REPAIR/REPLACEMENT TO BARBED WIRE FENCING INCL POSTS, ROAD BERM, HARD STANDING AND COMPOUND WALL AT MIL STN SANGRUR.

Amount

Dismantling posts or struts (wood,steel,or RCC) any section, including taking out embedded portion including demolition of concrete foundation and removal of waste material and making good disturbed ground complete all as directed.

Dismantling fencing wire mesh (Barbed/chain link) any type, incl removal, complete all as specified

Excavating in post holes (or similar holes) each n exc 0.50 cum in soft / loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, complete all as specified and directed by Engr-in-charge.

M & L for PCC 1:3:6, type B-1, using 40mm graded stone aggregate as in foundation for post holes complete all as specified and directed by Engr-in-charge.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and straining and fixing to any type standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as directed by Engr-in-charge. Note : Each line wire to be measured

Restraining, resecuring including making good staples of Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and provisin of galvanised mild steel wire, staple or steel pins etc as directed by Engr-in-charge.

S F Joist, channel, angle, or tee sections, fixed independently, without connecting plates,Gde Fe-410-S as in fencing post incl necessary flat iron,10mm dia MS round bars,drilling holes and binding including erection of post in position, etc complete all as specified and directed.

Preparing new steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

Supply & fixing chain link Mild steel galvanized fencing of size 4 mm dia and 100 x 100 mm mesh size, complete all as specified and directed.

Preparing new steel surfaces of any description,wood,steel,iron,concrete, brick, stone, etc, exceeding 10 cm width or girth and applying two coats of Black bituminous paint complete all as specified and directed.

Demolition of Brick work including all quains and arches pillars etc built in cement mortar or cement lime mortar and removal of unserviceable material from site complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' old size bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

All as per serial item no 12 but except bricks

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris from site complete all as specified and as directed

M & L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls etc and applying two coat of cement base paint over a coat of chalk whiting (as primer) complete all as specified and as directed.

Preparation of old plastered or unplastered surfaces of walls etc and applying one coat of cement base paint complete all as specified and as directed.

Dismantling of bricks laid flat or on edge, laid dry as in road berms etc. complete including removal complete all as specified and directed.

Bricks, old size sub class 'B' laid dry on edge, on and including 25mm thick layer of sand and filling the joints with the sand. ( bricks to be used as retrived from item No 10 above) complete all as specified and directed.

Continuous brick edging with width equal to the width of brick, laid dry on end vertically using old size sub class 'B' bricks of compressive strength not less than 100kg per Sqcm including necessary excavation and earth work ( bricks to be used as retrived from item No 10 above)complete all as specified and directed.

Surface excavation not exc 30 cm deep and avg 15 cm deep and getting out in soft and loose soil complete all as specified.

Removing excavated material exc 50 m and n. exc 250 m deposited where directed at a level n.exc 1.5 m above the starting point for soil, complete all as specified and directed.

75mm thick Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base under floors etc complete all as specified and as directed.

M &L for Rubber moulded Machine pressed precast concrete interlocking paver block(available in different colour for making patterns) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gray cement and pigment laid over 25mm thick sand cushioning complete all as specified and directed.

Factory made Pre-cast concrete blocks of size 300mmx150mm & thickness varying 150mm at bottom and 100mm at top M-20 (Design mix ) rounded or chamfered edges as in kerb stones set in CM 1:4 complete all as specified and directed

Preparing new surfaces of concrete, brick, stone etc, exceeding 10 cm width or girth and applying two coats of black bituminous paint, complete all as specified and directed.

S&F in replacement Solar delinator made of polycarbonate and toughned aluminium alloy body of 80mm dia and 1000mm height, 4 nos LED which gives 360 degree veiwing, solar panel 2.5 V, 1.25 V rechargeable battery-01 nos, embedded in PCC 1:2:4 type B-2 of block size, 20cm x 30cm x 30cm including necessary earthwork and taking down old unserviceable delinator complete and specified and directed.

S&F in replacement solar stud of 3 LED's of colour red / yellow on one side (total 6 Nos) housed in a tough pressure die-casted aluminium alloy of size 125mm x 125mm of heihgt 200mm with build in stress nail 37mm x37mm x 55mm long for fixing Epoxy LED's solar cell , battery and light sensor well protected inside under tough unbreakable polycarbonate transparent sheet roof system workable for 2-3 days (night) after full charge in 8-10 hrs and taking down old unserviceable solar stud complete and specified and directed.

m/s narinder kumar sons

FAVOURITE ENGINEERS

M/s MANN CONSTRUCTIONS