Repair/maint of pumping machinery, maint cleaning of swimming pool, UG sumps and OH tank cleaning, servicing of chloronomes plants, supply only deficient such as Water Supply Installation at MIRC under GE (S) Ahmednagar

Amount

Dewatering, cleaning of OH reservoirs' with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , Sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder / Liquid Chlorine, wash with fresh water, drying up, applying one coat of anti-fungal Cement Paint on internal surface incl marking / writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of height 50 mm height and 40 mm width complete all as specified & directed for the following Capacities:-

(a) 200000 Gallons (RCC), 60' staging, inside MIRC complex near Gate No.3

(b) 100000 Gallons (RCC), 60' staging, inside MIRC at Golf Ground near JCO's MD Accns

(c) 27500 Gallons (RCC), 60' staging, inside MIRC at MAP near OR's MD Accns

(d) 50000 Gallons (RCC), 60' staging, inside PH complex near Gate No. 3 at MIRC

(e) 20000 Gallons (RCC), 45' staging, near Harpal Stadium at MIRC

(f) 10000 Gallons (Steel), 40' staging, inside PH complex near Gate No. 3 at MIRC

All as item No1above but for following semi UG Sumps

(a) 300000 gallons (RCC), Cylindrical Curved Roof, inside PH complex near Gate No. 3 at MIRC

(b) 100000 gallons (RCC), Cuboids, inside PH complex near Gate No. 3 at MIRC

(c) 27500 Gallons (RCC), Cuboids, inside PH complex near Gate No. 3 at MIRC

Taking LT shutdown, Dismantle and remove the Submersible Suction Sweeper 2HP, 415 V, 2750RPM, Make Modi, Model B-200 Pump set from existing foundation / position, Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, Varnishing, Heating, Drying etc, replacing coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified & directed.

(a) Supply only Submersible flexible cable with multistranded copper conductor, PVC insulated and overall PVC sheathed, 4 core, 1100 Volts grade, 2.5 Sqmm.

(b) Supply only Nylon braided UPVC flexible hose pipe, heavy grade, 50mm OD with two nose clips. Make: Finolex

(c) Supply only PVC cylindrical pool float plastic type, high density, double hook, suitable for sustaining hose & cable above water during suction sweeping.

(d) Supply only Nylon rope 20 mm dia, best quality for operation of suction sweeper

(e) Supply only Nylon brushes (700 x 100mm) as per and suitable for Submersible Suction Sweeper , 2HP, Make Modi, Model B-200, best quality.

Supply and provide with manufacturer's test certificate, Rubber Matting conforming to IS, 1100 Volts grade of size 2.0m x 1.0m and 10mm thick , ISI marked.

Star coupling, Heavy Duty, Styrene Butadiene Rubber suitable for 20/25/30/50/75 HP pump or motor, including taking down old U/S all as specified & directed.

Taking LT shutdown, Dismantle and remove the motor of the mono block / coupled Pump set from existing foundation / position, Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, Varnishing, Heating, Drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running for following electric motor all as specified & directed :-

All as per item 6 above but 50 HP

All as per item 6 above but 25 HP

All as per item 6 above but 15 HP

All as per item 6 above but 10 HP

All as per item 6 above but 7.5 HP

All as per item 6 above but 5 HP

All as per item No 6 above but 1 HP Air Compressor Motor

All as per item No 6 above and Suitable parts for 50 HP pumps

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

All as per item No 6 above and Suitable parts for 25 HP pumps

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

All as per item No 6 above and Suitable parts for 15 HP pumps

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

All as per item No 6 above and Suitable parts for 10 HP pumps

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

All as per item No 6 above and Suitable parts for 7.5 HP pumps

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

All as per item No 6 above and Suitable parts for 5 HP pumps

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

All as per item No 6 above and Suitable parts for 1 HP Air compressor motor

(a) CI impeller

(b) Bearing

(c) Bearing end plate

(d) MS shaft

(e) MS coupling

(f) Seal

(g) Motor fan

(h) Bush

Taking out submersible pump/Deep Borewell set single phase 1.5/3/5 HP with Tripot & chain pully block shifting to authorized workshop for the repair work, removing the burnt winding and impeller, re-winding the motor with super enameled copper wire and replace uservicable impeller of the size equivalent and same refix and put into bore well all as specified & directed.

