Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹9.4 L
Closing Date
4 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
23 conditions · 12 needing a document upload
As per IRSGCC 2022 (including correction slips and amendments) as on date of publishing of tender
11.4. Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
11.5. Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI of GCC April 2022.
11.6 Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India or entity authorized by RBI to do so for the relevant date or immediately previous date for which rates have been published. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date or immediately previous date for which rates have been published. [Explanation for Para 10 of the Tender Form (Second Sheet) including Para 10.1 to 10.5 - Eligibility Criteria: 1. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2. In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials 4. In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work
5. If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet), the same shall be considered for the purpose of fulfillment of credentials. 6. In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility. 7. In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution / split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, t 8. he credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 9. In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm (e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs 10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs 6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 10. In case of existing partnership firm if any new partner(s) joins the firm without any modification in the name and PAN/TAN no. of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item 6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. 11. Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners.
12. In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will be passed on to the successor 13. If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value. 14. In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not be added in partnership firm AB. 15. In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. 16. In case company A is merged with company B, then company B would get the credentials of company A also.
As per IRSGCC 2022 (including correction slips and amendments) as on date of publishing
Electrical License : The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 11 kV. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 11 kV. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 11 kV shall be summarily rejected. (Ref: Hqrs Lr.No :E.29/P/Similar nature of works Dt: 07.05.2026)
11.3(i) Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last07(seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakhs, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for Item 11.3(ii): Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs.500 crore and above in last 3 financial years excluding the current financial year, listed on National StockPa Egex c2h7/a3n3ge or financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case of non submission of such certificates, tender will be summarily rejected. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. (a) For Works without composite components The technical eligibility for the work as per para 10.1 above, shall be satisfied by either the ' JV in its own name & style' or 'Lead member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for the work as per para l0.l above, shall have technical capacity of minimum 10% of the cost of work i.e., each non-lead member of JV member must have satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum off 10% of advertised value of the tender. (b) For works with composite components The technical eligibility for major component of work as per para l0.l above, shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV' and technical eligibility for other component(s) of work as per para 10.1 above, shall be satisfied by either the 'JV in its own name & style' or 'any member of the JV'. Each other(non-lead)member(s)of JV, who is /are not satisfying the technical eligibility for any component of the work as per-par l0.l above, shall have technical capacity of minimum 10% of the cost of any component of work mentioned in technical eligibility criteria. i.e., each other (nonlead) member of must have satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum- of 10% of cost of any component of work mentioned in technical eligibility criteria. Note for Para 17.15.1:a) The major component of the work for this purpose shall be the component of work having highest value. In cases where value of two or more component of work is same, any one work can be classified as Major component of work b)Value of a completed work done by a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above mentioned technical eligibility criteria in the tender under consideration.
Similar nature of work: - "Works of wiring /cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements earthings etc. (with or without supply of items/equipments) for 230 V, 1 phase or 415 V, 3 phase system or higher voltages." (Ref: Hqrs Lr.No:E.29/P/Similar nature of works Dt: 30.12.2014.)
28 conditions · 11 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For the tender value above Rs.20.0 crores, the tenderers should submit Bid capacity statement in the prescribed proforma (As per GCC) duly verified by Chartered Accountant. In case, the tenderer/s failed to upload Bid Capacity Proforma along with offer, their /his offer shall be considered as incomplete and will be rejected summarily
Tender value is including escalation of (-)10% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e OS/Tenders/GS/SC Division) as indicated in the tender document Before closing date for submission of bids. (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Gati Shakti - Secunderabad Division: Rajura - MAGH-GDCR Section- Development of Freight Train Examination Facilities at Rajura Station - Electrical arrangements
C-E-GS-SC-10-OT-2025-26~SCR
C-E-GS-SC-10-OT-2025-26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹9.4 L
14 Aug 2026
14 Aug 2026
21 Aug 2026
772 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Below/Par | ||
| — | — | — | 4,68,49,490.12 | ||
| — | 90.00 | — | — | ||
| Concrete for foundations and plinth in hard soil. | — | — | — | 3,86,280 | |
| — | 100.00 | — | — | ||
| Reinforcement brick work | — | — | — | 3,51,900 | |
| — | 60.00 | — | — | ||
| Plastering of brick work | — | — | — | 4,740 | |
| — | 3500.00 | — | — | ||
| Supply of 25mm PVC rigid conduit pipes of 2mm thickness as per BIS-9537 (latest) along with accessories. | — | — | — | 91,000 | |
| — | 3500.00 | — | — | ||
| Erection of 25mm PVC rigid conduit pipes of 2mm thickness along with accessories. | — | — | — | 10,500 | |
| — | 2000.00 | — | — | ||
| Supply of 32mm PVC rigid conduit pipes of 2mm thickness as per BIS-9537 (latest) along with accessories. | — | — | — | 70,000 | |
| — | 2000.00 | — | — | ||
| Erection of 32mm PVC rigid conduit pipes of 2mm thickness along with accessories. | — | — | — | 8,000 | |
| — | 2000.00 | — | — | ||
| Supply of 40mm size 'B' class GI pipe as per IS:1239 along with accessories. | — | — | — | 5,42,000 | |
| — | 2000.00 | — | — | ||
| Erection of 40mm size 'B' class GI pipe along with accessories. | — | — | — | 54,000 | |
| — | 198.00 | — | — | ||
| Supply of 50mm size 'B' class GI pipe as per IS:1239 along with accessories. | — | — | — | 57,816 | |
| — | 198.00 | — | — | ||
| Erection of 50mm size 'B' class GI pipe along with accessories. | — | — | — | 7,920 | |
| — | 500.00 | — | — | ||
| Supply of 100mm size 'B' class GI pipe as per IS:1239 along with accessories. | — | — | — | 3,43,000 | |
| — | 500.00 | — | — | ||
| Erection of 100mm size 'B' class GI pipe along with accessories. | — | — | — | 48,000 | |
| — | 4200.00 | — | — | ||
| Supply of 32mm size of HDPE pipes of Grade PE-100, PN 10 (10Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-13.6) or latest | — | — | — | 1,72,200 | |
| — | 4200.00 | — | — | ||
| Erection of 32mm size of HDPE pipes of Grade PE-100, PN 10 (10Kg/Cm2 Capacity) with accessories | — | — | — | 16,800 | |
| — | 12000.00 | — | — | ||
| Supply of 50mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-21) or latest | — | — | — | 7,80,000 | |
| — | 12000.00 | — | — | ||
| Erection of 50mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories | — | — | — | 1,08,000 | |
| — | 3000.00 | — | — | ||
| Supply of 63mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-21) or latest | — | — | — | 2,85,000 | |
| — | 3000.00 | — | — | ||
| Erection of 63mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories | — | — | — | 39,000 | |
| — | 2200.00 | — | — | ||
| Supply of 110 mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-21) or latest | — | — | — | 6,55,600 | |
| — | 2200.00 | — | — | ||
| Erection of 110 mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories | — | — | — | 90,200 | |
| — | 150.00 | — | — | ||
| Supply of 50 mm HDPE pipes of Grade PE-100, PN 16 (16Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 or latest | — | — | — | 19,500 | |
| — | 150.00 | — | — | ||
| Erection of 50 mm HDPE pipes of Grade PE-100, PN 16 (16Kg/Cm2 Capacity) with accessories | — | — | — | 2,700 | |
| — | 200.00 | — | — | ||
| Supply of 25 mm PVC casing and capping on walls along with accessories. | — | — | — | 4,000 | |
| — | 200.00 | — | — | ||
| Erection of 25 mm PVC casing and capping on walls along with accessories. | — | — | — | 600 | |
| — | 100.00 | — | — | ||
| Supply of 32 mm PVC casing and capping on walls along with accessories. | — | — | — | 2,500 | |
| — | 100.00 | — | — | ||
| Erection of 32 mm PVC casing and capping on walls along with accessories. | — | — | — | 400 | |
| — | 3000.00 | — | — | ||
| Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe. | — | — | — | 1,17,000 | |
| — | 4.00 | — | — | ||
| Supply of 1 or 2 module GI concealed sheet metal boxes | — | — | — | 132 | |
| — | 4.00 | — | — | ||
| Erection of 1 or 2 module GI concealed sheet metal boxes | — | — | — | 16 | |
| — | 40.00 | — | — | ||
| Supply of 3 module GI concealed sheet metal boxes | — | — | — | 1,840 | |
| — | 40.00 | — | — | ||
| Erection of 3 module GI concealed sheet metal boxes | — | — | — | 240 | |
| — | 50.00 | — | — | ||
| Supply of 6 module GI concealed sheet metal boxes | — | — | — | 3,750 | |
| — | 50.00 | — | — | ||
| Erection of 6 module GI concealed sheet metal boxes | — | — | — | 500 | |
| — | 20.00 | — | — | ||
