Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹91.4 LAccepted-AOC | 1 | Accepted-AOC Accepted | |
| 2 | 2₹1.0 Cr+₹8.8 L (9.25%)Rejected-AOC NO 64 PASUPATHI STREET JEEVA NAGAR MAIN ROAD SELLUR MADURAI 625 002 | MADURAI | MADURAI | TAMIL NADU | 625002 | 2 | Rejected-AOC Rejected |
Tender Value
₹92.1 L
EMD Value
₹56,100
Closing Date
25 Mar 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Joint Commissioner/Executive Officer
Joint Commissioner / Executive Officer, Arulmigu Dhandayuthapani Swamy Temple, Palani
Renovation Work For Kurinji Hostel Block In Arulmigu Palaniandavar Womens College At Chinnakalaiyamuthur, Palani, Dindigul District
2025_HRCE_530898_1
26/2024-2025-2
Open Tender
Civil Works - Buildings
Lump-sum
365 days
Chinnakalaiyamuthur
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹56,100
1 May 2025
7 Mar 2025
25 Mar 2025
7 Mar 2025
25 Mar 2025
18 Mar 2025
Amount
Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls for plain Cement concrete for grill fixing
Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls for Brick / stone masonry in Cement mortar walls under 3m high
Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls for One course of pressed tile roof finish in Cement Mortar
Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 20mm thick using chicken mesh in all floors including of Clean removal of Cement plaster from walls and curing etc. complete complying with standard specification and as directed by the departmental officers.
Plastering with Cement Mortar 1:3 (One cement and Five Plastering sand), 20mm thick in all floors including clean removal of cement plaster & curing etc. complete complying with standard specification and as directed by the departmental officers.
Providing granolithic floor finish of the 20mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
Finishing the top of roof with one course of machine pressed new tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Laying the top of roof with one course of old tiles machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Supplying, Fabricating and Placing in position Mild steel/ Ribbed Tor steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. Complete complying with standard specification. (Contractoe has to make his own arrangements for the supply of steel and binding wire)
Supplying and application of Galvashield XP Sacrificial anode to steel reinforcement as per specification including all cost of materials,labour charges,transportation and all conveyance charges etc,complete
Expose the existing reinforcement bars fully in the repair area and remove all loose scale and corrosion deposits. Mix the base and Hardener of the antocorrosive primer Nitozinc Primer mechanically using a slow speed heavy duty drilling machine and applying over the reinforcement bars using a suitable brush including all cost of materials,labour charges,transportation and all conveyance charges etc,complete
Supply and application of Nitobond EP Epoxy bonding agent over the old concrete surfaces as abonding agent for the replacement Micro Concrete complete as per specification including all cost of materials,labour charges,transportation and all conveyance for charges etc,complete
Supply of slurry tight form work which should not deform or leak due to pressure of micro concrete shall be fabricated and erected in position. Provision should be made for a suitable feed hopper for pouring micro concrete. The form work should be coated with the Reebol mould releasing agent prior to final fixing in position. Proper supporting arrangements to be made for keeping the shutter in correct line and length complete including all cost of materials,labour charges,transportation and all conveyance charges etc,complete
Supply and application of Rendroc RG micro Concrete with 12 mm down graded chips on pit to enable complete of pouring in a continuous operation. With concrete mixer. Exact quantity of water as recommended by Fosroc Should be poured in to mixing vessel and added the Rendroc RG and chips slowly and mix the same thoroughly in a forced action. The mixed material should be placed immediately into the positioned form work continuously without any gap complete including all cost of materials,labour charges,transportation and all conveyance charges etc,complete
Drilling of 10mm,16mm,20mm,24mm dia holes to a depth of 60-70mm on the outer surface of the column ,beam at 500mm c/c both vertically and horizontally as per the drawings,for fixing shear keys L shaped (75 x 300 mm) anchor grout lokfix and fixing of reinforcement to these shear connectore by tying / welding including all cost of materials,labour charges,transportation and all conveyance charges etc,complete
Providing water proofing treatment for damaged roof surface remover the old damaged concrete and rust remover one coat and one coat superlatex& fevimate xl one coat and packing the roofing area plastering by micro concrete mix sand,cement,and LW oil and two coat of pedipean 2K Chemical including labour charges ,material cost,transportation, etc,complete
supplying and fixing of oranamental grill gate using rectangular tubes,square tubes,flower design and square rod,locking arrangements as per design including one coat of red oxide primer,including all cost of materials and conveyance labour charges cutting and welding etc,complete.
Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coat of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Painting old wood work with one finishing coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Supplying and fixing of furniture fittings including cost of materials,labour charges,transportation and all conveyance charges etc,complete.
Aldrop 250 x 16mm ,
Handles "D" type 150mm long
Tower Bolts 200mm long and 12mm dia
Tower Bolts 150mm long and 12mm dia
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required 110mm diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
Sub Total
BHAVADHARANI BUILDERS (BID ID -1278525)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_632003.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .