REPAIR AND MAINT OF DG SETS FOR WATER SUPPLY FIRE HYDRANTS FIRE ALARM SYSTEM FORCED CIRCULATION HOT WATER SUPPLY AND MECHANICAL LAUNDRY WITH OTHER ALLIED WORKS AT NDA KHADAKWASLA

Amount

Repair/ maintenance of DG set of capacity 500KVA, 1500 r.p.m Make of engine Greaves Ltd, and alternator Stampford, Maker No 3309121703763 installed at MES Raw Pump house for effective and efficeint functioning including repairs & replacement of all consumable/ moving parts/Stable parts i.e. head,liner piston,crank shaft,oil ptressure pump etc. of Engine and alternator all as specified and directed by Engineer-in-charge. maintenance shall be carried out comprises of following work services:- a) Check/ inspect the functioning of all stationary and rotary parts of engine & alternator thoroghly and repair/replace where necessary for smooth functioning. b) Check lubricating oil level of engine if less top it up with new lubricating oil of proper grade as directed by Engr-in-charge. Including Replace Lub oil filter and fuel filter . c) Check water/ coolant level of radiator if less top up. d) Check battery terminal condition do needful tightening. e) Check distilled water level of battery if less top it up to required level. f) Check fan belt tension, adjust if required and replace when become unserviceable. g) Remove air cleaner element from air cleaner assy,clean it and place it at its existing position also check the oil pot and re fill if necessary. h) Check generator cum alternator coupling, replace bushes if required. j) check serviceability of dynamo, starter & minor repair these where necessary. check all electric connection of alternator & panels do needful tightening for trouble free functioning. k) Clean the DG set outer body and radiator thoroughly with cleaning agent and pressure jet. l) Start engine, check oil pressure, oil temp, battery charging meter, r.p.m, Voltage output, frequency, etc if any problem report to concerned MES rep and repair the defects immediately m)Check the battery condition and charge the battery.n) Check liner & Piston. o) Check crank shaft p) Check oil pressure pump Note : (i) Parts required for replacement shall be measured and paid seperately.

Servicing, repairing, calibartion of FIP set with specified manufacture's instruction and replacement of unserviceable component by providing new as per existing size and make all as required at site of DG Set 500 KVA.

Disconnecting all incoming and outgoing rubber hose from radiator and drain out checking radiator assembly and taking down the radiator assembly for carrying out servicing, cleaning thoroughly the choke pipe, soldering/ brazing the leakage pipe after completion of above work, refixing the same to its original position of 500 KVA DG sets .

M & L for draining out the fuel tank of DG Set of 500 KVA capacity and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, including one coat of black synthetic enameled paint over a coat of red oxide and reflxing the tank to its original position & refilling the fuel back into the tank.

Repair/ maintenance of DG set of capacity 320KVA, 1500 r.p.m Make of engine Greaves Ltd, model TBD 24V, and alternator Stampford, SM No 177079 installed at MES 'D' Pump house quarterly(as ordered by Engr-in-charge) for effective and efficeint functioning including repairs & replacement of all consumable/ mooving parts of Engine and alternator all as specified and directed by Engineer-in-charge. maintenance shall be carried out comprises of following work services:- a) Check/ inspect the functioning of all stationary and rotary parts of engine & alternator thoroghly and repair/replace where necessary for smooth functioning. b) Check lubricating oil level of engine if less top it up with new lubricating oil of proper grade as directed by Engr-in-charge. Including Replace Lub oil filter and fuel filter . c) Check water/ coolant level of radiator if less top up. d) Check battery terminal condition do needful tightening. e) Check distilled water level of battery if less top it up to required level. f) Check fan belt tension, adjust if required and replace when become unserviceable. g) Remove air cleaner element from air cleaner assy,clean it and place it at its existing position also check the oil pot and re fill if necessary. h) Check generator cum alternator coupling, replace bushes if required. j) check serviceability of dynamo, starter & minor repair these where necessary. check all electric connection of alternator & panels do needful tightening for trouble free functioning. k) Clean the DG set outer body and radiator thoroughly with cleaning agent & pressure jet. l) Start engine, check oil pressure, oil temp, battery charging meter, r.p.m, Voltage output, frequency, etc if any problem report to concerned MES rep and repair the defects immediately. m)Check the battery condition and charge the battery. n) Check the starter functioning properly if not replace when become unserviceable Note : Spare required for replacement shall be measured and paid seperately.

Servicing, repairing, calibartion of FIP set with specified manufacture's instruction and replacement of unserviceable component by providing new as per existing size and make all as required at site of DG Set 320 KVA.

Disconnecting all incoming and outgoing rubber hose from radiator and drain out checking radiator assembly and taking down the radiator assembly for carrying out servicing, cleaning thoroughly the choke pipe, soldering/ brazing the leakage pipe after completion of above work, refixing the same to its original position of 320 KVA DG sets .

M & L for draining out the fuel tank of DG Set of 320 KVA capacity and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, including one coat of black synthetic enameled paint over a coat of red oxide and refixing the tank to its original position & refilling the fuel back into the tank.

Ditto all as per item No 5 above but DG set capacity 63 KVA Make of Engine Greaves Ltd model 3YDC MK III and alternator Kirloskar, SM NO 176735 installed at Booster Pump House.

Servicing, repairing, calibartion of FIP set with specified manufacture's instruction and replacement of unserviceable component by providing new as per existing size and make all as required at site of DG Set 63 KVA.

Disconnecting all incoming and outgoing rubber hose from radiator and drain out checking radiator assembly and taking down the radiator assembly for carrying out servicing, cleaning thoroughly the choke pipe, soldering/ brazing the leakage pipe after completion in of above work reflixing the same to its original position of 63 KVA DG sets

M & L for draining out the fuel tank of DG sets of 63 KVA capacity and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, leak testing the tank and welding/brazing including one coat of black synthetic enameled paint over a coat of red oxide and refixing the tank to its original position & refilling the fuel back into the tank .

Ditto all as per item No 5 above but DG ste capacity 30 KVA Make of Engine Kirloskar, model RB33 and alternator Kirloskar, SM NO 176734 installed at Filter House.

Servicing, repairing, calibartion of FIP set with specified manufacture's instruction and replacement of unserviceable component by providing new as per existing size and make all as required at site of DG Set 30 KVA.

Disconnecting all incoming and outgoing rubber hose from radiator and drain out checking radiator assembly of DG sets and taking down the radiator assembly transporting the same to civil workshop for carrying out servicing, cleaning thoroughly the choke pipe, soldering/ brazing the leakage pipe after completion in of above work refixing the same to its original position for the 30 KVA DG set

M & L for draining out the fuel tank of DG Set 30 KVA capacity and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, leak testing the tank and welding/brazing including one coat of black synthetic enameled paint over a coat of red oxide and refixing the tank to its original position & refilling the fuel back into the tank .

Ditto all as per item No 05 above but DG set 40 KVA Make of Engine Kirloskar, coupled with Pump & Motor of 40 KVA installed R SQn.

Servicing, repairing, calibartion of FIP set with specified manufacture's instruction and replacement of unserviceable component by providing new as per existing size and make all as required at site of DG Set 40 KVA.

Disconnecting all incoming and outgoing rubber hose from radiator and drain out checking radiator assembly and taking down the radiator assembly for carrying out servicing, cleaning thoroughly the choke pipe, soldering/ brazing the leakage pipe after completion of above work, reflixing the same to its original position of DG Set 40 KVA.

M & L for draining out the fuel tank of DG Set 40 KVA capacity and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, leak testing the tank and welding/brazing including one coat of black synthetic enameled paint over a coat of red oxide and refixing the tank to its original position & refilling the fuel back into the tank.

Repair/ maintenance of DG set of capacity 5KVA, Single Phase, 1500 r.p.m Make of engine Kirloskar, and Alt Make Kirloskar installed at different locations of various guard posts at NDA for effective and efficeint functioning including repairs & replacement of all consumable/ moving parts of Engine and alternator all as specified and directed by Engineer-in-charge. maintenance shall be carried out comprises of following work services:- a) Check/ inspect the functioning of all stationary and rotary parts of engine & alternator thoroghly and repair/replace where necessary for smooth functioning. b) Check lubricating oil level of engine if less top it up with new lubricating oil of proper grade as directed by Engr-in-charge. Including Replace Lub oil filter and fuel filter . c) Check battery terminal condition do needful tightening. d) Check distilled water level of battery if less top it up to required level. e) Check fan belt tension, adjust if required and replace when become unserviceable. f) Remove air cleaner element from air cleaner assy,clean it and place it at its existing position also check the oil pot and re fill if necessary. g) Check generator cum alternator coupling, replace bushes if required. h) check serviceability of dynamo, starter& minor repair these where necessary. check all electric connection of alternator & panels do needful tightening for trouble free functioning. j) Clean the DG set outer body and radiator thoroughly with cleaning agent & pressure jet. k) Start engine, check oil pressure, oil temp, battery charging meter, r.p.m, Voltage output, frequency, etc if any problem report to concerned MES rep and repair the defects immediately. l) Check the battery condition and charge the battery. m) Check the starter functioning properly if not replace when become unserviceable Note : Parts required for replacement shall be measured and paid seperately.