| Supply of 12 module GI concealed sheet metal boxes | — | — | — | 2,420 | |
| — | 20.00 | — | — | ||
| Erection of 12 module GI concealed sheet metal boxes | — | — | — | 320 | |
| — | 4.00 | — | — | ||
| Supply of 1 or 2 module modular plates with frame | — | — | — | 184 | |
| — | 4.00 | — | — | ||
| Erection of 1 or 2 module modular plates with frame | — | — | — | 28 | |
| — | 40.00 | — | — | ||
| Supply of 3 module modular plates with frame | — | — | — | 2,320 | |
| — | 40.00 | — | — | ||
| Erection of 3 module modular plates with frame | — | — | — | 320 | |
| — | 20.00 | — | — | ||
| Supply of 4 module modular plates with frame | — | — | — | 1,560 | |
| — | 20.00 | — | — | ||
| Erection of 4 module modular plates with frame | — | — | — | 220 | |
| — | 50.00 | — | — | ||
| Supply of 6 module modular plates with frame | — | — | — | 5,450 | |
| — | 50.00 | — | — | ||
| Erection of 6 module modular plates with frame | — | — | — | 750 | |
| — | 20.00 | — | — | ||
| Supply of 12 module modular plates with frame | — | — | — | 3,480 | |
| — | 20.00 | — | — | ||
| Erection of 12 module modular plates with frame | — | — | — | 480 | |
| — | 200.00 | — | — | ||
| Supply of 10A 1-way switch | — | — | — | 7,800 | |
| — | 200.00 | — | — | ||
| Erection of 10A 1-way switch | — | — | — | 1,000 | |
| — | 150.00 | — | — | ||
| Supply of 10A multi socket for cell phone pin or 3 pin with safety shutter | — | — | — | 13,650 | |
| — | 150.00 | — | — | ||
| Erection of 10A multi socket for cell phone pin or 3 pin with safety shutter | — | — | — | 1,800 | |
| — | 90.00 | — | — | ||
| Supply of 10 &20A twin socket heavy duty socket with safety shutter | — | — | — | 13,950 | |
| — | 90.00 | — | — | ||
| Erection of 10 &20A twin socket heavy duty socket with safety shutter | — | — | — | 1,890 | |
| — | 90.00 | — | — | ||
| Supply of 20A One way modular switch | — | — | — | 8,010 | |
| — | 90.00 | — | — | ||
| Erection of 20A One way modular switch | — | — | — | 1,080 | |
| — | 45.00 | — | — | ||
| Supply of 5 step fan step regulator 2M module | — | — | — | 13,320 | |
| — | 45.00 | — | — | ||
| Erection of 5 step fan step regulator 2M module | — | — | — | 1,845 | |
| — | 144.00 | — | — | ||
| Supply of Three terminal Ceiling rose. | — | — | — | 3,168 | |
| — | 144.00 | — | — | ||
| Erection of Three terminal Ceiling rose. | — | — | — | 432 | |
| — | 2.00 | — | — | ||
| Supply of Ding dong call bell | — | — | — | 418 | |
| — | 2.00 | — | — | ||
| Fixing of Ding dong call bell | — | — | — | 42 | |
| — | 6000.00 | — | — | ||
| Supply of 3Nos.. of 1.5 Sq.mm, o f FR LS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 2,40,000 | |
| — | 6000.00 | — | — | ||
| Erection of 3Nos.. of 1.5 Sq.mm, o f FR LS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 30,000 | |
| — | 2500.00 | — | — | ||
| Supply of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 1,40,000 | |
| — | 2500.00 | — | — | ||
| Erection of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 17,500 | |
| — | 1600.00 | — | — | ||
| Supply of 2Nos.. of 4.0 Sq.mm, 1No. 2.5 sq.mm of FR LS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 1,34,400 | |
| — | 1600.00 | — | — | ||
| Erection of 2Nos.. of 4.0 Sq.mm, 1No. 2.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 17,600 | |
| — | 900.00 | — | — | ||
| Supply of 4No.s of 4.0 sq. mm, 1No. 2.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 1,34,100 | |
| — | 900.00 | — | — | ||
| Erection of 4No.s of 4.0 sq. mm, 1No. 2.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 18,000 | |
| — | 300.00 | — | — | ||
| Supply of 4No.s of 10 sq. mm, 1No. 6 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 1,10,100 | |
| — | 300.00 | — | — | ||
| Erection of 4No.s of 10 sq. mm, 1No. 6 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 15,300 | |
| — | 50.00 | — | — | ||
| Supply of Single Core 25 Sq.mm Copper Wire | — | — | — | 17,500 | |
| — | 50.00 | — | — | ||
| Erection Single Core 25 Sq.mm Copper Wire | — | — | — | 1,750 | |
| — | 100.00 | — | — | ||
| Supply of Single Core 50 Sq.mm Copper Wire | — | — | — | 61,200 | |
| — | 100.00 | — | — | ||
| Erection Single Core 50 Sq.mm Copper Wire | — | — | — | 6,100 | |
| — | 210.00 | — | — | ||
| Supply of 1.5 sq.mm PVC insulated 3 core Flexible wires as per IS 694 or latest, alongwith end terminations | — | — | — | 11,970 | |
| — | 210.00 | — | — | ||
| Erection of 1.5 sq.mm PVC insulated 3 core Flexible wires alongwith end terminations | — | — | — | 1,260 | |
| — | 150.00 | — | — | ||
| Supply of 4 sq.mm PVC insulated 3 core Flexible wires as per IS 694 or latest, alongwith end terminations | — | — | — | 24,900 | |
| — | 150.00 | — | — | ||
| Erection of 4 sq.mm PVC insulated 3 core Flexible wires alongwith end terminations | — | — | — | 2,400 | |
| — | 300.00 | — | — | ||
| Supply of 4 Sq.mm 4 core PVC insulated Flexible wires as per IS 694 or latest, alongwith end terminations | — | — | — | 63,600 | |
| — | 300.00 | — | — | ||
| Erection of 4 Sq.mm 4 core PVC insulated Flexible wires alongwith end terminations | — | — | — | 6,300 | |
| — | 300.00 | — | — | ||
| Supply of 6 Sq.mm 5 core PVC insulated Flexible wires as per IS 694 or latest, alongwith end terminations | — | — | — | 1,28,700 | |
| — | 300.00 | — | — | ||
| Erection of 6 Sq.mm 5 core PVC insulated Flexible wires alongwith end terminations | — | — | — | 12,900 | |
| — | 300.00 | — | — | ||
| Supply of 3 Core 95 Sqmm , 11000 V, HT XLPE, Aluminium armoured cable as perr BIS specification No.IS 7098. Part-II (latest) | — | — | — | 2,00,100 | |
| — | 300.00 | — | — | ||
| Erection of 3 Core 95 Sqmm , 11000 V, HT XLPE, Aluminium armoured cable | — | — | — | 27,900 | |
| — | 1400.00 | — | — | ||
| Supply of Two core 150 sq.mm armoured XLPE Aluminum cables to IS 7098 PART I (latest) complete with end terminations | — | — | — | 5,61,400 | |
| — | 1400.00 | — | — | ||
| Laying of Two core 150 sq.mm armoured XLPE Aluminum cables complete with end terminations | — | — | — | 54,600 | |
| — | 6100.00 | — | — | ||
| Supply of 6 Sqmm size 4 core LTUG XLPE aluminium armoured cable as per IS 7098 Part I, alongwith end terminations | — | — | — | 4,88,000 | |
| — | 6100.00 | — | — | ||
| Erection of 6 Sqmm size 4 core LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 67,100 | |
| — | 6500.00 | — | — | ||
| Supply of 4 core 16 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 7,21,500 | |
| — | 6500.00 | — | — | ||
| Erection of 4 core 16 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 97,500 | |
| — | 3100.00 | — | — | ||
| Supply of 4 core 25 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 4,83,600 | |
| — | 3100.00 | — | — | ||
| Erection of 4 core 25 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 65,100 | |
| — | 2000.00 | — | — | ||
| Supply of 4 core 50 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 4,96,000 | |
| — | 2000.00 | — | — | ||
| Erection of 4 core 50 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 70,000 | |
| — | 2190.00 | — | — | ||
| Supply of 4 core 70 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 7,59,930 | |
| — | 2190.00 | — | — | ||
| Erection of 4 core 70 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 1,05,120 | |
| — | 2030.00 | — | — | ||
| Supply of 4 core 95 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 8,95,230 | |
| — | 2030.00 | — | — | ||
| Erection of 4 core 95 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 1,23,830 | |
| — | 300.00 | — | — | ||
| Supply of 4 core 150 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 1,99,500 | |
| — | 300.00 | — | — | ||
| Erection of 4 core 150 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 27,900 | |
| — | 1400.00 | — | — | ||
| Supply of 4 core 240 Sqmm size LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations | — | — | — | 14,42,000 | |
| — | 1400.00 | — | — | ||
| Erection of 4 core 240 Sqmm size LTUG XLPE aluminium armoured cable alongwith end terminations | — | — | — | 2,01,600 | |
| — | 25020.00 | — | — | ||
| Supply of 8SWG GI wire | — | — | — | 2,25,180 | |
| — | 25020.00 | — | — | ||
| Erection of 8SWG GI wire | — | — | — | 25,020 | |
| — | 300.00 | — | — | ||
| Supply of 4SWG GI wire | — | — | — | 3,300 | |
| — | 300.00 | — | — | ||
| Erection of 4SWG GI wire | — | — | — | 600 | |
| — | 250.00 | — | — | ||
| Supply of 3 core 4.0 sq.mm flat copper cable suitable for submiersible pump | — | — | — | 21,000 | |
| — | 250.00 | — | — | ||
| Erection of 3 core 4.0 sq.mm flat copper cable suitable for submiersible pump | — | — | — | 2,750 | |
| — | 500.00 | — | — | ||
| Supply of cable termination lug & Glands as per the site requirement | — | — | — | 45,500 | |
| — | 500.00 | — | — | ||
| Fixing of cable termination lug & Glands as per the site requirement | — | — | — | 4,500 | |
| — | 5.00 | — | — | ||
| Supply of modular exhaust fan of 300/380 mm sweep | — | — | — | 6,480 | |
| — | 5.00 | — | — | ||
| Erection of modular exhaust fan of 300/380 mm sweep | — | — | — | 1,295 | |
| — | 12.00 | — | — | ||
| Supply of Heavy duty exhaust fan generally confirming to IS 2312 (latest) and shall meet the following requirement: (a) diameter of the fan - 300 mm (12 inches), (b) speed - 900 RPM, (c) Input power - 55 watts, (d)operating voltage - 230 V AC, 50 Hz, 1 phase, (e) Air delivery - 1250 cmh. | — | — | — | 31,789.2 | |
| — | 12.00 | — | — | ||
| Erection of Heavy duty exhaust fan generally confirming to IS 2312 (latest) and shall meet the following requirement: (a) diameter of the fan - 300 mm (12 inches), (b) speed - 900 RPM, (c) Input power - 55 watts, (d)operating voltage - 230 V AC, 50 Hz, 1 phase, (e) Air delivery - 1250 cmh. | — | — | — | 3,178.92 | |
| — | 47.00 | — | — | ||
| Supply of energy efficient 230V, 50Hz a.c 1400mm sweep, 32W BLDC motor Energy Saving Ceiling Fan with Remote Control. | — | — | — | 2,09,761 | |
| — | 47.00 | — | — | ||
| Fixing, testing and commissioning of energy efficient 230V, 50Hz a.c 1400mm sweep, 32W BLDC motor Energy Saving Ceiling Fan with Remote Control. | — | — | — | 20,962 | |
| — | 2.00 | — | — | ||
| Supply of High volume low speed ( HVLS) fan , fan dia - 12 feet, Max. Airflow- 200000 CFM, Blades - 05 Nos , Extruded Aluminium 6063T, Motor type - PMSM, 560 Watt, Sutable for single phase AC supply as per RDSO specification No. IS/RDSO-PSE/1002:2023 or latest | — | — | — | 3,48,000 | |
| — | 2.00 | — | — | ||
| Installation, testing, commissioning & transportation of High volume low speed ( HVLS) fan , fan dia - 12 feet, Max. Airflow- 200000 CFM, Blades - 05 Nos , Extruded Aluminium 6063T, Motor type - PMSM, 560 Watt, Sutable for single phase AC supply as per RDSO specification No. IS/RDSO-PSE/1002:2023 or latest | — | — | — | 40,000 | |
