External Blockwork, Doors, Rolling Shutters along with miscellaneous finishing works of Block-102A and associated areas at INRPC, NRB, BARC, Tarapur

Amount

Providing and Laying Solid cement concrete block masonry with M-5 Grade of 190/ 140 mm thick in super structure in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 nos of 8 mm dia bars at every third course of the masonry work

Providing and Laying Autoclaved Aerated cement block masonry of approved make with specified thick AAC Blocks in Super structure above plinth level up to 20 m height in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 nos of 8 mm dia bars at every third course of the masonry work

Extra for Autoclaved Aerated Cement Block masonry in super structure above 20 m height and up to and including 40 m height by lifting materials using mechanical means (tower crane) / by manual lifting

Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.

Providing and fixing TMT Steel Reinforcement bars of specified grades manufactured using virgin materials confirming to IS 1786 for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Using TMT bars of specified grades.

Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanity counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Providing and fixing of Hollow metal Two Hour fire rated doors consisting of door frame and shutters and all hardware fittings as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specifications. The recommended fire doors shall have type test report from CBRI or ARAI for minimum rating of 2 hours with vision panel. Deviation in specification and sheet thickness other than what is mentioned in the test certificates shall not be allowed. Proper label confirming the type of door and the hourly rating shall be mandatory. Door shall include fixing 4 nos heavy duty stainless steel 304 grade ball bearing, fire tested stainless steel butt hinges of size 100 x 75 x 3.00 mm (heavy weight) of approved make with suitable stainless steel screws, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stainless steel tower bolt / concealed tower bolt etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fasteners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge

Supplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS lathes 18 gauge interlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with push and pull operation complete including the cost of providing and fixing necessary springs of required size and M. S top cover of required thickness for rolling shutters Rolling shutters (Laths Interlocked) gear operated type with handles including top hood 1.25mm mm thick

Extra over the cost of rolling shutters for providing and fixing motorized arrangements( with remote & manual operation) including designing, control panels, limit switches, required wiring and cables from panel to motor and required size of shaft etc of approved make all as per standard specifications including commissioning and testing complete as directed by the Engineer-in-charge.(only power supply point will be provided) For rolling shutters up to 15.00 sq.m opening area

Extra over the cost of rolling shutters for providing and fixing motorized arrangements( with remote & manual operation) including designing, control panels, limit switches, required wiring and cables from panel to motor and required size of shaft etc of approved make all as per standard specifications including commissioning and testing complete as directed by the Engineer-in-charge.(only power supply point will be provided) For rolling shutters above 15.00 Sq.m and up to 30.00 sq.m opening area

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealant etc. (fittings glazing and panelling shall be paid for separately) Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With clear float glass panes of 4.0 mm thickness

Providing and fixing 6 mm thick e-board in panelling, masking, fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge

Providing and fixing fire rated Steel Rim Panic Exit Device of approved brand & quality in single leaf door upto 1000mm wide including all accessories etc. complete.

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 10 metres but up to a height of 13 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 13 metres but up to a height of 16 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 16 metres but up to a height of 19 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 19 metres but up to a height of 22 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 22 metres but up to a height of 25 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 25 metres but up to a height of 28 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 28 metres but up to a height of 31 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 31 metres but up to a height of 34 metres

Extra for Plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Above 34 metres but up to a height of 37 metres

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Extra for cutting of reinforcement in RCC, stacking the same and returning the steel scrap to the departmental stores all as per direction of Engineer-in-charge

Making the opening in brick masonry for door / window / clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/ rubbish to the nearest dumping ground

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. Debris up to 1 km

Core cutting in RCC up to and including 50 mm Dia

Core cutting in RCC beyond 50 mm up to and including 100 mm Dia

Core cutting in RCC beyond 100 mm up to and including 150 mm Dia

Core cutting in RCC beyond 150 mm up to and including 200 mm Dia

Manufacture, supply and installation of louvers made of 4 mm thick aluminium composite panels of approved make in the external vertical face and flush with the facade system for inlet of fresh air as per the design / details including all necessary aluminium (with minimum 25 micron thick anodisation) frames, sub frames, peripheral flashings to avoid any ingress of water inside the building with stainless steel bird wire mesh on the inside etc. complete as per details in approved shop drawing and specifications

Assistance to perform various cleaning activities by unskilled manpower

Supply and embedment of 14 SWG heavy duty hot dipped GI conduit pipe(25mm Dia) along with all accessories such as bends, junction box, socket, check nut, fish wire etc. including making threads, bends, removing burrs, connection of accessories, drawing of fish wire, laying in RCC slab, beam and wall, cutting & Laying in brick wall, etc. as required under the instruction of Engineer-in-incharge. Deep junction box of min 75mm deep or as required shall be provided. Supply

Supply and embedment of 14 SWG heavy duty hot dipped GI conduit pipe(25mm Dia) along with all accessories such as bends, junction box, socket, check nut, fish wire etc. including making threads, bends, removing burrs, connection of accessories, drawing of fish wire, laying in RCC slab, beam and wall, cutting & Laying in brick wall, etc. as required under the instruction of Engineer-in-incharge. Deep junction box of min 75mm deep or as required shall be provided. Installation

Supply and erection of GI enclosure fabricated out of 2mm thick pre galvanised GI sheet steel with required cutting, welding, bending, stiffners as per drawings and embed in concrete or brick wall, cutting brick wall to suit size, etc as required under the instruction of Engineer-In-Charge. Supply

Supply and erection of GI enclosure fabricated out of 2mm thick pre galvanised GI sheet steel with required cutting, welding, bending, stiffners as per drawings and embed in concrete or brick wall, cutting brick wall to suit size, etc as required under the instruction of Engineer-In-Charge. Installation

Supply and embedment of copper earth plate/pad of size 40 mm wide x 6mm thick x 550 mm long having 10 nos. of 10 mm dia . Tapped hole for outgoing connections and 11 mm dia. Rod on back side for brazing of 2 nos. 95 sq. mm copper conductor including brazing, connection with suitable hardwares, mounting arrangement etc. as required.

Supply and Laying of 14 SWG Cu-ETP grade bare solid tinned copper conductor. Supply

Supply and Laying of 14 SWG Cu-ETP grade bare solid tinned copper conductor. Installation

Concelaed/Surface Installation of 95 Sq.mm tinned stranded bare copper earthing conductor in Brick wall along with making of chasing, finishing of wall. (Conductor to be provided as FIM by department)

Supply and Installation of Heavy Duty Class-C GI pipe of following size to be laid in brick wall for laying cables. 50NB

Supply of required material and making of exothermic braze joints of copper conductor with other conductor or copper earthing pad including removal of burrs and debris as per technical specification and instruction of engineer in charge.

DIPAK S PIMPLE ENGINEERS AND CONTRACTORS (BID ID -3243159)