Taking LT shutdown, Dismantle and remove the motor of the mono block / coupled MUD Pump set from existing foundation / position (Including drain out sewage water from sump through honey sucking machine) Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, Varnishing, Heating, Drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running for 10 HP electric motor all as specified & directed.

Single phase DOL starter and all components suitable for 1.5/3/5HP submersible pump set Make Havells, CG, L&T.

Three phase DOL starter and all components suitable for 1.5/3/5 HP submersible pump set Make Havells, CG, L&T.

Single phase/Three phase preventer suitable for Fully automatic Star / Delta starter or Direct - on - Line starter. Make: Schneider / Minilec / L&T, including taking down old serviceable all as specified and directed.

Fully automatic Star / Delta starter in sheet metal enclosure with Single Phase/Three phase Protection feature (Motor Rating AC - 3 Duty, 415V, 50Hz, 3Ph) suitable for 25 HP pumpset having relay range 20 - 33 Amps. Make: Schneider / L&T including taking down old serviceable all as specified and directed.

All as per Item No 26 above but Direct - on - Line starter suitable for 10HP motor, having relay range 9 - 15 Amps.

Pressure Guage, stem with dual dial type, 0 - 7Kg / Sqcm and 0 - 100 Lb / Sqin

Overhauling / Servicing of Heavy duty Steel, Horizontal, cylindrical type, Pressure Media Filter having a capacity of 60000 GPH of Make: GD Malhotra by opening up the two man hole covers, removing the complete filter media (different size Stone pebbles and quartz sand) from the chamber to a safe place at outside, cleaning the internal surface by scrubbing with steel wire brush, high pressure water jet to remove all scales, mosses, algae, dirt, deposits and other sediments thoroughly and removal of dirty water by flushing out through drain system and sterilizing the complete internal surface of the filter tank using lime wash / Liquid Chlorine. Loosen the threading and remove 36Nos x 1Mtr long, 50mm dia PVC porous pipe from the GI Tee equals placed at bottom centre of the filter chamber and replace it with CPVC pipe. Replace the corroded GI Tee Equals complete all as specified and directed.

Drying up the internal surface of the filter tank, preparing surface using suitable sand paper, remove the corrosion completely, filling the cavities or holes by welding /soldering including all extra material/mild steel plate used for welding purpose, smoothening the surface, applying two coats of finishing black bituminous paint over a coat of anti-corrosive metal primer and pressure testing after all welding/soldering process check completely after full on load and filling completely with water and material complete all as specified and directed.

Supply only CPVC pipe, SDR13.5, 50mm outer dia 1Mtr long , duly drilled holes, one end with threaded adaptor and other end closed with suitable cap all as specified and directed.

Labour only for Refilling the filter chamber for a height of 75mm with graded white quartzes (Pebbles) of size 50 to 60mm by cleaning, wash thoroughly in fresh water after a rubbing wash in lime soda ash solution etc complete all as specified and directed.

All as per item No 32 above but with 25 - 40mm for a height of 10cm

All as per item No 32 above but with 15 - 20mm for a height of 10cm

All as per item No 32 above but with 06 - 12.5mm for a height of 20cm

All as per item No 32 above but with 03 - 05mm for a height of 20cm

All as per item No 32 above but with graded white quartzes coarse sand of grade 1.5 - 2.5mm for a height of 20cm

All as per item No 32 above but with 0.50 - 1.4mm for a height of 40cm

Graded white quartzes coarse sand of grade 1.5 - 2.5mm all as specified and directed.

All as per item No 39 above but with 0.50 - 1.4mm

Labour only for Emptying the swimming pool (L - 50M, W - 21M, Shallow end D - 1M and Deep end D - 1.8m), Diving pool (L - 50M, W - 21M, D - 4.8M), including Scum channel, Connecting channel, Supply duct etc. Take out the grills of man holes, Remove all mosses, algae, dirt, deposits, sediments and sludge. Scrub and clean wall / floor / scum channel tiles with nylon wire brush, remove dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance. Wash entire swimming / Diving pool, including Scum channel, Connecting channel, Supply duct etc with lime soda ash solution / hydrochloride acid. Sterilize the complete internal surface using Liquid Chlorine. Wash with fresh water, drying up, complete all as specified and directed.