| — | 24.00 | — | — | ||
| Supply of 750 mm (30") sweep wall mounting air circulator with all connected accessories. | — | — | — | 1,53,264 | |
| — | 24.00 | — | — | ||
| Fixing and connecting of 750 mm (30") sweep wall mounting air circulator with all connected accessories. | — | — | — | 19,776 | |
| — | 1.00 | — | — | ||
| Supply of 5.5 feet Industrial PMSM floor fan along with all connected accessories. Max. Air Flow - 56000 CMH, Blades - 06 Nos, Speed - 300 RPM, Blade Material - 6061 T6 Fiber Blade, Input power - 400 V AC, 50HZ, Protection Rating: IP66, Noise Level <55 db, Motor Type : PMSM Brushless Motor etc. as per specification | — | — | — | 70,000 | |
| — | 1.00 | — | — | ||
| Transportation, installation, testing & commissioning of 5.5 feet Industrial PMSM floor fan along with all connected accessories. Max. Air Flow - 56000 CMH, Blades - 06 Nos, Speed - 300 RPM, Blade Material - 6061 T6 Fiber Blade, Input power - 400 V AC, 50HZ, Protection Rating: IP66, Noise Level <55 db, Motor Type : PMSM Brushless Motor etc. as per specification | — | — | — | 7,000 | |
| — | 6.00 | — | — | ||
| Supply of 70 Litres Air cooler (desert type) | — | — | — | 81,804 | |
| — | 1.00 | — | — | ||
| Supply of sheet steel enclosure made out of 16 SWG MS sheet powder coated with hylam sheet, locking arrangements consisting of l x 32 A DP MCB powder coated paint and other connected accessories etc." | — | — | — | 800 | |
| — | 1.00 | — | — | ||
| Erection of sheet steel enclosure made out of 16 SWG MS sheet powder coated with hylam sheet, locking arrangements consisting of l x 32 A DP MCB powder coated paint and other connected accessories etc." | — | — | — | 50 | |
| — | 128.00 | — | — | ||
| Supply of 6/10/16/20/25/32A, C-curve SP MCBs with 10KA breaking capacity | — | — | — | 15,616 | |
| — | 128.00 | — | — | ||
| Erection of 6/10/16/20/25/32A, C-curve SP MCBs with 10KA breaking capacity | — | — | — | 2,176 | |
| — | 4.00 | — | — | ||
| Supply of 6/10/16/20/25/32A, C-curve DP MCBs with 10KA breaking capacity | — | — | — | 1,588 | |
| — | 4.00 | — | — | ||
| Erection of 6/10/16/20/25/32A, C-curve DP MCBs with 10KA breaking capacity | — | — | — | 220 | |
| — | 8.00 | — | — | ||
| Supply of 6/10/16/20/25/32A, C-curve TP MCBs with 10KA breaking capacity | — | — | — | 6,488 | |
| — | 8.00 | — | — | ||
| Erection of 6/10/16/20/25/32A, C-curve TP MCBs with 10KA breaking capacity | — | — | — | 904 | |
| — | 10.00 | — | — | ||
| Supply of 6/10/16/20/25/32A, C-curve FP MCBs with 10KA breaking capacity | — | — | — | 8,640 | |
| — | 10.00 | — | — | ||
| Erection of 6/10/16/20/25/32A, C-curve FP MCBs with 10KA breaking capacity | — | — | — | 1,210 | |
| — | 20.00 | — | — | ||
| Supply of 50/63A, C-curve DP MCB with 10KA breaking capacity | — | — | — | 13,200 | |
| — | 20.00 | — | — | ||
| Erection of 50/63A, C-curve DP MCB with 10KA breaking capacity | — | — | — | 1,840 | |
| — | 30.00 | — | — | ||
| Supply of 50/63A, C-curve FP MCB with 10KA breaking capacity | — | — | — | 37,650 | |
| — | 30.00 | — | — | ||
| Erection of 50/63A, C-curve FP MCB with 10KA breaking capacity | — | — | — | 5,250 | |
| — | 2.00 | — | — | ||
| Supply of SPN 8 way Double door DB. | — | — | — | 1,600 | |
| — | 2.00 | — | — | ||
| Erection of SPN 8 way Double door DB. | — | — | — | 224 | |
| — | 4.00 | — | — | ||
| Supply of SPN 12 way Double door DB. | — | — | — | 6,060 | |
| — | 4.00 | — | — | ||
| Erection of SPN 12 way Double door DB. | — | — | — | 848 | |
| — | 6.00 | — | — | ||
| Supply of SPN 16 way Double door DB. | — | — | — | 11,244 | |
| — | 6.00 | — | — | ||
| Erection of SPN 16 way Double door DB. | — | — | — | 1,572 | |
| — | 1.00 | — | — | ||
| Supply of 12 way vertical Double door TPN distribution board with MCCB as incomer | — | — | — | 5,876 | |
| — | 1.00 | — | — | ||
| Erection of 12 way vertical Double door TPN distribution board with MCCB as incomer | — | — | — | 822 | |
| — | 600.00 | — | — | ||
| Horizontal drilling of bores for LT cables | — | — | — | 7,61,400 | |
| — | 6000.00 | — | — | ||
| Excavation of cable trench in all kinds of Soil | — | — | — | 7,80,000 | |
| — | 600.00 | — | — | ||
| Excavation of cable trench in Tar road surface as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 1,29,600 | |
| — | 600.00 | — | — | ||
| Excavation of cable trench incement concrete bed flooring as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 2,43,000 | |
| — | 300.00 | — | — | ||
| Excavation of cable trench across the track | — | — | — | 79,500 | |
| — | 1000.00 | — | — | ||
| Supply of flexible cable organisor of 3/4" size | — | — | — | 25,000 | |
| — | 1000.00 | — | — | ||
| Erection of flexible cable organisor of 3/4" size | — | — | — | 5,000 | |
| — | 82.00 | — | — | ||
| Supply of earth pit materials and construction of earth pit as per IS 3043:1987 specification. This item also includesof supply anderection of CI pipe of size of 100mm inner diameter,13mm thickness and 3000 mm length.This work also includes of fabrication and fixing of GI strips for earthing connection. Excavated earth pit should be filled by mixture of coke/charcoal, salt and sand upto top. Provision of brick masonry chamber of size 650 mm x 650 mm and depth upto1000mm including light type CI coverframe and applying 12mm thick cement plaster in 1:3 inside and to all the exposed faces up to 300mm below. Foundation level, curing etc., All required materials for this job such as CI pipe cover with frame, salt,cement sand, charcoal gravel, bricks, etc.required bolts, nuts and double washers, number plates or painted plates. Tentative quantity of salt and charcoal shall be of 2.5 CMt. The CI pipe should be painted with 2coats of bitumen paint as per the directions of Rly engineer at site. Note: The work should be strictly done as per IS 3043:1987 specification or latest. | — | — | — | 7,13,400 | |
| — | 6.00 | — | — | ||
| Supply and erection of earth electrodes i.e., copper bonded high tensile low carbon steel electrode of with minimum 3mtrs. Long, 17 mm dia with copper coating thickness of min 250 microns and current carrying capacity of min 15 KA for 1 sec for maintenance free earthing as per RDSO specification No.No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt-1) latest | — | — | — | 24,750 | |
| — | 300.00 | — | — | ||
| Supply and filling of Earth enhancing materials for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/ 0109 (Rev.0)-2008 (Amdt-1) latest. | — | — | — | 78,000 | |
| — | 3.00 | — | — | ||
| Supply and fixing of copper bus bar 50x 6mm for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109 (Rev.0)-2008 (Amdt-1) latest. | — | — | — | 12,000 | |
| — | 3.00 | — | — | ||
| Supply and fixing of 25x3 mm EC grade copper strip for connecting earth terminal to the bus bar in equipment roomfor maintenance free earthing as per RDSO spec no. RDSO/PE/SPEC/PS/0109 (Rev.0)-2008 (Amdt-1) or latest | — | — | — | 4,794 | |
| — | 6.00 | — | — | ||
| Earth chamber with LID 100x250x250 mm for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt-1) latest. | — | — | — | 4,200 | |
| — | 200.00 | — | — | ||
| Supply & laying of 35mm cable from pit to main equipment bus bar including bolts, nuts & HDPE pipes for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt-1) latest. | — | — | — | 48,000 | |
| — | 12.00 | — | — | ||
| Supply & providing of exothermic weld connection for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109 (Rev.0)-2008 (Amdt-1) latest. | — | — | — | 7,488 | |
| — | 25.00 | — | — | ||
| Supply of 7mtr. hot dip galvanised single arm Conical/Octogonal pole as per site requirement with foundation bolts, base plate, MCB & bracket. | — | — | — | 3,37,325 | |
| — | 25.00 | — | — | ||
| Erection of 7mtr. hot dip galvanised single arm Conical/Octogonal pole as per site requirement with foundation bolts, base plate, MCB & bracket. | — | — | — | 44,550 | |
| — | 108.00 | — | — | ||
| Supply of 05 mtrs long dip galvanised octogonal pole with 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 200 x 200x12mm, M16x600 long 'J' type EN 8 grade foundation bolts., 1000 mm long single/double arm bracket (as per site requirement) with concrete foundation and plinth in hard soil including excation of soil, tamping of concrete grouting with Bakelite sheet and MCB(for mounting inside the base compartment of pole) with all accessories. | — | — | — | 11,32,272 | |
| — | 108.00 | — | — | ||
| Erection of 05 mtrs long dip galvanised octogonal pole with 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 200 x 200x12mm, M16x600 long 'J' type EN 8 grade foundation bolts., 1000 mm long single/double arm bracket (as per site requirement) with concrete foundation and plinth in hard soil including excation of soil, tamping of concrete grouting with Bakelite sheet and MCB(for mounting inside the base compartment of pole) with all accessories. | — | — | — | 1,49,580 | |
| — | 3.00 | — | — | ||
| Supply of Digital multi function panel meter complete with CTs with RS485 port | — | — | — | 18,726 | |
| — | 3.00 | — | — | ||
| Erection of Digital multi function panel meter complete with CTs with RS485 port | — | — | — | 2,304 | |
| — | 2.00 | — | — | ||
| Supply of GI junction box of size 15"x10"x8" with hylam sheet | — | — | — | 2,600 | |
| — | 2.00 | — | — | ||
| Erection of GI junction box of size 15"x10"x8" with hylam sheet | — | — | — | 400 | |
| — | 210.00 | — | — | ||
| Supply of Junction box (Hensel type with 4 way terminals) Cable Size 4 to 10 sqmm | — | — | — | 2,86,755 | |
| — | 210.00 | — | — | ||
| Erection of Junction box (Hensel type with 4 way terminals) Cable Size 4 to 10 sqmm | — | — | — | 28,665 | |
| — | 105.00 | — | — | ||
| Supply of Thermoplastic junction Box complete with Accessories of size 168 X 253 X 115 mm | — | — | — | 1,71,725.4 | |
| — | 105.00 | — | — | ||
| Erection of Thermoplastic junction Box complete with Accessories of size 168 X 253 X 115 mm | — | — | — | 17,172.75 | |
| — | 20.00 | — | — | ||
| Supply of Thermoplastic junction Box complete with Accessories of size 300x300x182 | — | — | — | 1,08,182.4 | |
| — | 20.00 | — | — | ||
| Erection of Thermoplastic junction Box complete with Accessories of size 300x300x182 | — | — | — | 10,818.2 | |
| — | 10.00 | — | — | ||
| Supply of Diecast plastic moulded light weight track lead junction box with terminals arrangement etc | — | — | — | 12,270 | |
| — | 10.00 | — | — | ||
| Erection of Diecast plastic moulded light weight track lead junction box with terminals arrangement etc | — | — | — | 500 | |
| — | 200.00 | — | — | ||
| Fabrication and Supply of DC terminal box (Hinged Type) suitable for connecting HOFR welding copper cable with sheet steel enclosure made up of not less than 16 SWG complete with 12mm thick Hylam sheet to fix the terminals with heavy duty terminal studs, bolts, nuts, etc. complete. | — | — | — | 1,20,000 | |
