. The luminaire shall be complete IP66 for Optical Compartment and Control Gear Compartment.The Optical compartment shall be covered with heat resistant toughened glass for safety.The LED Street light should be top maintainable for easy maintenance.LED Street Light shall use multiple LEDs to get sufficient light output from the luminaire. The LED Street Light shall be of Integral type. The Input voltage range shall be 150V to 270V. The LED Driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED Street Light shall have power factor more than 0.95 complete all as specified and directed.

Supply, fixing in replacement of existing unsv recess/suspended slim LED panel light with powder coated rim 36 watts of size 2'x2' high efficency designer recessed mirror optic luminary with ceiling cut out size 36 watt including LED lamps complete including connecting electrically to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75mm complete all as specified and directed.

Supply, fixing in replacement of decorative post lantern 40 watts 230 volts, 50 Hz, mushroom or oval shaped in slotingopal/prismatic finish made up of polycarbonate, suitable for 40 watts LED including all accessories prewired complete all as specified and directed.

Supply, fixing and testing of 200W LED highbay Light luminaire with tapered fin design and excellent thermal management along with IP-66 protection. LED highbay Light shall be made up of Pressure Die Cast aluminum housing with black epoxy polyester powder coating for long life. The luminaire shall be complete available up to CCT 6500K, IP66 for Optical Compartment and Control Gear Compartment.The Optical compartment shall be covered with heat resistant toughened glass for safety.The LED highbay light should be top cover maintainable for easy maintenance. LED highbay Light shall use multiple LEDs to get sufficient light output from the luminaire more then 20000 luman. The LED Flood Light shall be of Integral type. The Input voltage range shall be 100V to 300V. The LED Driver with SPD shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED Light shall have power factor more than 0.95 complete all as specified and directed.

Note for srl item No 54 to 62 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 2 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

M&L in replacement of earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and common salt and chemical surrounded with 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel with wire mesh and reinforced with welded steel wire fabric or XPM (weight not less thsn 4 Kg/Sqm) with cast iron frame, and 40mm bore GI protection pipe 'light grade' upto 7.5m including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.

M&L in replacement of earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead of copper strip 20x3mm by means bolt, nuts, check nuts and washer made of copper/bronze including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.

M&L in replacement of earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead ofgalvanised strip 25x6mm by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and common salt and chemical surrounded with 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel with wire mesh and reinforced with welded steel wire fabric or XPM (weight not less thsn 4 Kg/Sqm) with cast iron frame, and 40mm bore GI protection pipe 'light grade' upto 7.5m including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.

M&L for overhauling & servicing of electrically operated panels of hanger sliding steel door. Each panel of approximate size 3.5 to 4.0 Metre in width and 10 Metre in height and from any door of hangers by taking out mechanical parts and electrical connections & carry out repairs of motor, gear box assembly, electric control panel including replacement of unserviceable components / spares / greasing etc. complete and re-assemble / reconnect all the parts/portions including testing to ensure efficient and smooth functioning of door, both electrically & manually etc, complete all as specified and directed. Notes :- 1. Cost of replacement of all defective spares / parts except that covered in srl item No. 64.00 & 65.00 here-in-below are included in the job. 2. Rate shall be quoted for each panel.

Supply only gear of existing pattern / type and make of gear assembly of hanger door complete all as specified and directed.

Supply only gear box of existing make / pattern and type suitable for hanger door complete all as specified and directed.

Rewinding of electric motor 1.1 KW / 1.5 HP with super enamelled copper winding wire of same gauge including impregnated paper, varnish and tape etc complete for hanger door, complete all as specified and directed.

M&L for repair including rewinding of 3 phase AC induction motor of Cap - 1.5 HP, S1 duty, IP-55, 415 v AC (+/-) 10 %, RPM- 1415, efficiency - 78 %. Including dismantling and taking down old defective damaged motor carefullly from the existing sliding hanger doors by provn of suitable safety measures compete all as specified and directed.

M&L for repair inclincluding rewinding of 3 phase AC induction motor of Cap - 4-5 HP, S1 duty, IP-55, 415 v AC (+/-) 10 %, RPM- 1415, efficiency - 78 %. Including dismantling and taking down old defective damaged motor carefullly from the existing sliding hanger doors by provn of suitable safety measures compete all as specified and directed.

Supply, installation and testing of 200 Watt, optical design runway edge high intensity, yellow filter Bi-directional elevated halogen lamp light fitting with die-cast aluminium body and stainless steel hardware including bi-pin halogen lamp with all accessories such as base plate, breakable coupling mounting assembly, secondry lead conforming to relevant ICAO/FAA and IS including taking out existing unserviceable fitting of any type/description etc, complete all as specified and directed. Notes :- 1. Quoted rates shall be included for taking out existing unserviceable runway fitting and fixing of new fitting over existing transformer housing box. 2. Quoted rates shall be inclusive of alignment, levelling, filling gap with sealent and HT self amalgamating PVC insulated tape. 3. Quoted rates shall be inclusive of crimping plug and receptacle connector.

Supply, installation and testing of 200 Watt, optical design runway edge high intensity, Clear filter Bi-directional elevated halogen lamp light fitting with die-cast aluminium body and stainless steel hardware including bi-pin halogen lamp with all accessories such as base plate, breakable coupling mounting assembly, secondry lead conforming to relevant ICAO/FAA and IS including taking out existing unserviceable fitting of any type/description etc, complete all as specified and directed. Notes :- 1. Quoted rates shall be included for taking out existing unserviceable runway fitting and fixing of new fitting over existing transformer housing box. 2. Quoted rates shall be included of alignment, levelling, filling gap with sealent and HT self amalgamating PVC insulated tape. 3. Quoted rates shall be inclusive of crimping plug and receptacle connector.

Supply, installation and testing of 200 Watt, optical design runway edge high intensity, 180⁰ Green/Red filter Bi-directional elevated halogen lamp light fitting with die-cast aluminium body and stainless steel hardware including bi-pin halogen lamp with all accessories such as base plate, breakable coupling mounting assembly, secondry lead conforming to relevant ICAO/FAA and IS including taking out existing unserviceable fitting of any type/description etc, complete all as specified and directed. Notes :- 1. Quoted rates shall be inclusive of taking out existing unserviceable runway fitting and fixing of new fitting over existing transformer housing box. 2. Quoted rates shall be inclusive of alignment, levelling, filling gap with sealent and HT self amalgamating PVC insulated tape. 3. Quoted rates shall be inclusive of crimping plug and receptacle connector.

Supply, installation and testing of 200 Watt, optical design runway edge high intensity, Uni-directional approch elevated halogen lamp light fitting with die cast aluminium body and stainless steel hardware including bi-pin halogen lamp with all accessories such as base plate, breakable coupling mounting assembly, secondry lead conforming to relevant ICAO/FAA and IS including taking out existing unserviceable fitting of any type/ description etc complete all as specified and directed. Note:- 1. Quoted rates are inclusive of taking out existing unserviceable runway fitting and fixing of new fitting over existing transformer housing box. 2. Quoted rates are inclusive of alignment, levelling, filling gap with sealent and HT self amalgamating PVC insulated tape. 3. Quoted rates are inclusive of crimping plug and receptacle connector.

Supply, installation and testing of 45 Watt, optical design, Omni directional taxi way edge elevated halogen lamp light fitting with die-cast aluminium body and stainless steel hardware including bi-pin halogen lamp with all accessories such as base plate, breakable coupling mounting assembly, secondary lead conforming to relevant ICAO/FAA and IS including taking out existing unserviceable fitting of any type/description etc, complete all as specified and directed. Notes:- 1. Quoted rates shall be inclusive of taking out existing unserviceable runway light fitting and fixing of new fitting over existing transformer housing box. 2. Quoted rates shall be inclusive of alignment, levelling, filling gap with sealant and HT self amalgamating PVC insulated tape. 3. Quoted rates shall be inclusive of crimping plug and receptacle connector.

Supply, installation, testing and commissioning of 5KV, 50 Hz, series type isolating transformer encapsulated in polyester resin finally moulded with neoprene rubber suitable for 200/45 Watt, 6.6 Amps runway/taxi light luminaire conforming to relevant FAA/CAO and IS including taking out existing unserviceable transformer etc, complete all as specified and directed. Note :- Quoted rates shall be inclusive of taking out unserviceable transformer from housing box and fixing the new one including making necessary electrical connections.