Taking down DG set 5KVA capacity Make:Kirloskar installed and removing for top overhauling including preventive maint i.e removing head,liner piston,connecting rod etc.and check serviceability and refixing after cleaning and replace defective items of connected assembling the same included at NDA Out post Note: Parts reqd for replacement shall be measured and paid seperately.

Servicing, repairing, calibartion of Dg set with specified manufacture's instruction and replacement of unserviceable component by providing new as per existing size and make all as required at site of DG Set 5 KVA..

M & L for draining out the fuel tank of 5 KVA DG sets of the following capacities and keeping it in a separate container, cleaning the fuel tank all lnternally & externally by removing all the accumulated sediments, leak testing the tank and welding/brazing including one coat of black synthetic enameled paint over a coat of red oxide and refixing the tank to its original position & refilling the fuel back into the tank.

Servicing / maintenance of Diesel Engine set of capacity 28BHP Make of Engine Crompton Greaves , Type CE 28ES and Pump make Kirloskar, capacity 100.8Cum/Hrs Engine Sl No 06100043 installed at Peacock Bay. comprises of Servicing of Engine, Pump and replacement of unserviceable/ wornout parts incl necessary repair required for smooth functioning. Note : (i) Parts required for replacement shall be measured and paid seperately. Lubricating Oil required for refilling & Replacement.

Taking down unsv exhaust fan motor for 5KVA DG set capacity installed at various locations cleaning of slots thoroughly ,removing all dirt ,grease and other unwanted particle, replacement of unserviceable parts where required including exhaust fan blade as specified and directed

Taking down DG set starter upto 320KVA capacity at various locations removing /repairing of all defective parts like carbon bush,winding wire in suitable size ,negative and positive terminal plate etc.after refixing the same and replace and reinstalled in exact position. Note: Replacement of spares shall be paid seperately

S&F in replacement PCB / control card of voltage stabilizer of capacity 50 KVA at swimming pool-2

S&Fin replacement PCB / control card of voltage stabilizer of capacity 15 KVA at Golf club

S&F in replacement PCB / control card of voltage stabilizer of capacity 100 KVA at Booster pump

S&F in replacement PCB / control card of voltage stabilizer of capacity 40 KVA at pump house

S&F in replacement Servo motor of capacity 50 KVA, of Make as per sample or as directed

S&F in replacement Servo motor of capacity 15 KVA, of Make as per sample or as directed

S&F in replacement Servo motor of capacity 100 KVA, of Make as per sample or as directed

S&F in replacement Servo motor of capacity 40 KVA, of Make as per sample or as directed

Dehydration/filtration of insulation oil in the stablizer of 15 KVA,50KVA,100 KVA with stream line filtration machine to achieve dielectric strength not less than 45KV at 2.5mm gap including testing coplete all as specified and as directed

Topping of Transformer oil conforming to IS duly dehydrated of die electric strength of 45KV for various capacity stabilizers

PARTS FOR 500 KVA DG SET MAKE GREVES Ltd At Raw pump house. Supply only V belt for fan/Dynamo assy etc ( V belt A-41-3 Nos & A-32 - 1No)

Supply only Diesel oil/fuel filter.

Supply only Air filter elements Main & Inner complete incl sealing ring.

Supply only Gasket exhaust manifold

Supply only Gasket Air inlet manifold

Supply only oil Sump gasket

Supply only water hose set complete.

Supply only water hose clamp set complete.

Supply only Air hose set complete

Supply only Solenoid 24 Volt.

Supply only Joint for rocker cover.

Supply only element oil filter

Supply only Fuel filter element Primary.

Supply only Fuel filter element Micro.

Fuel pipe Flexible for Fuel Return with Benjo bolt and copper washer.

Supply only water pump

Supply only heavy duty fuel injection pipe

Supply only O ring

Supply only Suction Strainer

Check the battery condition and recharge the battery.

Supply only delivery pipe

Supply only Gasket strainer

Supply only starter

PARTS FOR 320 KVA DG SET MAKE GREVES Ltd At 'D' pump house. Supply only V belt for fan/Dynamo assy etc ( V belt A-41-3 Nos & A-32 - 1No)

Supply only Diesel oil/fuel filter.

Supply only Air filter elements Main & Inner complete incl sealing ring.

Supply only Gasket exhaust manifold

Supply only Gasket Air inlet manifold

Supply only oil Sump gasket

Supply only water hose set complete.

Supply only water hose clamp set complete.

Supply only Air hose set complete

Supply only Solenoid 24 Volt.

Supply only Joint for rocker cover.

Supply only element oil filter

Supply only Fuel filter element Primary.

Supply only Fuel filter element Micro.

Fuel pipe Flexible for Fuel Return with Benjo bolt and copper washer.

Supply only Lubricant pump

Supply only heavy duty fuel injection pipe

Supply only O ring

Check the battery condition and recharge the battery.

Supply only suitable Starter

PARTS FOR 63 KVA DG SET MAKE GREVES Ltd at Booster pump House. Supply only V belt for fan/Dynamo assy etc (2 for radiator fan and one for dynamo)

Supply only Air filter elements Main & Inner complete incl sealing ring.

Supply only solenoId valve 12Volt

Supply only oil sump gasket

Supply only water hose set complete.

Supply only Oil temp switch set complete.

Supply only Oil temp gauge set complete.

Supply only oil filter set complete.

Supply only diesel filter set complete.

Supply only hose clamp set complete.

Supply only Air hose set complete

Supply only Gasket exhaust manifold

Supply only Gasket Air inlet manifold

Supply only Fuel filter element Primary.

Supply only Fuel filter element Micro.

Battery Treminals made of PVC insulated flexible copper conductor, size of conductor 50sqmm duly soldered with brass terminal lugs/clamps for Positive, Negetive (each 1.5mtr long) complete.

Supply only O ring

Supply only heavy duty fuel injection pipe

Check the battery condition and charge the battery.

Supply the suitable Starter

PARTS FOR 40/30/5 KVA DG SET MAKE KOEL at filter house/DSC post Supply only V belt for fan/water pump assy etc

Supply only Air filter elements Main & Inner complete incl sealing ring.

Supply only solenold 12Volt

Supply only oil sump gasket

Supply only water hose set complete.

Supply only hose clamp set complete.

Supply only Air hose set complete

Supply only Gasket exhaust manifold

Supply only Gasket Air inlet manifold

Supply only element oil filter

Supply only expansion bellow

Supply only Fuel filter element Primary.

Supply only Fuel filter element Micro.

Supply only Fuel line High pressure pipe from pump to Nozzle Holder incl Banjo for 5 KVA DG set

Supply only O ring

Check the battery condition and charge the battery.

Piston Assembly

Cylinder liner

Piston Ring

Nozzle Repairing

Engine wiring harness

Piston Guide

Gasket for cylinder head

Supply only air delivery pipe

Sub assy rocker cover

Rubber hose air cleaner

Bracket for air cleaner

Primary element

Air delivery pipe

Supply valve head

valve seat

Supply valve seal

VAF meter

Mounting pad

Supply C R Bearing

Supply Gasket head

Engine liner & Piston

Head repairing

valve guide

Supply the suitable starter

Single phase exhaust fan motor

PARTS FOR Crompton Engine driven pump 40 BHP at 'R' Sqn Supply only V belt A-50 and A 1022

Supply only Air filter elements

Supply only oil sump gasket

Supply only water hose set complete.

Supply only hose clamp set complete.

Supply only Gasket exhaust manifold

Supply only Gasket Air inlet manifold

Supply only element oil filter

Supply only Fuel filter element Primary & secondary.

Supply only Radiator fan suitable for Engine Make Greaves type CE28E-5.

Governor tye rod with spring and rubber burdon cover.

Supply only 12V battery capacity 150AH Make: Exide/Luminous

Supply only distilled water in standard packing/sealed container

Supply only coolant in standard packing/sealed container

Supply only lubrication oil of grade SAE 15W 40 or 20W40 in standard packings/sealed container

Supply only asbestos rope of any size as required at site

Supply only Diesel filter Make MICO

Supply only Nozzle assy Part No 115117243

Supply only Photocell light detector Part No 91740907

Supply only Burner as per existing Part No 91570602

Supply only solonoid valve as per existing Part No 91597303

Supply only ignition electrode as per existing Part No 11934201

Supply only Thermo coupler as per existing Part No 1200001

Supply only digital Temperature indicating meter of range 0⁰C to 1200⁰C and fixed to panel as per existing Part No 1200001

Supply only Timer suitable for panel make L & T/ GIC/ Minilac.

Repairs/Servicing and washing with jet pump including necessary chemical cleanning agent of mechanical laundry 25 kg capacity, Make Lucky Engineering Works installed at Military Hospital NDA. Including replacement of following unserviceable parts required for smooth functioning.