| — | 200.00 | — | — | ||
| Fixing and connecting of DC terminal box (Hinged Type) suitable for connecting HOFR welding copper cable with sheet steel enclosure made up of not less than 16 SWG complete with 12mm thick Hylam sheet to fix the terminals with heavy duty terminal studs, bolts, nuts, etc. complete. | — | — | — | 18,000 | |
| — | 1200.00 | — | — | ||
| Supply of GI flat of size 25mmx3mm | — | — | — | 57,600 | |
| — | 1200.00 | — | — | ||
| Erection of GI flat of size 25mmx3mm | — | — | — | 7,200 | |
| — | 1000.00 | — | — | ||
| Supply of GI channel of size 150mm x 75 mm | — | — | — | 49,000 | |
| — | 1000.00 | — | — | ||
| Erection of GI channel of size 150mm x 75 mm | — | — | — | 7,000 | |
| — | 1.00 | — | — | ||
| Supply of SMC Meter Box | — | — | — | 609 | |
| — | 1.00 | — | — | ||
| Erection of SMC Meter Box | — | — | — | 81 | |
| — | 20.00 | — | — | ||
| Design, fabrication & supply of sheet steel cubical made of 16SWG GI sheet powder coated complete with clmapping arrangement. The cubicle shall house 63A to 250A MCCB complete with aluminium busbar connecting arrangement etc. | — | — | — | 20,000 | |
| — | 20.00 | — | — | ||
| Erection,Testing & Commissioning of sheet steel cubical made of 16SWG GI sheet powder coated complete with clmapping arrangement. The cubicle shall house 63A to 250A MCCB complete with aluminium busbar connecting arrangement etc. | — | — | — | 4,000 | |
| — | 3200.00 | — | — | ||
| Supply of GI flat of size 50x6 mm with all accessories such as bolts and nuts etc. complete for earthing. | — | — | — | 1,79,200 | |
| — | 3200.00 | — | — | ||
| Laying and connecting of GI flat of size 50x6 mm with all accessories such as bolts and nuts etc. complete for earthing. | — | — | — | 32,000 | |
| — | 410.00 | — | — | ||
| Supply of MS 'I' beam of size 150x75 mm 2 m long with supply of cement, sand, ballast etc. including excavation of pit duly breaking the hard concrete (if required) and necessary accessories. The post shall be painted with two coat of red oxide and two coats of aluminum paint and black paint as desired by site engineer | — | — | — | 7,72,923.8 | |
| — | 410.00 | — | — | ||
| Erection of MS 'I' beam of size 150x75 mm 2 m long with supply of cement, sand, ballast etc. including excavation of pit duly breaking the hard concrete (if required) and necessary accessories. The post shall be painted with two coat of red oxide and two coats of aluminum paint and black paint as desired by site engineer | — | — | — | 5,87,530 | |
| — | 5800.00 | — | — | ||
| Supply of copper conductor 95 sq.mm size, Heat Oil & flame Retardant (HOFR) welding cable conforming to IS: 9857/90 or latest | — | — | — | 55,10,000 | |
| — | 5800.00 | — | — | ||
| Laying of copper conductor 95 sq.mm size, Heat Oil & flame Retardant (HOFR) welding cable conforming to IS: 9857/90 or latest | — | — | — | 92,800 | |
| — | 1.00 | — | — | ||
| Design, fabrication & supply of outdoor LT panel board ( powder coated RAL 7032 ) with suitable Busbar capcity, Digital MFM, digital voltmeter, digital ammeter with CTS, Earth fault relay with CBCT, indication lamps etc, for housing of following switch gear 800A 4P ACB for I/C-02 No's, 1x1250 A 4Pole COS, 3x630A 4Pole MCCBs, 3x400A 4Pole MCCBs , 6x200A 4Pole MCCBs,4x100A 4 pole MCCBs and 4x32A 4 pole MCCBs , with one spare cubical complete with accessories, shunt release for incomer ACBs etc | — | — | — | 2,25,000 | |
| — | 1.00 | — | — | ||
| Erection, testing & Commissioning of outdoor LT panel board ( powder coated RAL 7032 ) with suitable Busbar capcity, Digital MFM, digital voltmeter, digital ammeter with CTS, Earth fault relay with CBCT, indication lamps etc, for housing of following switch gear 800A 4P ACB for I/C-02 No's, 1x1250 A 4Pole COS, 3x630A 4Pole MCCBs, 3x400A 4Pole MCCBs , 6x200A 4Pole MCCBs,4x100A 4 pole MCCBs and 4x32A 4 pole MCCBs , with one spare cubical complete with accessories, shunt release for incomer ACBs etc | — | — | — | 25,000 | |
| — | 2.00 | — | — | ||
| Design, fabrication & supply of indoor LT panel board ( with powder coated RAL 7032 ) with suitable Bus bar capacity , Digital MFM ,digital voltmeter, digital ammeter with CTS, Earth fault relay with CBCT, indication lamps etc, for housing of following switchgear , 400A 4P MCCB for I/C-01 No's, 1x400 A 4Pole COS , Outgoings 4x200A 4Pole MCCBs, 2x160A 4 pole MCCBs, 2x100A 4 pole MCCBs and 4x32A 4 pole MCCBs, with one spare cubical complete with accessories, shunt release for incomer MCCBS etc | — | — | — | 2,50,000 | |
| — | 2.00 | — | — | ||
| Erection, testing, Commissioning of indoor LT panel board ( with powder coated RAL 7032 ) with suitable Bus bar capacity , Digital MFM ,digital voltmeter, digital ammeter with CTS, Earth fault relay with CBCT, indication lamps etc, for housing of following switchgear , 400A 4P MCCB for I/C-01 No's, 1x400 A 4Pole COS , Outgoings 4x200A 4Pole MCCBs, 2x160A 4 pole MCCBs, 2x100A 4 pole MCCBs and 4x32A 4 pole MCCBs, with one spare cubical complete with accessories, shunt release for incomer MCCBS etc | — | — | — | 30,000 | |
| — | 3.00 | — | — | ||
| Design, fabrication & Supply of LT panel board ( powder coated RAL 7032 ) with suitable Busbar 200A , digital votmeter, digital ammeter with CTS, indication lamps etc, for housing of following switchgear , 100A 4P MCCB for I/C-01 No, Outgoings 63 A 3P MCBs-10 Nos, 1 No. of 100A COS with one spare cubical with complete accessories, etc. | — | — | — | 1,80,000 | |
| — | 3.00 | — | — | ||
| Erection, testing, Commissioning of LT panel board ( powder coated RAL 7032 ) with suitable Busbar 200A , digital votmeter, digital ammeter with CTS, indication lamps etc, for housing of following switchgear , 100A 4P MCCB for I/C- 01 No, Outgoings 63 A 3P MCBs-10 Nos, 1 No. of 100A COS with one spare cubical with complete accessories, etc. | — | — | — | 18,000 | |
| — | 2.00 | — | — | ||
| Design & Supply of Control Panel board (outdoor type) - Design, fabrication, supply, erection, connecting, testing & commissioning of Sheet Steel Enclosure outdoor type shall house 1x250A FP MCCB, 3x100 FP MCCBs, 3x63A FP MCCB, 3x32A TP MCB, 1x250A FP onload COS and Digital Multi functional panel meter etc. complete with one spare cubical with Alluminium busbars LED indication lamps etc. | — | — | — | 1,70,000 | |
| — | 2.00 | — | — | ||
| Erection, Testing and Commissioning of Control Panel board (outdoor type) - Design, fabrication, supply, erection, connecting, testing & commissioning of Sheet Steel Enclosure outdoor type shall house 1x250A FP MCCB, 3x100 FP MCCBs, 3x63A FP MCCB, 3x32A TP MCB, 1x250A FP onload COS and Digital Multi functional panel meter etc. complete with one spare cubical with Alluminium busbars LED indication lamps etc. | — | — | — | 20,000 | |
| — | 105.00 | — | — | ||
| Supply of outdoor Industrial socket box suitable for housing of 1 No. of 63A 5pin IP65 socket, 2 Nos. of 16A 3 pin IP65 socket, 2 nos. of 16A DP MCB, 1 No. of 63A FP MCB,1 No of 63A RCCB, with Aluminium busbar suitable for terminating 4Cx50 sq.mm cable and Interconnecting wiring, earthing etc. | — | — | — | 15,22,500 | |
| — | 105.00 | — | — | ||
| Erection of outdoor Industrial socket box suitable for housing of 1 No. of 63A 5pin IP65 socket, 2 Nos. of 16A 3 pin IP65 socket, 2 nos. of 16A DP MCB, 1 No. of 63A FP MCB,1 No of 63A RCCB, with Aluminium busbar suitable for terminating 4Cx50 sq.mm cable and Interconnecting wiring, earthing etc. | — | — | — | 1,05,000 | |
| — | 1.00 | — | — | ||
| Supply of 1250A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 1,66,675 | |
| — | 1.00 | — | — | ||
| Erection of 1250A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 16,667 | |
| — | 2.00 | — | — | ||
| Supply of 400A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 39,386 | |
| — | 2.00 | — | — | ||
| Erection of 400A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 5,514 | |
| — | 2.00 | — | — | ||
| Supply of 250A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 27,222 | |
| — | 2.00 | — | — | ||
| Erection of 250A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 3,810 | |
| — | 3.00 | — | — | ||
| Supply of 100A 4P On-load Change over switch in open execution. | — | — | — | 16,464 | |
| — | 3.00 | — | — | ||
| Erection of 100A 4P On-load Change over switch in open execution. | — | — | — | 2,304 | |
| — | 2.00 | — | — | ||
| Supply of 800A FP 50 kA Electrical draw out type ACBs with electrically interlock system for two ACBs and complete with accessories etc. LSIG Micro Processor release | — | — | — | 2,86,297 | |
| — | 2.00 | — | — | ||
| Erection of 800A FP 50 kA Electrical draw out type ACBs with electrically interlock system for two ACBs and complete with accessories etc. LSIG Micro Processor release | — | — | — | 28,629.7 | |
| — | 3.00 | — | — | ||
| Supply of 630A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release suitable for 800 V with extended ROM and spreader links (4 nos-02 sets), phase barriers | — | — | — | 1,54,884 | |
| — | 3.00 | — | — | ||
| Erection of 630A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release suitable for 800 V with extended ROM and spreader links (4 nos-02 sets), phase barriers | — | — | — | 6,000 | |
| — | 5.00 | — | — | ||
| Supply of 400A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release ,extended ROM and spereder links(4 nos-02 sets), phase barriers | — | — | — | 1,53,560 | |
| — | 5.00 | — | — | ||
| Erection of 400A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release ,extended ROM and spereder links(4 nos-02 sets), phase barriers | — | — | — | 15,356 | |
| — | 16.00 | — | — | ||
| Supply of 250A/200A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with spereder links(4 nos-02 sets), phase barriers | — | — | — | 4,31,992 | |
| — | 16.00 | — | — | ||
| Erection of 250A/200A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with spereder links(4 nos-02 sets), phase barriers | — | — | — | 43,199.2 | |
| — | 5.00 | — | — | ||
| Supply of 160A 4 pole MCCB with 25KA breaking capacity with LSIG Micro processor based release with spereder links(4 nos-02 sets), phase barriers | — | — | — | 1,24,135 | |
| — | 5.00 | — | — | ||
| Erection of 160A 4 pole MCCB with 25KA breaking capacity with LSIG Micro processor based release with spereder links(4 nos-02 sets), phase barriers | — | — | — | 12,413.5 | |
| — | 17.00 | — | — | ||
| Supply of 100A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release with extended ROM, spereder links(4 nos-02 sets), phase barriers | — | — | — | 95,650.5 | |
| — | 17.00 | — | — | ||
| Erection of 100A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release with extended ROM, spereder links(4 nos-02 sets), phase barriers | — | — | — | 9,565.05 | |
| — | 38.00 | — | — | ||
| Supply of 16/20/25/32/40/50/63A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release | — | — | — | 1,34,520 | |
| — | 38.00 | — | — | ||
| Erection of 16/20/25/32/40/50/63A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release | — | — | — | 18,810 | |
| — | 30.00 | — | — | ||
| Supply of 63 A C curve TP MCB | — | — | — | 36,684 | |
| — | 30.00 | — | — | ||
| Erection of 63 A C curve TP MCB | — | — | — | 5,135.7 | |
| — | 6.00 | — | — | ||
| Supply of 6/10/16/20/25/32A, C-curve TP MCBs with 10KA breaking capacity | — | — | — | 6,036 | |
| — | 6.00 | — | — | ||
| Erection of 6/10/16/20/25/32A, C-curve TP MCBs with 10KA breaking capacity | — | — | — | 845.04 | |
| — | 1.00 | — | — | ||
| Supply of Automatic Changeover Color Light Signaling Panel Capacity 150A For 25KVA AT as per RDSO Spec no.TI/SPC/PSI/CLS/0020 with A&C slip 1to 4 or latest. | — | — | — | 1,29,800 | |
| — | 1.00 | — | — | ||
| Erection of Automatic Changeover Color Light Signaling Panel Capacity 150A For 25KVA AT as per RDSO Spec no.TI/SPC/PSI/CLS/0020 with A&C slip 1to 4 or latest. | — | — | — | 2,000 | |
| — | 3.00 | — | — | ||
| Supply of 150A CLS junction box as per the drawing No:E.252/Tr.D/C/CLS-JB/2024-01, Dated: 16.07.2024 or latest.Drawing enclosed | — | — | — | 57,000 | |
| — | 3.00 | — | — | ||
| Erection, testing and commissioning of 150A CLS junction box as per the drawing No:E.252/Tr.D/C/CLS- JB/2024-01, Dated: 16.07.2024 or latest.Drawing enclosed | — | — | — | 3,360 | |
| — | 3.00 | — | — | ||
| Supply of Weather proof terminal box with Bimetallic bus bar with clampbolts nuts including all accessories etc. (For 25KVA AT) As per DRG No:E.252/ TrD/C/AT-JB/2024-02.Dated:16.07.2024 or latest Drawing enclosed. | — | — | — | 34,500 | |
| — | 3.00 | — | — | ||
| Fixing, connecting and commissioning of Weather proof terminal box with Bimetallic bus bar with clampbolts nuts including all accessories etc. (For 25KVA AT) As per DRG No:E.252/ TrD/C/AT-JB/2024-02.Dated:16.07.2024 or latest Drawing enclosed. | — | — | — | 1,500 | |
| — | 2.00 | — | — | ||
| Supply of 16 M (clear height) High mast with lowering & rasing motorized unit, lantern carriage assembly suitable for fixing 10 luminares and its control gear box, lighting fixial arrangement for fixing aviation light and foundation bolts on provided foundation (excluding luminares and CG boxes) as per specification. | — | — | — | 3,45,763.68 | |
| — | 2.00 | — | — | ||
| Erection, Testing and Commissioning of 16 M (clear height) High mast with lowering & rasing motorized unit, lantern carriage assembly suitable for fixing 10 luminares and its control gear box, lighting fixial arrangement for fixing aviation light and foundation bolts on provided foundation (excluding luminares and CG boxes) as per specification. | — | — | — | 48,407.56 | |
| — | 2.00 | — | — | ||
| Supply of control panel housing suitable control circuit for the operation of the mast complete with switchgears, electronic timer with contactor circuit etc . It shall also consist of suitable control for the power tool motor. | — | — | — | 66,477.26 | |
| — | 2.00 | — | — | ||
| Erection of control panel housing suitable control circuit for the operation of the mast complete with switchgears, electronic timer with contactor circuit etc . It shall also consist of suitable control for the power tool motor. | — | — | — | 7,967.84 | |
| — | 2.00 | — | — | ||
| Design and casting of suitable shallow type RCC foundation with M-15 concrete for erection of 16 mtrs High mast include supply and fixing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and template etc.. | — | — | — | 76,361.56 | |
| — | 80.00 | — | — | ||
| Provision of fencing panels for High mast structures with size 2 M height as per the directions of the engineer at site. | — | — | — | 1,18,480 | |
| — | 8.00 | — | — | ||
| Supply of 12M high mast shaft in one section suitable for 55m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 nos luminaries in symmetrical arrangement, double drum winch, 5 mm diameter SS wire rope, trailing cable, connector, intergral power tool motor, manual handle, junction box, lightening finial, wiring material, power cables between panel and mast, MCB in base compartment Cg mounting clamps and bolts. | — | — | — | 11,53,232 | |
| — | 8.00 | — | — | ||
| Erection, Testing and Commissioning of 12M high mast shaft in one section suitable for 55m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 nos luminaries in symmetrical arrangement, double drum winch, 5 mm diameter SS wire rope, trailing cable, connector, intergral power tool motor, manual handle, junction box, lightening finial, wiring material, power cables between panel and mast, MCB in base compartment Cg mounting clamps and bolts. | — | — | — | 1,61,448 | |
| — | 8.00 | — | — | ||
| Design and Casting of suitable shallow type RCC foundation with M20 concrete for erection of 12 mtrs High mast include supply and fixing of foundation bolts. | — | — | — | 2,24,568 | |
| — | 8.00 | — | — | ||
| Design, fabrication & supply of 4 way LT control panel board comprising of 4 poles MCB's industrial plug and socket complete with individual timers along with contactor for controlling the luminaire in the circuit (70% &30%) | — | — | — | 1,94,464 | |
| — | 8.00 | — | — | ||
| Erection, testing and commissioning of 4 way LT control panel board comprising of 4 poles MCB's industrial plug and socket complete with individual timers along with contactor for controlling the luminaire in the circuit (70% &30%) | — | — | — | 27,224 | |
| — | 100.00 | — | — | ||
| Supply of 300 X 100 X 1.6mm Thick M.S Powder coated Solid Bottom Tray & With in the Length of 2.5 mtrs and 2 No. coupler plates , Powder coated Hardware size : M8 x 20 mm Hexagonal Head Screw with Nut & Washer. (2 No's of Powder coated Inside clamps 25 x 2 mm size at every 1 metre) etc. as per Site conditions | — | — | — | 1,13,400 | |
| — | 100.00 | — | — | ||
| Fixing of 300 X 100 X 1.6mm Thick M.S Powder coated Solid Bottom Tray & With in the Length of 2.5 mtrs and 2 No. coupler plates , Powder coated Hardware size : M8 x 20 mm Hexagonal Head Screw with Nut & Washer. (2 No's of Powder coated Inside clamps 25 x 2 mm size at every 1 metre) etc. as per Site conditions | — | — | — | 11,400 | |
| — | 100.00 | — | — | ||
| Supply of 150 X 100 X 1.6mm Thick M.S Powder coated Solid Bottom Tray & With in the Length of 2.5 mtrs and 2 No. coupler plates , Powder coated Hardware size : M8 x 20 mm Hexagonal Head Screw with Nut & Washer. (2 No's of Powder coated Inside clamps 25 x 2 mm size at every 1 metre) etc. as per Site conditions | — | — | — | 78,800 | |
| — | 100.00 | — | — | ||
| Fixing of 150 X 100 X 1.6mm Thick M.S Powder coated Solid Bottom Tray & With in the Length of 2.5 mtrs and 2 No. coupler plates , Powder coated Hardware size : M8 x 20 mm Hexagonal Head Screw with Nut & Washer. (2 No's of Powder coated Inside clamps 25 x 2 mm size at every 1 metre) etc. as per Site conditions | — | — | — | 7,880 | |
| — | 100.00 | — | — | ||
| Supply of 50 X 50 X 1.6mm Thick M.S Powder coated Solid Bottom Tray With in the Length of 2.5 mtrs and 2 No. coupler plates , Powder coated Hardware size : M8 x 20 mm Hexagonal Head Screw with Nut & Washer etc. as per Site conditions | — | — | — | 28,600 | |
| — | 100.00 | — | — | ||
| Fixing of 50 X 50 X 1.6mm Thick M.S Powder coated Solid Bottom Tray With in the Length of 2.5 mtrs and 2 No. coupler plates , Powder coated Hardware size : M8 x 20 mm Hexagonal Head Screw with Nut & Washer etc. as per Site conditions | — | — | — | 2,860 | |
| — | 300.00 | — | — | ||
| Supply of Supports made of MS flat/angles for monitoring of cable trays duly carring out welding/fixing of fastners to existing Metal/Non-Metal structure | — | — | — | 1,20,000 | |
| — | 300.00 | — | — | ||
| Fixing of Supports made of MS flat/angles for monitoring of cable trays duly carring out welding/fixing of fastners to existing Metal/Non-Metal structure | — | — | — | 12,000 | |
| — | 6.00 | — | — | ||
| Supply of 10 W LED Indoor type tube light fitting as per Railways specification | — | — | — | 1,620 | |
| — | 6.00 | — | — | ||
| Erection of 10 W LED Indoor type tube light fitting as per Railways specification | — | — | — | 180 | |
| — | 120.00 | — | — | ||
| Supply of 20W LED batten fitting complete set with fixing arrangement as per Railways specification | — | — | — | 44,280 | |
| — | 120.00 | — | — | ||
| Erection of 20W LED batten fitting complete set with fixing arrangement as per Railways specification | — | — | — | 5,160 | |
| — | 40.00 | — | — | ||
| Supply of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification | — | — | — | 23,000 | |
| — | 40.00 | — | — | ||
| Erection, connecting, testing and commissioning of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification | — | — | — | 3,240 | |
| — | 235.00 | — | — | ||
| Supply of 60W LST LED street light complete with necessary clamps and hardware etc. as per Railways specification | — | — | — | 6,36,850 | |
| — | 235.00 | — | — | ||
| Erection, connecting, testing and commissioning of 60W LST LED street light complete with necessary clamps and hardware etc. as per Railways specification | — | — | — | 23,500 | |
| — | 26.00 | — | — | ||
| Supply of 100W LST LED flood light fixture complete with necessary mounting accessories,clamps and hardware etc as per Railway specification | — | — | — | 1,00,594 | |
| — | 26.00 | — | — | ||
| Erection, connecting,testing and commissioning of 100W LST LED flood light fixture complete with necessary mounting accessories,clamps and hardware etc as per Railway specification | — | — | — | 2,236 | |
| — | 26.00 | — | — | ||
| Supply of LED highbay symmetric beam luminaire with housing made of die-cast aluminium of system wattage consisting 70W. The luminaire shall be with dedicated optics to provide precise light distribution of symmetric narrow beam angle (60 deg beam). The luminaire shall be designed to meet its specifications on performance & lifetime at a design ambient temperature of 45 deg C and operating temperature range 0-50° C. A specially designed heat management system to ensure luminous efficacy >=145 lm/ W for the system and ensure lumen depreciation upto 30% over 50k burning hours. The luminaire is designed to meet IP 65 and IK 08 classification and is compliant with relevant immunity, safety and performance and EMI standards. The system lumens shall not be less than 10000 lumens with 5700K CCT. The CRI shall be > 70. The luminaire shall be able operate from 120 - 270V AC, 50Hz with > 0.95 PF & THD <=10%. The LEDs shall be of SMD type (not COB type). The luminaire supplier shall submt the LM79 and LM80 report of the luminaire from the approved NABL accredited laboratory. The lumianire shall be with toughened glass cover. The luminaire shall be with inbuilt surge protection of 4kV. The driver efficiency shall be > 90%. The driver shall be able to withstand 440V (Phase to Phase Protection for 8 Hrs and High cut @ 325±15V and auto Restart.. Similar to Signify Cat reference No. BY515P LED100S 5700 NB PSU GR or Equivalent | — | — | — | 2,21,000 | |
