Special repair of security lights system from Thomas Bridge to Supply Morh under GE (Utilities) Udhampur .

Amount

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr in depth for laying of under ground cable and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge.

Returning filling in excavated soil in trenches including spreading , levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed by Engr-in-Charge.

Removing of excavated soil to a distance n exc 50mtr and deposited where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed by Engr-in-Charge.

Supply and fix XLPE insulated , armoured heavy duty electric cable with aluminium aluminium conductor, 1100 volts grade , cross section area complete all as specified and directed by Engr-in-Charge.

2 core 10 sqmm.

3.5 core 25 sqmm.

Double walled corrugated pipe (DWC) of size 40 mm conforming to IS:14930(part-II)/IS 16205 Part II with necessary snap fit coupler complete all as specified & directed by Engr-in-Charge.

Supply and fix LED street light fitting 200/210 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge.

Supply and fix LED flood light, 200 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge.

Bollard light (opti space Bollad) LED, type 11 Watts to 15 Watts, 230 V AC 5000 lumen outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection complete all as specified and directed by Engr-in-Charge. Note: Excavation RFR and necessary PCC foundation alongwith hardware (For fixing arrangements) are deemed to be inclusive in unit rate quoted.

Supply and fix LED street light fitting 120 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge.

S&F in replacement of automatic street light control switch of 8 KW three phase using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitabe rating power contractor (s), one Incoming and three Outgoing MCBs rating of 20-32 Amps & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection class-2. The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified & directed by Engr-in-Charge.

Two single core PVC insulated and sheathed copper conductor cable 2.5 Sqmm nominal size and one single core PVC insulated and sheathed copper conductor cable 2.5 Sqmm nominal size for earth continuity from main lines to the street light fittings after removing u/s one complete all as specified and directed by Engr-in-Charge.

Terminal box made out of SMC with hinged door and locking arrangements of size 140x140x95mm (in repair) including Backlite 4 way connector,M.S. Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections including MCB SP 6-32 Amps complete all as specified and directed by Engr-in-Charge.

S &F LED Tiranga Rop light 18 Mtr,IP 65,Input Power 10W/meter,Input Voltage 220-240 VAC Input frequency 50 Hzs,Input current 0.045 Amp/Mtr,Power factor 0.95,Width of strip(+/- 0.1 mm) 8 mm length/reel-18 mtrs,No of led per mtr 120 LED,LED Beam angle 120 degree ,Rope light per Colours length 6 mtr orange, 6 mtr white ,6 mtr Green,Fixing method silicone clip ,Ingrass Protection -IP -65, Ingrass protection method silicone tube ,silicone tube dimention 11.5x5.5 mm+/- 0.5 mm,working temp range-20 degree celcius to + 45 degree celcious ,working humidity range 10-90 RH complete all as specified and directed by Engr-in-Charge. Make: HPL/Wipro/Philips

Supply and fix GI tubing brackets, 40mm bore, light grade with new GI tubing bracket, 40mm bore, light grade, 1.20 metre length ,made to shape including MS clamp with nuts, bolts and washers etc complete all as specified & directed by Engr-in-Charge.

Painting to steel tubular poles 9/12 metre long with two coats of aluminium paint including brackets, clamps, nuts bolts, washer etc. including making Tri colour strips alternatively (30 cm width each) on pole upto 1.5 metre from the ground level and marking of pole Nos with black paint having back ground yellow as per existing complete all as specified & directed by Engr-in-Charge.

Taking down old/Vintage LT feeder pillar box from the circuit system and S&F new LT feeder pillar box of following nomenclature as illustrated below:- Type:- System integrator switchgear/Channel Partner. Switchgear. Panel Sheet thickness:- 3.15 mm CRCA. Voltage:- 415V, 3 Phase, 50HZ. Bus Bar:- Copper bus bar shall be 1.5 times of incomer MCCB. Type:- Outdoor Panel. Base:- Angle iron 50x50x6 mm. Accessories:- Indication lamps (R,Y,B) CTs (required incomer size), Voltmeter, Ammeter, Cables glands whereever required. Wiring:- Wiring shall be 2.5 sqmm for acc. (Copper) Size of Panel:- Size as per switchgear accomodation,double door system,hinges to be provided, powder coated to complete panel. Foundation:- PCC foundation, M-15,Type C-1 according to panel including PCC coping,M-15. Incoming:- (i)MCCB 4 pole , Ics=100%Icu- 36 KA, 415 Volts, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals -01 Nos. Outgoing:- (i)MCCB 4 pole , Ics=100%Icu- 36 KA, 415 Volts, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals -03 Nos.

slathia construction works

HIMALAYA ENTERPRISES

vijay kumar gupta and co

M/S Builders Indias

Kanwal Enterprises

shivom builders

PREM NATH KHAJURIA AND SONS

FANGALIA TRADERS

M/S Inderjit Sharma and Co.

D P ASSOCIATES