Bearing Set Washer Extractor of Make NBC,SKF as existing

Laundry Timer

Timer, 0-60 min

Pully set of Extract Motor

Main pully with bush

V Belt set for Main Drive

V Belt set for Counter Drive

Rubber Ring for Door

Contactor, 18A

Contactor, 25A for Heater

Door Nub

Heater with heating element

Repair & maintenance of Hydro Extractor of capacity 15kg of mechanical laundry 25 kg capacity, Make Lucky Engineering Works installed at Military Hospital NDA. including replacement of following unserviceable parts required for smooth functioning.

Rubber Buffer

Spring Set with nut bolt

Timer, 0-15min

Rectifier

Indicator Lamp

Push Button with Element

Door limit Switch

Repair & maintenance of Drying Tumbler of capacity 15kg of mechanical laundry 25 kg capacity, Make Lucky Engineering Works installed at Military Hospital NDA. including replacement of following unserviceable parts required for smooth functioning.

Main Bearing Set

Counter Bearing Set

Heather, 1KW

V Belt Set

M & L for servicing of LT distribution panels (5KVA) of DG set complete cleaning of panel including CTs, and panel Chamber welding of hinges incl replacement of internal wiring with copper wiring (as per existing size wire ) including replacement of thimble as per existing size/ type all as directed by Engr -in charge.

S & F MCB 6 to 32 Amps 10 KA- single pole C-series .Make – L&T//Legrand/Havells /Scheinder.

S & F in repair MCCB, 3 Pole,415 volt - 50 Hz 250 Amps 50 KA as outgoing thermal megnetic release, fixed overload, fixed fault with adjustable magnetic and adjustable thermal release protection for incoming, Make: Legrand/Havells/L&T

S & F Digital voltmeter 96x96mm, 3 ph range 50 to 550volts Make L & T/Havells

S & F Digital ammeter 96x96mm, 3 ph Make L & T/Havells

S & F Pressure gauge 4" dia 0-14 Kg rating complete all as specified and as directed by Engr-in-charge.Make Fiebig/Hiebic/WIKA

M & L for dismantling the Monoblock/open well submersible Pump by taking out old unsv winding wire and storing for reuse and repairing / replacing the unserviceable parts, super enamelled copper winding wire and other winding material including insulator, varnishing, preheating at heat chamber ,reassembling it after repair testing and commissioning the above pump of capacity upto 2HP

Taking down unsv pump in existing postion and supply ,installation and commissioning for automatic pump control 230V 50Hz Max 1MPA Max 10Amp and 1.1 KW in same position complete all as specified and directed.Make : Kirloskar/Nulux

S&F Volt meter 0 – 415 V digital type, Make – AE/Crompton Greaves.or equivellent as approved by GE.

S&F O/L relay 6 to 10 Amps single pole, directly operated. Make- L&T/BCH.

S&F fuse fitting for bolted (BS) type HRC Fuse links of ratting 20 Amps make indoasion /or equivellent in Havells, L&T

S&F Amp meter 0 – 20 Amp digital type, Make – AE/Crompton Greaves.

S&F Battery charging unit 12 V,10 Amp

S&F Indicater lamp

Material and labour for lifting of unserviceable fire hydrant body of single Headed gun metal ISI Marked fire hydrant installed at JCOs,D1,D2,D3 ,E3 area on ground for effective and efficient functioning including repair repalcement of unservicebale parts of fire hydrant kept in exact straight without inclination on the ground is specied and directed and applying the painting of fire hydrant make the surface good . Note :Parts required for replacement shall be measured and paid seperately and the parts to be fit to the existing fire hydrant

Outlet nozzle cap along with chain fixed on hydrant 63mm

Red colour Painting on Fire hydrant and the number plate by scrapping the old surface of apply on the surface making good.

Rubber valve of suitable size is fixed on male coupling 63mm size

Serving of sluice valve all type and size opening greasing running part required new gland fitting and reassemble again complete all as specified and directed Note :Parts required for replacement shall be measured and paid seperately

Grease of Suitable Grade

Gland of suitable size

Brass threaded spindle yoke bolt,wedge ring,seat ring of existing size.(Lathe work deemed in quoted rate)

M&L for servicing, greasing ,Oiling of single Headed Oblique type gun metal fire hydrant valve 63 mmdia 75 mm N .B flanged inlet,with female inst.out let with blank cap and chain .

Taking down of single Headed Oblique type gun metal fire hydrant valve 63 mm dia.