| — | 26.00 | — | — | ||
| Installation, testing & commissioning of LED highbay symmetric beam luminaire with housing made of die-cast aluminium of system wattage consisting 70W. The luminaire shall be with dedicated optics to provide precise light distribution of symmetric narrow beam angle (60 deg beam). The luminaire shall be designed to meet its specifications on performance & lifetime at a design ambient temperature of 45 deg C and operating temperature range 0-50° C. A specially designed heat management system to ensure luminous efficacy >=145 lm/ W for the system and ensure lumen depreciation upto 30% over 50k burning hours. The luminaire is designed to meet IP 65 and IK 08 classification and is compliant with relevant immunity, safety and performance and EMI standards. The system lumens shall not be less than 10000 lumens with 5700K CCT. The CRI shall be > 70. The luminaire shall be able operate from 120 - 270V AC, 50Hz with > 0.95 PF & THD <=10%. The LEDs shall be of SMD type (not COB type). The luminaire supplier shall submt the LM79 and LM80 report of the luminaire from the approved NABL accredited laboratory. The lumianire shall be with toughened glass cover. The luminaire shall be with inbuilt surge protection of 4kV. The driver efficiency shall be > 90%. The driver shall be able to withstand 440V (Phase to Phase Protection for 8 Hrs and High cut @ 325±15V and auto Restart.. Similar to Signify Cat reference No. BY515P LED100S 5700 NB PSU GR or Equivalent | — | — | — | 22,100 | |
| — | 70.00 | — | — | ||
| Supply of 200 W LED Flood light luminaire as per Railways specification | — | — | — | 5,41,083.9 | |
| — | 70.00 | — | — | ||
| Erection, connecting, testing and commissioning of of 200 W LED Flood light luminaire as per Railways specification | — | — | — | 5,465.6 | |
| — | 20.00 | — | — | ||
| Supply of recessed LED Downlighters 15W complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification | — | — | — | 10,300 | |
| — | 20.00 | — | — | ||
| Erection, connecting, testing and commissioning of recessed LED Downlighters 15W complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification | — | — | — | 860 | |
| — | 10.00 | — | — | ||
| Supply of recessed mounted 2'x2' 43W LED luminaire complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification | — | — | — | 25,890 | |
| — | 10.00 | — | — | ||
| Erection, connecting, testing and commissioning of recessed mounted 2'x2' 43W LED luminaire complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification ' | — | — | — | 500 | |
| — | 40.00 | — | — | ||
| Supply of LED indoor surface downlighter suitable for general lighting. Luminaire should have pressure die- cast Al housing with diffused optics. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20, IK02 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 2150 lumens and maximum system wattage of 18 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 30k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. The fixture housing should be available in colors aluminium and grey. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval. Similar to Signify cat ref. no. Sleek Surface Pro SM296C LED20S-6500 PSU WH | — | — | — | 70,800 | |
| — | 40.00 | — | — | ||
| Installation, testing and commissioning of LED indoor surface downlighter suitable for general lighting. Luminaire should have pressure die-cast Al housing with diffused optics. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20, IK02 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 2150 lumens and maximum system wattage of 18 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 30k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. The fixture housing should be available in colors aluminium and grey. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval. | — | — | — | 7,080 | |
| — | 2.00 | — | — | ||
| Supply of LED Outdoor surface downlighter suitable for general lighting. Luminaire should have polycarbonateplus Al housing. The luminaire should have CRI > 80 and CCT of 6500K/4000K. The luminaire shall be compliant with IP65.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 3800 lumens and maximum system wattage of 38 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to (L70B50) over 50k burning hours @ design ambient temp 25 deg C. The electronic driver used shall have a power factor >0.90 , THD <10%. The fixture housing should be available in white and can be cutomized in black. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval. Similar to Signify Cat reference No. GreenSpace Surface SM294C LED40/840 PSU WP WH GM | — | — | — | 20,100 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of LED Outdoor surface downlighter suitable for general lighting. Luminaire should have polycarbonateplus Al housing. The luminaire should have CRI > 80 and CCT of 6500K/4000K. The luminaire shall be compliant with IP65.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 3800 lumens and maximum system wattage of 38 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to (L70B50) over 50k burning hours @ design ambient temp 25 deg C. The electronic driver used shall have a power factor >0.90 , THD <10%. The fixture housing should be available in white and can be cutomized in black. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval. Similar to Signify Cat reference No. GreenSpace Surface SM294C LED40/840 PSU WP WH GM | — | — | — | 1,150 | |
| — | 280.00 | — | — | ||
| Supply of 30 W AC LED Flood light luminaries with glass IP 65 including all connected accessories etc. as per railway Specification | — | — | — | 8,40,000 | |
| — | 280.00 | — | — | ||
| Fixing, testing and commissioning of 30 W AC LED Flood light luminaries with glass IP 65 including all connected accessories etc. as per railway Specification | — | — | — | 24,640 | |
| — | 2.00 | — | — | ||
| Supply of 45 W LED Light conforming to IS 10322 part 5 section 3, made of Die cast aluminium graphite grey powder coated spigot Acrylic clear diffuser opal acrylic diffuser provided at LED area to minimize glare spun aluminium powder coated canopy low power warm white (ww) LEDs connected in series and parallel combination with better heat dissipation arrangement LED colour temperature :3000K + 300K,Highly efficient constant current electronic driver having operating voltage range from 140-280 Volt AC, provided with high Voltage, open and short circuit protection, Luminary is wired inbuilt driver with 5kV surge protection Suitable for 60mm OD pipe entry with fixing bolts, Ingress Protection IP 65 or higher. (Similar to Make: Bajaj Model: DSLPT BL 2465 45W, Cat Ref: BGCTN 45W LED WW, Product Type: LED POST TOP LIGHT) | — | — | — | 11,564 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of 45 W LED Light conforming to IS 10322 part 5 section 3, made of Die cast aluminium graphite grey powder coated spigot Acrylic clear diffuser opal acrylic diffuser provided at LED area to minimize glare spun aluminium powder coated canopy low power warm white (ww) LEDs connected inseries and parallel combination with better heat dissipation arrangement LED colour temperature :3000K + 300K,Highly efficient constant current electronic driver having operating voltage range from 140-280Volt AC, provided with high Voltage, open and short circuit protection, Luminary is wired inbuilt driver with 5kV surge protection Suitable for 60mm OD pipe entry with fixing bolts, Ingress Protection IP 65 or higher. | — | — | — | 1,156 | |
| — | 10.00 | — | — | ||
| Supply of 16W 3 directional LED Pit Light fitting with IP67 Protection (10W+4W+2W) aluminium diecast with IP67 Protection as per specification. Note Prior Approval to be taken including all accessories. | — | — | — | 17,640 | |
| — | 10.00 | — | — | ||
| Erection of 16W 3 directional LED Pit Light fitting with IP67 Protection(10W+4W+2W) aluminium diecast with IP67 Protection as per specification. . | — | — | — | 1,000 | |
| — | 1.00 | — | — | ||
| Supply of 5 star inverter type 1.5 TR capacity split type Air conditioner unit complete | — | — | — | 42,000 | |
| — | 1.00 | — | — | ||
| Installation, testing and commissioning of 5 star inverter type 1.5 TR capacity split type Air conditioner unit complete | — | — | — | 1,500 | |
| — | 10.00 | — | — | ||
| Supply of copper pipe 1/4" x 1/2" of 20 SWG along with 9 mm thick insulation | — | — | — | 10,030 | |
| — | 10.00 | — | — | ||
| Erection of copper pipe 1/4" x 1/2" of 20 SWG along with 9 mm thick insulation | — | — | — | 500 | |
| — | 10.00 | — | — | ||
| Supply of CPVC drain pipe | — | — | — | 1,350 | |
| — | 10.00 | — | — | ||
| Erection of CPVC drain pipe | — | — | — | 100 | |
| — | 2.00 | — | — | ||
| Supply of 100 L Storage and cooling capacity of Fully stainless steel water cooler with 100 Ltrs/Hr RO water Purifier system with three years Warranty as per specifications attached. Make: Aquaguard or Eureka forbes or Honeybee or similar.(Warranty Period : Upto 36 months from the date of delivery.) | — | — | — | 1,55,114 | |
| — | 2.00 | — | — | ||
| Installation and commissioning of 100 L Storage and cooling capacity of Fully stainless steel water cooler with 100 Ltrs/Hr RO water Purifier system with three years Warranty as per specifications attached. Make: Aquaguard or Eureka forbes or Honeybee or similar.(Warranty Period : Upto 36 months from the date of delivery.) | — | — | — | 15,512 | |
| — | 2.00 | — | — | ||
| Supply of sand/mud proof 5 Star rated ISI marked Submersible pump set of 5.0 HP 22 stage vertical type submersible pump with head at duty point 150 Mtrs. approx. with a discharge of 33 LPM approx. suitable to work on Three phase 415V AC 50HZ, having pump maximum outer dia (4") or 100 mm & delivery Size 38mm, equivalent to KSB make model No. CORA 7C + UMAI 100 | — | — | — | 58,676 | |
| — | 2.00 | — | — | ||
| Erection, connecting, testing and commissioning of sand/mud proof 5 Star rated ISI marked Submersible pump set of 5.0 HP 22 stage vertical type submersible pump with head at duty point 150 Mtrs. approx. with a discharge of 33 LPM approx. suitable to work on Three phase 415V AC 50HZ, having pump maximum outer dia (4") or 100 mm & delivery Size 38mm, equivalent to KSB make model No. CORA 7C + UMAI 100 | — | — | — | 8,214 | |