S&F in replacement 200 Watt 6.6 Amps bi-pin halogen lamp including taking out existing fused lamp of any type/description etc, complete all as specified and directed.

S&F in replacement 45 Watt 6.6 Amps bi-pin halogen lamp including taking out existing fused lamp of any type/description etc, complete all as specified and directed.

S&F in replacement lamp holder for halogen lamp suitable for 200/45 Watt runway/taxi light fitting including taking out existing unserviceable lamp holder of any type/description etc, complete all as specified and directed.

S&F in replacement base plate with breakable coupling suitable for 200/45 Watt runway/taxi light fitting including taking out existing unserviceable coupling of any type/description etc, complete all as specified and directed.

S&F in replacement mounting assembly suitable for 200/45 Watt runway/taxi light fitting including taking out existing unserviceable mounting assembly of any type/description etc, complete all as specified and directed.

S&F in replacement Lens filter of any type/colour suitable for 200 Watt halogen Uni/Bi directional optical design high intensity runway light fitting including taking out existing unserviceable lens filter of any type/description etc, complete all as specified and directed.

S&F in replacement Lens filter of any type/colour suitable for 45 Watt Omni directional taxi way edge elevated halogen lamp taxi light fitting including taking out existing unserviceable lens filter of any type/description etc, complete all as specified and directed.

Servicing and monthly preventive maintenance of Five CCR panels controlling runway and taxiway halogen lamp light fittings including fault rectification and repair of printed circuit control card (thyristor type) by replacement of unserviceable spares viz transistors / ICs / resistance / capacitor etc. as and when required to keep the CCR Panel functional during contract period complete all as specified and directed. Notes :- (a) System shall be inspected / checked for preventive maintenance once in a month. (b) Quoted rates shall be inclusive of replacement of unserviceable spares viz transistors / ICs / resistance / capacitor etc. (c) Labour element for changing spares included in quoted rate. (d) Quoted rate shall include fault repair as and when required. (f) Printed circuit control card if replaced shall be included in quoted rates. (g) Replacement of unserviceable spares viz transistors / ICs / resistance / capacitor etc shall be of same makes as per existing in the CCR Panels. (h) One technician shall be provided by the contractor for opening of CCR panels/Runway & Taxi way lights as per flying schedule of AVN and all as specified and directed by Engineer-in-Charge. Provn of technicians shall be included in quoted rate.

Supply only printed circuit control Power card (thyristor type) suitable for 15 KW CCR panel to suit existing etc, complete all as specified and directed.

Supply only printed circuit control Master card (thyristor type) suitable for 15 KW CCR panel to suit existing etc, complete all as specified and directed.

Supply, laying and testing 6 sqmm, single core, 5KV grade stranded copper conductor PVC insulated and sheathed runway cable laid in trenches / wall / pipe jointed using plug receptacle including taking out unserviceable cable of any type / description etc, complete all as specified and directed. Notes :- 1. Excavation and earthwork required for dismantling and taking out cable will be measured and paid separately under respective items of BOQ. 2. Serviceable cable shall be segregated for reuse in same or new location, quoted rate are included for segregation for serviceable cable.

S&F in replacement plug receptacle connector (ESSMA) suitable for 5KW, 6 sqmm copper conductor cable etc, complete all as specified and directed.

S&F in repacement of 3 lines LCD display in 96x96 Sqmm flush mounted case Accuracy class 1.0 & 0.5 Panel mounted multi functional meters complete all as specified and directed.

S&F in replacement of panle indicator LED Lamps RYB - 03 Nos incl Green 04 Nos suitable for 240 VAC complete all as specified and directed.

S&F in replacement industrial panel socket of rating 16A -6h, 2P+Earth of cap 200-250 VAC complete all as specified and directed.

S&F in replacement industrial panel socket of rating 63A -6h, 3P+N+Earth of Cap 415 VAC complete all as specified and directed.

S&F in replacement of MCB TPN of Cap 32 Amps C series complete all as specified and directed. Note:- Cutting chases in walls/floors/ceilings wherever required for electric work shall be deemed to be included in respective item of Schedule ‘A’.

