REPAIR MAINT OF EXTERNAL INTERNAL ELECTRIFICATION IN CAMERO SMQ SNCOs AIRMEN BILLETS UNDER GE AF SUBROTO PARK

Amount

Taking down carefully copper/aluminium point wiring( light ,fan, socket or power) complete, fitting such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5sq mm PVC insulated Surface conduit unsheathed 1100 v grade IS -694 stranded copper conductor FRLS cable drawing including and into PVC conduit not less than 20 mm dia in wall / surface/concealed including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire connected to main earth dolly for one light point controlled by one switch complete all as specified and directed by Engineer in Charge.

All as per srl item 2 above but for one C/ fan/Exhaust fan point controlled by one switch regulator complete all as specified & directed by Engineer-in-Charge

All as per item No 2 above but for one 3 pin 5 amps socket outlet on indipendent board with other switchs complete all as specified & directed by Engineer-in-Charge

All as per item No 2 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as specified & directed by Engineer-in-Charge

All as per item No 2 above but for one light point controlled by two way switches complete all as specified and as directed by Engr-in-Charge.

All as per item No 2 above but for Call bell controled by one push button in indipendent board all as specified and as directed by Engr-in-Charge.

All as per item No 2 above but with 2.5 Sq mm cable for Independent one 3 pin 15 Amps socket outlet In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire complete all as specified and directed by Engineer-in-Charge

M&L for point wiring for one light fitting / one fan point controled by one switch with 1.5 Sq mm PVC insulated copper conductor cable drawing in and including PVC Casing/capping with 1.5 Sq mm PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly with 3mm thick plastic laminated sheet cover complete for one light/fan point controlled by one switch complete all as specified and directed by Engineer in Charge.

All as per srl item 9 above but for one fan point controlled by one switch through regulator complete all as specified and as directed by Engr-in-Charge.

All as per srl item 9 above but for one 5 pin 5 amps socket outlet on the independent board complete all as specified and as directed by Engineer-in-Charge

All as per item No 9 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as specified and as directed by Engr-in-Charge.

All as per item No 9 above but for Call bell point complete all as specified and as directed by Engineer-in-Charge

All as per item No 9 above but with 2.5 Sqmm PVC insulated stranded copper conductor cable for one 3 pin 15 Amps socket outlet. In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multi stranded copper conductor cable drawing in existing steel/PVC conduit with 1.5 Sq mm PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly excluding 3mm sheet metal box and hylam sheet complete for one light/fan point controlled by one switch complete all as specified and directed by Engineer in Charge.

All as per srl item 15 above but for one fan point controlled by one switch through regulator complete all as specified and as directed by Engr-in-Charge.

All as per srl item 15 above but for one 5 pin 5 amps socket outlet on the independent boardcomplete all as specified and as directed by the Engineer in Charge

All as per item No 15 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as specified and directed by Engr-in-Charge.

All as per item No 15 above but for one light point controlled by two way switches complete all as specified and as directed by Engineer-in-Charge

All as per item No 15 above but for Call bell point complete all as specified and as directed by Engr-in-Charge.

All as per item No 15 above but with 2.5 Sq mm PVC insulated stranded copper conductor cable for one 3 pin 15 Amps socket outlet. In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire complete all as specified and as directed by Engineer-in-Charge

S&F in replacement switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site. Make: Anchor penta PC/Kinjal/SSK

S&F in replacement switch piano, flush type single pole, two way, 5 Amps, 240 volts all as specified and directed at site. Make: Anchor penta PC/Kinjal/SSK

S&F in replacement switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed at site. Make: Anchor penta PC/Kinjal/SSK

S&F in replacement socket outlet 5 pin 5 Amps all as specified and directed at site. Make : Anchor penta PC/Kinjal/SSK

S&F in replacement socket 16 Amps, 2 in 1, flush type all as specified and directed at site by Engineer-in-Charge :

Supply and fixing in replacement ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body all as specified and directed at site by Engineer-in-Charge

Supply & fix in replacement bell push, flush type, 5 Amps, 240 volts all as specified and directed at site by Engineer-in-Charge :

Supply only in replacement Electric calling Bell Ding Ding Type suitable for 230 volts complete all as specified and as directed by Engr-in-Charge. Make: Anchor/Kinjal/SSK

Supply only Fan Regulator step type 120 watt, 240 volt complete all as specified and directed by Engineer-in-Charge : Make: Havells Cat Pt No: AHORFXW004/ equivalent in Anchor/SSK.

M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. For One light point/c fan/ Exh fan controlled by one switch one way.

All as per item No 31 above but for one 3 pin 5 amps socket outlet on indipendent board with other switchs complete all as specified and directed by Engineer-in-Charge

All as per item No 31 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as specified and directed by Engineer-in-Charge.

All as per item No 31 above but for one light point controlled by 2 Nos two way switches complete all as specified and directed by Engineer-in-Charge ,

All as per item No 31 above but for Call bell controled by one push button in indipendent board complete all as specified and directed by Engineer-in-Charge

All as per item No 31 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps complete with screw and necessary arrangement complete all as specified and directed by Engineer in Charge.

All as per srl item 37 above but for one 5 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

All as per srl item 37 above but for one 15 amps switch socket outlet complete all as specified and directed by Engineer-in-Charge

S&F in repair of sub main wiring with 2 single core 04 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in and incl rigid non metallic PVC conduit 25 mm dia incl 4.0 Sq mm PVC insulated single core copper conductor cable for continuous earth wire complete all as specified and directed by Engineer-in-Charge

Same as per Item No 40 but with 2 single core 06 Sq mm incl 6 Sq mm PVC insulated single core copper conductor cable for continuous earth wire complete all as specified and as directed by Engr-in-Charge.

M & L for rigid non metalic PVC medium grade conduit including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engr-in-Charge.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 230 volt MCB 20 amps complete all as specified and as directed by Engr-in-Charge.

Dismantling of unserviceable light fitting of any type and wattage from the buildings after disconnecting the electric supply and keeping in safe custidy for giving credit to the contractor all as specified and directed by engr-in-charge.

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Havells /Philips/Crompton Greaves.

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and fixed on two PVC round blocks testing complete all as specified and directed by the Engineer- In- Charge. Make: Havells /Philips/Crompton Greaves.

Supply and fixing decorative LED wall light Nickel fitting premium opal glass for reduced glare designed for use with energy saving light bulbs suitable for 9/11 watt LED with 100 lumen/watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Philips /Havells/OSRAM. Note :- Rates of LED bulb are deemed to be included in quoted rate

Supply and fixing ultra slim surface decorative 12 watt with 100 lumen/watt, 6000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Havells /Philips/Crompton Greaves

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Havells /Philips/Crompton Greaves.

S&F ultra modern design architectural design 34 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge. Make Havells/Philips/CG.

S&F in replacement of exhaust fan heady duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton Greaves.

S&F in replacement of exhaust/ ventilating fan heady duty metal body type 230 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of exhaust/ ventilating fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of wall mounting fan heady duty 300 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Model No- Swing Penta Wall Fan.

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

Taking down old unsv MCB DB of any size complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement load line vertical distribution board 'A, frame made out of CRCA 2mm thick mild steel sheet,double door, surface mounting TPN 8 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 125 Amps =01 No MCB for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 125 Amps =01 No MCB for outgoing comlete all as specified and as directed by Engineer-in-Charge. Cat Part No - DB LL4W DD VERT W/O MCCB Make - Havells or equivalent to Standard Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type Cat Part No - DHDPSHODRW08 complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent to Standard/Asian Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type regal gray horizontal type Cat Part No - DHDPSHODRW08 complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent to Standard/Asian Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 16 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 40 amps C Curve capacity complete all as specified and as directed by Engr -in - Charge. Make: Havells/C&S/Standard

Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, and neutral, 240 volts, 40 amps C Curve capacity complete all as specified and as directed by Engr -in - Charge. Make: Havells/C&S/Standard

S&F MCB TP 63 Amps 10 KA, 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells/C&S/Standard

S&F MCB TP 100 Amps 10 KA 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells/C&S/Standard

S&F in replacement of domestic use electronic ballast suitable for FTL 1X36/40 watt complete all as specified and directed by Engr-in-Charge. Make - Havells/Bajaj/philips.

S&F in replacement of Starter universal for 240 volt 18/20/36/40 watt FTL complete all as specified and directed by Engr-in-Charge. Make - Havells/Bajaj/philips.

S&F in replacement tube rod 14 watt, T5, 6500 K cool white complete all as specified and as directed by Engr-in-Charge. Make: Philips/ Havells/ CG.

S&F in replacement LED Tube rod 20 watt complete all as specified and directed by Engineer in Charge. Make: Philips/CG/Havells

S&F LED Bulb 9 watt retrofit type 2700K (Yellow/white colour) complete all as specified and directed by Engineer-in-Charge Make- Havells Osram/Philips/Bajaj.

S&F in replacement of fan capacitor with copper wire plastic body 2.5 mfd complete all as specified and directed by Engr-in-Charge.

S&F in replacement of fan capacitor with copper wire plastic body 3.15 mfd complete all as specified and as directed by Engr-in-Charge.