| — | 2.00 | — | — | ||
| Fabrication and Supply of pump panel suitable for 5HP centrifugal/Submersible pump comprising of motor protection circuit breaker, DOL starter, electronic over current relay, 2KVAR capacitor, ammeter, voltmeter, LED pilot lamps, timer switch complete with all other connected accessories | — | — | — | 33,600 | |
| — | 2.00 | — | — | ||
| Fixing and commissioning of pump panel suitable for 5HP centrifugal/Submersible pump comprising of motor protection circuit breaker, DOL starter, electronic over current relay, 2KVAR capacitor, ammeter, voltmeter, LED pilot lamps, timer switch complete with all other connected accessories | — | — | — | 1,000 | |
| — | 200.00 | — | — | ||
| Foot | Square | — | — | ||
| Design, manufacture & display of wall / hanging / floor mounting type LED illuminated sign /direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 2,89,370 | |
| — | 200.00 | — | — | ||
| Foot | Square | — | — | ||
| Installation of wall / hanging / floor mounting type LED illuminated sign /direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate heet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 28,938 | |
| — | 192.00 | — | — | ||
| Foot | Square | — | — | ||
| Design, fabrication, & supply of LED single side glow sign boards made up of SS sheet IP 50/65 with high quality LEDs, 2 mm thick acrylic sheet topped on SS sheeted frame and is to be provided with computerised Vinyl stckering lettering in Telugu, Hindi, English, with all other connected accessories complete. Board should have uniform glow from end to end irrespctive of size as per specification. | — | — | — | 1,75,658.88 | |
| — | 192.00 | — | — | ||
| Foot | Square | — | — | ||
| Fixing of LED single side glow sign boards made up of SS sheet IP 50/65 with high quality LEDs, 2 mm thick acrylic sheet topped on SS sheeted frame and is to be provided with computerised Vinyl stckering lettering in Telugu, Hindi, English, with all other connected accessories complete. Board should have uniform glow from end to end irrespctive of size as per specification. | — | — | — | 24,591.36 | |
| — | 40.00 | — | — | ||
| Fabrication & supply of GI clamping arrangements for single side glow sign boars of different sizes. Necessary GI cross arms/GI rag bolts to fix the boards at a specified location to wall/roof is also to be supplied by the contractor as advised by site engineer. The wiring is to be made by 2 Nos. of 1.5 sqmm insulated multistranded FRLS copper wire through 1/2" PVC conduit pipe along with 14 SWG bare copper wire for earth continuity. | — | — | — | 14,936.8 | |
| — | 40.00 | — | — | ||
| Fixing of GI clamping arrangements for single side glow sign boars of different sizes. Necessary GI cross arms/GI rag bolts to fix the boards at a specified location to wall/roof is also to be supplied by the contractor as advised by site engineer. The wiring is to be made by 2 Nos. of 1.5 sqmm insulated multistranded FRLS copper wire through 1/2" PVC conduit pipe along with 14 SWG bare copper wire for earth continuity. | — | — | — | 2,091.2 | |
| — | 12.00 | — | — | ||
| Supply of following items with prewired external LED based lighting luminaire complete with cold rolled sheet steel deep drawn / aluminium spun housing duly stove enamel / powder coated painted , aluminium reflector,if required acrylic polystrene bowl cover, suitabale for following as required and as per standard specifications. LED Bollard Fitting with IP66 and IK08 Housing made up of aluminum pipe powder coated black after phosphochromate treatment with aluminum heat sink for effective thermal management with Operating temperature: -10°C to +45°C. Total Lenght of 500mm and diameter of 100mm.Physical diamensions are indicative only and can vary. Total system wattage of 9W - 10W with system Efficacy of 100 lm/w or more,Power factor > 0.95, CRI > 80, CCT corresponding to Warm white(ANSI Tolerance),THD(%) < 20, LED Lamp Efficacy > 130 Lm/W with Average life L70B50 @ 50000 hours, Interal Driver SPD of 4kV. Complete with Mounting Brackets & accessories as required with connections similar. Shall be of reputed make such as Havels / Phillips/Bajaj/Wipro.Model shall be fianalised in consultation with EIC. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate. Havells Cat Ref: TURINBLS10WLED857PSYMTOPC Or Equivalent | — | — | — | 90,109.08 | |
| — | 12.00 | — | — | ||
| Fixing, testing & commissioning of following items with prewired external LED based lighting luminaire complete with cold rolled sheet steel deep drawn / aluminium spun housing duly stove enamel / powder coated painted , aluminium reflector,if required acrylic polystrene bowl cover, suitabale for following as required and as per standard specifications. LED Bollard Fitting with IP66 and IK08 Housing made up of aluminum pipe powder coated black after phosphochromate treatment with aluminum heat sink for effective thermal management with Operating temperature: -10°C to +45°C. Total Lenght of 500mm and diameter of 100mm.Physical diamensions are indicative only and can vary. Total system wattage of 9W - 10W with system Efficacy of 100 lm/w or more,Power factor > 0.95, CRI > 80, CCT corresponding to Warm white(ANSI Tolerance),THD(%) < 20, LED Lamp Efficacy > 130 Lm/W with Average life L70B50 @ 50000 hours, Interal Driver SPD of 4kV. Complete with Mounting Brackets & accessories as required with connections similar. Shall be of reputed make such as Havels / Phillips/Bajaj/Wipro.Model shall be fianalised in consultation with EIC. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate. | — | — | — | 9,010.92 | |
| — | 1.00 | — | — | ||
| Design & Supply of power supply controller containing 3 Nos. of SMPS power supply units enclosed in SS enclosure with all connected accessories | — | — | — | 14,280 | |
| — | 1.00 | — | — | ||
| Erection & Commissioning of power supply controller containing 3 Nos. of SMPS power supply units enclosed in SS enclosure with all connected accessories | — | — | — | 300 | |
| — | 100.00 | — | — | ||
| Supply of CPVC pipe SDR-13.5 class -I pipe of size 20 mm (3/4 inch). | — | — | — | 11,170 | |
| — | 100.00 | — | — | ||
| Erection of CPVC pipe SDR-13.5 class -I pipe of size 20 mm (3/4 inch). | — | — | — | 300 | |
| — | 20.00 | — | — | ||
| Supply of CPVC 20 mm dia (3/4 inch) straight plain coupling including fixing etc | — | — | — | 311.2 | |
| — | 20.00 | — | — | ||
| Erection of CPVC 20 mm dia (3/4 inch) straight plain coupling including fixing etc | — | — | — | 40 | |
| — | 20.00 | — | — | ||
| Supply of CPVC 20 mm dia (3/4 inch) Tee including fixing etc | — | — | — | 582.8 | |
| — | 20.00 | — | — | ||
| Erection of CPVC 20 mm dia (3/4 inch) Tee including fixing etc | — | — | — | 40 | |
| — | 80.00 | — | — | ||
| Supply of metal clamp with suitable screws (length type) on concrete surface including provision of plugs with all accessories for CPVC 20 mm dia (3/4 inch). | — | — | — | 879.2 | |
| — | 80.00 | — | — | ||
| Fixing of metal clamp with suitable screws (length type) on concrete surface including provision of plugs with all accessories for CPVC 20 mm dia (3/4 inch). | — | — | — | 80 | |
| — | 80.00 | — | — | ||
| Supply of anchor bolts with heavy guage bracket for fixing of 40 mm dia CPVC pipe | — | — | — | 3,600 | |
| — | 80.00 | — | — | ||
| Erection of anchor bolts with heavy guage bracket for fixing of 40 mm dia CPVC pipe | — | — | — | 400 | |
| — | 10.00 | — | — | ||
| Supply of AC distribution box (including socket and plug) of rating 32A 5P 415v 50Hz complete | — | — | — | 24,780 | |
| — | 10.00 | — | — | ||
| Erection of AC distribution box (including socket and plug) of rating 32A 5P 415v 50Hz complete | — | — | — | 1,000 | |
| — | 20.00 | — | — | ||
| Supply of AC distribution box (including socket and plug) of rating 63A 5P 415v 50Hz complete | — | — | — | 1,06,760 | |
| — | 20.00 | — | — | ||
| Erection of AC distribution box (including socket and plug) of rating 63A 5P 415v 50Hz complete | — | — | — | 2,000 | |
| — | 26.00 | — | — | ||
| Supply of auto weld energy saver for welding transformer with input current upto 63A with contactor | — | — | — | 3,62,024 | |
| — | 26.00 | — | — | ||
| Erection of auto weld energy saver for welding transformer with input current upto 63A with contactor | — | — | — | 1,300 | |
| — | 8.00 | — | — | ||
| Supply of Rolling in examination light box made of MS sheet of 16 SWG, 3Nosof 40 W LED fittings including provision of 'ON" delay timer housing in enclosure suitable CC foundation, dismantling of existing box and fittings. The complete box should be as per Drg. approved by Dy.CEE/GS/SC | — | — | — | 1,51,272.72 | |
| — | 8.00 | — | — | ||
| Erection and commissioning of Rolling in examination light box made of MS sheet of 16 SWG, 3Nosof 40 W LED fittings including provision of 'ON" delay timer housing in enclosure suitable CC foundation, dismantling of existing box and fittings. The complete box should be as per Drg. approved by Dy.CEE/GS/SC | — | — | — | 15,127.28 | |
| — | 8.00 | — | — | ||
| Supply of off delay time switch with 10 A DP contactor , 10 A DP MCB in enclosure with on and off push buttons switches for operation of rolling examinations lights as per specification enclosed . | — | — | — | 59,601.92 | |
| — | 6.00 | — | — | ||
| Supply of Automatic light controlled nature switch device with infrared space grade sensors and advanced micro controller with suitable power contractor and MCB, enclosed in FRP enclosure for pole mounting confirming to IP: 54 or above suitable for working on 3phase supply and with 5kW power rating. | — | — | — | 95,580 | |
| — | 6.00 | — | — | ||
| Erection of Automatic light controlled nature switch device with infrared space grade sensors and advanced micro controller with suitable power contractor and MCB, enclosed in FRP enclosure for pole mounting confirming to IP: 54 or above suitable for working on 3phase supply and with 5kW power rating. | — | — | — | 9,558 | |
| — | 1.00 | — | — | ||
| Supply of 25 Ltr Geyser (5 star rated) | — | — | — | 6,800 | |
| — | 1.00 | — | — | ||
| Erection of 25 Ltr Geyser (5 star rated) | — | — | — | 952 | |
| — | 2.00 | — | — | ||
| Supply of Touch-Free Infrared Hand Dryer | — | — | — | 16,309.1 | |
| — | 2.00 | — | — | ||
| Installation and commissioning of Touch-Free Infrared Hand Dryer | — | — | — | 1,630.9 | |
| — | 1000.00 | — | — | ||
| Supply of 16A capacity push in type connectors set consisting of 1No. female connector and 1 no. Male Connector | — | — | — | 82,010 | |
| — | 1000.00 | — | — | ||