M&L for repair of compressor along with connected accessories after opening of connected item and repair the UNSV items as per site requirement and replace the defective part e.i. belt,pulley, connection wire fresh PVC pipe, nozzle and valve fan blade piston ring and gasket etc and reassemble the all items and testing complete all as spd and directed by Eng-in-Charge.

M&L for repair of turbo ventilator after opening gear mechanism , rotary axle and blade ring along with nut & bolt and replacement of unsv items like top cover , blade and rotary axle and throat ring spring washer etc as required to make functional of ventilator complete all as specified and directed. Note:- spare parts should be included in qouted rate.

Dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of AC ceiling fan motor1200mm/1400mm of any make of fan with super enameled heat resistant copper winding wire of existing gauge & nos of turns including, sleeve work, varnishing with E class insulation, greasing , threading, connection with flexible wire 0.472 mm copper wire upto connector block and re-assembling and testing for 4 Hrs after repair complete all as spd and directed ( Repairs will be measured and paid for separately under respective items) Note :- (i) Fan shall be collected by the contractor from site at thier own arrangement. (ii) Motor shall be wound with machine only and repair of fan inside complex/office of GE(S) Mamun. (iii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iv) Quoted rates are deems to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, capacitors clumps terminal connection , split pin spring washer etc.

All as per Srl item No 98 here-in-before but for cabin fan/wall mounted fan alongwith connected accessories minor repair i.e. body repair, clips and blade complete all as specified and directed.

Replacement of old unserviceable gun metal bush of ceiling fan complete all as specified and directed.

Replacement of old unserviceable capacitor AC 415 volts 2.5 mfd oil filed ISI marked complete all as specified and directed.

All as per Srl item No 101 here-in-before but 3.15mfd complete all as specified and directed.

All as per Srl item No 101 here-in-before but 4.5 mfd complete all as specified and directed.

Replacement of old unserviceable ball bearing of suitable size as per existing make and size of ceiling fan complete all as specified and directed.

Replacement of old unserviceable ball bearing of suitable size as per existing make and size of exhaust fan/wall mounted Fan complete all as specified and directed.

Replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.

Replacement of old unserviceable fan blades as per existing shape, colour and design suitable for 1200mm sweep ceiling fan complete all as specified and directed.

Replacement of old unserviceable fan blades, as per existing shape, colour and design, suitable for 1400mm sweep ceiling fan complete all as specified and directed.

Repalcement of old unserviceable down rod of ceiling fan complete with split pin, hanging clamp and rubber real (length of rod not less than 45cm and not more than 60cm) complete all as specified and directed.

Servicing of ceiling fans of capacity 1200/1400mm including taking down from site , dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, cup of both side and refixing to the existing site after servicing complete all as specified and directed.

Servicing of exhuast fans of capacity up to 450 mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of outer gasket and nut & Bolts incl cleaning of outer part & fixing wall and refixing to the existing site after servicing complete all as specified and directed.

Supply and fixing cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5 sqmm complete all as specified and directed.

Dismantling and Re-winding of exhaust fan/industrial wall mounting fan/pedstral fan motor 250-380mm sweep any make of fan with super enameled heat resistant copper winding wire 31 SWG to 34 SWG including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation greasing, threading, connections with twin core copper flexbile wire of size 23/0.0076mm of length not more than one mtr with each fan complete all as specified and directed. Note :- (i) Exhaust Fan/pedestal fan shall be collected by the contractor from MES store yard at thier own arrangement. (ii) Motor shall be wound with machine only and repair of fan inside complex/office of GE(S) Mamun. (iii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iv) Quoted rates are deems to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, capacitors clumps terminal connection , split pin spring washer etc.

All as per Srl item No 113.00 above but 400mm-450mm sweep as per site requirement complete all as specified and directed.

All as per Srl item No 113.00 above but 500mm-750mm sweep complete all as specified and directed.

Removing old paint by scraping with sand paper including washing and filling cavaties with filter and applying two coats of painting to ceiling fan 1200-1400mm sweep at workshop with heat resistant synthetic enamel paint by spray painting incl, writing MES No on the ceiling fans complete all as specified and directed. Note:- Paint qaulity and colour shall be get approved from GE.

Replacement of old unserviceable outer body of ceiling fan (bottom and uper cover plate incl all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed.