Taking down the old white hylium sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 8" x 10" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 73 above but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 73 above but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 73 above but of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.

S&F Non Retrofit CFL 11 watt two pin 2700K (Yellow colour) complete all as specified and as directed by Engr-in-Charge. Make:Bajaj/ Havells/Philips.

Supply & fix in replacement Batten Holder PVC white suitable for retrofit type CFL/LED Lamp cxomplete allas specified and as directed by Engr-in-Charge.

Supply & fix in replacement of Fluorescent Tube Light rod 28 watt complete all as specified and as directed by Engr-in-Charge. Make : Havells / Philips / C & S

Supply & fix in replacement of Casing capping double lock type supper quality size 20 mm width ISI marked with fixing accessories complete all as specified and directed by Engineer in Charge.

Supply & fix in replacement of brass screw 3/18, long threaded suitable for fixing switch boards. ( 100 Nos in one packet) complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement of brass screw 9/11, long threaded suitable for fixing switch boards. ( 100 Nos in one packet) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement of stainless steel screw 1/2" long. ( 200 Nos in one packet) complete all as specified and as directed by Engr-in-Charge.

Supply & fix in replacement of stainless steel screw 1" long.( 200 Nos in one packet) complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of flexible wire twin core 23/.076 complete all as specified and as directed by Engr-in- Charge.

Supply and fix in replacement of twin core aluminium flexible wire conductor of size 10 sq mm 2 core complete all as specified and as directed by Engr-in- Charge.

Excavation in trenches in hard and dense soil n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipe,foundation for poles, stay, laying cables etc and getting out copmlete all as directed by engineer-in-charge.

Returning filling in including spreading, leveling watering and well ramming in layers n. exc 25 cm in hard/dense soil copmlete all as directed by engineer-in-charge..

Removing excavated material n.exc 50 meters and depositing where directed at a level n.exc 1.5 meter above the starting point copmlete all as directed by engineer-in-charge.

M&L for Sand cushioning of cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable copmlete all as directed by engineer-in-charge.

Supply and laying well burnt sub class ‘B’ bricks old size as mechanical protection to under ground cables laying across the cable copmlete all as directed by engineer-in-charge.

Supply and laying GI pipe light grade galvanized with all fittings laid in trenches or fix on wall for cable protection of 80 mm bore copmlete all as directed by engineer-in-charge.

All as per srl item No 92 above but size 50 mm bore copmlete all as directed by engineer-in-charge.

All as per srl item No 92 above but size 40 mm bore copmlete all as directed by engineer-in-charge.

Disconnecting,removing & taking out faulty U/G cable off sizes from trenches,wall and ducts complete all specified and as directed by Engr-in-Charge.

Supply, Laying, Testing and connecting cable XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade cross section area of 300 sqmm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 96 above but size 185 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 96 above but size 50 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 96 above but size 35 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 96 above but size 10 Sq mm x 2 core copmlete all as directed by engineer-in-charge.

Material and labour for cutting of road/ hard standing up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of cable protection pipe including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1 and block top with black bituminous upto existing surface level complete all as specified and as directed by Engineer-in-charge.

Preparation of old painted surface of steel tubular swaged poles (9 to 11 meter long) with good neck brackets including junction box, GI pipe and light fittings i.e HPSV/HPMV any rating and painting with one coat of aluminium paint including cleaning the acrylic cover and painting with black to 1.5 mtr height from top of PCC coping and marking pole numbers with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge Make of the paint : Shalimar/Asian/Nerolac/Berger

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron strip 25 x 4 mm as earth lead by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. Note :- PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI)

Material and labour for galvanised iron strip 25 X 4 mm with saddles and fixing screws and connected as per site requirement comlete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of MCCB 400 Amps FP 415 volts 3 phase 50 HZ with Adjustable Thermal & adjustable Magnetic setting of rapturing capacity 35 KA complete all as specified and as directed by Engr-in-Charge. Make-Legrand/Havells/L&T.

S&F in replacement of MCCB 250 Amps FP 415 volts 3 phase 50 HZ with Adjustable Thermal & adjustable Magnetic setting of rapturing capacity 35 KA complete all as specified and as directed by Engr-in-Charge. Make-Legrand/Havells/L&T.

S&F in replacement of MCCB 200 Amps FP 415 volts 3 phase 50 HZ with Adjustable Thermal & adjustable Magnetic setting of rapturing capacity 35 KA complete all as specified and as directed by Engr-in-Charge. Make-Legrand/Havells/L&T.