| Erection of 16A capacity push in type connectors set consisting of 1No. female connector and 1 no. Male Connector | — | — | — | 8,200 | |
| — | 2.00 | — | — | ||
| "Supply of Aluminium folding ladder four leg type size 14 feet (01 No),10 feet (01 No.) & 08 feet (01 no.) =1 set. (Warranty Period : Upto 30 months from the date of delivery.)" | — | — | — | 87,320 | |
| — | 30.00 | — | — | ||
| Supply of light weight aluminium scaffold tower ladder as per specification | — | — | — | 1,35,000 | |
| — | 10000.00 | — | — | ||
| Supply of Stainless Steel cable ties of length 300 mm, 3 mm width | — | — | — | 20,000 | |
| — | 10000.00 | — | — | ||
| Erection of Stainless Steel cable ties of length 300 mm, 3 mm width | — | — | — | 10,000 | |
| — | 200.00 | — | — | ||
| "Supply of Square Tubes of size 20 x 20 x 1.6mm, 6 meters length, (for Partition frames) to IS:4923 - 1997" | — | — | — | 84,488 | |
| — | 200.00 | — | — | ||
| "Erection of Square Tubes of size 20 x 20 x 1.6mm, 6 meters length, (for Partition frames) to IS:4923 - 1997" | — | — | — | 8,448 | |
| — | 3.00 | — | — | ||
| — | Lumpsum | — | — | ||
| Provision of removing unforeseen underground electrical infringements etc. as per the directions of engineer at site. | — | — | — | 1,50,000 | |
| — | 1.00 | — | — | ||
| Dseign & supply of 10 KWp rooftop on-grid solar plant with MPPT technology with Mono PERC Bifacial solar modules of 535wp or above, Module Mounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker (MPPT),Inverter (10KW output puresine wave inverter), and Controls and Protections, interconnect cables and switches ,all complete as per the standard specifications as per the direction of site Engineer | — | — | — | 5,39,474 | |
| — | 1.00 | — | — | ||
| Installation, testing and commissioning of 10 KWp rooftop on-grid solar plant with MPPT technology with Mono PERC Bifacial solar modules of 535wp or above, Module Mounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker (MPPT),Inverter (10KW output puresine wave inverter), and Controls and Protections, interconnect cables and switches ,all complete as per the standard specifications as per the direction of site Engineer | — | — | — | 75,526 | |
| — | 1.00 | — | — | ||
| Supply of 11 KV 630A, 21 KA 3 way, extensible, 3 circuit outdoor motorized RMU comprising of breaker (VCB), MCR type, +VVV+M etc. as per specification | — | — | — | 8,64,120 | |
| — | 1.00 | — | — | ||
| Erection, testing &commissioning of 11 KV 630A, 21 KA 3 way, extensible, 3 circuit outdoor motorized RMU comprising of breaker (VCB), MCR type, +VVV+M etc. as per specification | — | — | — | 30,000 | |
| — | 2.00 | — | — | ||
| Supply of 500 KVA,11/0.433 KV, 3 Phase,Copper Wound, OilImmersed, Outdoor Type,BIS:1180 / 2014 or latest Energy Efficient (Level 5) 5 star rated Distribution Transformer as per specification. | — | — | — | 20,44,618 | |
| — | 2.00 | — | — | ||
| Erection, testing &commissioning of 500 KVA,11/0.433 KV, 3 Phase,Copper Wound, OilImmersed, Outdoor Type,BIS:1180 / 2014 or latest Energy Efficient (Level 5) 5 star rated Distribution Transformer as per specification. | — | — | — | 2,04,462 | |
| — | 2.00 | — | — | ||
| Construction of transformer plinth for out door transformer of size 2.0Mtr X2.0Mtrx2.0Mtr with stone masonary with all connected accessories. | — | — | — | 10,160 | |
| — | 2.00 | — | — | ||
| Excavation of pit for transformer plinth for out door transformer of size 2.0Mtr X2.0Mtrx2.0Mtr | — | — | — | 4,000 | |
| — | 1.00 | — | — | ||
| Design, fabrication & Supply of 150 KVAR Automatic Power factor correction (APFC) PANEL with APFC Relay | — | — | — | 1,90,000 | |
| — | 1.00 | — | — | ||
| Erection, of 150 KVAR Automatic Power factor correction (APFC) PANEL with APFC Relay | — | — | — | 10,000 | |
| — | 1.00 | — | — | ||
| Design & Supply of 250KVA DG Sets complete as per specification in all respect on turnkey basis. As per COFMOW/IR/DG Set with AMF/2015(Rev-II) or latest Firm should obtain design approval from consignee before supply | — | — | — | 23,55,791 | |
| — | 1.00 | — | — | ||
| Installation, Testing & Commissioning of 250KVA DG Sets complete as per specification in all respect on turnkey basis. As per COFMOW/IR/DG Set with AMF/2015(Rev-II) or latest Firm should obtain design approval from consignee before supply | — | — | — | 2,35,579 | |
| — | 16.00 | — | — | ||
| Supply of 3 core HT cable Outdoor/Indoor end termination kits 50-95 sq.mm | — | — | — | 1,43,520 | |
| — | 16.00 | — | — | ||
| Erection of 3 core HT cable Outdoor/Indoor end termination kits 50-95 sq.mm | — | — | — | 18,960 | |
| — | 2.00 | — | — | ||
| Supply of Shock treatment boards. | — | — | — | 1,800 | |
| — | 2.00 | — | — | ||
| Supply of First Aid Box including medicines. | — | — | — | 3,150 | |
| — | 2.00 | — | — | ||
| Supply of portable Fire Extinguishers dry chemical type 9/10 Kgs. Capacity fitted with gun metal cap. Drychemical powder 9/10 Kgs conform to IS:4303 and carbondioxide conform to IS 4947. | — | — | — | 25,704 | |
| — | 2.00 | — | — | ||
| Supply of Danger boards in Hindi/English and on enameled steel plate with clamps, bolts, nuts etc . | — | — | — | 730 | |
| — | 2.00 | — | — | ||
| Fixing of Danger boards in Hindi/English and on enameled steel plate with clamps, bolts, nuts etc . | — | — | — | 200 | |
| — | 2.00 | — | — | ||
| Supply of Fire Buckets including stand | — | — | — | 12,852 | |
| — | 2.00 | — | — | ||
| Supply of Earth Discharge rod. | — | — | — | 1,300 | |
| — | 4.00 | — | — | ||
| Supply of 11kV Hand Gloves. | — | — | — | 240 | |
| — | 18.00 | — | — | ||
| Supply of 20mm size ballast | — | — | — | 9,000 | |
| — | 18.00 | — | — | ||
| Spreading of 20mm size ballast | — | — | — | 1,800 | |
| — | 20.00 | — | — | ||
| Supply of fencing panels at transformers (or) sub-station. | — | — | — | 36,860 | |
| — | 20.00 | — | — | ||
| Erection of fencing panels at transformers (or) sub-station. | — | — | — | 1,140 | |
| — | 2.00 | — | — | ||
| Supply of fencing uprights | — | — | — | 1,19,630 | |
| — | 2.00 | — | — | ||
| Erection of fencing uprights | — | — | — | 3,118 | |
| — | 2.00 | — | — | ||
| Supply of gate | — | — | — | 3,710 | |
| — | 2.00 | — | — | ||
| Erection of gate | — | — | — | 310 | |
| — | 15.00 | — | — | ||
| "Supply of synthetic insulating rubber mat of size 1 meter*2 meter length, thickness 6mm as per IS: 15652/2006, Class-C with ISI mark for 33KV grade." | — | — | — | 87,615 | |
| — | 3.00 | — | — | ||
| Supply of erected drawings for Substation Plan & Eathing interconnections with soft copies in DVD as well hardcopies in the Auto CAD (6 sets each). | — | — | — | 2,877 | |
| — | 2.00 | — | — | ||
| Supply of HT/LT schematic diagram with lamination of size 2000x1200mm including ficing as per specification | — | — | — | 18,788 | |
| — | 2.00 | — | — | ||
| — | Lumpsum | — | — | ||
| Preparation and submission of completion drawings in A3 size with all relevant details and measurements of executed installations, cable routings, lighting arrangements etc. The drawings shall be submitted in 1 (Soft Copy)+ 3 (Hard Copy) duly signed by the concerned Supervisor, contractor, controlling officer and to be furnished along with bills. | — | — | — | 20,000 | |
| — | 50.00 | — | — | ||
| Hiring & Provision of Single or Three phase 10 KVA or above DG set with oil including all necessary accessories etc. as per instructions of site Engineer. (5 Days X 10Nos.) | — | — | — | 2,23,500 | |
| — | 500.00 | — | — | ||
| Hiring & Provision of LED light fittings 150 W/200 W with IP65 including laying of 3 core x 1.5 sq.mm flexible cord wire till supply source through PVC conduit pipe/open. as per instructions of site Engineer. (5 Days X 100 Nos.) | — | — | — | 55,000 | |
| — | 250.00 | — | — | ||
| Hiring & Provision of Switch boards with 8 Nos. of weather proof plug sockets including necessary accessories like incoming power supply points etc. (5 Days X 50 Nos.) | — | — | — | 10,000 | |
| — | 10.00 | — | — | ||
| "Transportation charges for shifting of 10 kVA or above capacity D.G.Sets and loading & unloading charges including labour charges etc." | — | — | — | 22,000 | |
| — | 50.00 | — | — | ||
| Manning of location for operation of DG set, lighting arrangements including fixing and dismantling to Bamboos, LED fittings and Shifting lighting arrangements on day to day basis including refeuling of DG set and failure attention and rectification of failures etc. (Skilled) (5 days X 10 man power per day) | — | — | — | 45,000 | |
| — | 50.00 | — | — | ||
| Manning of location for operation of DG set, lighting arrangements including fixing and dismantling to Bamboos, LED fittings and Shifting lighting arrangements on day to day basis including refeuling of DG set and failure attention and rectification of failures etc. (UnSkilled) (5 days X 10 man power per day) | — | — | — | 35,000 | |
| — | 50.00 | — | — | ||
| Hiring & Provision of High speed Pedastal fans of above 1400 rpm with 450 mm sweep duly laying 3Cx1.5 sq.mm cord till supply source as per instructions of site engineer.(5 Days X 10 Nos.) | — | — | — | 11,500 | |
| — | 10.00 | — | — | ||
| "Provision of temporary LT Earthing arrangements with GI pipe of 40mm dia 3m long. With all other connected materials like, charcoal, salt." | — | — | — | 30,000 | |
| — | 20000.00 | — | — | ||
| "Hiring of 3 core x 4 Sq.mm 1100 V PVC (FRLS) insulated multi stranded copper wire for extending of power supply to various equipments as per direction of site Engineer (5 days X 4000 Mtrs) " | — | — | — | 20,000 | |
| — | 10000.00 | — | — | ||
| "Hiring of 3 core x 6 Sq.mm 1100 V PVC (FRLS) insulated multi stranded copper wire for extending of power supply to various equipments as per direction of site Engineer (5 days X 4000 Mtrs) " | — | — | — | 15,000 | |
| — | 25.00 | — | — | ||
| Hiring & Provision of Air coolers with above 70 Liters capacity & 3 speed control along with fill of water including all necessary accessories, power supply arrangements etc., wherever required as per instructionsof site engineer. The price shall include filling of water & shifting of cooler as per site requirement (5 Days X 5Nos.) | — | — | — | 5,750 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_1111.pdf correction
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
ACSsupto10_1.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_1111.pdf
ATTACHMENT
ATCLSJUNCTIONBOXES.pdf
ATTACHMENT
RDSOspecificationforHVLSFans.pdf
ATTACHMENT
SpecificationforTransformers.pdf
ATTACHMENT
SpecificationforDGSets.pdf
ATTACHMENT
Signage_Polycarbonate_Sheet_Specification.pdf
ATTACHMENT
Specificationfor10KWpRooftopSolarPlant.pdf
ATTACHMENT
TenderBooklet_Rajura_10-GS-SC-WS-26-27_FF_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].