Replacement of old unserviceable electronic fan regulator step type hum free heavy duty 230 volts on existing laminated sheets complete all as specified and directed.

Supply and replacement existing unserviceable canopy top & bottom of ceiling fan as per existing size & shape complete all as specified and directed.

Supply and replacement existing unserviceable shutter and lover of exhaust fan as per existing size & shape complete all as specified and directed.

Supply and replacement existing unserviceable MS fan blade of exhaust fan as per existing size & shape complete all as specified and directed.

Supply and replacement existing unserviceable PVC fan blade of exhaust fan as per existing size & shape complete all as specified and directed.

M&L for lathe work including re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed by Engr-in-Charge.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable 8cm below and 15cm above the cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty electric cable , with aluminium conductor of size 16 Sqmm x 2 core complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

All as per Srl item No. 129.00 here-in before but LT XLPE cable of size 16 Sqmm x 4 core complete all as specified and directed.

All as per Srl item No. 129.00 here-in before but LT XLPE cable of size 50 Sqmm x 3.5 core complete all as specified and directed.

All as per Srl item No. 129.00 here-in before but LT XLPE cable of size 120 Sqmm x 3.5 core complete all as specified and directed.

All as per Srl item No. 129.00 here-in before but LT XLPE cable of size 240 Sqmm x 3.5 core complete all as specified and directed.

All as per Srl item No. 129.00 here-in before but LT XLPE cable of size 300 Sqmm x 3.5 core complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 25 sqmm to 50 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 70 sqmm to 120 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 150 sqmm to 185 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 240 sqmm to 400 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable straight through joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 25 sqmm to 50 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable straight through joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 70 sqmm to 95 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supply and fixing in replacement GI tubing light grade 40 mm bore cut to size and fixed along the pole for cable protection including clamp 02 Nos of size 25x4 mm, nut bolts , washers etc complete all as specified and directed.

Supply and fixing in replacement GI tubing light grade 800 mm bore cut to size and fixed along the pole for cable protection including clamp 02 Nos of size 25x4 mm, nut bolts , washers etc complete all as specified and directed.

S&F in replacement optimum adjustable range MCCB FP 415 volts, 100 Amps rating with rupturing capacity 25 KA including providing thimble for out going cables and taking out unserviceable MCCB FP of any deccription / type etc. complete from LT Panel, complete all as specified and directed.

S&F in replacement optimum adjustable range MCCB FP 415 volts, 160 Amps rating with rupturing capacity 36 KA including providing thimble for out going cables and taking out unserviceable MCCB FP of any deccription / type etc. complete from LT Panel, complete all as specified and directed.

S&F in replacement optimum adjustable range MCCB FP 415 volts, 200 Amps rating with rupturing capacity 36 KA including providing thimble for out going cables and taking out unserviceable MCCB FP of any deccription / type etc. complete from LT Panel, complete all as specified and directed.

S&F in replacement optimum adjustable range MCCB FP 415 volts, 250 Amps rating with rupturing capacity 36 KA including providing thimble for out going cables and taking out unserviceable MCCB FP of any deccription / type etc. complete from LT Panel, complete all as specified and directed.

S&F in replacement optimum adjustable range MCCB FP 415 volts, 350 Amps rating with rupturing capacity 36 KA including providing thimble for out going cables and taking out unserviceable MCCB FP of any deccription / type etc. complete from LT Panel, complete all as specified and directed.

S&F in replacement optimum adjustable range MCCB FP 415 volts, 400 Amps rating with rupturing capacity 36 KA including providing thimble for out going cables and taking out unserviceable MCCB FP of any deccription / type etc. complete from LT Panel, complete all as specified and directed.

Supply and fixing as in reapir/replacement of pole mounted street light factory fabricated junction box of size 260mmx160mmx250mm of approved make and of appropriate size made out of 2 mm thick CRCA powder coated sheet , including 63A ,Three Phase four wire having four no.AL Bus Bar including 6A SP MCB. The box should have auto Door Lock facility with magnetic Lock having Sizehaving Size box fixed on pole using necerssary fixing arrangement such as clamps,nut,bolts and washer including taking down existing junction box of any description/type etc complete all as specified and directed.