S&F in replacement of MCCB 125 Amps 415 volts 3 phase 50 HZ with Adjustable Thermal & adjustable Magnetic setting of rapturing capacity 25 KA complete all as specified and as directed by Engr-in-Charge. Make-Legrand/Havells/L&T.

S&F in replacement of MCCB 100 Amps 415 volts 3 phase 50 HZ with Adjustable Thermal & adjustable Magnetic setting of rapturing capacity 25 KA complete all as specified and as directed by Engr-in-Charge. Make-Legrand/Havells/L&T.

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 250 Amps for incomer and MCBs for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCCB/MCB shall be measured and paid seperately.

Disconnecting to worn out cable off size from main control panel /LT over head line cutting worn out portion and reconnecting including suitable size of aluminium lugs & thimbles ,nuts, bolts & washers comlpete (excavation of necessary earth work shall be measured and paid separately complete all as specified and as directed by Engineer-in-Charge.

M&L for taking down street light, garden light and flood light fitting etc complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of powder coated aluminium dia castand spun aluminium with clear/opal diffuser suitable for landscape lighting post top fitting,energy saving, environment friendly, long life aesthetically designed with good indriect symmetrical light distribution, die - cast aluminium landscape luminiaire with 40 watt LED 5700 K all as specofoed and directed bu engineer - in- charge. Make : Havells/CG/PHILIPHS.

S&F in replacement Highly efficient mid power LED street light 48 W with pressure die cast aluminium housing, reflector and enclosed with toughened glass IP65. with 2 single cable PVC insulator unsheathed 2.5 Sq mm with stranded copper conductor fixed on pole/wall/building complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of energy saving and enviornmental friendly long life versatile pressure die cast aluminium IP 65 roadway luminaire with high power 70 watt LED , 6000K , with electronic driver, general spread, all accessories pre-wired and electric connection using PVC insulated and sheathed 1100 volts grade cable with copper conductor of size 2.5 sqmm complete with provn of nuts and bolts fixing on walls/poles etc. complete all as specified as specified and as directed by Engr-in-charge. Make : Philips / Havells / CG

Supply and fix in replacement of energy saving and enviornmental friendly long life versatile pressure die cast aluminium IP 65 roadway luminaire with high power 150 watt LED , 6000K , with electronic driver, general spread, all accessories pre-wired and electric connection using PVC insulated and sheathed 1100 volts grade cable with copper conductor of size 2.5 sqmm complete with provn of nuts and bolts fixing on walls/poles etc. complete all as specified and as directed by Engr-in-Charge. Make : Philips / Havells / CG

S&F in replacement of 200 watt LED 6000K energy saving, enviromental friendly, long life, exclusive innovative die- cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces complete all as specified and directed by engineer-in-charge. Make : Havells/Philips / CG.

S&F in replacement of pin type,porcelain,vitreous,white,brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 100 mm height,65 mm dia for 1100 volts grade complete all as sprcified and as directed by engineer-in-charge.

S&F in replacement of shackle type, porcelain, vitreous, white,brown or green insulator 1100 Volts LT of size 100 mm high and 115 mm dia including galvanised mild steel straps of size 31x5 mm, washers, insulator bolts 14 mm dia,washers and nuts etc complete all as sprcified and as directed by Engr-in-Charge.

M&L for cutting/trimming of branches of tree tuching/aproaching LT over lines of various spans(having 40 to 45 mtr) up to 3 mtr width on each side from difrent site of grith up to 10 cm with cutting equipments hacksaw,axe,ladders,rope and safety measures etc including disposal of trimmed branches 100 mtr away inside the cantonment area and cleaning the ares complete all as specified and directed by Engineer-in-charge.

M&L for re-streaching of loose LT over head line,aluminium conductor,GI guard wires and credals etc complete at various location and difrent span of 2 to 7 conductors with the help of rope and pullar etc complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of flexible conduit pipe of size 25 mm siutable for insertion of electric wires etc complete all as specified and as directed at site by Engr-in-charge.

M&L for precast cement concrete block masonry with solid blocks,exceeding 10 cm in width and setting in mortar type B1, 1:2:4 using 20 mm graded aggrigate complete all as specified and as directed by Engr-in-Charge.

Supply and fix tape insulation PVC 25 mm wide in various colours of standard length complete all as specified and as directed by Engineer-in-Charge.

S&Fceiling fan 1200mm sweep 230 Volt, 1400 RPM including necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make: Havells/CG/Bajaj/Orient/Khetan.

LAMBA ENTERPRISES

shiva enterprises

JAIPAL AND BROTHERS

Hindustan Co.Co

M/S MG GROUP

BRIJ MOHAN LAL AND CO.

M/S LADPURIA ENTERPRISES

J.P. Enterprises