Labour only for Emptying the balancing tank and Water Cascade, Removing all mosses, algae, dirt, deposits, sediments and sludge, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including Sterilizing the complete internal surface of the tank / cascade by using ISI mark Gd I bleaching powder / Liquid Chlorine, wash with fresh water, drying up, applying one coat of anti-fungal paint on internal surface and applying one coat of exterior weather coat cement paint on external surface complete all as specified and directed.

Labour only for filling the swimming pool / Diving pool / balancing tank with fresh water, operating the filter media pump set, carrying out back washing of filter media, aerating by operating air blower, Suction sweeping of swimming pool at various stages of filling with water after adding chemicals, carryout the filtration of pool water for 8Hrs continuously, carryout PH test and ppm test of pool water complete all as specified and directed.

Supply only chlorine gas in 100/50 kg cylinder including disconnection and reconnection at site as directed by Engineer-in-charge. Note (i):All safety precations to be taken to avoid gass leakage (ii) Rate quoted deemed to include rent for cylinder

Supply only Calcium based chlorine granular form chlorine contain 60-65%. Make : Aqua fit/ Sathya Sai Cal GP / Decliback Altoch-GP.

Supply only Soda Ash

Supply only Non Ferric Alum

Supply only Copper Sulphate

Supply only Cationic polyelectrolyte liquid 12% chlorine make : OCEAN CHEMICALS pune

Supply only Sodium hypochloride liquid 12% chlorine make : OCEAN CHEMICALS pune

Supply only Roundup Chemical for in Liquid form for cleaning purpose of pump house

Repairs and servicing of chloronome plant gaseas type 200gms/hour capacity located at the following location all as directed by the Engineer-in-Charge. Note : (i) The servicing is to be carried out monthly. (ii) The rates for the following items is inclusive of attending immidiately the chloronome plants as & when required at site to stop leakages and to be repaired immediately Note : Servicing to be carried out through authorised rep.

(a) Pump house near Gate No. 3 MIRC - 01 Nos.

(b) Swimming pool MIRC - 01 Nos.

(c) Map Phase 2 Pump house at Gate No. 3 MIRC - 01 Nos.

Moisture trap/ GlassNRVas per Part No SSAPS-1004

Cylindr Key Part No SPAS 1025

Chlorine flow meter up to 1 Kg / hr SSAPS-1033

Chlorine Mixing chamber Part No SSPAS 1010

Primary filter as existing at site and all as specified and directed.

Safety loop 'U' bend as existing at site and all as specified and directed.

PP diaphragm valve for water inlet and outlet of dia 15mm all as specified and directed.

Heavy duty PVC pipe for chlorine solution outlet of dia 20mm all as specified and directed.

Supply only ammonia solution for checking of chlorine gas leakages and plants in 500ml bottls. Make : NICE/Glaxo.

Supply only water testing kit including litmas papers and chemical

Supply only Waterproof Digital pH Meter Range 0.0 - 14.0 pH Model Name/Number: Phtestr30 EUTECH INSTRUMENTS With two year warranty

Stainless steel ladder 30 feet length suitable for UG sump of size of members as per existing all as specified and directed

Taking down carefully existing unservicable electric water level Indicator from OHT/ UG SUMPS and repairing the same by replacing nodes,sensor,Service cable,existing MCB, Monitor etc as required and proper fixing arrangements all as specified and directed.

Preparation of surfaces of all pumps/motor/ NRVs/ Sluice Valves and connected pipeline with sumps/Ladder and motor etc installed at MIRC pump house complete in all 4 rooms of pump house, removing the corosion completely using suitable sand paper, filling the cavities or holes by welding / soldering as required, smoothening the surface and applying two coats of Blue synthetic enamel paint over a coat of anti-corrosive metal primer complete all as specified and directed.

MS. G.A. CONSTRUCTION

m/s shivam tools and equipment

BHAVIN INFRA

Maruti Abhiyantriki

M/s UKO SYSTEMS