Supply, installation, connecting electrically and testing in replacement of street light panel box complete with Astronomical timer ,contactor rating 65 Amp, MCB 63 A TPN complete for mounted made out of CRCA sheet 1.6 mm thick, powder coated, having provision for Astronomical Timer, Contactor, Toggle switch, SP MCBs and MCCBs etc. having self closing door lock complete with fixing clamps or mounting arrangement all as required at site, specified or directed including taking out existing U/S street light switch any type and size complete all as specified and directed.

Supply and fixing in replacement of digital display Astronomical timer switch used to control various loads according to sunrise time of contact rating 16 Amp, AC1 with USB key, 1 change over including backup of 6 years USB for program down load and upload daily, weekly, program complete all as specified and directed.

S&F in replacement of contactor four pole 63 Amps with operating coil voltage 230V complete with manual operating knob in case of coil faliure including making necessary connections using appropriate copper bus bar or PVC insulated cable with copper conductor and lugs as required at site complete all as specified and directed.

M&L for repairing, servicing and replacement of LT panels unserviceable part including complete brocken accessories such as partialy open door, brocken door, unserviceable aluminium bus bar, unserviceable/brocken locking arrangement, repairing of LT panel legs, welding work, necessary PCC work, excavetion and earth work including disconnection and reconnection of cables with suitable size of aluminium lugs in proper engineering practice, for any size of cables in any capacity LT panel also fixing of LT danger notice plate both side of the panel complete all as specified and directed.

M&L for painting of LT panel after removing old dust particles, oily portion by rubbing with sand paper and painting a coat of syntehtic enamel paint with spray pump, and writing/digital printing, capacity description, date of installtion, etc complete all as specified and directed.

M&L for scraping of old paint from the steel tubular pole 9 Mtr height with out removing accessories and preparation of surfaces, repainting the pole with one coat of alternative green and white strips of 30cm each upto 1.5 Mtr height using synthetic enamel paint. Marking the pole number with black enamel paint over yellow circle of dia 100mm. Repainting the remaining pole and iron parts i.e 'U' clamps, channels etc above 1.5 mtr height by applying two coat of alumn paint, incl. writting letters or figures (Block, Roman, Italic or Indian) S/L Pole No and location code n. exc. 30cm high, commas, short lines, dashes, hypens, brackets etc complete all as specified and directed.

M&L for painting of PCC pole 11 mtr height without removing accessories with one coat of alternative green and white strips of 30cm each upto 1.5 Mtr height using synthetic enamell paint . marking the pole number with black synthetic enamel paint over yellow circle of dia 100mm. Painting the steel parts i.e clamps, channels etc by applying one coat of alumn paint all as required at site, complete all as specified and directed.

Taking down street light fitting or flood light fitting any type and rating from poles, walls or any other indicated situation/location after disconnecting electrically, and refixing after repair at same location or any other and removing unserviceable fittings from site complete all as specified and directed.

S&F in replacement of MH lamp 250 watt tubular clear lamp on location including disconnecting and taking out existing lamp any type from light fitting complete all as specified and directed.

S&F in replacement heavy duty VPIT open construction copper ballast 250 watt HPSV/MH for street light or flood light fitting including disconnecting and taking out existing unsv ballast of any type from light fitting complete all as specified and directed.

S&F in replacement ignitor electronic 230V suitable for 150/250 watt HPSV/MH for street light or flood light fitting including disconnecting and taking out existing unsv ignitor of any type from light fitting complete all as specified and directed.

S&F in replacement of porceilan lamp holder suitable for 150/250 watt HPSV/MH for lamp with base E 40 complete all as specified and directed.

S&F in replacement electronic driver ISI approved made as per existing make and size suitable for LED fittings of capacity from 60 to 120 watts any type and make complete all as specified and directed.

S&F in replacement electronic LED security light driver (ISI approved) made as per existing make and size suitable for LED fittings of capacity from 180 to 400 watts any type and make complete all as specified and directed. Note:- Cutting chases in walls/floor/ceiling where ever required for electric work shall be deemed to be encluded in respective of items of BoQ.

KULBHUSHAN AGGARWAL

Standard engineers

Bidder Name

Standard engineers

KULBHUSHAN AGGARWAL

M/S MULTI ENGINEERS