Supply and replacement of single Headed Oblique type gun metal ISI Marked fire hydrant valve 63 mm dia 75 mm N .B flanged inlet,with female inst.out let with blank cap and chain as per IS : 5290 with ISI mark (flange OD 200mm ,PCD 160 mm ,4 Nos X19 mm dia holes). Make: OUST FIRE, Jainex Fire, Nitin Fire, New Age Industries.

Taking down of Female Adaptor gun metal for fire hydrant valve 63 mm dia.

Supply and replacement of female adaptor (Gun metal) suitable for 63 mm dia fire Oblique type fire hydrant valve. Make: Fire solution, Jainex Fire, Nitin Fire, New Age Industries or equivelent,

M&L for painting of DG Set Canopy two coats of powder coated paint as per existing colour by scrapping the old surface of canopy over one coat of red oxide on the surface and making good complete all as spceified as directed

M&L for painting of DG Set Exhaust pipe with two coats of synthetic enamel aluminium paint silver colour paint by scrapping the old surface of exhaust over one coat of red oxide on the surface and making good. complete all as spceified as directed

S&F first aid kit suitable for electrical installations having metal cabinet of suitable size front size openable and first aid symbol and words 'FIRST AID KIT'marked on the front lid and mounting on wall with suitable fastners complete all as specified and directed by Engineer-In-Charge comprising with following items (a)First aid book-1 (b) Burn cream-1 (c) Antiseptic cream 10g- 2 d)Safty Pin 0 size-10 e) Cotton tip applicator -10 f) Adhesive plaster Round 19x72 mm-25 g) Adhesive plaster25x72mm-10 h) Adhesive plaster round -5 i) Knuckle plaster-2 j)Finger tip plaster-2 k) Antiseptic Lotion 100 ml -1 l) Tweezer-SS 7 cm-1 m) Wound Cleaning wipes-ALC-10 n)Antiseptic wipes-10 o)Sterile Gauge swab 10cm-3 p) Sterile Gauge swab 7.5cm-3 q)Sterile Gauge swab 5cm-3 r)Sterile Burn dressing 5cm-1 s)Sterile Gauge swab 10cm-1 t)Sterile Gauge swab 6x10cm -2 u) Gauze bandage 5cmx3mtr-2 v) Abosrbent cotton 20gms-1 w)Elastic gauze bandage 7.5x4m x)Triangular bandage -2 y) Sterile dressing medium -3 z) Sterile oval eye pad-2 aa) Sterile abdominal pad20x25cm-1 ab) Sterile dressing large -3 ac) Crepe bandage 6cmx3mtr-2 ad) Haemostatic absorbable sponge -1 ae) Hand santizer 100ml-1 af) Dusting powder 10g-1 ag)Tincture Iodine 20ml -2 ah) Microporous Tape 1.25x5mt -1 ai) Pain Gel cream-1 aj) Thermal blanket -1 ak)Cotton Tape 1.25x 1mt-1 al)Tourniquet Easy usable-1 am) Scissors 5.5'' tough cut-1 an) Wooden splint-2 ao)Torch light with battery-01 ap)Instant cool pack 50g-2 aq)Breathing mask-02 ar) Gloves Examination-2 as) Sterile Cover for Amputated Part-1, at) Eye/Ear drops -1 au) Electrolyte powder 4.2 gms -5 av) Aspirin tablet 75 mg -14 aw) Paracetmol tablet 500 mg-10 ax) Pastic glass-1 ay) Soft stretcher-01 az) Light Indicator Tester along with tape -1 aaa)Digital Infrared Thermometer of make stanley/Fluke/BPL-1

S & F control wiring of 10 sqmm size two core standered XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 V cables of suitable size properly tagged and secured for indicators/meters etc including suitable size of lugs pvc cable ducts suitable size of glavanised or cadmium plated high tensile nuts bolts and washers etc all as specified and direted.

Providing services whole day for daily maintence, cleaning collecter plate, running and regular checking of solar hot water plant leak free and smooth running of hot water forced circulation system in all bns at NDA Khadakwasla including any minor repair and replacement of spare parts as directed by Engr-in-charge. Note: (i) All work must be adressed on same day of reporting or as directed by dept. (ii) item/spare shall be paid separetely. (iii) Keeping plant neat, clean and leakage proof.

Supply only Pressure booster pump of 1.7/2 HP 415 Volt in same position with proper fitting complete all as specified and directed. Make : Grundfos or equivalent make as per existing.

Supply only Pressure expention tank of capacity 60 ltr suitable for 2 HP pressure pump in same position with proper fitting complete all as specified and directed. Make : Grundfos or equivalent make as per existing.

Supply only Variable frequency drive 3 phase panel suitable for 2 HP pressure pump in same position with proper fitting including timer, contractors and safety relays complete all as specified and directed. Make : Grundfos or equivalent make as per existing.

Supply only Pressure booster/ circulation pump of 0.5 HP 230 Volt in same position with proper fitting complete all as specified and directed. Make : Grundfos or equivalent make as per existing.

Supply only Differential temperature controller suitable for logic, temp. differance between FPC and insulation tank and command to circulation pump complete all as specified and directed. Make : as per existing.

Supply only PT 100 sensor suitable for FPC 125 ltr complete all as specified and directed. Make : as per existing.

Supply only Electrical heater element 3KW single phase of existing size complete all as specified and directed. Make : as per existing.

Supply only thermostat single phase of existing size complete all as specified and directed. Make : as per existing.

Supply only Contactor 4 pole 32 amps single phase type 16 AH complete all as specified and directed. Make : L&T, Schneider, Havells.

Supply only MCB 4 pole 32 amps C-series complete all as specified and directed. Make : L&T, Schneider, Havells.

Supply only MCCB 32-63 Amps 4 pole 16 kA as per existing model complete all as specified and directed. Make : L&T, Schneider, Havells.

Supply only Single phase preventer relay in-built star-delta timer suitable for 360 volt and in-built auto/manual/bypass arrangement complete all as specified and directed. Make : L&T, Schneider, Havells.

Supply only Float switch/ magnetic sensor as per existing size and model complete all as specified and directed.

Supply only air release valve 25 mm dia complete all as specified and directed.

Supply only rubber gasket suitable for solar collecter of outlet 25 mm flange complete all as specified and directed. Make : Champion or equivalent make.

Supply only SS pipe flange suitable for solar collecter of outlet 25 mm complete all as specified and directed.

Taking out old unsv Hot water insulation tank of capacity 1250 LPD in existing position with transporting to workshop for proper brazing and after leakage test installation in same position including necessary insulated with glass wool and steel/aluminium cladings complete all as specified and directed.

Taking out old unsv pump in existing position and Supply, installation and commissioning for Vaccum pump of capacity 3 HP 415 Volt, rotation not less 2840 rpm, insulation type B, air flow rate up to 55.0 cum/hr in same position complete all as specified and directed. Make : Kirloskar,Grundfos or equivalent make as per existing.

S&F Composite PEX-AL-PEX pipes as per ASTM F 1281-2017 of size inner dia 20 mm and outer dia 25 mm complete all as specified and directed. Make : KiTEC or equivalent make.

S&F Composite PEX-AL-PEX pipes as per ASTM F 1281-2017 of size inner dia 25 mm and outer dia 32 mm(2532) complete all as specified and directed. Make : KiTEC or equivalent make.

S&F Composite PEX-AL-PEX pipes as per ASTM F 1281-2017 of size inner dia 32 mm and outer dia 40 mm (3240) complete all as specified and directed. Make : KiTEC or equivalent make.

S&F Composite brass compression fitting equal tee of size 3240 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite compression fitting equal tee of size 3240 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite brass compression fitting equal tee of size 2532 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite compression fitting equal tee of size 2532 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite compression fitting equal band of size 2532 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite compression fitting equal band of size 3240 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite compression fitting reducing tee of size 3240x2532x3240 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Composite compression fitting reducing elbow of size 3240x2532 complete all as specified and directed. Make : KiTEC or equivalent make

S&F Pipes galvanized, “Medium class”, 25 mm dia including all fittings complete all as specified and directed.

S&F Pipes galvanized, “Medium class”, 40 mm dia including fittings complete all as specified and directed.

M & L for LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 X 16sqmm.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for poles, laying of cables, etc. and getting out complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25 Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, FRLS, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit including PVC insulated unsheathed FRLS 4 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed including taking down existing submain wiring.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, FRLS, 2.5 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit including PVC insulated unsheathed FRLS 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed including taking down existing submain wiring.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, FRLS, 1.5 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit including PVC insulated unsheathed FRLS 1.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed including taking down existing submain wiring.

S&F brass ball valve 40mm complete all as specified and directed.

S&F brass ball valve 25mm complete all as specified and directed.

S&F brass NRV 40mm complete all as specified and directed.

S&F brass NRV 25mm complete all as specified and directed.

S&F Air release brass key 12mm complete all as specified and directed.

S&F in repair pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified and directed

S&F in repair for mild steel rolled section connected with each other with welding ( angle ,Tee,channel,beam hollow sections etc) as in main and cross beams ,hip verticle hollow sections and jack rafters ,purlins where connected to common rafters and running rils where vertical sections and fixed in welded in wall sin wall surface with plates and other vertical sections and fixed in ground level embedded in concrete fixed and horizontal sections fixed in wall with bolt completely fixed with angle cleats or other connecting plates conforming to Gde Fe-410-W (Gde E-250)quality -B complete all as speciifed and directed, excavation and cement concrete (1:4:8) is included.

Ditto all as per item No. 276 above but plates (plain/Chequered channels,square cut or notched (ordinary and counter sunk) forming holes with out any attachment

M & L for painting to steel surface over 10cm width or girth with two coats of syntetic enamalled paint over red oxide primer including preparation of surface of any description.

Taking down Unsv existing MCCB, Contactors,time relay,internal wiring connection.

S &F power Contactor 3 pole of 140 Amp and breaking capacity 16kA is specified and directed. Make- L &T/Havells/C&S

S & F ST 100 415V delay time 12 -120 s of Timer relay is as specified and directed Make : L &T/Havells/C&S

S & F Push button and replacing the melted existing internal wiring connection with new wiring of same size is specified and directed.

S & F 4 Pole MCCB 630 A 50KA breaking capacity as specifed and directed. Make - L &T/Havells/C&S

Providing services for comprehensive maint of Oil Fired Incinerator Horizontal Type Single shell Burner burning cap 10 kgs/hrs 99% destruction cap, 220v self supported stacky chimany including any minor repair complete all as directed.

Taking down old unserviceable chain link.

Supply any galvanisd chain link.

Fixing only chain link fencing including all accessories.

M&L for earthing complete with GI earth electrode 600x600x6 mm thick burried directly in ground, earth pit not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.5 mtr below normal ground level connected to both end and incl 32x6 mm GI strip 7.5 Mtr long by means of nut and bolts and washers of GI all as shown in electrical plate No 3 and including necessary exec funnel with wire mesh and GI pipe medium grade 20mm dia & 15 mm dia GI pipe for earth lead PCC chamber with PCC cover 50mm thick incl testing on completion. Note :- 1) The earthing resistance should be below 3Ω. 2) No payment against material at site will be paid. 3) 100% payment shall be made only after completion in all respect and testing of earthing and production of test results below 3Ω. 3) GI strip beyond 7.5 Mtr long shall be measured and paid sperately.4) Excavation in trenches,hard/dense n.exc 1.5m wide and exc 1.5 m in depth and getting out for Earting is included.

Supply and connect in replacement GI strip 32x6 mm in ground/ trench/ wall or such simillar positions.

M&L for glazed wall tiles n exc 5 sqm new tiles of appoved colour to match the colour fitted all as specified and directed

Demolition of cement concrete in ground floor and pavings n.exc 15 cm thickness (unreniforced).

M&L for 75 mm thick cement concrete (1:2:4) (40 mm aggregate )as in sub base concrete of chequered tiles

M&L for chequered glazed cement concrete tiles 20cmx20cmx25mm thick set jointed and pointed in gray cement slurry with pigments in floors over & including 20 mm thick screed bed in cm 1:6

Taking down cement plaster on brick or stone walls etc racking out joints, hacking for key, scrubbing down with water.

M&L for dry sand cushioing to under ground cable intrenches incl spreading, leveling and hand punning complete all specified. Note : For measurement purpose punned thickness shall be considered.

Supplying and laying reinforced precast concrete cable cover , class LH ,Type 1 , flat ,size 250mm x 150mmx 40mm

Demolition of PCC block massonry building cement mortor all as directed

M&L for precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate) block massonry with sollid block exc 10cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified.

Providing services for comprehensive maint of Fire Alarm System consisting of Control Panel, Mannual Call Point, Heat & Smoke Detector, Hooter, wiring of armoured sigle core cable installed at various location as and when required including any minor repair for making complete system in healty and working condition and submitting Testing report complete all as directed. Note :Spare Part required for replacement will be paid & measured seperatly.

S&F smoke & Heat Detector photoelectric type, low pprofile design low current draw wide operating voltage 8 to 30V DC, Bicolour LED detector status indicator Automatic drift compensation Programmable sensitivity plus base for mounting of standerd material all as specified & directed. Make. As approved by GE

S&F red Mini Horn UL certified complete all as specified & directed.

S&F addressable call point with LED & resistor ( 470 OHM) flush Mouting flexi element with back box complete all as specified & directed.

S&F armoured cable 2 core for Fire Alarm System of 2.5sqmm copper conductor or suitable size for above Control Panel including taking down exisiting cable.

Sneha Aircool

SBS Enterprises

M/s Harshal Traders